- 08 Sep, 2021 4 commits
-
-
Colin Ian King authored
There is a statement that is indented one character too deeply, clean this up. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210902215737.55570-1-colin.king@canonical.com
-
Matthew Auld authored
Since the object might still be active here, the shrink_all will simply ignore it, which blows up in the test, since the pages will still be there. Currently THP is disabled which should result in the test being skipped, but if we ever re-enable THP we might start seeing the failure. Fix this by forcing I915_SHRINK_ACTIVE. v2: Some machine in the shard runs doesn't seem to have any available swap when running this test. Try to handle this. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210906091729.2093312-1-matthew.auld@intel.com
-
Matthew Auld authored
If we need to mark the PDE as operating in 64K GTT mode, we should be paranoid and flush the extra writes, like we already do for the PTEs. On some platforms the clflush can apparently add the just the right amount of magical delay to force the GPU to see the updated entry. Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210903155317.1854012-1-matthew.auld@intel.com
-
Ayaz A Siddiqui authored
MOCS table of TGL/RKL has MOCS[1] set to L3_UC. While for other gen12 devices we need to set MOCS[1] as L3_WB, So adding a new MOCS table for other gen 12 devices eg. ADL. Fixes: cfbe5291 ("drm/i915/gt: Initialize unused MOCS entries with device specific values") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Ayaz A Siddiqui <ayaz.siddiqui@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> [mattrope: fix whitespace error] Signed-off-by:
-
- 07 Sep, 2021 1 commit
-
-
ravitejax authored
Removing force probe protection from ADLS platform. Did not observe warnings, errors, flickering or any visual defects while doing ordinary tasks like browsing and editing documents in a two monitor setup. For more info drm-tip idle run results : https://intel-gfx-ci.01.org/tree/drm-tip/bat-all.html? Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
ravitejax <ravitejax.goud.talla@intel.com> Reviewed-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210903182034.668467-1-ravitejax.gpud.talla@intel.com
-
- 06 Sep, 2021 11 commits
-
-
Daniel Vetter authored
The full audit is quite a bit of work: - i915_dpt has very simple lifetime (somehow we create a display pagetable vm per object, so its _very_ simple, there's only ever a single vma in there), and uses i915_vm_close(), which internally does a i915_vm_put(). No rcu. Aside: wtf is i915_dpt doing in the intel_display.c garbage collector as a new feature, instead of added as a separate file with some clean-ish interface. Also, i915_dpt unfortunately re-introduces some coding patterns from pre-dma_resv_lock conversion times. - i915_gem_proto_ctx is fully refcounted and no rcu, all protected by fpriv->proto_context_lock. - i915_gem_context is itself rcu protected, and that might leak to anything it points at. Before commit cf977e18 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Dec 2 11:21:40 2020 +0000 drm/i915/gem: Spring clean debugfs and commit db80a129 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Jan 18 11:08:54 2021 +0000 drm/i915/gem: Remove per-client stats from debugfs/i915_gem_objects we had a bunch of debugfs files that relied on rcu protecting everything, but those are gone now. The main one was removed even earlier with There doesn't seem to be anything left that's actually protecting stuff now that the ctx->vm itself is invariant. See commit ccbc1b97 Author: Jason Ekstrand <jason@jlekstrand.net> Date: Thu Jul 8 10:48:30 2021 -0500 drm/i915/gem: Don't allow changing the VM on running contexts (v4) Note that we drop the vm refcount before the final release of the gem context refcount, so this is all very dangerous even without rcu. Note that aside from later on creating new engines (a defunct feature) and debug output we're never looked at gem_ctx->vm for anything functional, hence why this is ok. Fingers crossed. Preceeding patches removed all vestiges of rcu use from gem_ctx->vm derferencing to make it clear it's really not used. The gem_ctx->rcu protection was introduced in commit a4e7ccda Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Oct 4 14:40:09 2019 +0100 drm/i915: Move context management under GEM The commit message is somewhat entertaining because it fails to mention this fact