- 29 Dec, 2008 40 commits
-
-
Dirk Heer authored
This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by:
Dirk Heer <d.heer@phytec.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
If removing and reiserting the driver on some devices, tuner type will be unset at the second time. This patch fixes this issue. Signed-off-by: -
Mauro Carvalho Chehab authored
This patch cleans up the entries of xc2028/3028, since those devices don't need or use a tda9887. Signed-off-by: -
Mauro Carvalho Chehab authored
Pixelview uses a Sigmatel stac codec. It has an external line out pin, connected to AC97_MASTER_VOL. It also provides I2S output, but using a Signed-off-by: -
Mauro Carvalho Chehab authored
Some devices use more than one AC97 outputs. This patch allows such devices to properly work. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Some boards use different AC97 setups for output. This patch adds the capability of specifying the output to be used. Currently, only one output is selected, but the better is to allow user to select it via a mixer, on alsa driver. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Oldrich Jedlicka authored
Signed-off-by:
Oldřich Jedlička <oldium.pro@seznam.cz> Signed-off-by:
-
Alain Kalker authored
Adds support for the Digittrade DVB-T USB Stick remote. As the Digittrade USB stick identifies itself as a generic Afatech AF9015 device, the remote cannot be autodetected. To enable it, add the following to /etc/modprobe.d/dvb-usb-af9015 or /etc/modprobe.conf: options dvb-usb-af9015 remote=4 Signed-off-by:
Alain Kalker <miki@dds.nl> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Laurent Pinchart authored
Add a trailing newline character after calling v4l_printk_ioctl() to avoid messing the kernel log up and merge the uvc_v4l2_ioctl message with the ioctl name. Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Laurent Pinchart authored
Sonix-based cameras seem to require the host to commit video streaming parameters before selecting the alternate endpoint. While most applications issue a VIDIOC_S_FMT ioctl before starting streaming, this is not required by the V4L2 specification. The problem has been noticed on Ubuntu 8.10 with applications using libv4l. The library blocks VIDIOC_S_FMT calls when the requested format is identical to the currently selected format. As the driver commits video streaming parameters when initialising the device, only the first run of a libv4l-enabled application would succeed. For the sake of completeness, experiment showed that the camera keeps sending 12 bytes isochronous packets (header only, no data) without toggling the FID bit if video streaming parameters haven't been committed before selecting the alternate endpoint. Signed-off-by:
-
Michael Hennerich authored
Use the unaligned memory access macros when accessing unaligned memory. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
Bryan Wu <cooloney@kernel.org> Signed-off-by:
-
Laurent Pinchart authored
Replace combination of endianess conversion and unaligned access macros with {get|set}_unaligned_*. Signed-off-by: -
Devin Heitmueller authored
Convert the calls that write the i2c clock register over to the new em28xx_write_reg() function that allows for or'ing bits Signed-off-by:
Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by:
-
Devin Heitmueller authored
Introduce a new function that writes to a single register. This is useful because the vast majority of register writes are a single register, and this format permits or'ing register value bits together. Signed-off-by:
-
Jelle Foks authored
Please accept this patch to refer to my new email address Signed-off-by:
Jelle Foks <jelle@foks.us> Signed-off-by:
-
Mauro Carvalho Chehab authored
AC97 devices provide several input and outputs. However, before this patch, em28xx device weren't properly allowing the usage of ac97 possible combinations. Also, several input volumes were left untouched, instead of making sure that the volumes were set on mute state. This patch improves support for ac97 devices by allowing to use any inputs, and making sure that unused inputs are set on mute state. Yet, some work is still needed to select the AC97 output. Signed-off-by: -
Mauro Carvalho Chehab authored
This makes easier to identify vendor ID, since AC97 vendors are generally identified by 3 bytes. The remaining byte is used by the vendor to identify its devices. Signed-off-by: -
Mauro Carvalho Chehab authored
This patch properly implements audio handling on em28xx. Before this patch, it was assumed that every device has an Empia 202 audio chip. However, this is not true. After this patch, specific AC97 chipset setup and configurations can be done. Signed-off-by: -
