Add a reject module for NFPROTO_INET. It does nothing but dispatch
to the AF-specific modules based on the hook family.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Currently the nft_reject module depends on symbols from ipv6. This is
wrong since no generic module should force IPv6 support to be loaded.
Split up the module into AF-specific and a generic part.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

For the reject module, we need to add AF-specific implementations to
get rid of incorrect module dependencies. Try to load an AF-specific
module first and fall back to generic modules.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The key was missing in the list of valid keys, add it.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Commit c9c8e485 (netfilter: nf_tables: dump sets in all existing families)
changed nft_ctx_init_from_setattr() to only look up the address family if it
is not NFPROTO_UNSPEC. However if it is NFPROTO_UNSPEC and a table attribute
is given, nftables_afinfo_lookup() will dereference the NULL afi pointer.

Fix by checking for non-NULL afi and also move a check added by that commit
to the proper position.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The map that is used to allocate anonymous sets is indeed
BITS_PER_BYTE * PAGE_SIZE long.
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

With this patch, the conntrack refcount is initially set to zero and
it is bumped once it is added to any of the list, so we fulfill
Eric's golden rule which is that all released objects always have a
refcount that equals zero.

Andrey Vagin reports that nf_conntrack_free can't be called for a
conntrack with non-zero ref-counter, because it can race with
nf_conntrack_find_get().

A conntrack slab is created with SLAB_DESTROY_BY_RCU. Non-zero
ref-counter says that this conntrack is used. So when we release
a conntrack with non-zero counter, we break this assumption.

CPU1                                    CPU2
____nf_conntrack_find()
                                        nf_ct_put()
                                         destroy_conntrack()
                                        ...
                                        init_conntrack
                                         __nf_conntrack_alloc (set use = 1)
atomic_inc_not_zero(&ct->use) (use = 2)
                                         if (!l4proto->new(ct, skb, dataoff, timeouts))
                                          nf_conntrack_free(ct); (use = 2 !!!)
                                        ...
                                        __nf_conntrack_alloc (set use = 1)
 if (!nf_ct_key_equal(h, tuple, zone))
  nf_ct_put(ct); (use = 0)
   destroy_conntrack()
                                        /* continue to work with CT */

After applying the path "[PATCH] netfilter: nf_conntrack: fix RCU
race in nf_conntrack_find_get" another bug was triggered in
destroy_conntrack():

<4>[67096.759334] ------------[ cut here ]------------
<2>[67096.759353] kernel BUG at net/netfilter/nf_conntrack_core.c:211!
...
<4>[67096.759837] Pid: 498649, comm: atdd veid: 666 Tainted: G         C ---------------    2.6.32-042stab084.18 #1 042stab084_18 /DQ45CB
<4>[67096.759932] RIP: 0010:[<ffffffffa03d99ac>]  [<ffffffffa03d99ac>] destroy_conntrack+0x15c/0x190 [nf_conntrack]
<4>[67096.760255] Call Trace:
<4>[67096.760255]  [<ffffffff814844a7>] nf_conntrack_destroy+0x17/0x30
<4>[67096.760255]  [<ffffffffa03d9bb5>] nf_conntrack_find_get+0x85/0x130 [nf_conntrack]
<4>[67096.760255]  [<ffffffffa03d9fb2>] nf_conntrack_in+0x352/0xb60 [nf_conntrack]
<4>[67096.760255]  [<ffffffffa048c771>] ipv4_conntrack_local+0x51/0x60 [nf_conntrack_ipv4]
<4>[67096.760255]  [<ffffffff81484419>] nf_iterate+0x69/0xb0
<4>[67096.760255]  [<ffffffff814b5b00>] ? dst_output+0x0/0x20
<4>[67096.760255]  [<ffffffff814845d4>] nf_hook_slow+0x74/0x110
<4>[67096.760255]  [<ffffffff814b5b00>] ? dst_output+0x0/0x20
<4>[67096.760255]  [<ffffffff814b66d5>] raw_sendmsg+0x775/0x910
<4>[67096.760255]  [<ffffffff8104c5a8>] ? flush_tlb_others_ipi+0x128/0x130
<4>[67096.760255]  [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255]  [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255]  [<ffffffff814c136a>] inet_sendmsg+0x4a/0xb0
<4>[67096.760255]  [<ffffffff81444e93>] ? sock_sendmsg+0x13/0x140
<4>[67096.760255]  [<ffffffff81444f97>] sock_sendmsg+0x117/0x140
<4>[67096.760255]  [<ffffffff8102e299>] ? native_smp_send_reschedule+0x49/0x60
<4>[67096.760255]  [<ffffffff81519beb>] ? _spin_unlock_bh+0x1b/0x20
<4>[67096.760255]  [<ffffffff8109d930>] ? autoremove_wake_function+0x0/0x40
<4>[67096.760255]  [<ffffffff814960f0>] ? do_ip_setsockopt+0x90/0xd80
<4>[67096.760255]  [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255]  [<ffffffff8100bc4e>] ? apic_timer_interrupt+0xe/0x20
<4>[67096.760255]  [<ffffffff814457c9>] sys_sendto+0x139/0x190
<4>[67096.760255]  [<ffffffff810efa77>] ? audit_syscall_entry+0x1d7/0x200
<4>[67096.760255]  [<ffffffff810ef7c5>] ? __audit_syscall_exit+0x265/0x290
<4>[67096.760255]  [<ffffffff81474daf>] compat_sys_socketcall+0x13f/0x210
<4>[67096.760255]  [<ffffffff8104dea3>] ia32_sysret+0x0/0x5