completely, and compensates that by an in-commit changelog entry that claims that ctx->vm is protected by ctx->mutex. Which was the case _before_ this commit, but no longer after it. - intel_context holds a full reference. Unfortunately intel_context is also rcu protected and the reference to the ->vm is dropped before the rcu barrier - only the kfree is delayed. So again we need to check whether that leaks anywhere on the intel_context->vm. RCU is only used to protect intel_context sitting on the breadcrumb lists, which don't look at the vm anywhere, so we are fine. Nothing else relies on rcu protection of intel_context and hence is fully protected by the kref refcount alone, which protects intel_context->vm in turn. The breadcrumbs rcu usage was added in commit c744d503 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Nov 26 14:04:06 2020 +0000 drm/i915/gt: Split the breadcrumb spinlock between global and contexts its parent commit added the intel_context rcu protection: commit 14d1eaf0 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Nov 26 14:04:05 2020 +0000 drm/i915/gt: Protect context lifetime with RCU given some credence to my claim that I've actually caught them all. - drm_i915_gem_object's shares_resv_from pointer has a full refcount to the dma_resv, which is a sub-refcount that's released after the final i915_vm_put() has been called. Safe. Aside: Maybe we should have a struct dma_resv_shared which is just dma_resv + kref as a stand-alone thing. It's a pretty useful pattern which other drivers might want to copy. For a bit more context see commit 4d8151ae Author: Thomas Hellström <thomas.hellstrom@linux.intel.com> Date: Tue Jun 1 09:46:41 2021 +0200 drm/i915: Don't free shared locks while shared - the fpriv->vm_xa was relying on rcu_read_lock for lookup, but that was updated in a prep patch too to just be a spinlock-protected lookup. - intel_gt->vm is set at driver load in intel_gt_init() and released in intel_gt_driver_release(). There seems to be some issue that in some error paths this is called twice, but otherwise no rcu to be found anywhere. This was added in the below commit, which unfortunately doesn't explain why this complication exists. commit e6ba7648 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Sat Dec 21 16:03:24 2019 +0000 drm/i915: Remove i915->kernel_context The proper fix most likely for this is to start using drmm_ at large scale, but that's also huge amounts of work. - i915_vma->vm is some real pain, because rcu is rcu protected, at least in the vma lookup in the context lookup cache in eb_lookup_vma(). This was added in commit 4ff4b44c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jun 16 15:05:16 2017 +0100 drm/i915: Store a direct lookup from object handle to vma This was changed to a radix tree from the hashtable in, but with the locking unchanged, in commit d1b48c1e Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 16 09:52:08 2017 +0100 drm/i915: Replace execbuf vma ht with an idr In commit 93159e12 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Mar 23 09:28:41 2020 +0000 drm/i915/gem: Avoid gem_context->mutex for simple vma lookup the locking was changed from dev->struct_mutex to rcu, which added the requirement to rcu protect i915_vma. Somehow this was missed in review (or I'm completely blind). Irrespective of all that the vma lookup cache rcu_read_lock grabs a full reference of the vma and the rcu doesn't leak further. So no impact on i915_address_space from that. I have not found any other rcu use for i915_vma, but given that it seems broken I also didn't bother to do a careful in-depth audit. Alltogether there's nothing left in-tree anymore which requires that a pointer deref to an i915_address_space is safe undre rcu_read_lock only. rcu protection of i915_address_space was introduced in commit b32fa811 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Jun 20 19:37:05 2019 +0100 drm/i915/gtt: Defer address space cleanup to an RCU worker by mixing up a bugfixing (i915_address_space needs to be released from a worker) with enabling rcu support. The commit message also seems somewhat confused, because it talks about cleanup of WC pages requiring sleep, while the code and linked bugzilla are about a requirement to take dev->struct_mutex (which yes sleeps but it's a much more specific problem). Since final kref_put can be called from pretty much anywhere (including hardirq context through the scheduler's i915_active cleanup) we need a worker here. Hence that part must be kept. Ideally all these reclaim workers should have some kind of integration with our shrinkers, but for some of these it's rather tricky. Anyway, that's a preexisting condition in the codeebase that we wont fix in this patch here. We also remove the rcu_barrier in ggtt_cleanup_hw added in commit 60a4233a Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Jul 29 14:24:12 2019 +0100 drm/i915: Flush the i915_vm_release before ggtt shutdown Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Jason Ekstrand <jason@jlekstrand.