- 21 Mar, 2015 1 commit
-
-
He Kuang authored
Perf tries to find probe function addresses from map when debuginfo could not be found. To the first added function, the value of ref_reloc_sym was set in maps__set_kallsyms_ref_reloc_sym() and can be obtained from host_machine->kmaps->maps. After that, new maps are added to host_machine->kmaps->maps in dso__load_kcore(), all these new added maps do not have a valid ref_reloc_sym. When adding a second function, get_target_map() may get a map without valid ref_reloc_sym, and raise the error "Relocated base symbol is not found". Fix this by using kernel_get_ref_reloc_sym() to get ref_reloc_sym. This problem can be reproduced as following: $ perf probe --add='sys_write' --add='sys_open' Relocated base symbol is not found! Error: Failed to add events. After this patch: $ perf probe --add='sys_write' --add='sys_open' Added new event: probe:sys_write (on sys_write) You can now use it in all perf tools, such as: perf record -e probe:sys_write -aR sleep 1 Added new event: probe:sys_open (on sys_open) You can now use it in all perf tools, such as: perf record -e probe:sys_open -aR sleep 1 Signed-off-by:He Kuang <hekuang@huawei.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426816616-2394-1-git-send-email-hekuang@huawei.comSigned-off-by:
-
- 20 Mar, 2015 4 commits
-
-
Yunlong Song authored
They are all auto-generated files during the perf building. Before this patch: $ git status Untracked files: (use "git add <file>..." to include in what will be committed) config/feature-checks/test-all.make.output config/feature-checks/test-backtrace.make.output config/feature-checks/test-bionic.make.output config/feature-checks/test-dwarf.make.output config/feature-checks/test-fortify-source.make.output config/feature-checks/test-glibc.make.output config/feature-checks/test-gtk2-infobar.make.output config/feature-checks/test-gtk2.make.output config/feature-checks/test-libaudit.make.output config/feature-checks/test-libbabeltrace.make.output config/feature-checks/test-libbfd.make.output config/feature-checks/test-libdw-dwarf-unwind.make.output config/feature-checks/test-libelf-getphdrnum.make.output config/feature-checks/test-libelf-mmap.make.output config/feature-checks/test-libelf.make.output config/feature-checks/test-libnuma.make.output config/feature-checks/test-libperl.make.output config/feature-checks/test-libpython-version.make.output config/feature-checks/test-libpython.make.output config/feature-checks/test-libslang.make.output config/feature-checks/test-libunwind.make.output config/feature-checks/test-pthread-attr-setaffinity-np.make.output config/feature-checks/test-stackprotector-all.make.output config/feature-checks/test-sync-compare-and-swap.make.output config/feature-checks/test-timerfd.make.output config/feature-checks/test-zlib.make.output After this patch: $ git status nothing to commit, working directory clean Signed-off-by:
Yunlong Song <yunlong.song@huawei.com> Tested-by:
Jiri Olsa <jolsa@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1426821638-11227-3-git-send-email-yunlong.song@huawei.comSigned-off-by:
-
Yunlong Song authored
Since commit 4ae61202 ("perf build: Rename PERF-FEATURES into FEATURE-DUMP") renames PERF-FEATURES into FEATURE-DUMP, the .gitignore file should also do this thing for consistency. Signed-off-by:
-
Wang Nan authored
Both 'perf diff' and 'perf mem' have 'field-separator' option, which causes segfault if passed with empty string. This patch uses previously introduced 'OPT_STRING_NOEMPTY' option macro to prevent fault. Signed-off-by:
Wang Nan <wangnan0@huawei.com> Tested-by:
-
Milos Vyletel authored
