- 11 Jan, 2018 1 commit
-
-
Jason Yan authored
In commit 87c8331f ("[SCSI] libsas: prevent domain rediscovery competing with ata error handling") introduced disco mutex to prevent rediscovery competing with ata error handling and put the whole revalidation in the mutex. But the rphy add/remove needs to wait for the error handling which also grabs the disco mutex. This may leads to dead lock.So the probe and destruct event were introduce to do the rphy add/remove asynchronously and out of the lock. The asynchronously processed workers makes the whole discovery process not atomic, the other events may interrupt the process. For example, if a loss of signal event inserted before the probe event, the sas_deform_port() is called and the port will be deleted. And sas_port_delete() may run before the destruct event, but the port-x:x is the top parent of end device or expander. This leads to a kernel WARNING such as: [ 82.042979] sysfs group 'power' not found for kobject 'phy-1:0:22' [ 82.042983] ------------[ cut here ]------------ [ 82.042986] WARNING: CPU: 54 PID: 1714 at fs/sysfs/group.c:237 sysfs_remove_group+0x94/0xa0 [ 82.043059] Call trace: [ 82.043082] [<ffff0000082e7624>] sysfs_remove_group+0x94/0xa0 [ 82.043085] [<ffff00000864e320>] dpm_sysfs_remove+0x60/0x70 [ 82.043086] [<ffff00000863ee10>] device_del+0x138/0x308 [ 82.043089] [<ffff00000869a2d0>] sas_phy_delete+0x38/0x60 [ 82.043091] [<ffff00000869a86c>] do_sas_phy_delete+0x6c/0x80 [ 82.043093] [<ffff00000863dc20>] device_for_each_child+0x58/0xa0 [ 82.043095] [<ffff000008696f80>] sas_remove_children+0x40/0x50 [ 82.043100] [<ffff00000869d1bc>] sas_destruct_devices+0x64/0xa0 [ 82.043102] [<ffff0000080e93bc>] process_one_work+0x1fc/0x4b0 [ 82.043104] [<ffff0000080e96c0>] worker_thread+0x50/0x490 [ 82.043105] [<ffff0000080f0364>] kthread+0xfc/0x128 [ 82.043107] [<ffff0000080836c0>] ret_from_fork+0x10/0x50 Make probe and destruct a direct call in the disco and revalidate function, but put them outside the lock. The whole discovery or revalidate won't be interrupted by other events. And the DISCE_PROBE and DISCE_DESTRUCT event are deleted as a result of the direct call. Introduce a new list to destruct the sas_port and put the port delete after the destruct. This makes sure the right order of destroying the sysfs kobject and fix the warning above. In sas_ex_revalidate_domain() have a loop to find all broadcasted device, and sometimes we have a chance to find the same expander twice. Because the sas_port will be deleted at the end of the whole revalidate process, sas_port with the same name cannot be added before this. Otherwise the sysfs will complain of creating duplicate filename. Since the LLDD will send broadcast for every device change, we can only process one expander's revalidation. [mkp: kbuild test robot warning] Signed-off-by:
Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
- 09 Jan, 2018 11 commits
-
-
Jason Yan authored
Now we are processing sas event and discover event in different workqueues. It's safe to wait the discover event done in the sas event work. Use flush_workqueue() to insure the disco and revalidate events processed synchronously so that the whole discover and revalidate process will not be interrupted by other events. Signed-off-by:
-
Jason Yan authored
Now all libsas works are queued to scsi host workqueue, include sas event work post by LLDD and sas discovery work, and a sas hotplug flow may be divided into several works, e.g libsas receive a PORTE_BYTES_DMAED event, currently we process it as following steps: sas_form_port --- run in work in shost workq sas_discover_domain --- run in another work in shost workq ... sas_probe_devices --- run in new work in shost workq We found during hot-add a device, libsas may need run several works in same workqueue to add device in system, the process is not atomic, it may interrupt by other sas event works, like PHYE_LOSS_OF_SIGNAL. This patch is preparation of execute libsas sas event in sync. We need to use different workqueue to run sas event and disco event. Otherwise the work will be blocked for waiting another chained work in the same workqueue. Signed-off-by:
Yijing Wang <wangyijing@huawei.com> CC: John Garry <john.garry@huawei.com> CC: Johannes Thumshirn <jthumshirn@suse.de> CC: Ewan Milne <emilne@redhat.com> CC: Christoph Hellwig <hch@lst.de> CC: Tomas Henzl <thenzl@redhat.com> CC: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Jason Yan authored
Add a sysfs attr that LLDD can configure it for every host. We made an example in hisi_sas. Other LLDDs using libsas can implement it if they want. Suggested-by:
-
Jason Yan authored
