- 17 Feb, 2011 40 commits
-
-
Felix Fietkau authored
commit eb3e554b upstream. Some drivers (e.g. ath9k) do not always disable beacons when they're supposed to. When an interface is changed using the change_interface op, the mode specific sdata part is in an undefined state and trying to get a beacon at this point can produce weird crashes. To fix this, add a check for ieee80211_sdata_running before using anything from the sdata. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Luciano Coelho authored
commit 82694f76 upstream. When the buffer size is set to zero in the block ack parameter set field, we should use the maximum supported number of subframes. The existing code was bogus and was doing some unnecessary calculations that lead to wrong values. Thanks Johannes for helping me figure this one out. Cc: Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Luciano Coelho <coelho@ti.com> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Johannes Berg authored
commit d2460f4b upstream. commit ad0e2b5a Author: Johannes Berg <johannes.berg@intel.com> Date: Tue Jun 1 10:19:19 2010 +0200 mac80211: simplify key locking removed the synchronization against RCU and thus opened a race window where we can use a key for TX while it is already freed. Put a synchronisation into the right place to close that window. Reported-by:
Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Milton Miller authored
commit 919bbad5 upstream. Commit b51aff05 said: Under memory pressure, the mac80211 mesh code may helpfully print a message that it failed to clone a mesh frame and then will proceed to crash trying to use it anyway. Fix that. Avoid the reference whenever the frame copy is unsuccessful regardless of the debug message being suppressed or printed. Signed-off-by:
Milton Miller <miltonm@bga.com> Signed-off-by:
-
Arend van Spriel authored
commit 4032ec63 upstream. PCI PM suspend callback took down the interface and resume brought it back up. In the mac80211 context this is done in subsequent calls. Rework implementation so that suspend only stores config, and sets PCI power state. The resume return to full power state (D0), restores the config, and brings hardware back up. Full bringup is done by subsequent mac80211 calls. Reviewed-by:
Brett Rudley <brudley@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
roel kluin authored
commit e7bf352f upstream. Fix test: the branch is always taken. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Denis Kirjanov authored
commit 9c330084 upstream. The TX queues are allocated inside register_netdev. It doesn't make any sense to stop the queue before allocation. Signed-off-by:
Denis Kirjanov <dkirjanov@kernel.org> Signed-off-by:
-
Chien-Chia Chen authored
commit 1f061315 upstream. Somehow Greg messed up the last patch and missed a chunk. This patch contains the missing chunk. Acked-by:
Chun-Yi Lee <jlee@novell.com> Signed-off-by:
Chien-Chia Chen <machen@novell.com> Signed-off-by:
-
Chien-Chia Chen authored
commit 1226056d upstream. Fix RT3090 scan AP function. This patch fixes the rt3090 wireless module failed to scan AP around due to Windows driver causing rt3090 module unable to scan AP in Linux. Acked-by:
-
Haiyang Zhang authored
commit 7c161d0b upstream. The hv_netvsc gets RNDIS_STATUS_MEDIA_CONNECT event after the VM is live migrated. Adding call to netif_notify_peers() for this event to send GARP (Gratuitous ARP) to notify network peers. Otherwise, the VM's network connection may stop after a live migration. This patch should also be applied to stable kernel 2.6.32 and later. Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
-
Hank Janssen authored