Mauro Carvalho Chehab authored
audio mux entries were described by 0 and 1 magic numers. Use an enum alias for each entry type. Signed-off-by: -
Mauro Carvalho Chehab authored
This patch parepares for an audio refactor patch that auto-detects ac97 chips. Signed-off-by: -
Devin Heitmueller authored
Make use of the em28xx chip configuration register to determine whether we have AC97 audio, I2S audio, or no audio support at all. Thanks for Ray Lu from Empia for providing the em2860/em2880 datasheet. Signed-off-by:
-
Devin Heitmueller authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Previously, AC97 registers were named as if they were part of em28xx device, generating some confusion. Replace such names for a more general naming convention. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Julia Lawall authored
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @i@ @@ @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(E[...])) + ARRAY_SIZE(E) @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Harvey Harrison authored
Noticed by sparse: drivers/media/dvb/dvb-usb/af9015.c:756:25: warning: restricted __le16 degrades to integer drivers/media/dvb/dvb-usb/af9015.c:744:28: warning: restricted __le16 degrades to integer Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Harvey Harrison authored
All noticed by sparse: drivers/media/dvb/dvb-usb/cinergyT2-core.c:35:5: warning: symbol 'disable_remote' was not declared. Should it be static? drivers/media/dvb/dvb-usb/cinergyT2-core.c:48:23: warning: symbol 'cinergyt2_usb_device' was not declared. Should it be static? drivers/media/dvb/dvb-usb/cinergyT2-fe.c:160:15: warning: cast to restricted __le16 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:190:9: warning: cast to restricted __le32 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:208:9: warning: cast to restricted __le32 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:227:24: warning: cast to restricted __le16 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: warning: incorrect type in assignment (different base types) drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: expected unsigned short [unsigned] [assigned] [usertype] tps drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: got restricted __le16 [usertype] <noident> drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: warning: incorrect type in assignment (different base types) drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: expected unsigned int [unsigned] [assigned] [usertype] freq drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: got restricted __le32 [usertype] <noident> Cc: Thierry Merle <thierry.merle@free.fr> Signed-off-by:
-
Devin Heitmueller authored
Place the s5h1411 into low power mode until first use (to handle the case where the user plugs in the device and then doesn't use it for a while). On the Pinnacle 801e, this brings the power usage from 126ma down to 82ma. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Devin Heitmueller authored
Add support for the ATI TV Wonder HD 600 USB Remote Control (required a new keymap) [mchehab@redhat.com: Fix CodingStyle] Signed-off-by:
-
Devin Heitmueller authored
Refactor the em28xx IR support based on the em2860/em2880 and em2874 datasheets. Tested on the HVR-950 (em2883), Pinnacle 800e (em2883), Pinnacle 80e (em2874) using the remote controls that came with those products. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Mauro Carvalho Chehab authored
The first em28xx were based on i2c IR's. However, some newer designs are coming with a polling-based IR. Those are done by reading a register set at em28xx. This patch adds core polling support for those devices. Later patches will add support for some device-specific IR's. This patch adds the same basic IR polling code used by bttv, cx88 and saa7134, and shares the common getkey masks defined at ir-common. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Devin Heitmueller authored
Add registration for Pinnacle 80e ATSC tuner Register the em2874 based Pinnacle 80e device. Note that support for this device also requires the new drx-j driver (which is not available yet) Thanks for Ray Lu from Empia for providing the em2874 datasheet. Thanks to Joerg Schindler from Pinnacle for providing sample hardware. Thanks to Rainer Miethling from Pinnacle for providing engineering support. Signed-off-by:
-
Devin Heitmueller authored
Properly support capture start on em2874 The transport stream enable register moved in the em2874, so make it work properly. Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by:
-