If the PHY burst too many events, we will alloc a lot of events for the worker. This may leads to memory exhaustion. Dan Williams suggested to shut down the PHY if the events reached the threshold, because in this case the PHY may have gone into some erroneous state. Users can re-enable the PHY by sysfs if they want. We cannot use the fixed memory pool because if we run out of events, the shut down event and loss of signal event will lost too. The events still need to be allocated and processed in this case. Suggested-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Jason Yan authored
Now libsas hotplug work is static, every sas event type has its own static work, LLDD driver queues the hotplug work into shost->work_q. If LLDD driver burst posts lots hotplug events to libsas, the hotplug events may pending in the workqueue like shost->work_q new work[PORTE_BYTES_DMAED] --> |[PHYE_LOSS_OF_SIGNAL][PORTE_BYTES_DMAED] -> processing |<-------wait worker to process-------->| In this case, a new PORTE_BYTES_DMAED event coming, libsas try to queue it to shost->work_q, but this work is already pending, so it would be lost. Finally, libsas delete the related sas port and sas devices, but LLDD driver expect libsas add the sas port and devices(last sas event). This patch use dynamic allocated work to avoid this issue. Signed-off-by: -
Xiongfeng Wang authored
gcc-8 reports drivers/message/fusion/mptbase.c: In function 'mpt_display_event_info': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified bound 100 equals destination size [-Wstringop-truncation] We need to use strlcpy() to make sure the dest string is nul-terminated. Signed-off-by:
Xiongfeng Wang <xiongfeng.wang@linaro.org> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Colin Ian King authored
A previous commit no longer stores the contents of c, so we now have a situation where c is being updated but the value is never read. Clean up the code by removing the now redundant setting of variable c. Cleans up clang warning: drivers/scsi/aacraid/aachba.c:943:3: warning: Value stored to 'c' is never read Fixes: f4e8708d ("scsi: aacraid: Fix udev inquiry race condition") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by:
-
Varun Prakash authored
For mgmt cmds ->alloc_pdu() can be called from atomic context so use GFP_ATOMIC instead of GFP_KERNEL. Signed-off-by:
Varun Prakash <varun@chelsio.com> Signed-off-by:
-
chenxiang authored
The status of SAS PHY is in sas_phy->enabled. There is an issue that the status of a remote SAS PHY may be initialized incorrectly: if disable remote SAS PHY through sysfs interface (such as echo 0 > /sys/class/sas_phy/phy-1:0:0/enable), then reboot the system, and we will find the status of remote SAS PHY which is disabled before is 1 (cat /sys/class/sas_phy/phy-1:0:0/enable). But actually the status of remote SAS PHY is disabled and the device attached is not found. In SAS protocol, NEGOTIATED LOGICAL LINK RATE field of DISCOVER response is 0x1 when remote SAS PHY is disabled. So initialize sas_phy->enabled according to the value of NEGOTIATED LOGICAL LINK RATE field. Signed-off-by:
chenxiang <chenxiang66@hisilicon.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Jason Yan authored
The intend purpose here was to goto out if smp_execute_task() returned error. Obviously something got screwed up. We will never get these link error statistics below: ~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count 0 Obviously we should goto error handler if smp_execute_task() returns non-zero. Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Signed-off-by:
-
Jason Yan authored
We've got a memory leak with the following producer: while true; do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null; done The buffer req is allocated and not freed after we return. Fix it. Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Signed-off-by:
-
- 08 Jan, 2018 1 commit
-
-
Andy Shevchenko authored
Using this extension reduces the object size. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
- 04 Jan, 2018 27 commits
-
-
Himanshu Jha authored
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset 0. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Suggested-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Acked-by:
Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by:
-
Himanshu Jha authored
Use vzalloc instead of vmalloc followed by memset 0. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Suggested-by:
Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by:
-
Himanshu Jha authored
Use dma_zalloc_coherent and vzalloc instead of dma_alloc_coherent and vmalloc respectively, followed by memset 0. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Suggested-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Himanshu Jha authored
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset 0. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci Suggested-by:
-