I have reused the original title for the RFC patch that Andrey posted and
most of the original patch description.

Cc: Eric Dumazet <edumazet@google.com>
Cc: Andrew Vagin <avagin@parallels.com>
Cc: Florian Westphal <fw@strlen.de>
Reported-by: Andrew Vagin <avagin@parallels.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Andrew Vagin <avagin@parallels.com>

Similar bug fixed in SIP module in 3f509c68 ("netfilter: nf_nat_sip: fix
incorrect handling of EBUSY for RTCP expectation").

BUG: unable to handle kernel paging request at 00100104
IP: [<f8214f07>] nf_ct_unlink_expect_report+0x57/0xf0 [nf_conntrack]
...
Call Trace:
  [<c0244bd8>] ? del_timer+0x48/0x70
  [<f8215687>] nf_ct_remove_expectations+0x47/0x60 [nf_conntrack]
  [<f8211c99>] nf_ct_delete_from_lists+0x59/0x90 [nf_conntrack]
  [<f8212e5e>] death_by_timeout+0x14e/0x1c0 [nf_conntrack]
  [<f8212d10>] ? nf_conntrack_set_hashsize+0x190/0x190 [nf_conntrack]
  [<c024442d>] call_timer_fn+0x1d/0x80
  [<c024461e>] run_timer_softirq+0x18e/0x1a0
  [<f8212d10>] ? nf_conntrack_set_hashsize+0x190/0x190 [nf_conntrack]
  [<c023e6f3>] __do_softirq+0xa3/0x170
  [<c023e650>] ? __local_bh_enable+0x70/0x70
  <IRQ>
  [<c023e587>] ? irq_exit+0x67/0xa0
  [<c0202af6>] ? do_IRQ+0x46/0xb0
  [<c027ad05>] ? clockevents_notify+0x35/0x110
  [<c066ac6c>] ? common_interrupt+0x2c/0x40
  [<c056e3c1>] ? cpuidle_enter_state+0x41/0xf0
  [<c056e6fb>] ? cpuidle_idle_call+0x8b/0x100
  [<c02085f8>] ? arch_cpu_idle+0x8/0x30
  [<c027314b>] ? cpu_idle_loop+0x4b/0x140
  [<c0273258>] ? cpu_startup_entry+0x18/0x20
  [<c066056d>] ? rest_init+0x5d/0x70
  [<c0813ac8>] ? start_kernel+0x2ec/0x2f2
  [<c081364f>] ? repair_env_string+0x5b/0x5b
  [<c0813269>] ? i386_start_kernel+0x33/0x35
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Lets look at destroy_conntrack:

hlist_nulls_del_rcu(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnnode);
...
nf_conntrack_free(ct)
	kmem_cache_free(net->ct.nf_conntrack_cachep, ct);

net->ct.nf_conntrack_cachep is created with SLAB_DESTROY_BY_RCU.

The hash is protected by rcu, so readers look up conntracks without
locks.
A conntrack is removed from the hash, but in this moment a few readers
still can use the conntrack. Then this conntrack is released and another
thread creates conntrack with the same address and the equal tuple.
After this a reader starts to validate the conntrack:
* It's not dying, because a new conntrack was created
* nf_ct_tuple_equal() returns true.

