- 25 Apr, 2013 35 commits
-
-
Boris Ostrovsky authored
commit 511ba86e upstream. Invoking arch_flush_lazy_mmu_mode() results in calls to preempt_enable()/disable() which may have performance impact. Since lazy MMU is not used on bare metal we can patch away arch_flush_lazy_mmu_mode() so that it is never called in such environment. [ hpa: the previous patch "Fix vmalloc_fault oops during lazy MMU updates" may cause a minor performance regression on bare metal. This patch resolves that performance regression. It is somewhat unclear to me if this is a good -stable candidate. ] Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: http://lkml.kernel.org/r/1364045796-10720-2-git-send-email-konrad.wilk@oracle.comTested-by:
Josh Boyer <jwboyer@redhat.com> Tested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Samu Kallio authored
commit 1160c277 upstream. In paravirtualized x86_64 kernels, vmalloc_fault may cause an oops when lazy MMU updates are enabled, because set_pgd effects are being deferred. One instance of this problem is during process mm cleanup with memory cgroups enabled. The chain of events is as follows: - zap_pte_range enables lazy MMU updates - zap_pte_range eventually calls mem_cgroup_charge_statistics, which accesses the vmalloc'd mem_cgroup per-cpu stat area - vmalloc_fault is triggered which tries to sync the corresponding PGD entry with set_pgd, but the update is deferred - vmalloc_fault oopses due to a mismatch in the PUD entries The OOPs usually looks as so: ------------[ cut here ]------------ kernel BUG at arch/x86/mm/fault.c:396! invalid opcode: 0000 [#1] SMP .. snip .. CPU 1 Pid: 10866, comm: httpd Not tainted 3.6.10-4.fc18.x86_64 #1 RIP: e030:[<ffffffff816271bf>] [<ffffffff816271bf>] vmalloc_fault+0x11f/0x208 .. snip .. Call Trace: [<ffffffff81627759>] do_page_fault+0x399/0x4b0 [<ffffffff81004f4c>] ? xen_mc_extend_args+0xec/0x110 [<ffffffff81624065>] page_fault+0x25/0x30 [<ffffffff81184d03>] ? mem_cgroup_charge_statistics.isra.13+0x13/0x50 [<ffffffff81186f78>] __mem_cgroup_uncharge_common+0xd8/0x350 [<ffffffff8118aac7>] mem_cgroup_uncharge_page+0x57/0x60 [<ffffffff8115fbc0>] page_remove_rmap+0xe0/0x150 [<ffffffff8115311a>] ? vm_normal_page+0x1a/0x80 [<ffffffff81153e61>] unmap_single_vma+0x531/0x870 [<ffffffff81154962>] unmap_vmas+0x52/0xa0 [<ffffffff81007442>] ? pte_mfn_to_pfn+0x72/0x100 [<ffffffff8115c8f8>] exit_mmap+0x98/0x170 [<ffffffff810050d9>] ? __raw_callee_save_xen_pmd_val+0x11/0x1e [<ffffffff81059ce3>] mmput+0x83/0xf0 [<ffffffff810624c4>] exit_mm+0x104/0x130 [<ffffffff8106264a>] do_exit+0x15a/0x8c0 [<ffffffff810630ff>] do_group_exit+0x3f/0xa0 [<ffffffff81063177>] sys_exit_group+0x17/0x20 [<ffffffff8162bae9>] system_call_fastpath+0x16/0x1b Calling arch_flush_lazy_mmu_mode immediately after set_pgd makes the changes visible to the consistency checks. RedHat-Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=914737Tested-by:
Krishna Raman <kraman@redhat.com> Signed-off-by:
Samu Kallio <samu.kallio@aberdeencloud.com> Link: http://lkml.kernel.org/r/1364045796-10720-1-git-send-email-konrad.wilk@oracle.comTested-by:
-
Namhyung Kim authored
commit 83e03b3f upstream. On the failure path, stat->start and stat->pages will refer same page. So it'll attempt to free the same page again and get kernel panic. Link: http://lkml.kernel.org/r/1364820385-32027-1-git-send-email-namhyung@kernel.org Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Linus Torvalds authored
commit 386afc91 upstream. In UP and non-preempt respectively, the spinlocks and preemption disable/enable points are stubbed out entirely, because there is no regular code that can ever hit the kind of concurrency they are meant to protect against. However, while there is no regular code that can cause scheduling, we _do_ end up having some exceptional (literally!) code that can do so, and that we need to make sure does not ever get moved into the critical region by the compiler. In particular, get_user() and put_user() is generally implemented as inline asm statements (even if the inline asm may then make a call instruction to call out-of-line), and can obviously cause a page fault and IO as a result. If that inline asm has been scheduled into the middle of a preemption-safe (or spinlock-protected) code region, we obviously lose. Now, admittedly this is *very* unlikely to actually ever happen, and we've not seen