int build_id_cache__add_s(const char *sbuild_id, const char *debugdir, const char *name, bool is_kallsyms, bool is_vdso) { ... if (access(filename, F_OK)) { ^--------------------------------------------------------- [1] if (is_kallsyms) { if (copyfile("/proc/kallsyms", filename)) goto out_free; } else if (link(realname, filename) && copyfile(name, filename)) ^-----------------------------^------------- [2] \------------ [3] goto out_free; } ... When multiple instances of perf record get to [1] at more or less same time and run access() one or more may get failure because the file does not exist yet (since the first instance did not have chance to link it yet). At this point the race moves to link() at [2] where first thread to get there links file and goes on but second one gets -EEXIST so it runs copyfile [3] which truncates the file. reproducer: rm -rf /root/.debug for cpu in $(awk '/processor/ {print $3}' /proc/cpuinfo); do perf record -a -v -T -F 1000 -C $cpu \ -o perf-${cpu}.data sleep 5 2> /dev/null & done wait and simply search for empty files by: find /lib/modules/`uname -r`/kernel/* -size 0 Signed-off-by:Milos Vyletel <milos@redhat.com> Acked-by:
-
- 19 Mar, 2015 16 commits
-
-
Wang Nan authored
Without this patch, perf report cause segfault if pass "" as '-t': $ perf report -t "" # To display the perf.data header info, please use --header/--header-only options. # # Samples: 37 of event 'syscalls:sys_enter_write' # Event count (approx.): 37 # # Children SelfCommand Shared Object Symbol Segmentation fault Since -t is used to add field-separator for generate table, -t "" is actually meanless. This patch defines a new OPT_STRING_NOEMPTY() option generator to ensure user never pass empty string to that option. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: pi3orama@163.com Cc: Jiri Olsa <jolsa@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1426251114-198991-1-git-send-email-wangnan0@huawei.comSigned-off-by:
-
Wang Nan authored
Commit f1f13af9 ("perf callchain: Cache eh/debug frame offset for dwarf unwind") introduces a cache for .debug_frame and .eh_frame_hdr. Unfortunately, it makes them share a same cache (dso->frame_offset). Which causes unwind failure on ARM: $ perf test unwind Test dwarf unwind: FAILED! The reason is that, if a dso has '.debug_frame' but doesn't have '.eh_frame_hdr' (like ARM), dso->frame_offset will be filled by offset of '.debug_frame' during the first time calling of find_proc_info() -> read_unwind_spec_debug_frame(), and be regarded to '.eh_frame_hdr' when the second time calling of find_proc_info() -> read_unwind_spec_eh_frame(), since '.eh_frame_hdr' is checked prior to '.debug_frame'. This patch solves the problem by creating two cache fields for '.eh_frame_hdr' and '.debug_frame'. Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
-
Yunlong Song authored
Since some functions (e.g. '_get_comp_words_by_ref()') in perf bash completion script are originally taken from git bash completion script, these functions may be preloaded before perf bash completion script runs. In order to avoid repeating loading the same function twice, some test constraints are used before these function definitions in the perf bash completion script (e.g. 'type _get_comp_words_by_ref &>/dev/null ||'). The problem is that, if these functions in perf bash completion script are changed for some reason, perf will still use the preloaded bash functions rather than the customized functions of its own. As a result, the perf bash completion will behave incorrectly. To get rid of this problem, a flag can be defined to determine the proper situation. And to avoid overwriting the preloaded functions, the names of these functions in perf bash completion script should be renamed to the perf-customized ones. Example: Before this patch: $ type _get_comp_words_by_ref _get_comp_words_by_ref is a function _get_comp_words_by_ref () { local exclude flag i OPTIND=1; local cur cword words=(); local upargs=() upvars=() vcur vcword vprev vwords; while getopts "c:i:n:p:w:" flag "$@"; do case $flag in c) vcur=$OPTARG ;; i) vcword=$OPTARG ;; n) exclude=$OPTARG ;; p) vprev=$OPTARG ;; w) vwords=$OPTARG ;; esac; done; while [[ $# -ge $OPTIND ]]; do case ${!OPTIND} in cur) vcur=cur ;; prev) vprev=prev ;; cword) vcword=cword ;; words) vwords=words ;; *) echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" 1>&2; return 1 ;; esac; let "OPTIND += 1"; done; __get_cword_at_cursor_by_ref "$exclude" words cword cur; [[ -n $vcur ]] && { upvars+=("$vcur"); upargs+=(-v $vcur "$cur") }; [[ -n $vcword ]] && { upvars+=("$vcword"); upargs+=(-v $vcword "$cword") }; [[ -n $vprev && $cword -ge 1 ]] && { upvars+=("$vprev"); upargs+=(-v $vprev "${words[cword - 1]}") }; [[ -n $vwords ]] && { upvars+=("$vwords"); upargs+=(-a${#words[@]} $vwords "${words[@]}") }; (( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}" } As shown above, the _get_comp_words_by_ref is the preloaded function in fact, rather than the function defined in perf-completion.sh. So if we happen to change the function for some reason, the result will behave in a wrong state. After this patch: We can set preload_get_comp_words_by_ref="false" to not use the preloaded function. Instead, it will use the function defined in perf-completion.sh, which is renamed as __perf_get_comp_words_by_ref to avoid overwriting the preloaded function _get_comp_words_by_ref. $ type __perf_get_comp_words_by_ref __perf_get_comp_words_by_ref is a function __perf_get_comp_words_by_ref () { local exclude cur_ words_ cword_; if [ "$1" = "-n" ]; then exclude=$2; shift 2; fi; __my_reassemble_comp_words_by_ref "$exclude"; cur_=${words_[cword_]}; while [ $# -gt 0 ]; do case "$1" in cur) cur=$cur_ ;; prev) prev=${words_[$cword_-1]} ;; words) words=("${words_[@]}") ;; cword) cword=$cword_ ;; esac; shift; done } As shown above, the function __perf_get_comp_words_by_ref is loaded and can work this time. Note that we do not change the original behavior when those functions are not preloaded before perf bash completion script runs. In this case, although the flag is set to "true", the code will still change it to "false" to use the function defined in perf-completion.sh. Signed-off-by: -
Yunlong Song authored
The bash completion does not support listing subsubcommands for 'perf trace <TAB>', so fix it. Example: Before this patch: $ perf trace <TAB> $ As shown above, the subsubcommands of perf trace does not come out. After this patch: $ perf trace <TAB> record As shown above, the subsubcommands of perf trace can come out now. Signed-off-by:
-
Yunlong Song authored
The bash completion does not support listing subsubcommands for 'perf timechart <TAB>', so fix it. Example: Before this patch: $ perf timechart <TAB> $ As shown above, the subsubcommands of perf timechart does not come out. After this patch: $ perf timechart <TAB> record As shown above, the subsubcommands of perf timechart can come out now. Signed-off-by:
-
Yunlong Song authored
The bash completion does not support listing subsubcommands for 'perf test <TAB>', so fix it. Example: Before this patch: $ perf test <TAB> $ As shown above, the subsubcommands of perf test does not come out. After this patch: $ perf test <TAB> list As shown above, the subsubcommands of perf test can come out now. Signed-off-by:
-
Yunlong Song authored
The bash completion does not support listing subsubcommands for 'perf script <TAB>', so fix it. Example: Before this patch: $ perf script <TAB> $ As shown above, the subsubcommands of perf script does not come out. After this patch: $ perf script <TAB> record report As shown above, the subsubcommands of perf script can come out now. Signed-off-by:
-
Yunlong Song authored
The bash completion does not support listing subsubcommands for 'perf help <TAB>', so fix it. Example: Before this patch: $ perf help <TAB> $ As shown above, the subsubcommands of perf help does not come out. After this patch: $ perf help <TAB> annotate buildid-cache data evlist inject kvm lock probe report script test top bench buildid-list diff help kmem list mem record sched stat timechart trace As shown above, the subsubcommands of perf help can come out now. Signed-off-by:
-
Yunlong Song authored
The bash completion does not support listing subsubcommands for 'perf data <TAB>', so fix it. Example: Before this patch: $ perf data <TAB> $ As shown above, the subsubcommands of perf data does not come out. After this patch: $ perf data <TAB> convert As shown above, the subsubcommands of perf data can come out now. Signed-off-by:
-
Yunlong Song authored