But this conntrack is not initialized yet, so it can not be used by two
threads concurrently. In this case BUG_ON may be triggered from
nf_nat_setup_info().

Florian Westphal suggested to check the confirm bit too. I think it's
right.

task 1			task 2			task 3
			nf_conntrack_find_get
			 ____nf_conntrack_find
destroy_conntrack
 hlist_nulls_del_rcu
 nf_conntrack_free
 kmem_cache_free
						__nf_conntrack_alloc
						 kmem_cache_alloc
						 memset(&ct->tuplehash[IP_CT_DIR_MAX],
			 if (nf_ct_is_dying(ct))
			 if (!nf_ct_tuple_equal()

I'm not sure, that I have ever seen this race condition in a real life.
Currently we are investigating a bug, which is reproduced on a few nodes.
In our case one conntrack is initialized from a few tasks concurrently,
we don't have any other explanation for this.

<2>[46267.083061] kernel BUG at net/ipv4/netfilter/nf_nat_core.c:322!
...
<4>[46267.083951] RIP: 0010:[<ffffffffa01e00a4>]  [<ffffffffa01e00a4>] nf_nat_setup_info+0x564/0x590 [nf_nat]
...
<4>[46267.085549] Call Trace:
<4>[46267.085622]  [<ffffffffa023421b>] alloc_null_binding+0x5b/0xa0 [iptable_nat]
<4>[46267.085697]  [<ffffffffa02342bc>] nf_nat_rule_find+0x5c/0x80 [iptable_nat]
<4>[46267.085770]  [<ffffffffa0234521>] nf_nat_fn+0x111/0x260 [iptable_nat]
<4>[46267.085843]  [<ffffffffa0234798>] nf_nat_out+0x48/0xd0 [iptable_nat]
<4>[46267.085919]  [<ffffffff814841b9>] nf_iterate+0x69/0xb0
<4>[46267.085991]  [<ffffffff81494e70>] ? ip_finish_output+0x0/0x2f0
<4>[46267.086063]  [<ffffffff81484374>] nf_hook_slow+0x74/0x110
<4>[46267.086133]  [<ffffffff81494e70>] ? ip_finish_output+0x0/0x2f0
<4>[46267.086207]  [<ffffffff814b5890>] ? dst_output+0x0/0x20
<4>[46267.086277]  [<ffffffff81495204>] ip_output+0xa4/0xc0
<4>[46267.086346]  [<ffffffff814b65a4>] raw_sendmsg+0x8b4/0x910
<4>[46267.086419]  [<ffffffff814c10fa>] inet_sendmsg+0x4a/0xb0
<4>[46267.086491]  [<ffffffff814459aa>] ? sock_update_classid+0x3a/0x50
<4>[46267.086562]  [<ffffffff81444d67>] sock_sendmsg+0x117/0x140
<4>[46267.086638]  [<ffffffff8151997b>] ? _spin_unlock_bh+0x1b/0x20
<4>[46267.086712]  [<ffffffff8109d370>] ? autoremove_wake_function+0x0/0x40
<4>[46267.086785]  [<ffffffff81495e80>] ? do_ip_setsockopt+0x90/0xd80
<4>[46267.086858]  [<ffffffff8100be0e>] ? call_function_interrupt+0xe/0x20
<4>[46267.086936]  [<ffffffff8118cb10>] ? ub_slab_ptr+0x20/0x90
<4>[46267.087006]  [<ffffffff8118cb10>] ? ub_slab_ptr+0x20/0x90
<4>[46267.087081]  [<ffffffff8118f2e8>] ? kmem_cache_alloc+0xd8/0x1e0
<4>[46267.087151]  [<ffffffff81445599>] sys_sendto+0x139/0x190
<4>[46267.087229]  [<ffffffff81448c0d>] ? sock_setsockopt+0x16d/0x6f0
<4>[46267.087303]  [<ffffffff810efa47>] ? audit_syscall_entry+0x1d7/0x200
<4>[46267.087378]  [<ffffffff810ef795>] ? __audit_syscall_exit+0x265/0x290
<4>[46267.087454]  [<ffffffff81474885>] ? compat_sys_setsockopt+0x75/0x210
<4>[46267.087531]  [<ffffffff81474b5f>] compat_sys_socketcall+0x13f/0x210
<4>[46267.087607]  [<ffffffff8104dea3>] ia32_sysret+0x0/0x5
<4>[46267.087676] Code: 91 20 e2 01 75 29 48 89 de 4c 89 f7 e8 56 fa ff ff 85 c0 0f 84 68 fc ff ff 0f b6 4d c6 41 8b 45 00 e9 4d fb ff ff e8 7c 19 e9 e0 <0f> 0b eb fe f6 05 17 91 20 e2 80 74 ce 80 3d 5f 2e 00 00 00 74
<1>[46267.088023] RIP  [<ffffffffa01e00a4>] nf_nat_setup_info+0x564/0x590

