- 23 Sep, 2024 8 commits
-
-
Rob Herring (Arm) authored
There's no need to list "tc3589x" in the DT match table. The I2C core will strip any vendor prefix and match against the i2c_device_id table which has an "tc3589x" entry. Probably "tc3589x" and TC3589X_UNKNOWN could be removed altogether. Use of that compatible was only on some STE platforms and was dropped in 2013. There were ABI breaks in 2014 claiming no DTs in the wild. See commit 1637d480 ("pinctrl: nomadik: force-convert to generic config bindings"). Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20240826191300.1410222-1-robh@kernel.orgSigned-off-by:
Lee Jones <lee@kernel.org>
-
Jinjie Ruan authored
Avoids the need for manual cleanup of_node_put() in early exits from the loop. Signed-off-by:
Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20240826092734.2899562-3-ruanjinjie@huawei.comSigned-off-by:
-
Jinjie Ruan authored
Avoids the need for manual cleanup of_node_put() in early exits from the loop. Signed-off-by:
-
Hans de Goede authored
There are 2G and 4G RAM versions of the Lenovo Yoga Tab 3 X90F and it turns out that the 2G version has a DMI product name of "CHERRYVIEW D1 PLATFORM" where as the 4G version has "CHERRYVIEW C0 PLATFORM". The sys-vendor + product-version check are unique enough that the product-name check is not necessary. Drop the product-name check so that the existing DMI match for the 4G RAM version also matches the 2G RAM version. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Andy Shevchenko <andy@kernel.org> Link: https://lore.kernel.org/r/20240825132617.8809-1-hdegoede@redhat.comSigned-off-by:
-
Tzung-Bi Shih authored
The module description can be backtracked to commit e7c256fb ("platform/chrome: Add Chrome OS EC userspace device interface"). The description became out-of-date after a bunch of changes e.g: - commit 5668bfdd ("platform/chrome: cros_ec_dev - Register cros-ec sensors"). - commit ea01a31b ("cros_ec: Split cros_ec_devs module"). - commit 5e011558 ("cros_ec: Move cros_ec_dev module to drivers/mfd"). Update the description. Signed-off-by:
Tzung-Bi Shih <tzungbi@kernel.org> Link: https://lore.kernel.org/r/20240822121539.4265-1-tzungbi@kernel.orgSigned-off-by:
-
Tzung-Bi Shih authored
Simplify cros_ec_dev_init() by the following changes: - Get rid of label `failed_devreg`. - Remove a redundant space and comment. - Use `if (ret)` instead of `if (ret < 0)`. Signed-off-by:
-
Liao Chen authored
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by:
Liao Chen <liaochen4@huawei.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240814025710.3875859-1-liaochen4@huawei.comSigned-off-by:
-
Detlev Casanova authored
The ArmSoM Sige 5 board connects the rk806 PMIC on an i2c bus. Signed-off-by:
Detlev Casanova <detlev.casanova@collabora.com> Link: https://lore.kernel.org/r/20240802134736.283851-1-detlev.casanova@collabora.comSigned-off-by:
-
- 30 Aug, 2024 31 commits
-
-
Siddharth Vadapalli authored
The ACSPCIE_PROXY_CTRL registers within the CTRL_MMR space of TI's J784S4 SoC are used to drive the reference clock to the PCIe Endpoint device via the PAD IO Buffers. Add the compatible for allowing the PCIe driver to obtain the regmap for the ACSPCIE_CTRL register within the System Controller device-tree node in order to enable the PAD IO Buffers. The Technical Reference Manual for J784S4 SoC with details of the ASCPCIE_CTRL registers is available at: https://www.ti.com/lit/zip/spruj52Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Acked-by:
-
Wilken Gottwalt authored
The driver was removed after kernel 6.2 rendering the header file unused. Signed-off-by:
Wilken Gottwalt <wilken.gottwalt@posteo.net> Link: https://lore.kernel.org/r/ZpTbGHb6EX2Oe7ok@monster.localdomainSigned-off-by:
-
Lukas Bulwahn authored
Commit f53d3efa ("MAINTAINERS: Add myself for Marvell 88PM886 PMIC") adds a file entry referring to drivers/regulators/88pm886-regulator.c, but the directory is actually called drivers/regulator. Note that there is no 's' at the end. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair the file entry in the MARVELL 88PM886 PMIC DRIVER section. Fixes: f53d3efa ("MAINTAINERS: Add myself for Marvell 88PM886 PMIC") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@redhat.com> Reviewed-by:
Karel Balej <balejk@matfyz.cz> Link: https://lore.kernel.org/r/20240711065140.140703-1-lukas.bulwahn@redhat.comSigned-off-by:
-
Chen Ni authored
Replace a comma between expression statements by a semicolon. Signed-off-by:
Chen Ni <nichen@iscas.ac.cn> Link: https://lore.kernel.org/r/20240709031824.585922-1-nichen@iscas.ac.cnSigned-off-by:
-
Krzysztof Kozlowski authored
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by:
-
Krzysztof Kozlowski authored
Allocate the memory with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by:
-
Javier Carrasco authored
`sprd_pmic_regmap` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Reviewed-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Link: https://lore.kernel.org/r/20240704-mfd-const-regmap_config-v2-24-0c8785b1331d@gmail.comSigned-off-by:
-
Javier Carrasco authored
`regmap_mc13xxx_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`gsc_regmap_bus` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`twl6040_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps65912_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps65910_irq_chip` and `tps65911_irq_chip` are not modified and can be declared as const to move their data to a read-only section. The pointer used to reference those structs has also been converted to const. Signed-off-by:
-
Javier Carrasco authored
`tps65219_irqs` and `tps65219_irq_chip` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps65218_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps65090_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps65086_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`bd718xx_irq_chip` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/20240704-mfd-const-regmap_config-v2-14-0c8785b1331d@gmail.comSigned-off-by:
-
Javier Carrasco authored
The regmap_irq and regmap_irq_chip structs are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
The regmap_irq_chip structs are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
The regmap_bus, regmap_irq and regmap_irq_chip structs are not modified and can be declared as const to move their data to a read-only section. The pointer to reference the regmap_irq_chip structs has been converted to const. Signed-off-by:
-
Javier Carrasco authored
The regmap_irq_chip structs are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`bd9571mwv_irq_chip` and `bd9574mwf_irq_chip` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`pm800_irq`, `pm805_irq` and `pm805_irq_chip` are not modified and can be declared as const to move their data to a read-only section. In order to keep the const modifier for the regmap_irq_chip structures, the pointer used to reference them must be converted to const as well. Signed-off-by:
-
Javier Carrasco authored
`m10bmc_pmci_regmap_config` and `intel_m10bmc_regmap_config` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`bd957x_regmap`, `bd9576_irqs` and `bd9576_irq_chip` are not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`tps6105x_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`wcd934x_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`hi655x_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`mx25_tsadc_regmap_config` is not modified and can be declared as const to move its data to a read-only section. Signed-off-by:
-
Javier Carrasco authored
`da9061_regmap_{config,irq,irq_chip}` and `da9062_{config,irq,irq_chip}` are not modified and can be declared as const to move their data to a read-only section. Signed-off-by: -
Lee Jones authored
-
- 29 Aug, 2024 1 commit
-
-
Chris Morgan authored
Add support for the AXP717 PMIC to utilize the ADC (for reading voltage, current, and temperature information from the PMIC) as well as the USB charger and battery. Signed-off-by:
Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20240821215456.962564-12-macroalpha82@gmail.comSigned-off-by:
-