commit a786f915 upstream. Removed the call to netif_stop_queue() in netvsc_probe() as the queue is not initialized at that point and further call to it after queue initialization is really not necessary. This change was prompted after an upstream change went into 2.6.37 (netif_tx_stop_queue) that now checks if netif_stop_queue is called before register with netdev is done. This will eliminate the warning message to the log when hv_netvsc driver starts up. Signed-off-by:
Abhishek Kane <v-abkane@microsoft.com> Signed-off-by:
-
Timo Teräs authored
commit d70c6731 upstream. The channel callbacks are called directly from vmbus_event_dpc which runs in tasklet context. These callbacks need to use GFP_ATOMIC. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16701 Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Timo Teräs <timo.teras@iki.fi> Signed-off-by:
-
Ky Srinivasan authored
commit 268eff90 upstream. The block device does not create the proper symlink in sysfs because we forgot to set up the gendisk structure properly. This patch fixes the issue. Signed-off-by:
K. Y. Srinivasan <ksrinivasan@novell.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Ian Abbott authored
commit d1ce3184 upstream. The ni_labpc driver module only requests a shared IRQ for PCI devices, requesting a non-shared IRQ for non-PCI devices. As this module is also used by the ni_labpc_cs module for certain National Instruments PCMCIA cards, it also needs to request a shared IRQ for PCMCIA devices, otherwise you get a IRQ mismatch with the CardBus controller. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ruben Smits authored
commit 6292817d upstream. add DEVICE_ID to table Signed-off-by:
Ruben Smits <ruben.smits@mech.kuleuven.be> Signed-off-by:
-
Axel Köllhofer authored
commit 6b284053 upstream. This patch adds several new device ids to the r8712u staging driver. The new ids were retrieved from latest vendor driver (v2.6.6.0.20101111) downloadable from www.realtek.com.tw Signed-off-by:
Axel Koellhofer <AxelKoellhofer@web.de> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Nitin Gupta authored
commit 5414e557 upstream. In zram_read() and zram_write() we were not incrementing the index number and thus were reading/writing values from/to incorrect sectors on zram disk, resulting in data corruption. Signed-off-by:
Nitin Gupta <ngupta@vflare.org> Signed-off-by:
-
Alan Stern authored
commit bf3d7d40 upstream. The USB core keeps track of pending resume requests for root hubs, in order to resolve races between wakeup requests and suspends. However the code that does this is subject to another race (between wakeup requests and resumes) because the WAKEUP_PENDING flag is cleared before the resume occurs, leaving a window in which another wakeup request might arrive. This patch (as1447) fixes the problem by clearing the WAKEUP_PENDING flag after the resume instead of before it. This fixes Bugzilla #24952. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
Paul Bender <pebender@san.rr.com> Tested-by:
warpme <warpme@o2.pl> Signed-off-by:
-
Alan Stern authored
commit d199c96d upstream. If anyone comes across a high-speed hub that (by mistake or by design) claims to have no Transaction Translators, plugging a full- or low-speed device into it will cause the USB stack to crash. This patch (as1446) prevents the problem by ignoring such devices, since the kernel has no way to communicate with them. Signed-off-by:
Perry Neben <neben@vmware.com> Signed-off-by:
-
Yin Kangkai authored