The bash completion does not support listing subcommands for 'perf --<long option> <TAB>'. Example: Before this patch: $ perf --debug <TAB> $ As shown above, the subcommands of perf does not come out. After this patch: $ perf --debug <TAB> annotate buildid-cache data evlist inject kvm lock probe report script test top version bench buildid-list diff help kmem list mem record sched stat timechart trace As shown above, the subcommands of perf can come out now. Signed-off-by:
-
Yunlong Song authored
The bash completion only supports -e rather than --event, so fix it. Example: Before this patch: $ perf record --event <TAB> $ As shown above, the events of record does not come out. After this patch: $ perf record --event <TAB> lignment-faults cpu/instructions/ L1-dcache-prefetch-misses node-prefetches uncore_rbox_0/qpi0_idle_filt/ branch-instructions cpu/mem-loads/ L1-dcache-store-misses node-prefetch-misses uncore_rbox_0/qpi1_date_response/ branch-load-misses cpu-migrations L1-dcache-stores node-store-misses uncore_rbox_0/qpi1_filt_send/ branch-loads dTLB-load-misses L1-icache-load-misses node-stores uncore_rbox_0/qpi1_idle_filt/ ... As shown above, the events of record can come out now. Signed-off-by:
-
Yunlong Song authored
The bash completion does not support listing events for 'perf kvm|kmem| mem|lock|sched record|stat|top -e <TAB>', where 'kvm|kmem|mem|lock|sched' are all subcommands of perf. Example: Before this patch: $ perf kvm record -e <TAB> $ As shown above, the events of record does not come out. After this patch: $ perf kvm record -e <TAB> alignment-faults cpu/instructions/ L1-dcache-prefetch-misses node-prefetches uncore_rbox_0/qpi0_idle_filt/ branch-instructions cpu/mem-loads/ L1-dcache-store-misses node-prefetch-misses uncore_rbox_0/qpi1_date_response/ branch-load-misses cpu-migrations L1-dcache-stores node-store-misses uncore_rbox_0/qpi1_filt_send/ branch-loads dTLB-load-misses L1-icache-load-misses node-stores uncore_rbox_0/qpi1_idle_filt/ ... As shown above, the events of record can come out now. Signed-off-by:
-
Yunlong Song authored
The bash completion gives wrong options for 'perf kvm|kmem|mem|lock| sched subsubcommand --<TAB>', where 'kvm|kmem|mem|lock|sched' are all subcommands of perf and 'subsubcommand' is a subcommand of 'kvm|kmem|mem |lock|sched'. In fact, the result incorrectly lists the bash completion of 'perf subcommand' rather than 'perf subcommand subsubcommand'. Example: Before this patch: $ perf kvm record --<TAB> --guest --guestkallsyms --guestmodules --guestmount --guestvmlinux --host --input --output --verbose As shown above, the result is the options of kvm rather than record. After this patch: $ perf kvm record --<TAB> --all-cpus --cgroup --delay --group --no-buildid --output --quiet --stat --uid --branch-any --count --event --intr-regs --no-buildid-cache --period --raw-samples --tid --verbose --branch-filter --cpu --filter --mmap-pages --no-inherit --per-thread --realtime --timestamp --weight --call-graph --data --freq --no-buffering --no-samples --pid --running-time --transaction As shown above, the result is exactly the options of record as we wished. Signed-off-by:
-
Yunlong Song authored
The bash completion does not support listing subsubcommands for 'perf kvm|kmem|mem|lock|sched --<long option> <TAB>', where 'kvm|kmem|mem| lock|sched' are all subcommands of perf. Example: Before this patch: $ perf kvm --verbose <TAB> $ As shown above, the subsubcommands of perf kvm does not come out. After this patch: $ perf kvm --verbose <TAB> buildid-list diff record report stat top As shown above, the subsubcommands of perf kvm can come out now. Signed-off-by:
-
Yunlong Song authored
The bash completion does not support listing options for 'perf kvm|kmem|mem|lock|sched --<TAB>', where 'kvm|kmem|mem|lock|sched' are all subcommands of perf. Example: Before this patch: $ perf kvm --<TAB> $ As shown above, the options of perf kvm does not come out. After this patch: $ perf kvm --<TAB> --alloc --caller --input --line --raw-ip --sort --verbose As shown above, the options of perf kvm can come out now. Signed-off-by:
-
H.J. Lu authored