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The following commands trigger an oops:

 # nft -i
 nft> add table filter
 nft> add chain filter input { type filter hook input priority 0; }
 nft> add chain filter test
 nft> add rule filter input jump test
 nft> delete chain filter test

We need to check the chain use counter before allowing destruction since
we might have references from sets or jump rules.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=69341Reported-by: Matthew Ife <deleriux1@gmail.com>
Tested-by: Matthew Ife <deleriux1@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

We want to make sure that the information that we get from the kernel can
be reinjected without troubles. The kernel shouldn't return an attribute
that is not required, or even prohibited.

Dumping unconditionally NFTA_CT_DIRECTION could lead an application in
userspace to interpret that the attribute was originally set, while it
was not.
Signed-off-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

If a fwmark is passed to ip_vs_conn_new(), it is passed in
vaddr, not daddr. Therefore we should set AF to AF_UNSPEC in
vaddr assignment (like we do in ip_vs_ct_in_get()), otherwise we
may copy only first 4 bytes of an IPv6 address into cp->daddr.
Signed-off-by: Bogdano Arendartchuk <barendartchuk@suse.com>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>

From 038a821667f62c496f2bbae27081b1b612122a97 Mon Sep 17 00:00:00 2001
From: Martin Schwenke <martin@meltin.net>
Date: Tue, 28 Jan 2014 15:16:49 +1100
Subject: [PATCH] net: Document promote_secondaries

This option was added a long time ago...

  commit 8f937c60
  Author: Harald Welte <laforge@gnumonks.org>
  Date:   Sun May 29 20:23:46 2005 -0700

    [IPV4]: Primary and secondary addresses
Signed-off-by: Martin Schwenke <martin@meltin.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

When dealing with icmp messages, the skb->data points the
ip header that triggered the sending of the icmp message.

In gre_cisco_err(), the parse_gre_header() is called, and the
iptunnel_pull_header() is called to pull the skb at the end of
the parse_gre_header(), so the skb->data doesn't point the
inner ip header.

Unfortunately, the ipgre_err still needs those ip addresses in
inner ip header to look up tunnel by ip_tunnel_lookup().

So just use icmp_hdr() to get inner ip header instead of skb->data.
Signed-off-by: Duan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Indentation mismatch spotted with Coverity.
Introduced in 4e3b35b0 ("i40e: add DCB and DCBNL support")
Signed-off-by: Dave Jones <davej@fedoraproject.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes grant transfer releasing code from netfront, and uses
gnttab_end_foreign_access to end grant access since
gnttab_end_foreign_access_ref may fail when the grant entry is
currently used for reading or writing.

* clean up grant transfer code kept from old netfront(2.6.18) which grants
pages for access/map and transfer. But grant transfer is deprecated in current
netfront, so remove corresponding release code for transfer.

* fix resource leak, release grant access (through gnttab_end_foreign_access)
and skb for tx/rx path, use get_page to ensure page is released when grant
access is completed successfully.

Xen-blkfront/xen-tpmfront/xen-pcifront also have similar issue, but patches
for them will be created separately.

V6: Correct subject line and commit message.

V5: Remove unecessary change in xennet_end_access.

V4: Revert put_page in gnttab_end_foreign_access, and keep netfront change in
single patch.

V3: Changes as suggestion from David Vrabel, ensure pages are not freed untill
grant acess is ended.