commit 148fc55f upstream. There is a msleep with spin lock held during ehci pci suspend, which will cause kernel BUG: scheduling while atomic. Fix that. [ 184.139620] BUG: scheduling while atomic: kworker/u:11/416/0x00000002 [ 184.139632] 4 locks held by kworker/u:11/416: [ 184.139640] #0: (events_unbound){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb [ 184.139669] #1: ((&entry->work)){+.+.+.}, at: [<c104ddd4>] process_one_work+0x1b3/0x4cb [ 184.139686] #2: (&__lockdep_no_validate__){+.+.+.}, at: [<c127cde3>] __device_suspend+0x2c/0x154 [ 184.139706] #3: (&(&ehci->lock)->rlock){-.-...}, at: [<c132f3d8>] ehci_pci_suspend+0x35/0x7b [ 184.139725] Modules linked in: serio_raw pegasus joydev mrst_gfx(C) battery [ 184.139748] irq event stamp: 52 [ 184.139753] hardirqs last enabled at (51): [<c14fdaac>] mutex_lock_nested+0x258/0x293 [ 184.139766] hardirqs last disabled at (52): [<c14fe7b4>] _raw_spin_lock_irqsave+0xf/0x3e [ 184.139777] softirqs last enabled at (0): [<c10371c1>] copy_process+0x3d2/0x109d [ 184.139789] softirqs last disabled at (0): [< (null)>] (null) [ 184.139802] Pid: 416, comm: kworker/u:11 Tainted: G C 2.6.37-6.3-adaptation-oaktrail #37 [ 184.139809] Call Trace: [ 184.139820] [<c102eeff>] __schedule_bug+0x5e/0x65 [ 184.139829] [<c14fbca5>] schedule+0xac/0xc4c [ 184.139840] [<c11d4845>] ? string+0x37/0x8b [ 184.139853] [<c1044f21>] ? lock_timer_base+0x1f/0x3e [ 184.139863] [<c14fe7da>] ? _raw_spin_lock_irqsave+0x35/0x3e [ 184.139876] [<c1061590>] ? trace_hardirqs_off+0xb/0xd [ 184.139885] [<c14fccdc>] schedule_timeout+0x283/0x2d9 [ 184.139896] [<c104516f>] ? process_timeout+0x0/0xa [ 184.139906] [<c14fcd47>] schedule_timeout_uninterruptible+0x15/0x17 [ 184.139916] [<c104566a>] msleep+0x10/0x16 [ 184.139926] [<c132f316>] ehci_adjust_port_wakeup_flags+0x69/0xf6 [ 184.139937] [<c132f3eb>] ehci_pci_suspend+0x48/0x7b [ 184.139946] [<c1326587>] suspend_common+0x52/0xbb [ 184.139956] [<c1326625>] hcd_pci_suspend+0x26/0x28 [ 184.139967] [<c11e7182>] pci_pm_suspend+0x5f/0xd0 [ 184.139976] [<c127ca3a>] pm_op+0x5d/0xf0 [ 184.139986] [<c127ceac>] __device_suspend+0xf5/0x154 [ 184.139996] [<c127d2c8>] async_suspend+0x16/0x3a [ 184.140006] [<c1058f54>] async_run_entry_fn+0x89/0x111 [ 184.140016] [<c104deb6>] process_one_work+0x295/0x4cb [ 184.140026] [<c1058ecb>] ? async_run_entry_fn+0x0/0x111 [ 184.140036] [<c104e3d0>] worker_thread+0x17f/0x298 [ 184.140045] [<c104e251>] ? worker_thread+0x0/0x298 [ 184.140055] [<c105277f>] kthread+0x64/0x69 [ 184.140064] [<c105271b>] ? kthread+0x0/0x69 [ 184.140075] [<c1002efa>] kernel_thread_helper+0x6/0x1a Signed-off-by:
Yin Kangkai <kangkai.yin@intel.com> Acked-by:
-
Michael Williamson authored
commit 28fe2eb0 upstream. Add the USB Vendor ID and Product ID for a Acton Research Corp. spectrograph device with a FTDI chip for serial I/O. Signed-off-by:
Michael H Williamson <michael.h.williamson@gmail.com> Signed-off-by:
-
Arvid Ephraim Picciani authored
commit 721d92fc upstream. This adds the N8 to the list of devices in cdc-acm, in order to get the secondary ACM device exposed. In the spirit of: http://kerneltrap.org/mailarchive/linux-usb/2010/9/4/6264554Signed-off-by:
Arvid Ephraim Picciani <arvid.picciani@nokia.com> Signed-off-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
commit 6ec2f46c upstream. on ST Micro Connect Lite we have 4 port Part A and B for the JTAG Port C Uart Port D for PIO Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by:
-
Nick Holloway authored
commit c25f6b15 upstream. This device suffers from the off-by-one error when reporting the capacity, so add entry with US_FL_FIX_CAPACITY. Signed-off-by:
Nick Holloway <Nick.Holloway@pyrites.org.uk> Signed-off-by:
-
Ionut Nicu authored