Commit: c6e5e9fb ("perf tools: Fix building error in x86_64 when dwarf unwind is on") removed the definition of IS_X86_64 but not all places using it, with the consequence that perf-read-vdsox32 would not be built anymore, and the default lib install directory was 'lib' instead of 'lib64'. Also needs to go to v3.19. Signed-off-by:
H.J. Lu <hjl.tools@gmail.com> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Acked-by:
-
- 18 Mar, 2015 11 commits
-
-
Jiri Olsa authored
As it has nothing to do with features and won't be moved into tools/build. Signed-off-by:
-
Jiri Olsa authored
Preparing for feature checks separation, moving related stuff under 'FEATURE*' namespace. Signed-off-by:
-
Jiri Olsa authored
Preparing for feature checks separation, moving related stuff under 'feature*' namespace. Signed-off-by:
-
Jiri Olsa authored
Preparing for feature checks separation, moving related stuff under 'feature*' namespace. Signed-off-by:
-
Jiri Olsa authored
It only contains (FEATURE_TESTS - FEATURE_DISPLAY) tests to display the rest of the checks on 'make VF=1'. But we can actually compute this list, which is less confusing. Also renaming LIB_FEATURE_TESTS into FEATURE_DISPLAY, so it reflects what this variable actually does - display its tests status to user. Signed-off-by:
-
Jiri Olsa authored
Preparing for feature checks separation, moving related stuff under 'FEATURE*' namespace. Signed-off-by:
-
Jiri Olsa authored
It has no use, so we can directly use the value for CFLAGS. Signed-off-by:
-
Jiri Olsa authored
The test-all fails to build due to type in pthread-attr-setaffinity-np include. Signed-off-by:
-
Jiri Olsa authored
Following commit introduced features build dump: 443a7054 perf tools: Output feature detection's gcc output to a file Moving them into to have code more compact and renaming build dump files. For each feature 'test-X' new file 'test-X.make.output' is created and contains the build out. It's created in the same directory as the feature itself. Signed-off-by:
-
Jiri Olsa authored
Remove libbabeltrace check from default features set, because the requested version is not released yet in most distributions. We'll enable later. Calling libbabeltrace check manually via feature_check before $(feature-libbabeltrace) is used. Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <david.ahern@oracle.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-5n7mr6ugcwdbxk0n1z8uukaa@git.kernel.orgSigned-off-by:
-
Wang Nan authored
Commit b11db658 ("perf tools: Fix build error on ARCH=i386/x86_64/sparc64") uses sed on ARCH, which triggers a bug in sequence of sed expression, where 's/arm.*/arm/' will replace 'arm64' to 'arm', causes arm64 building failure. This patch prevent 'arm64' to be mached for 'arm.*' case. Signed-off-by:
-
- 17 Mar, 2015 2 commits
-
-
Arnaldo Carvalho de Melo authored
Instead of annotating just the top level hist_entry, allow instead annotating a map_symbol, i.e. the top level hist_entry or one of the callchains for which there were samples. Suggested-by:
Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/n/tip-k1zxj5564je9jei4yd15ouwn@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Since hist_entry__delete() nowadays doesn't actually frees anything that may be in use by the annotation code. Eventually we will solve this for good by reference counting struct symbol. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-uldtgljymtrkns0knpiso5op@git.kernel.orgSigned-off-by:
-
- 16 Mar, 2015 2 commits
-
-
Arnaldo Carvalho de Melo authored
Those asprintf return checks should be aligned with the other conditionals, fix it. Also add {} blocks to further clarify. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> echo Link: http://lkml.kernel.org/n/tip-`ranpwd -l 24`@git.kernel.org Link: http://lkml.kernel.org/n/tip-nqgs07jfphbkw67wja870d3r@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
No need to repeat some tests, skip annotation instead. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-6h6igrb81u4e6rwfmx7dv47n@git.kernel.orgSigned-off-by:
-