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210902142057.929669-11-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
We don't need the absolute speed of rcu for this. And i915_address_space in general dont need rcu protection anywhere else, after we've made gem contexts and engines a lot more immutable. Note that this semantically reverts commit aabbe344 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 30 19:03:25 2019 +0100 drm/i915: Use RCU for unlocked vm_idr lookup except we have the conversion from idr to xarray in between. v2: kref_get_unless_zero is no longer required (Maarten) Reviewed-by:
-
Daniel Vetter authored
It's been invariant since commit ccbc1b97 Author: Jason Ekstrand <jason@jlekstrand.net> Date: Thu Jul 8 10:48:30 2021 -0500 drm/i915/gem: Don't allow changing the VM on running contexts (v4) this just completes the deed. I've tried to split out prep work for more careful review as much as possible, this is what's left: - get_ppgtt gets simplified since we don't need to grab a temporary reference - we can rely on the temporary reference for the gem_ctx while we inspect the vm. The new vm_id still needs a full i915_vm_open ofc. This also removes the final caller of context_get_vm_rcu - A pile of selftests can now just look at ctx->vm instead of rcu_dereference_protected( , true) or similar things. - All callers of i915_gem_context_vm also disappear. - I've changed the hugepage selftest to set scrub_64K without any locking, because when we inspect that setting we're also not taking any locks either. It works because it's a selftests that's careful (single threaded gives you nice ordering) and not a live driver where races can happen from anywhere. These can only be split up further if we have some intermediate state with a bunch more rcu_dereference_protected(ctx->vm, true), just to shut up lockdep and sparse. The conversion to __rcu happened in commit a4e7ccda Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Oct 4 14:40:09 2019 +0100 drm/i915: Move context management under GEM Note that we're not breaking the actual bugfix in there: The real bugfix is pushing the i915_vm_relase onto a separate worker, to avoid locking inversion issues. The rcu conversion was just thrown in for entertainment value on top (no vm lookup isn't even close to anything that's a hotpath where removing the single spinlock can be measured). v2: Rebase over the change to move the i915_vm_put() into i915_gem_context_release(). v3: Trivial conflict against repainted shed. Reviewed-by: -
Daniel Vetter authored
Since commit ccbc1b97 Author: Jason Ekstrand <jason@jlekstrand.net> Date: Thu Jul 8 10:48:30 2021 -0500 drm/i915/gem: Don't allow changing the VM on running contexts (v4) the gem_ctx->vm can't change anymore. Plus we always set the intel_context->vm, so might as well use the helper we have for that. This makes it very clear that we always overwrite intel_context->vm for userspace contexts, since the default is gt->vm, which is explicitly reserved for kernel context use. It would be good to split things up a bit further and avoid any possibility for an accident where we run kernel stuff in userspace vm or the other way round. Reviewed-by:
-
Daniel Vetter authored
And use it anywhere we have open-coded checks for ctx->vm that really only check for full ppgtt. Plus for paranoia add a GEM_BUG_ON that checks it's really only set when we have full ppgtt, just in case. gem_context->vm is different since it's NULL in ggtt mode, unlike intel_context->vm or gt->vm, which is always set. v2: 0day found a testcase that I missed. v3: Repaint shed (Jon, Tvrtko) Reviewed-by:
-
Daniel Vetter authored
Consolidates the "which is the vm my execbuf runs in" code a bit. We do some get/put which isn't really required, but all the other users want the refcounting, and I figured doing a function just for this getparam to avoid 2 atomis is a bit much. Reviewed-by:
-
Daniel Vetter authored
The important part isn't so much that this does an rcu lookup - that's more an implementation detail, which will also be removed. The thing that makes this different from other functions is that it's gettting you the vm that batchbuffers will run in for that gem context, which is either a full ppgtt stored in gem->ctx, or the ggtt. We'll make more use of this function later on. Reviewed-by:
-
Daniel Vetter authored
Changing the vm from a finalized gem ctx is no longer possible, which means we don't have to check for that anymore. I was pondering whether to keep the check as a WARN_ON, but things go boom real bad real fast if the vm of a vma is wrong. Plus we'd need to also get the ggtt vm for !full-ppgtt platforms. Ditching it all seemed like a better idea. Reviewed-by:
-
Daniel Vetter authored
The comment added in commit b81dde71 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue May 21 22:11:29 2019 +0100 drm/i915: Allow userspace to clone contexts on creation and moved in commit 27dbae8f Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Nov 6 09:13:12 2019 +0000 drm/i915/gem: Safely acquire the ctx->vm when copying suggested that i915_address_space were at least intended to be managed through SLAB_TYPESAFE_BY_RCU: * This ppgtt may have be reallocated between * the read and the kref, and reassigned to a third * context. In order to avoid inadvertent sharing * of this ppgtt with that third context (and not * src), we have to confirm that we have the same * ppgtt after passing through the strong memory * barrier implied by a successful * kref_get_unless_zero(). But extensive git history search has not brough any such reuse to light. What has come to light though is that ever since commit 2850748e Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Oct 4 14:39:58 2019 +0100 drm/i915: Pull i915_vma_pin under the vm->mutex (yes this commit is earlier) the final i915_vma_put call has been moved from i915_gem_context_free (now called _release) to context_close, which means it's not actually safe anymore to access the ctx->vm pointer without lock helds, because it might disappear at any moment. Note that superficially things all still work, because the i915_address_space is RCU protected since commit b32fa811 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Jun 20 19:37:05 2019 +0100 drm/i915/gtt: Defer address space cleanup to an RCU worker except the very clever macro above (which is designed to protected against object reuse due to SLAB_TYPESAFE_BY_RCU or similar tricks) results in an endless loop if the refcount of the ctx->vm ever permanently drops to 0. Which it totally now can. Fix that by moving the final i915_vm_put to where it should be. Note that i915_gem_context is rcu protected, but _only_ the final kfree. This means anyone who chases a pointer to a gem ctx solely under the protection can pretty only call kref_get_unless_zero(). This seems to be pretty much the case, aside from a bunch of cases that consult the scheduling information without any further protection. Reviewed-by: -
Daniel Vetter authored
gem context refcounting is another exercise in least locking design it seems, where most things get destroyed upon context closure (which can race with anything really). Only the actual memory allocation and the locks survive while holding a reference. This tripped up Jason when reimplementing the single timeline feature in commit 00dae4d3 Author: Jason Ekstrand <jason@jlekstrand.net> Date: Thu Jul 8 10:48:12 2021 -0500 drm/i915: Implement SINGLE_TIMELINE with a syncobj (v4) We could fix the bug by holding ctx->mutex in execbuf and clear the pointer (again while holding the mutex) context_close, but it's cleaner to just make the context object actually invariant over its _entire_ lifetime. This way any other ioctl that's potentially racing, but holding a full reference, can still rely on ctx->syncobj being an immutable pointer. Which without this change, is not the case. Reviewed-by:
-
Daniel Vetter authored
The only reason for this really is the i915_gem_engines->fence callback engines_notify(), which exists purely as a fairly funky reference counting scheme for that. Otherwise all other callers are from process context, and generally fairly benign locking context. Unfortunately untangling that requires some major surgery, and we have a few i915_gem_context reference counting bugs that need fixing, and they blow in the current hardirq calling context, so we need a stop-gap measure. Put a FIXME comment in when this should be removable again. v2: Fix mock_context(), noticed by intel-gfx-ci. Acked-by:
-
- 03 Sep, 2021 5 commits
-
-
Sreedhar Telukuntla authored
Initialize the L3CC table as part of mocs initialization to program LNCFCMOCSx registers so that the mocs settings are available for selection for subsequent memory transactions in the driver load path. We need to keep L3CC initialization in intel_mocs_init_engine() also so that in execlists submission, these registers can be rewritten during engine reset. Reviewed-by:
Sreedhar Telukuntla <sreedhar.telukuntla@intel.com> Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210903092153.535736-6-ayaz.siddiqui@intel.com
-
Ayaz A Siddiqui authored
Historically we've initialized all undefined/reserved entries in a platform's MOCS table to the contents of table entry #1 (i.e., I915_MOCS_PTE). Going forward, we can't assume that table entry #1 will always contain suitable values to use for undefined/reserved table indices. We'll allow a platform-specific table index to be selected at table initialization time in these cases. This new mechanism to select L3 WB entry will be applicable for all the Gen12+ platforms except TGL and RKL. Since TGL and RLK are already in production so their mocs settings are intact to avoid ABI break. Reviewed-by:
-
Ayaz A Siddiqui authored
Blitter commands which do not have MOCS fields rely on cacheability of BlitterCacheControlRegister which was mapped to index 0 by default.Once we changed the MOCS value of index 0 to L3 WB, tests like gem_linear_blits started failing due to a change in cacheability from UC to WB. Program and place the BlitterCacheControlRegister in build_aux_regs(). Reviewed-by:
-
Ayaz A Siddiqui authored
Cache-control registers for Command Stream(CMD_CCTL) are used to set catchability for memory writes and reads outputted by Command Streamers on Gen12 onward platforms. These registers need to point un-cached(UC) MOCS index. Reviewed-by:
-
Ayaz A Siddiqui authored
Now there are lots of Command and registers that require mocs index programming. So propagating mocs_index from mocs to gt so that it can be used directly without having platform-specific checks. V2: Changed 'i915_mocs_index_gt' to anonymous structure. Cc: CQ Tang<cq.tang@intel.com> Reviewed-by:
-
- 02 Sep, 2021 1 commit
-
-
Thomas Hellström authored
Using the I915_MMAP_TYPE_FIXED mmap type requires the TTM backend, so for that mmap type, use __i915_gem_object_create_user() instead of i915_gem_object_create_internal(), as we really want to tests objects mmap-able by user-space. This also means that the out-of-space error happens at object creation and returns -ENXIO rather than -ENOSPC, so fix the code up to expect that on out-of-offset-space errors. Finally only use I915_MMAP_TYPE_FIXED for LMEM and SMEM for now if testing on LMEM-capable devices. For stolen LMEM, we still take the same path as for integrated, as that haven't been moved over to TTM yet, and user-space should not be able to create out of stolen LMEM anyway. v2: - Check the presence of the obj->ops->mmap_offset callback rather than hardcoding the supported mmap regions in can_mmap() (Maarten Lankhorst) Fixes: 7961c5b6 ("drm/i915: Add TTM offset argument to mmap.") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
- 31 Aug, 2021 1 commit
-
-
Daniele Ceraolo Spurio authored
The function is only used from within GEM_BUG_ON(), which is causing warnings with Wunneeded-internal-declaration in some builds. Since the function is a simple wrapper around a CT function, we can just call the CT function directly instead. Fixes: 1fb12c58 ("drm/i915/guc: skip disabling CTBs before sanitizing the GuC") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Matthew Brost <matthew.brost@intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210823163137.19770-1-daniele.ceraolospurio@intel.com
-
- 27 Aug, 2021 2 commits
-
-
Daniel Vetter authored
In commit 8e02cceb ("drm/i915: delete gpu reloc code") I deleted the gpu relocation code and the selftest include and enabling, but accidentally forgot about the selftest source code. Fix this oversight. Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Matt Roper authored