Meelis Roos authored
The battery in my HP NetRAID-4M died of old age, and the aacraid driver started oopsing with NULL pointer dereference on startup after that. Fix it by reordering the init sequence to fill in function pointers before ioremapping memory, or dev->a_ops.adapter_ioremap pointer will be NULL. Other subtypes of aacraid seem to have the order already correct. This was the call trace: ? aac_probe_one+0x7a5/0xb30 [aacraid] pci_device_probe+0xc0/0x1a0 driver_probe_device+0x1df/0x3b0 __driver_attach+0xa9/0xe0 ? driver_probe_device+0x3b0/0x3b0 bus_for_each_dev+0x4c/0x90 driver_attach+0x1d/0x40 ? driver_probe_device+0x3b0/0x3b0 bus_add_driver+0x1a7/0x2a0 driver_register+0x6e/0x130 __pci_register_driver+0x54/0x90 ? 0xf81f4000 aac_init+0x2b/0x1000 [aacraid] do_one_initcall+0x45/0x1e0 ? kfree_skbmem+0x74/0xa0 ? kfree+0x16d/0x240 ? kvfree+0x45/0x50 ? kvfree+0x45/0x50 ? __vunmap+0x99/0x120 ? do_init_module+0x1a/0x245 do_init_module+0x83/0x245 load_module+0x2764/0x34a0 ? kernel_read_file+0x150/0x320 SyS_finit_module+0x82/0xa0 do_fast_syscall_32+0xba/0x340 Signed-off-by:
Meelis Roos <mroos@linux.ee> Reviewed-by:
-
himanshu.madhani@cavium.com authored
Signed-off-by:
-
Quinn Tran authored
Add free_pending flag to serialize queueing of free_work element onto the work queue Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Quinn Tran authored
for session deletion, replace sess_lock with work_lock. Under certain case sess_lock is not feasiable to acquire. The lock is needed temporarily to make sure a single call to schedule of the work element. Signed-off-by:
-
Quinn Tran authored
Immeadiate flag is not used for scheduling session deletion. Remove it to simplfy session deletion code path. Signed-off-by:
-
Quinn Tran authored
This patch adds check for pending work event before queueing relogin work to prevent redundant work to be active at the same time. Signed-off-by:
-
Quinn Tran authored
Add check to allow single discovery command per session to be sent Signed-off-by:
-
Quinn Tran authored
Switch scan is assumed to succeed most of the time. If the scan failed, then scan is limit 5 retries. Signed-off-by:
-
Quinn Tran authored
Delay loop id allocation to login time Signed-off-by:
-
Quinn Tran authored
Add verbose bit for debug messages to reduce excessive log messages Signed-off-by:
-
himanshu.madhani@cavium.com authored
When any kind of reset is issued, current code was setting state of LOGIN pending too early. This resulted into driver not retrying relogin until pervious reloin completes. Signed-off-by:
-
Quinn Tran authored
add ability to use gpnft/gnnft to handle RSCN. Signed-off-by:
-
Quinn Tran authored
This patch fixes issue with extraction of ADISC error codes for decoding the error returned Signed-off-by:
-
Quinn Tran authored
retry gpnft/gnnft if error is encountered. Signed-off-by:
-
Quinn Tran authored
Current code creates a session when a new port is discovered, and a PLOGI/PRLI is received. There is no need to create session when command has arrived. Signed-off-by:
-
Quinn Tran authored
Migrate switch registration commands: RFTID, RFFID, RNNID and RSNN_NN out of mailbox interface to reduce fabric scan bottle neck. Signed-off-by:
-
Quinn Tran authored
Relogin stop moving forward due to improper check of scan_state flag. Signed-off-by:
-
Quinn Tran authored
Add NPIV id check to reduce multiple debug messages of the same RSCN event. Signed-off-by:
-
Quinn Tran authored
reduce usage of terminate exchange when command encounter resource bottle neck. Remote initiator view it as command drop. Signed-off-by:
-
Quinn Tran authored
Host lookup via btree is currently protected by the hardware_lock. Add hardware_lock when modifying btree to store host pointer. Signed-off-by:
-
Quinn Tran authored
- add "async" gpn_ft, gnn_ft, gfpn_id, gnn_id switch commands. - For 8G and newer adapters, use async commands when it comes to fabric scan to reduce bottle neck. Signed-off-by:
-
himanshu.madhani@cavium.com authored
Signed-off-by:
-
Quinn Tran authored
When connection type is N_Port to N_Port (point-to-point), there is a possibilty where initiator will not send PLOGI request and will directly send PRLI. In N2N connection the port has higher port name sends the PLOGI but not allow to send PRLI if is a target mode. Only initiator is allowed to send PRLI. Current driver code deletes old session when it receives PLOGI request. If we will not receive PLOGI request then we will not delete old session and create new session. Add check for N2N with PRLI receive only and trigger cleanup. For this case, the cleanup requires individual cmd abort instead of using implicit logout as a broad stroke flush. Signed-off-by:
Krishna Kant <krishna.kant@purestorage.com> Signed-off-by:
Alexei Potashnik <alexei@purestorage.com> Signed-off-by:
-