- 13 Mar, 2015 4 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: User visible changes: - Fix UI bug after zoom into thread/dso/symbol and another, after fold/unfold, in the TUI hists browser (He Kuang) - Fixes for 'perf probe' to better handle aliased symbols, for instance in glibc (Masami Hiramatsu, Namhyung Kim) - 'perf kmem' improvements and fixes: (Namhyung Kim) - Fix segfault when invalid sort key is given - Allow -v option - Fix alignment of slab result table - 'perf stat' improvements and fixes: (Andi Kleen) - Output running time and run/enabled ratio in CSV mode - Fix IPC and other formulas with -A - Always correctly indent ratio column - Add tracepoint events fields CTF conversion support to 'perf data' (Sebastian Andrzej Siewior) Infrastructure changes: - Output feature detection's gcc output to a file, to help in debugging (Arnaldo Carvalho de Melo) - Fix 'perf probe' compiles due to declarations using perf_probe_point (David Ahern) - Fix possible double free on error in 'perf probe' (He Kuang) - Remove superfluous thread->comm_set setting (Jiri Olsa) - Fix libbabeltrace detection (Jiri Olsa) - More work on separating ordered_events code out of perf_session (Arnaldo Carvalho de Melo) Signed-off-by:
-
Sebastian Andrzej Siewior authored
Adding support to convert tracepoint event fields into CTF event fields. We parse each tracepoint event for CTF conversion and add tracepoint fields as regular CTF event fields, so they appear in babeltrace output like: $ babeltrace ./ctf-data/ ... [09:02:00.950703057] (+?.?????????) sched:sched_stat_runtime: { }, { perf_ip = ... SNIP ... common_type = 298, common_flags = 1, \ common_preempt_count = 0, common_pid = 31813, comm = "perf", pid = 31813, runtime = 458800, vruntime = 52059858071 } ... Signed-off-by:Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by:
-
Namhyung Kim authored
Its table was a bit misaligned. Fix it. Before: # perf kmem stat --caller -l 10 ------------------------------------------------------------------------------------------------------ Callsite | Total_alloc/Per | Total_req/Per | Hit | Ping-pong | Frag ------------------------------------------------------------------------------------------------------ radeon_cs_parser_init.part.1+11a | 2080/260 | 1504/188 | 8 | 0 | 27.692% radeon_cs_parser_init.part.1+e1 | 384/96 | 288/72 | 4 | 0 | 25.000% radeon_cs_parser_init.part.1+93 | 128/32 | 96/24 | 4 | 0 | 25.000% load_elf_binary+a39 | 512/512 | 392/392 | 1 | 0 | 23.438% __alloc_skb+89 | 6144/877 | 4800/685 | 7 | 6 | 21.875% radeon_fence_emit+5c | 1152/192 | 912/152 | 6 | 0 | 20.833% radeon_cs_parser_relocs+ad | 8192/2048 | 6624/1656 | 4 | 0 | 19.141% radeon_sa_bo_new+78 | 1280/64 | 1120/56 | 20 | 0 | 12.500% load_elf_binary+2c4 | 32/32 | 28/28 | 1 | 0 | 12.500% anon_vma_prepare+101 | 576/72 | 512/64 | 8 | 0 | 11.111% ... | ... | ... | ... | ... | ... ------------------------------------------------------------------------------------------------------ After: --------------------------------------------------------------------------------------------------------- Callsite | Total_alloc/Per | Total_req/Per | Hit | Ping-pong | Frag --------------------------------------------------------------------------------------------------------- radeon_cs_parser_init.part.1+11a | 2080/260 | 1504/188 | 8 | 0 | 27.692% radeon_cs_parser_init.part.1+e1 | 384/96 | 288/72 | 4 | 0 | 25.000% radeon_cs_parser_init.part.1+93 | 128/32 | 96/24 | 4 | 0 | 25.000% load_elf_binary+a39 | 512/512 | 392/392 | 1 | 0 | 23.438% __alloc_skb+89 | 6144/877 | 4800/685 | 7 | 6 | 21.875% radeon_fence_emit+5c | 1152/192 | 912/152 | 6 | 0 | 20.833% radeon_cs_parser_relocs+ad | 8192/2048 | 6624/1656 | 4 | 0 | 19.141% radeon_sa_bo_new+78 | 1280/64 | 1120/56 | 20 | 0 | 12.500% load_elf_binary+2c4 | 32/32 | 28/28 | 1 | 0 | 12.500% anon_vma_prepare+101 | 576/72 | 512/64 | 8 | 0 | 11.111% ... | ... | ... | ... | ... | ... --------------------------------------------------------------------------------------------------------- Signed-off-by:
-
Namhyung Kim authored
Current perf kmem fails when -v option is used. As it's very useful for debugging, let's allow it. Signed-off-by:
-