examples of actual bugs related to this. But partly exactly because it's so hard to trigger and the resulting bug is so subtle, we should be extra careful to get this right. So make sure that even when preemption is disabled, and we don't have to generate any actual *code* to explicitly tell the system that we are in a preemption-disabled region, we need to at least tell the compiler not to move things around the critical region. This patch grew out of the same discussion that caused commits 79e5f05e ("ARC: Add implicit compiler barrier to raw_local_irq* functions") and 3e2e0d2c ("tile: comment assumption about __insn_mtspr for <asm/irqflags.h>") to come about. Note for stable: use discretion when/if applying this. As mentioned, this bug may never have actually bitten anybody, and gcc may never have done the required code motion for it to possibly ever trigger in practice. Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: drop sched_preempt_enable_no_resched()] Signed-off-by:
-
Alban Bedel authored
commit f1ca493b upstream. The Charge Pump needs the DSP clock to work properly, without it the bypass to HP/LINEOUT is not working properly. This requirement is not mentioned in the datasheet but has been confirmed by Mark Brown from Wolfson. Signed-off-by:
Alban Bedel <alban.bedel@avionic-design.de> Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Wei Yongjun authored
commit 3480a212 upstream. Memory allocated by kmem_cache_alloc() should be freed using kmem_cache_free(), not kfree(). Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Huacai Chen authored
commit 6f389a8f upstream. As commit 40dc166c (PM / Core: Introduce struct syscore_ops for core subsystems PM) say, syscore_ops operations should be carried with one CPU on-line and interrupts disabled. However, after commit f96972f2 (kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()), syscore_shutdown() is called before disable_nonboot_cpus(), so break the rules. We have a MIPS machine with a 8259A PIC, and there is an external timer (HPET) linked at 8259A. Since 8259A has been shutdown too early (by syscore_shutdown()), disable_nonboot_cpus() runs without timer interrupt, so it hangs and reboot fails. This patch call syscore_shutdown() a little later (after disable_nonboot_cpus()) to avoid reboot failure, this is the same way as poweroff does. For consistency, add disable_nonboot_cpus() to kernel_halt(). Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jan Kiszka authored
commit 5000c418 upstream. If we reenable ftrace via syctl, we currently set ftrace_trace_function based on the previous simplistic algorithm. This is inconsistent with what update_ftrace_function does. So better call that helper instead. Link: http://lkml.kernel.org/r/5151D26F.1070702@siemens.comSigned-off-by:
Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by:
-
Thomas Gleixner authored
commit a1cbcaa9 upstream. The sched_clock_remote() implementation has the following inatomicity problem on 32bit systems when accessing the remote scd->clock, which is a 64bit value. CPU0 CPU1 sched_clock_local() sched_clock_remote(CPU0) ... remote_clock = scd[CPU0]->clock read_low32bit(scd[CPU0]->clock) cmpxchg64(scd->clock,...) read_high32bit(scd[CPU0]->clock) While the update of scd->clock is using an atomic64 mechanism, the readout on the remote cpu is not, which can cause completely bogus readouts. It is a quite rare problem, because it requires the update to hit the narrow race window between the low/high readout and the update must go across the 32bit boundary. The resulting misbehaviour is, that CPU1 will see the sched_clock on CPU1 ~4 seconds ahead of it's own and update CPU1s sched_clock value to this bogus timestamp. This stays that way due to the clamping implementation for about 4 seconds until the synchronization with CLOCK_MONOTONIC undoes the problem. The issue is hard to observe, because it might only result in a less accurate SCHED_OTHER timeslicing behaviour. To create observable damage on realtime scheduling classes, it is necessary that the bogus update of CPU1 sched_clock happens in the context of an realtime thread, which then gets charged 4 seconds of RT runtime, which results in the RT throttler mechanism to trigger and prevent scheduling of RT tasks for a little less than 4 seconds. So this is quite unlikely as well. The issue was quite hard to decode as the