A recent restructuring of our context workaround list initialization added an early return for non-render engines; this caused us to potentially miss the wa_init_finish() call at the end of the function. The mistake is pretty harmless --- the only impact is that non-render engines on graphics version 12.50+ platforms we don't trim down the workaround list to reclaim some memory, and we don't print the usual "Initialized 1 context workaround" message in dmesg. Let's change the early return to a jump down to the wa_init_finish() call at the bottom of the function. Reported-by:
Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Fixes: 9e9dfd08 ("drm/i915/dg2: Maintain backward-compatible nested batch behavior") Signed-off-by:
-
- 26 Aug, 2021 1 commit
-
-
Jani Nikula authored
Follow the usual naming conventions. While at it, fix i915_pci.h SPDX license comment format and add header include guards. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210825150623.28980-1-jani.nikula@intel.com
-
- 25 Aug, 2021 4 commits
-
-
Thomas Hellström authored
The buffer object argument to ttm_move_memcpy was only used to determine whether the destination memory should be cleared only or whether we should copy data. Replace it with a "clear" bool, and update the callers. The intention here is to be able to use ttm_move_memcpy() async under a dma-fence as a fallback if an accelerated blit fails in a security- critical path where data might leak if the blit is not properly performed. For that purpose the bo is an unsuitable argument since its relevant members might already have changed at call time. Finally, update the ttm_move_memcpy kerneldoc that seems to have ended up with a stale version. Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20210813144331.372957-3-thomas.hellstrom@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20210813144331.372957-3-thomas.hellstrom@linux.intel.com
-
Thomas Hellström authored
In order to make the code a bit more readable and to facilitate async memcpy moves, reorganize the move code a little. Determine at an early stage whether to copy or to clear. v2: - Don't set up the memcpy iterators unless we are actually going to memcpy. Signed-off-by:
-
Akeem G Abodunrin authored
New LRI register offsets were introduced for DG2, this patch adds those extra registers, and create new register table for setting offsets to compare with HW generated context image - especially for gt_lrc test. Also updates general purpose register with scratch offset for DG2, in order to use it for live_lrc_fixed selftest. Cc: Chris P Wilson <chris.p.wilson@intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by:
Caz Yokoyama <caz.yokoyama@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210805163647.801064-8-matthew.d.roper@intel.com
-
Matthew Brost authored
Like in the case of several other selftests, generating lots of requests in a loop takes a bit longer with GuC submission. Increase a timeout in i915_gem_contexts selftest to take this into account. Signed-off-by:
-
- 24 Aug, 2021 2 commits
-
-
Ville Syrjälä authored
Use NULL where appropriate. drivers/gpu/drm/i915/gt/intel_ring_submission.c:1210:24: warning: Using plain integer as NULL pointer Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210712161815.24776-2-ville.syrjala@linux.intel.comReviewed-by:
-
Nathan Chancellor authored
Clang warns: In file included from drivers/gpu/drm/i915/gt/intel_reset.c:1514: drivers/gpu/drm/i915/gt/selftest_hangcheck.c:465:62: warning: variable 'err' is uninitialized when used here [-Wuninitialized] pr_err("[%s] Create context failed: %d!\n", engine->name, err); ^~~ ... drivers/gpu/drm/i915/gt/selftest_hangcheck.c:580:62: warning: variable 'err' is uninitialized when used here [-Wuninitialized] pr_err("[%s] Create context failed: %d!\n", engine->name, err); ^~~ ... 2 warnings generated. This appears to be a copy and paste issue. Use ce directly using the %pe specifier to pretty print the error code so that err is not used uninitialized in these functions. Fixes: 3a7b7266 ("drm/i915/selftest: Bump selftest timeouts for hangcheck") Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
- 20 Aug, 2021 5 commits
-
-
Lucas De Marchi authored
This was added in commit 05e26584 ("drm/i915/dg1: add initial DG-1 definitions") so we could continue to add support for DG1 without risk to expose a broken UAPI. Now that we added DG1 to the PCI ID list i915 may bind to, remove the leftover. Fixes: d5ef86b3 ("drm/i915: Add pci ids and uapi for DG1") Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