V2: Improve patch comments.
Signed-off-by: Annie Li <annie.li@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will allow us to use bigger receive buffer, and prevent allocation failure
due to fragmented memory.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is race condition when call netif_napi_add() after
register_netdevice(), as ->open() can be called without napi initialized
and trigger BUG_ON() on napi_enable(), like on below messages:

[    9.699863] sky2: driver version 1.30
[    9.699960] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[    9.700020] sky2 0000:02:00.0: irq 45 for MSI/MSI-X
[    9.700498] ------------[ cut here ]------------
[    9.703391] kernel BUG at include/linux/netdevice.h:501!
[    9.703391] invalid opcode: 0000 [#1] PREEMPT SMP
<snip>
[    9.830018] Call Trace:
[    9.830018]  [<fa996169>] sky2_open+0x309/0x360 [sky2]
[    9.830018]  [<c1007210>] ? via_no_dac+0x40/0x40
[    9.830018]  [<c1007210>] ? via_no_dac+0x40/0x40
[    9.830018]  [<c135ed4b>] __dev_open+0x9b/0x120
[    9.830018]  [<c1431cbe>] ? _raw_spin_unlock_bh+0x1e/0x20
[    9.830018]  [<c135efd9>] __dev_change_flags+0x89/0x150
[    9.830018]  [<c135f148>] dev_change_flags+0x18/0x50
[    9.830018]  [<c13bb8e0>] devinet_ioctl+0x5d0/0x6e0
[    9.830018]  [<c13bcced>] inet_ioctl+0x6d/0xa0

To fix the problem patch changes the order of initialization.

Bug report:
https://bugzilla.kernel.org/show_bug.cgi?id=67151

Reported-and-tested-by: ebrahim.azarisooreh@gmail.com
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

I see a memory leak when using a transparent HTTP proxy using TPROXY
together with TCP early demux and Kernel v3.8.13.15 (Ubuntu stable):

unreferenced object 0xffff88008cba4a40 (size 1696):
  comm "softirq", pid 0, jiffies 4294944115 (age 8907.520s)
  hex dump (first 32 bytes):
    0a e0 20 6a 40 04 1b 37 92 be 32 e2 e8 b4 00 00  .. j@..7..2.....
    02 00 07 01 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff810b710a>] kmem_cache_alloc+0xad/0xb9
    [<ffffffff81270185>] sk_prot_alloc+0x29/0xc5
    [<ffffffff812702cf>] sk_clone_lock+0x14/0x283
    [<ffffffff812aaf3a>] inet_csk_clone_lock+0xf/0x7b
    [<ffffffff8129a893>] netlink_broadcast+0x14/0x16
    [<ffffffff812c1573>] tcp_create_openreq_child+0x1b/0x4c3
    [<ffffffff812c033e>] tcp_v4_syn_recv_sock+0x38/0x25d
    [<ffffffff812c13e4>] tcp_check_req+0x25c/0x3d0
    [<ffffffff812bf87a>] tcp_v4_do_rcv+0x287/0x40e
    [<ffffffff812a08a7>] ip_route_input_noref+0x843/0xa55
    [<ffffffff812bfeca>] tcp_v4_rcv+0x4c9/0x725
    [<ffffffff812a26f4>] ip_local_deliver_finish+0xe9/0x154
    [<ffffffff8127a927>] __netif_receive_skb+0x4b2/0x514
    [<ffffffff8127aa77>] process_backlog+0xee/0x1c5
    [<ffffffff8127c949>] net_rx_action+0xa7/0x200
    [<ffffffff81209d86>] add_interrupt_randomness+0x39/0x157

But there are many more, resulting in the machine going OOM after some
days.

From looking at the TPROXY code, and with help from Florian, I see
that the memory leak is introduced in tcp_v4_early_demux():

  void tcp_v4_early_demux(struct sk_buff *skb)
  {
    /* ... */

    iph = ip_hdr(skb);
    th = tcp_hdr(skb);

    if (th->doff < sizeof(struct tcphdr) / 4)
        return;

    sk = __inet_lookup_established(dev_net(skb->dev), &tcp_hashinfo,
                       iph->saddr, th->source,
                       iph->daddr, ntohs(th->dest),
                       skb->skb_iif);
    if (sk) {
        skb->sk = sk;

where the socket is assigned unconditionally to skb->sk, also bumping
the refcnt on it.  This is problematic, because in our case the skb
has already a socket assigned in the TPROXY target.  This then results
in the leak I see.