reproduction time is between 2 days and 3 weeks and intrusive tracing makes it less likely, but the following trace recorded with trace_clock=global, which uses sched_clock_local(), gave the final hint: <idle>-0 0d..30 400269.477150: hrtimer_cancel: hrtimer=0xf7061e80 <idle>-0 0d..30 400269.477151: hrtimer_start: hrtimer=0xf7061e80 ... irq/20-S-587 1d..32 400273.772118: sched_wakeup: comm= ... target_cpu=0 <idle>-0 0dN.30 400273.772118: hrtimer_cancel: hrtimer=0xf7061e80 What happens is that CPU0 goes idle and invokes sched_clock_idle_sleep_event() which invokes sched_clock_local() and CPU1 runs a remote wakeup for CPU0 at the same time, which invokes sched_remote_clock(). The time jump gets propagated to CPU0 via sched_remote_clock() and stays stale on both cores for ~4 seconds. There are only two other possibilities, which could cause a stale sched clock: 1) ktime_get() which reads out CLOCK_MONOTONIC returns a sporadic wrong value. 2) sched_clock() which reads the TSC returns a sporadic wrong value. #1 can be excluded because sched_clock would continue to increase for one jiffy and then go stale. #2 can be excluded because it would not make the clock jump forward. It would just result in a stale sched_clock for one jiffy. After quite some brain twisting and finding the same pattern on other traces, sched_clock_remote() remained the only place which could cause such a problem and as explained above it's indeed racy on 32bit systems. So while on 64bit systems the readout is atomic, we need to verify the remote readout on 32bit machines. We need to protect the local->clock readout in sched_clock_remote() on 32bit as well because an NMI could hit between the low and the high readout, call sched_clock_local() and modify local->clock. Thanks to Siegfried Wulsch for bearing with my debug requests and going through the tedious tasks of running a bunch of reproducer systems to generate the debug information which let me decode the issue. Reported-by:
Siegfried Wulsch <Siegfried.Wulsch@rovema.de> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1304051544160.21884@ionosSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: adjust filename] Signed-off-by:
-
Michael Wolf authored
powerpc: pSeries_lpar_hpte_remove fails from Adjunct partition being performed before the ANDCOND test commit 9fb26401 upstream. Some versions of pHyp will perform the adjunct partition test before the ANDCOND test. The result of this is that H_RESOURCE can be returned and cause the BUG_ON condition to occur. The HPTE is not removed. So add a check for H_RESOURCE, it is ok if this HPTE is not removed as pSeries_lpar_hpte_remove is looking for an HPTE to remove and not a specific HPTE to remove. So it is ok to just move on to the next slot and try again. Signed-off-by:
Michael Wolf <mjw@linux.vnet.ibm.com> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Jay Estabrook authored
commit aa8b4be3 upstream. Fixes a NULL pointer dereference at boot on UP1500. Reviewed-and-Tested-by:
Matt Turner <mattst88@gmail.com> Signed-off-by:
Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by:
Michael Cree <mcree@orcon.net.nz> Signed-off-by:
-
Eldad Zack authored
commit 889d6684 upstream. The usb_control_msg() function expects __u16 types and performs the endianness conversions by itself. However, in three places, a conversion is performed before it is handed over to usb_control_msg(), which leads to a double conversion (= no conversion): * snd_usb_nativeinstruments_boot_quirk() * snd_nativeinstruments_control_get() * snd_nativeinstruments_control_put() Caught by sparse: sound/usb/mixer_quirks.c:512:38: warning: incorrect type in argument 6 (different base types) sound/usb/mixer_quirks.c:512:38: expected unsigned short [unsigned] [usertype] index sound/usb/mixer_quirks.c:512:38: got restricted __le16 [usertype] <noident> sound/usb/mixer_quirks.c:543:35: warning: incorrect type in argument 5 (different base types) sound/usb/mixer_quirks.c:543:35: expected unsigned short [unsigned] [usertype] value sound/usb/mixer_quirks.c:543:35: got restricted __le16 [usertype] <noident> sound/usb/mixer_quirks.c:543:56: warning: incorrect type in argument 6 (different base types) sound/usb/mixer_quirks.c:543:56: expected unsigned short [unsigned] [usertype] index sound/usb/mixer_quirks.c:543:56: got restricted __le16 [usertype] <noident> sound/usb/quirks.c:502:35: warning: incorrect type in argument 5 (different base types) sound/usb/quirks.c:502:35: expected unsigned short [unsigned] [usertype] value sound/usb/quirks.c:502:35: got restricted __le16 [usertype] <noident> Signed-off-by:
Eldad Zack <eldad@fogrefinery.com> Acked-by:
Daniel Mack <zonque@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Li Fei authored
commit c10b90d8 upstream. Even in failed case of pm_runtime_get_sync, the usage_count is incremented. In order to keep the usage_count with correct value and runtime power management to behave correctly, call pm_runtime_put_noidle in such case. In __hwspin_lock_request, module_put is also called before return in pm_runtime_get_sync failed case. Signed-off-by Liu Chuansheng <chuansheng.liu@intel.com> Signed-off-by:
Li Fei <fei.li@intel.com> [edit commit log] Signed-off-by:
Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Youquan Song authored
commit b55f84e2 upstream. There is a quirk patch 5e5a4f5d "ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge chipsets(v2)" fixing the 4 ports IDE controller 32bit PIO mode. We've hit a problem with DVD not recognized on Haswell Desktop platform which includes Lynx Point 2-port SATA controller. This quirk patch disables 32bit PIO on this controller in IDE mode. v2: Change spelling error in statememnt pointed by Sergei Shtylyov. v3: Change comment statememnt and spliting line over 80 characters pointed by Libor Pechacek and also rebase the patch against 3.8-rc7 kernel. Tested-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
Youquan Song <youquan.song@intel.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Shan Hai authored
commit a32450e1 upstream. The Slimtype DVD A DS8A8SH drive locks up when max sector is smaller than 65535, and the blow backtrace is observed on locking up: INFO: task flush-8:32:1130 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. flush-8:32 D ffffffff8180cf60 0 1130 2 0x00000000 ffff880273aef618 0000000000000046 0000000000000005 ffff880273aee000 ffff880273aee000 ffff880273aeffd8 ffff880273aee010 ffff880273aee000 ffff880273aeffd8 ffff880273aee000 ffff88026e842ea0 ffff880274a10000 Call Trace: [<ffffffff8168fc2d>] schedule+0x5d/0x70 [<ffffffff8168fccc>] io_schedule+0x8c/0xd0 [<ffffffff81324461>] get_request+0x731/0x7d0 [<ffffffff8133dc60>] ? cfq_allow_merge+0x50/0x90 [<ffffffff81083aa0>] ? wake_up_bit+0x40/0x40 [<ffffffff81320443>] ? bio_attempt_back_merge+0x33/0x110 [<ffffffff813248ea>] blk_queue_bio+0x23a/0x3f0 [<ffffffff81322176>] generic_make_request+0xc6/0x120 [<ffffffff81322308>] submit_bio+0x138/0x160 [<ffffffff811d7596>] ? bio_alloc_bioset+0x96/0x120 [<ffffffff811d1f61>] submit_bh+0x1f1/0x220 [<ffffffff811d48b8>] __block_write_full_page+0x228/0x340 [<ffffffff811d3650>] ? attach_nobh_buffers+0xc0/0xc0 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10 [<ffffffff811d8960>] ? I_BDEV+0x10/0x10 [<ffffffff811d4ab6>] block_write_full_page_endio+0xe6/0x100 [<ffffffff811d4ae5>] block_write_full_page+0x15/0x20 [<ffffffff811d9268>] blkdev_writepage+0x18/0x20 [<ffffffff81142527>] __writepage+0x17/0x40 [<ffffffff811438ba>] write_cache_pages+0x34a/0x4a0 [<ffffffff81142510>] ? set_page_dirty+0x70/0x70 [<ffffffff81143a61>] generic_writepages+0x51/0x80 [<ffffffff81143ab0>] do_writepages+0x20/0x50 [<ffffffff811c9ed6>] __writeback_single_inode+0xa6/0x2b0 [<ffffffff811ca861>] writeback_sb_inodes+0x311/0x4d0 [<ffffffff811caaa6>] __writeback_inodes_wb+0x86/0xd0 [<ffffffff811cad43>] wb_writeback+0x1a3/0x330 [<ffffffff816916cf>] ? _raw_spin_lock_irqsave+0x3f/0x50 [<ffffffff811b8362>] ? get_nr_inodes+0x52/0x70 [<ffffffff811cb0ac>] wb_do_writeback+0x1dc/0x260 [<ffffffff8168dd34>] ? schedule_timeout+0x204/0x240 [<ffffffff811cb232>] bdi_writeback_thread+0x102/0x2b0 [<ffffffff811cb130>] ? wb_do_writeback+0x260/0x260 [<ffffffff81083550>] kthread+0xc0/0xd0 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0 [<ffffffff8169a3ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81083490>] ? kthread_worker_fn+0x1b0/0x1b0 The above trace was triggered by "dd if=/dev/zero of=/dev/sr0 bs=2048 count=32768" It was previously working by accident, since another bug introduced by 4dce8ba9 (libata: Use 'bool' return value for ata_id_XXX) caused all drives to use maxsect=65535. Signed-off-by:
Shan Hai <shan.hai@windriver.com> Signed-off-by:
-
Shan Hai authored