commit b14de385 upstream. If usb_deregister() is called after usb_serial_deregister() when the device is plugged in, the following Oops occurs: [ 95.337377] BUG: unable to handle kernel NULL pointer dereference at 00000010 [ 95.338236] IP: [<c0776b2d>] klist_put+0x12/0x62 [ 95.338356] *pdpt = 000000003001a001 *pde = 0000000000000000 [ 95.338356] Oops: 0000 [#1] SMP [ 95.340499] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.2/usb8/idVendor [ 95.340499] Modules linked in: ti_usb_3410_5052(-) usbserial cpufreq_ondemand acpi_cpufreq mperf iptable_nat nf_nat iptable_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables ipv6 uinput arc4 ecb iwlagn iwlcore mac80211 cfg80211 microcode pcspkr acer_wmi joydev wmi sky2 [last unloaded: scsi_wait_scan] [ 95.341908] [ 95.341908] Pid: 1532, comm: modprobe Not tainted 2.6.37-rc7+ #6 Eiger /Aspire 5930 [ 95.341908] EIP: 0060:[<c0776b2d>] EFLAGS: 00010246 CPU: 0 [ 95.341908] EIP is at klist_put+0x12/0x62 [ 95.341908] EAX: 00000000 EBX: eedc0c84 ECX: c09c21b4 EDX: 00000001 [ 95.341908] ESI: 00000000 EDI: efaa0c1c EBP: f214fe2c ESP: f214fe1c [ 95.341908] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 95.341908] Process modprobe (pid: 1532, ti=f214e000 task=efaaf080 task.ti=f214e000) [ 95.341908] Stack: [ 95.341908] f214fe24 eedc0c84 efaaf080 efaa0c1c f214fe34 c0776ba8 f214fe5c c0776c76 [ 95.341908] c09c21b4 c09c21b4 eedc0c84 efaaf080 00000000 c0634398 eafe2d1c f7b515f0 [ 95.341908] f214fe6c c0631b5c eafe2d50 eafe2d1c f214fe7c c0631ba2 eafe2d1c eafe2c00 [ 95.341908] Call Trace: [ 95.341908] [<c0776ba8>] ? klist_del+0xd/0xf [ 95.341908] [<c0776c76>] ? klist_remove+0x48/0x74 [ 95.341908] [<c0634398>] ? devres_release_all+0x49/0x51 [ 95.341908] [<c0631b5c>] ? __device_release_driver+0x7b/0xa4 [ 95.341908] [<c0631ba2>] ? device_release_driver+0x1d/0x28 [ 95.341908] [<c06317c4>] ? bus_remove_device+0x92/0xa1 [ 95.341908] [<c062f3d8>] ? device_del+0xf9/0x13e [ 95.341908] [<f7b06146>] ? usb_serial_disconnect+0xd9/0x116 [usbserial] [ 95.341908] [<c0681e3f>] ? usb_disable_interface+0x32/0x40 [ 95.341908] [<c0683972>] ? usb_unbind_interface+0x48/0xfd [ 95.341908] [<c0631b43>] ? __device_release_driver+0x62/0xa4 [ 95.341908] [<c06320b9>] ? driver_detach+0x62/0x81 [ 95.341908] [<c0631a41>] ? bus_remove_driver+0x8f/0xae [ 95.341908] [<c063214c>] ? driver_unregister+0x50/0x57 [ 95.341908] [<c0682f95>] ? usb_deregister+0x77/0x84 [ 95.341908] [<f7b505b6>] ? ti_exit+0x26/0x28 [ti_usb_3410_5052] [ 95.341908] [<c046a307>] ? sys_delete_module+0x181/0x1de [ 95.341908] [<c04e2727>] ? path_put+0x1a/0x1d [ 95.341908] [<c047f4c5>] ? audit_syscall_entry+0x116/0x138 [ 95.341908] [<c04094df>] ? sysenter_do_call+0x12/0x28 [ 95.341908] Code: 00 83 7d f0 00 74 09 85 f6 74 05 89 f0 ff 55 f0 8b 43 04 5a 5b 5e 5f 5d c3 55 89 e5 57 56 53 89 c3 83 ec 04 8b 30 83 e6 fe 89 f0 <8b> 7e 10 88 55 f0 e8 47 26 01 00 8a 55 f0 84 d2 74 17 f6 03 01 [ 95.341908] EIP: [<c0776b2d>] klist_put+0x12/0x62 SS:ESP 0068:f214fe1c [ 95.341908] CR2: 0000000000000010 [ 95.342357] ---[ end trace 8124d00ad871ad18 ]--- Signed-off-by:
Ionut Nicu <ionut.nicu@mindbit.ro> Signed-off-by:
-
Bjørn Mork authored
commit 271c1150 upstream. The major and minor number saved in the product_info structure were copied from the address instead of the data, causing an inconsistency in the reported versions during firmware loading: usb 4-1: firmware: requesting edgeport/down.fw /usr/src/linux/drivers/usb/serial/io_edgeport.c: downloading firmware version (930) 1.16.4 [..] /usr/src/linux/drivers/usb/serial/io_edgeport.c: edge_startup - time 3 4328191260 /usr/src/linux/drivers/usb/serial/io_edgeport.c: FirmwareMajorVersion 0.0.4 This can cause some confusion whether firmware loaded successfully or not. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Alan Stern authored
commit ad84e4a9 upstream. This patch (as1442) fixes a bug in g_printer: Module parameters should not be marked "__initdata" if they are accessible in sysfs (i.e., if the mode value in the module_param() macro is nonzero). Otherwise attempts to access the parameters will cause addressing violations. Character-string module parameters must not be marked "__initdata" if the module can be unloaded, because the kernel needs to access the parameter variable at unload time in order to free the dynamically-allocated string. Signed-off-by:
-
Alan Stern authored
commit d5aa4751 upstream. This patch (as1441) fixes a bug in g_printer. The gadget driver, char device number, and class device should be unregistered in reverse order of registration. As it is now, when the module is unloaded the class device gets unregistered first, causing a crash when the unbind method tries to access it. This fixes Bugzilla #25882. Signed-off-by:
-
Alan Stern authored
commit f75593ce upstream. This patch (as1440) fixes a bug in ehci-hcd. ehci->periodic_size is used to compute the size in a dma_alloc_coherent() call, but then it gets changed later on. As a result, the corresponding call to dma_free_coherent() passes a different size from the original allocation. Fix the problem by adjusting ehci->periodic_size before carrying out any of the memory allocations. Signed-off-by:
-
Alex He authored
commit baab93af upstream. AMD Hudson also needs the same ASPM quirk as SB800 Signed-off-by:
Alex He <alex.he@amd.com> Signed-off-by:
-
Alan Stern authored
commit 5620b5f7 upstream. This patch (as1443) fixes a bug found in many of the USB serial drivers: They don't set the .usb_driver field in their usb_serial_driver structure. This field is needed for assigning dynamic IDs for device matching. In addition, starting with the 2.6.37 kernel, the .usb_driver field is needed for proper autosuspend operation. Without it, attempts to open the device file will fail. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Nicolaus Colberg authored
commit aa52b3a9 upstream. /drivers/usb/serial/option.c: Adding support for Cinterion's HC25, HC28, HC28J, EU3-E, EU3-P and PH8 by correcting/adding Cinterion's and Siemens' Vendor IDs as well as Product IDs and USB_DEVICE tuples Signed-off-by:
Nicolaus Colberg <nicolaus.colberg@cinterion.com> Signed-off-by:
-
Pieter Maes authored
commit a9d61bc4 upstream. I found the original patch on the db0fhn repeater wiki (couldn't find the email of the origial author) I guess it was never commited. I updated and added some Icom HAM-radio devices to the ftdi driver. Added extra comments to make clear what devices it are. Signed-off-by:
Pieter Maes <maescool@gmail.com> Signed-off-by:
-
Alan Stern authored
commit 3ea3c9b5 upstream. This patch (as1444) adds an unusual_devs entry for an MP3 player from Coby electronics. The device has two nasty bugs. Signed-off-by:
Jasper Mackenzie <scarletpimpernal@hotmail.com> Signed-off-by:
-
Alan Stern authored
commit 12f68c48 upstream. This patch (as1438) adds an unusual_devs entry for the MagicPixel FW_Omega2 chip, used in the CamSport Evo camera. The firmware incorrectly reports a vendor-specific bDeviceClass. Signed-off-by:
-
Richard Schütz authored
USB: usb-storage: unusual_devs update for TrekStor DataStation maxi g.u external hard drive enclosure commit 7e1e7bd9 upstream. The TrekStor DataStation maxi g.u external hard drive enclosure uses a JMicron USB to SATA chip which needs the US_FL_IGNORE_RESIDUE flag to work properly. Signed-off-by:
Richard Schütz <r.schtz@t-online.de> Signed-off-by:
-
Richard Schütz authored
commit cae41118 upstream. New device ID added for unusual Cypress ATACB device. Signed-off-by:
-
Dan Williams authored
commit a58861fb upstream. Another CDC-ACM + vendor specific interface layout for the QCDM port. Signed-off-by:
-
Craig Shelley authored
commit 9926c0df upstream. Device ID removed 0x10C4/0x8149 for West Mountain Radio Computerized Battery Analyzer. This device is actually based on a SiLabs C8051Fxxx, see http://www.etheus.net/SiUSBXp_Linux_Driver for further info. Signed-off-by:
Craig Shelley <craig@microtron.org.uk> Signed-off-by:
-
Craig Shelley authored
commit faea63f7 upstream. Device Ids added for IRZ Automation Teleport SG-10 GSM/GPRS Modem and DekTec DTA Plus VHF/UHF Booster/Attenuator. Signed-off-by:
-