-
Dan Carpenter authored
If the intel_engine_create_pinned_context() function returns an error pointer, then dereferencing "ce" will Oops. Use "vm" instead of "ce->vm". Fixes: cf586021 ("drm/i915/gt: Pipelined page migration") Signed-off-by:
-
Matthew Auld authored
This should give a more complete view of the various bits of internal resource manager state, for device local-memory. v2(Thomas): - Move the region printing into a nice helper Signed-off-by:
-
Matthew Auld authored
Implement the debug hook for the buddy resource manager. For this we want to print out the status of the memory manager, including how much memory is still allocatable, what page sizes we have etc. This will be triggered when TTM is unable to fulfil an allocation request for device local-memory. v2(Thomas): - s/MB/MiB - s/KB/KiB Signed-off-by: -
Thomas Hellström authored
It's only used by the for_i915_gem_ww() macro and we can use the (typically) on-stack _err variable in its place. v2: - Don't clear the _err variable when entering the loop (Matthew Auld, Maarten Lankhorst). - Use parentheses around the _err macro argument. - Fix up comment. Cc: Matthew Auld <matthew.william.auld@gmail.com> Suggested-by:
-
- 19 Aug, 2021 1 commit
-
-
Matthew Brost authored
A small race exists between intel_gt_retire_requests_timeout and intel_timeline_exit which could result in the syncmap not getting free'd. Rather than work to hard to seal this race, simply cleanup the syncmap on fini. unreferenced object 0xffff88813bc53b18 (size 96): comm "gem_close_race", pid 5410, jiffies 4294917818 (age 1105.600s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 0a 00 00 00 ................ 00 00 00 00 00 00 00 00 6b 6b 6b 6b 06 00 00 00 ........kkkk.... backtrace: [<00000000120b863a>] __sync_alloc_leaf+0x1e/0x40 [i915] [<00000000042f6959>] __sync_set+0x1bb/0x240 [i915] [<0000000090f0e90f>] i915_request_await_dma_fence+0x1c7/0x400 [i915] [<0000000056a48219>] i915_request_await_object+0x222/0x360 [i915] [<00000000aaac4ee3>] i915_gem_do_execbuffer+0x1bd0/0x2250 [i915] [<000000003c9d830f>] i915_gem_execbuffer2_ioctl+0x405/0xce0 [i915] [<00000000fd7a8e68>] drm_ioctl_kernel+0xb0/0xf0 [drm] [<00000000e721ee87>] drm_ioctl+0x305/0x3c0 [drm] [<000000008b0d8986>] __x64_sys_ioctl+0x71/0xb0 [<0000000076c362a4>] do_syscall_64+0x33/0x80 [<00000000eb7a4831>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
-
- 18 Aug, 2021 2 commits
-
-
Matt Roper authored
For tgl+, the per-context setting of MI_MODE[12] determines whether the bits of a nested MI_BATCH_BUFFER_START instruction should be interpreted in the traditional manner or whether they should instead use a new tgl+ meaning that breaks backward compatibility, but allows nesting into 3rd-level batchbuffers. For previous platforms, the hardware default for this register bit is to maintain backward-compatible behavior unless a context intentionally opts into the new behavior; however Xe_HPG flips the hardware default behavior. From a SW perspective, we want to maintain the backward-compatible behavior for userspace, so we'll apply a fake workaround to set it back to the legacy behavior on platforms where the hardware default is to break compatibility. At the moment there is no Linux userspace that utilizes third-level batchbuffers, so this will avoid userspace from needing to make any changes. using the legacy meaning is the correct thing to do. If/when we have userspace consumers that want to utilize third-level batch nesting, we can provide a context parameter to allow them to opt-in. Bspec: 45974, 45718 Cc: John Harrison <John.C.Harrison@Intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com>
-
Kees Cook authored
The kernel builds with -Werror=designated-init, and __designated_init is used by CONFIG_GCC_PLUGIN_RANDSTRUCT for automatically selected (all function pointer) structures. Include the field names in the init/exit table. Avoids warnings like: drivers/gpu/drm/i915/i915_module.c:59:4: error: positional initialization of field in 'struct' declared with 'designated_init' attribute [-Werror=designated-init] Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: David Airlie <airlied@linux.ie> Cc: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Fixes: a04ea6ae ("drm/i915: Use a table for i915_init/exit (v2)") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