commit d8668fcb upstream. The function returns type of ATAPI drives so it should return integer value. The commit 4dce8ba9 (libata: Use 'bool' return value for ata_id_XXX) since v2.6.39 changed the type of return value from int to bool, the change would cause all of the ATAPI class drives to be treated as TYPE_TAPE and the max_sectors of the drives to be set to 65535 because of the commit f8d8e579(libata: increase 128 KB / cmd limit for ATAPI tape drives), for the function would return true for all ATAPI class drives and the TYPE_TAPE is defined as 0x01. Signed-off-by:
-
Tim Gardner authored
commit 83589b30 upstream. BugLink: http://bugs.launchpad.net/bugs/1128840 It appears that when this register read fails it never recovers, so I think there is no need to repeat the same error message ad infinitum. Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: users@rt2x00.serialmonkey.com Cc: netdev@vger.kernel.org Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Jussi Kivilinna authored
commit d3dde522 upstream. rfc4543(gcm(*)) code for GMAC assumes that assoc scatterlist always contains only one segment and only makes use of this first segment. However ipsec passes assoc with three segments when using 'extended sequence number' thus in this case rfc4543(gcm(*)) fails to function correctly. Patch fixes this issue. Reported-by:
Chaoxing Lin <Chaoxing.Lin@ultra-3eti.com> Tested-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Michael Bohan authored
commit 84cc8fd2 upstream. The current code makes the assumption that a cpu_base lock won't be held if the CPU corresponding to that cpu_base is offline, which isn't always true. If a hrtimer is not queued, then it will not be migrated by migrate_hrtimers() when a CPU is offlined. Therefore, the hrtimer's cpu_base may still point to a CPU which has subsequently gone offline if the timer wasn't enqueued at the time the CPU went down. Normally this wouldn't be a problem, but a cpu_base's lock is blindly reinitialized each time a CPU is brought up. If a CPU is brought online during the period that another thread is performing a hrtimer operation on a stale hrtimer, then the lock will be reinitialized under its feet, and a SPIN_BUG() like the following will be observed: <0>[ 28.082085] BUG: spinlock already unlocked on CPU#0, swapper/0/0 <0>[ 28.087078] lock: 0xc4780b40, value 0x0 .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1 <4>[ 42.451150] [<c0014398>] (unwind_backtrace+0x0/0x120) from [<c0269220>] (do_raw_spin_unlock+0x44/0xdc) <4>[ 42.460430] [<c0269220>] (do_raw_spin_unlock+0x44/0xdc) from [<c071b5bc>] (_raw_spin_unlock+0x8/0x30) <4>[ 42.469632] [<c071b5bc>] (_raw_spin_unlock+0x8/0x30) from [<c00a9ce0>] (__hrtimer_start_range_ns+0x1e4/0x4f8) <4>[ 42.479521] [<c00a9ce0>] (__hrtimer_start_range_ns+0x1e4/0x4f8) from [<c00aa014>] (hrtimer_start+0x20/0x28) <4>[ 42.489247] [<c00aa014>] (hrtimer_start+0x20/0x28) from [<c00e6190>] (rcu_idle_enter_common+0x1ac/0x320) <4>[ 42.498709] [<c00e6190>] (rcu_idle_enter_common+0x1ac/0x320) from [<c00e6440>] (rcu_idle_enter+0xa0/0xb8) <4>[ 42.508259] [<c00e6440>] (rcu_idle_enter+0xa0/0xb8) from [<c000f268>] (cpu_idle+0x24/0xf0) <4>[ 42.516503] [<c000f268>] (cpu_idle+0x24/0xf0) from [<c06ed3c0>] (rest_init+0x88/0xa0) <4>[ 42.524319] [<c06ed3c0>] (rest_init+0x88/0xa0) from [<c0c00978>] (start_kernel+0x3d0/0x434) As an example, this particular crash occurred when hrtimer_start() was executed on CPU #0. The code locked the hrtimer's current cpu_base corresponding to CPU #1. CPU #0 then tried to switch the hrtimer's cpu_base to an optimal CPU which was online. In this case, it selected the cpu_base corresponding to CPU #3. Before it could proceed, CPU #1 came online and reinitialized the spinlock corresponding to its cpu_base. Thus now CPU #0 held a lock which was reinitialized. When CPU #0 finally ended up unlocking the old cpu_base corresponding to CPU #1 so that it could switch to CPU #3, we hit this SPIN_BUG() above while in switch_hrtimer_base(). CPU #0 CPU #1 ---- ---- ... <offline> hrtimer_start() lock_hrtimer_base(base #1) ... init_hrtimers_cpu() switch_hrtimer_base() ... ... raw_spin_lock_init(&cpu_base->lock) raw_spin_unlock(&cpu_base->lock) ... <spin_bug> Solve this by statically initializing the lock. Signed-off-by:
Michael Bohan <mbohan@codeaurora.org> Link: http://lkml.kernel.org/r/1363745965-23475-1-git-send-email-mbohan@codeaurora.orgSigned-off-by:
-
Johan Hovold authored
commit fc98ab87 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Johan Hovold authored
commit 43a66b4c upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit dbcea761 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 40509ca9 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 8edfdab3 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit a14430db upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit e670c6af upstream. Make sure waiting processes are woken on modem-status changes. Currently processes are only woken on termios changes regardless of whether the modem status has changed. Signed-off-by:
-
Johan Hovold authored
commit cf1d2444 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 7b245969 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 33357625 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 71ccb9b0 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. When switching to tty ports, some lifetime assumptions were changed. Specifically, close can now be called before the final tty reference is dropped as part of hangup at device disconnect. Even with the ftdi private-data refcounting this means that the port private data can be freed while a process is sleeping on modem-status changes and thus cannot be relied on to detect disconnects when woken up. Signed-off-by:
-
Johan Hovold authored
commit 356050d8 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Also remove bogus test for private data pointer being NULL as it is never assigned in the loop. Signed-off-by:
-
Johan Hovold authored
commit fa1e11d5 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Johan Hovold authored
commit 50188603 upstream. Use the port wait queue and make sure to check the serial disconnected flag before accessing private port data after waking up. This is is needed as the private port data (including the wait queue itself) can be gone when waking up after a disconnect. Signed-off-by:
-
Ming Lei authored
commit eba0e3c3 upstream. Johan's 'fix use-after-free in TIOCMIWAIT' patchset[1] introduces one bug which can cause kernel hang when opening port. This patch initialized the 'port->delta_msr_wait' waitqueue head to fix the bug which is introduced in 3.9-rc4. [1], http://marc.info/?l=linux-usb&m=136368139627876&w=2Signed-off-by:
Ming Lei <tom.leiming@gmail.com> Acked-by:
-
Johan Hovold authored
commit e5b33dc9 upstream. Add modem-status-change wait queue to struct usb_serial_port that subdrivers can use to implement TIOCMIWAIT. Currently subdrivers use a private wait queue which may have been released when waking up after device disconnected. Note that we're adding a new wait queue rather than reusing the tty-port one as we do not want to get woken up at hangup (yet). Signed-off-by:
-
- 10 Apr, 2013 5 commits
-
-
Ben Hutchings authored
-
Jiri Slaby authored
commit 6b90466c upstream. In patch "HID: microsoft: fix invalid rdesc for 3k kbd" I fixed support for MS 3k keyboards. However the added check using memcmp and a compound statement breaks build on architectures where memcmp is a macro with parameters. hid-microsoft.c:51:18: error: macro "memcmp" passed 6 arguments, but takes just 3 On x86_64, memcmp is a function, so I did not see the error. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Veaceslav Falico authored
commit fcd99434 upstream. Now that netdev_rx_handler_unregister contains synchronize_net(), we need to call it outside of bond->lock, cause it might sleep. Also, remove the already unneded synchronize_net(). Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Steve Glendinning authored
[ Upstream commit 4c51e536 ] This patch enables RX of jumbo frames for LAN7500. Previously the driver would transmit jumbo frames succesfully but would drop received jumbo frames (incrementing the interface errors count). With this patch applied the device can succesfully receive jumbo frames up to MTU 9000 (9014 bytes on the wire including ethernet header). Signed-off-by:
Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by:
-
Veaceslav Falico authored
[ Upstream commit 76a0e681 ] skb->ip_summed should be CHECKSUM_UNNECESSARY when the driver reports that checksums were correct and CHECKSUM_NONE in any other case. They're currently placed vice versa, which breaks the forwarding scenario. Fix it by placing them as described above. Signed-off-by:
-