The very same issue seems to be with IPv6, but haven't tested.
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Veaceslav Falico says:

====================
bonding: fix locking in bond_ab_arp_prob

After the latest patches, on every call of bond_ab_arp_probe() without an
active slave I see the following warning:

[    7.912314] RTNL: assertion failed at net/core/dev.c (4494)
...
[    7.922495]  [<ffffffff817acc6f>] dump_stack+0x51/0x72
[    7.923714]  [<ffffffff8168795e>] netdev_master_upper_dev_get+0x6e/0x70
[    7.924940]  [<ffffffff816a2a66>] rtnl_link_fill+0x116/0x260
[    7.926143]  [<ffffffff817acc6f>] ? dump_stack+0x51/0x72
[    7.927333]  [<ffffffff816a350c>] rtnl_fill_ifinfo+0x95c/0xb90
[    7.928529]  [<ffffffff8167af2b>] ? __kmalloc_reserve+0x3b/0xa0
[    7.929681]  [<ffffffff8167bfcf>] ? __alloc_skb+0x9f/0x1e0
[    7.930827]  [<ffffffff816a3b64>] rtmsg_ifinfo+0x84/0x100
[    7.931960]  [<ffffffffa00bca07>] bond_ab_arp_probe+0x1a7/0x370 [bonding]
[    7.933133]  [<ffffffffa00bcd78>] bond_activebackup_arp_mon+0x1a8/0x2f0 [bonding]
...

It happens because in bond_ab_arp_probe() we change the flags of a slave
without holding the RTNL lock.

To fix this - remove the useless curr_active_lock, RCUify it and lock RTNL
while changing the slave's flags. Also, remove bond_ab_arp_probe() from
under any locks in bond_ab_arp_mon().
====================
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we're calling it from under RCU context, however we're using some
functions that require rtnl to be held.

Fix this by restructuring the locking - don't call it under any locks,
aquire rcu_read_lock() if we're sending _only_ (i.e. we have the active
slave present), and use rtnl locking otherwise - if we need to modify
(in)active flags of a slave.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently bond_ab_arp_probe() is always called under rcu_read_lock(),
however to work with curr_active_slave we're still holding the
curr_slave_lock.

To remove that curr_slave_lock - rcu_dereference the bond's
curr_active_slave and use it further - so that we're sure the slave won't
go away, and we don't care if it will change in the meanwhile.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Recently I added a new AF_PACKET fanout operation mode in commit
2d36097d, but I forgot to document it.  Add PACKET_FANOUT_QM as an available mode
in the af_packet documentation.  Applies to net-next.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Submission d9aee591 "bnx2x: Don't release PCI bars on shutdown" separated
the PCI remove and shutdown flows, but pci_disable_device() is still
being called on both.
As a result, a dev_WARN_ONCE will be hit during shutdown for every bnx2x
VF probed on a hypervisor (as its shutdown callback will be called and later
pci_disable_sriov() will call its remove callback).

This calls the pci_disable_device() only on the remove flow.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PTR_RET is deprecated. Use PTR_ERR_OR_ZERO instead. While at it
also include missing err.h header.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Logging the MAC address on every if-up, is not really useful, and annoying when
there is no cable inserted and NetworkManager tries the ifup every 50 seconds.

Also change the log level from warning to info, as that is what it is.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Logging a PTP error on hw which simply does not support PTP is not very
useful. Moreover this message gets logged on every if-up, and if there is
no cable inserted NetworkManager will re-try the ifup every 50 seconds.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/8390/apne.c: In function ‘apne_probe1’:
drivers/net/ethernet/8390/apne.c:215: warning: unused variable ‘ei_local’

Introduced by commit c45f812f ("8390 :
Replace ei_debug with msg_enable/NETIF_MSG_* feature"), which added the
variable without using it.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This moves part of Eric Dumazets skb_gso_seglen helper from tbf sched to
skbuff core so it may be reused by upcoming ip forwarding path patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull UML changes from Richard Weinberger:
 "This time only various cleanups and housekeeping patches"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: hostfs: make functions static
  um: Include generic barrier.h
  um: Removed unused attributes from thread_struct

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.14:

  Core:
   - Avoid get_cd() on cards marked nonremovable

  Drivers:
   - arasan: New driver for controllers found in e.g. Xilinx Zynq SoC
   - dwmmc: Support Hisilicon K3 SoC controllers
   - esdhc-imx: Support for HS200 mode, DDR modes on MX6, runtime PM
   - sdhci-pci: Support O2Micro/BayHubTech controllers used in laptops
     like Lenovo ThinkPad W540, Dell Latitude E5440, Dell Latitude E6540
   - tegra: Support Tegra124 SoCs"

* tag 'mmc-updates-for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (55 commits)
  mmc: sdhci-pci: Fix possibility of chip->fixes being null
  mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend
  mmc: sdhci: Allow for long command timeouts
  mmc: sdio: add a quirk for broken SDIO_CCCR_INTx polling
  mmc: sdhci: fix lockdep error in tuning routine
  mmc: dw_mmc: k3: remove clk_table
  mmc: dw_mmc: fix dw_mci_get_cd
  mmc: dw_mmc: fix sparse non static symbol warning
  mmc: sdhci-esdhc-imx: fix warning during module remove function
  mmc: sdhci-esdhc-imx: fix access hardirq-unsafe lock in atomic context
  mmc: core: sd: implement proper support for sd3.0 au sizes
  mmc: atmel-mci: add vmmc-supply support
  mmc: sdhci-pci: add broken HS200 quirk for Intel Merrifield
  mmc: sdhci: add quirk for broken HS200 support
  mmc: arasan: Add driver for Arasan SDHCI
  mmc: dw_mmc: add dw_mmc-k3 for k3 platform
  mmc: dw_mmc: use slot-gpio to handle cd pin
  mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts
  mmc: sdhci-pci: break out definitions to header file
  mmc: tmio: fixup compile error
  ...

Conflicts:
	MAINTAINERS

Pull 9p changes from Eric Van Hensbergen:
 "Included are a new cache model for support of mmap, and several
  cleanups across the filesystem and networking portions of the code"

* tag 'for-3.14-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: update documentation
  9P: introduction of a new cache=mmap model.
  net/9p: remove virtio default hack and set appropriate bits instead
  9p: remove useless 'name' variable and assignment
  9p: fix return value in case in v9fs_fid_xattr_set()
  9p: remove useless variable and assignment
  9p: remove useless assignment
  9p: remove unused 'super_block' struct pointer
  9p: remove never used return variable
  9p: remove unused 'p9_fid' struct pointer
  9p: remove unused 'p9_client' struct pointer

The hostfs_*() callback functions are all only used within
hostfs_kern.c, so make them static.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: Richard Weinberger <richard@nod.at>

...to get smp_store_release().
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Richard Weinberger <richard@nod.at>

temp_stack and mm_count have no users and can be killed.
Signed-off-by: Richard Weinberger <richard@nod.at>

Merge ipmi fixes from Corey Minyard:
 "Just some collected fixes for 3.14.  Nothing huge"

* emailed patches from Corey Minyard <minyard@acm.org>:
  ipmi: Cleanup error return
  ipmi: fix timeout calculation when bmc is disconnected
  ipmi: use USEC_PER_SEC instead of 1000000 for more meaningful
  ipmi: remove deprecated IRQF_DISABLED

Return proper errors for a lot of IPMI failure cases.  Also call
pci_disable_device when IPMI PCI devices are removed.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Loading ipmi_si module while bmc is disconnected, we found the timeout
is longer than 5 secs.  Actually it takes about 3 mins and 20
secs.(HZ=250)

error message as below:
  Dec 12 19:08:59 linux kernel: IPMI BT: timeout in RD_WAIT [ ] 1 retries left
  Dec 12 19:08:59 linux kernel: BT: write 4 bytes seq=0x01 03 18 00 01
  [...]
  Dec 12 19:12:19 linux kernel: IPMI BT: timeout in RD_WAIT [ ]
  Dec 12 19:12:19 linux kernel: failed 2 retries, sending error response
  Dec 12 19:12:19 linux kernel: IPMI: BT reset (takes 5 secs)
  Dec 12 19:12:19 linux kernel: IPMI BT: flag reset [ ]

Function wait_for_msg_done() use schedule_timeout_uninterruptible(1) to
sleep 1 tick, so we should subtract jiffies_to_usecs(1) instead of 100
usecs from timeout.
Reported-by: Hu Shiyuan <hushiyuan@huawei.com>
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use USEC_PER_SEC instead of 1000000, that making the later bugfix
more clearly.
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>