- 25 Aug, 2017 40 commits
-
-
Bart Van Assche authored
Before scsi_prep_fn() calls the ULP .init_command() callback function it stores the SCSI command pointer in request.special. This means that the SCpnt = rq->special assignments in the sd and sr drivers assign a pointer to itself. Hence convert these two assignment statements into warning statements. Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Bart Van Assche authored
Since commit e9c787e6 ("scsi: allocate scsi_cmnd structures as part of struct request") struct request and struct scsi_cmnd are adjacent. This means that there is now an alternative to reading req->special to convert a pointer to a prepared request into a SCSI command pointer, namely by using blk_mq_rq_to_pdu(). Make this change where appropriate. Although this patch does not change any functionality, it slightly improves performance and slightly improves readability. Signed-off-by:
-
Bart Van Assche authored
Rename several functions to make it easy to see which queue type a function is intended for. Signed-off-by:
-
Bart Van Assche authored
This patch avoids that smatch reports the following warning: drivers/scsi/scsi_sysfs.c:117: check_set() error: strncmp() '"-"' too small (2 vs 20) Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Bart Van Assche authored
The conclusion of a recent discussion about the new warnings reported by gcc 7 is that the new warnings reported when building with W=1 should be suppressed. However, gcc 7 still warns about fall-through in switch statements when building with W=1. Suppress these warnings by annotating the SCSI core properly. See also Linus Torvalds, Lots of new warnings with gcc-7.1.1, 11 July 2017 (https://www.mail-archive.com/linux-media@vger.kernel.org/msg115428.html). References: commit bd664f6b ("disable new gcc-7.1.1 warnings for now") Signed-off-by:
-
Bart Van Assche authored
This patch avoids that smatch reports the following: drivers/scsi/scsi_sysfs.c:506 scsi_bus_uevent() warn: argument 3 to %02x specifier has type 'char' drivers/scsi/scsi_sysfs.c:872 sdev_show_modalias() warn: argument 4 to %02x specifier has type 'char' Signed-off-by:
-
Bart Van Assche authored
Commit e9c787e6 ("scsi: allocate scsi_cmnd structures as part of struct request") removed the scsi_get_command() function. Hence also remove the declaration of that function. Signed-off-by:
-
Zang Leigang authored
Signed-off-by:
Zang Leigang <zangleigang@hisilicon.com> Signed-off-by:
-
Dick Kennedy authored
Update driver version to 11.4.0.3 Signed-off-by:
Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
-
Maurizio Lombardi authored
cc1: warnings being treated as errors drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_get_wwpn': drivers/scsi/lpfc/lpfc_init.c:3253: error: integer constant is too large for 'long' type Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
James Smart authored
Add Buffer to buffer credit recovery support to the driver. This is a negotiated feature with the peer that allows for both sides to detect dropped RRDY's and FC Frames and recover credit. Signed-off-by:
-
James Smart authored
Change hw queue binding messages to info - not error. Signed-off-by:
-
Dick Kennedy authored
Port issue was fixed, the hbacmd reset would take more than 8 minutes to complete. There were conflicting NVME SGL posting/reposting responsibilities between lpfc_online()/lpfc_sli4_hba_setup() and lpfc_nvme_create_localport(). The lpfc_online() causes a REPOST on existing NVME SGLs which is not released during the fc port reset. However, lpfc_nvme_create_localport() wants to allocate new NVME buffers and post them. Both cancelled out each other which had a side effect of hosing the mailbox handling that was used to remove the sgl lists - causing multiple 60s mbx timeouts. Fix by preserving all SGL lists over the fc port reset. Signed-off-by:
-
Dick Kennedy authored
The nonrecovery occurred because the lpfc nvme initiator function did not reestablish its localport creation with the nvme host transport in lpfc_oneline. Because of that, an NVME rport binding could not take place. Corrected by recreating the localport in the adapter reset recovery routine. Signed-off-by:
-
Dick Kennedy authored
If the nvmet_fc transport breaks an io into multiple sequences, the driver will improperly set the relative offset on the 2nd through N sequences. Correct by properly formatting the hw cmd so the relative offset is picked up from the hw cmd. Signed-off-by:
-
Dick Kennedy authored
Various oops including cpu LOCKUPs were seen. For asynchronously received ius where the driver must assign exchange resources, the resources were on a single get (free) list and put list (finished, waiting to be put on get list). As all cpus are sharing the lists, an interrupt for a receive frame may have to wait for all the other cpus to place their done work onto the put list before it can acquire the lock to pull from the list. Fix by breaking the resource lists into per-cpu lists or at least more than 1 list with cpu's sharing the lists). A cpu would allocate from the free list for its own cpu, and put its done work on the its own put list - avoiding the contention. As cpu load may vary, when empty, a cpu may grab from another cpu, thereby changing resource distribution. But searching for a resource only occurs on 1 or a few cpus until a single resource can be allocated. if the condition reoccurs, it starts looking at a different cpu. Signed-off-by:
-
Dick Kennedy authored
Various oops being seen on being in the ISR too long and cpu lockups, when under heavy load. The amount of work being posted off of completion queues kept the ISR running almost all the time Correct the issue by limiting the amount of work per iteration. [mkp: typo] Signed-off-by:
-
Dick Kennedy authored
When using fabric-assigned WWNs, the switch doesn't like copy of the FLOGI payload, which includes valid VVL bits, to be used as the FDISC payload. Rather than wait for corrected switch firmware, ensure the VVL bits are marked invalid on FDISCs. [mkp: typo] Signed-off-by:
-
Dick Kennedy authored
A race condition was found whereby the initiator would receive the RSCN for a new NVME device before it had a chance to register its FC4 support with the fabric. Thus, when queried by the initiator, it would see that the target supported FC-NVME. Corrected by making the assumption that the target always supports FC-NVME thus a PRLI is sent. It's ok for the target to reject it. Signed-off-by:
-
Dick Kennedy authored
In adapter reset tests, an oops was seen with a NULL pointer in lpfc_free_rq_buffer+0x20/0x60 The driver is failing to properly repost the nvmet sgl list when recovering from the reset. Thus the driver eventually trys to walk an errant buffer list. Corrected the sgl buffer recovery as well as strengthening the initialization of the bufferlist. Signed-off-by:
-
Dick Kennedy authored
After lip, the driver sometimes would have two rports for the same device, allowing the namespaces to be duplicated by nvme. In lpfc_plogi_confirm_nport() the driver was not swapping the nrport maintained by the ndlp's undergoing address swapping. This allowed the 2nd rport to sneak in as it was considered a separate device. This patch adds the fixes to Swap the nrport in each ndlp and take care of the reference counts on the ndlps similar to FCP rports. Signed-off-by:
-
Dick Kennedy authored
After link bounce in a NVME Pt2Pt config, the driver managed to map the same nport twice, resulting in multiple device nodes for the same namespace. In Pt2Pt, the driver must send PRLI's for both (scsi) FCP and NVME rather than using fabric aids. The driver was inconsistent on handling various PRLI completions, especially rejects, which had reject codes cross the different protocol PRLI completions. Fixed to perform the following: if nvmet mode (fc port can only be a nvme target) - rejects all unsolicitly FCP PRLI's. Never issues a FCP PRLI. The multiple protocol PRLI's are sent simultaneously. However, driver will now only state transition after both PRLI's are complete. New flags were added to aid tracking the responses from the different PRLI's. Signed-off-by:
-
Dick Kennedy authored
Modify driver return error codes to align with host nvme transport. Driver isn't returning Exxx error codes to properly reflect out of resource or connectivity conditions (-EBUSY), yet there were hard error conditions returning -EBUSY. Ensure the following situations return the proper return code: - Temporary failures or temporary resource availability: -EBUSY - Connectivity issues: -ENODEV All others are treated as hard errors and return an -Exxx value that indicates the type of error. Also, lpfc_sli4_issue_wqe() was modified to not translate error from -Exxx to WQE state. This allows lpfc_nvme_fcp_io_submit() routine to just return whatever -E value was returned from other routines. Signed-off-by:
-
Dick Kennedy authored
Transitioned some informational discovery messages to now always be displayed when log_verbose is set. Signed-off-by:
-
Dick Kennedy authored
lpfc oops when it discovers a NVME target but is configured for SCSI only operation. Oops is in lpfc_nvme_register_port+0x33/0x300. The localport is not valid so it should not have been referenced. Added validity check for localport Signed-off-by:
-
Dick Kennedy authored
When the switch blade is pulled out then plugged back in, the driver does not issue a PLOGI to the target When the switch blade is pulled out, it does not reset the link. The driver ends up issuing a LOGO to the target, and finally sees devloss. Since the driver believes that a LOGO is outstanding, it does not issue a PLOGI to the target upon link up Correct by placing the ndlp in UNUSED state When devloss happens in LOGO_ISSUE state. Signed-off-by:
-
Dick Kennedy authored
The driver does not discover targets when in loop mode. The NLP type is correctly getting set when a fabric connection is detected but, not for loop. The unknown NLP type means that the driver does not issue a PRLI when in loop topology. Thus target discovery fails. Fix by checking the topology during discovery. If it is loop, set the NLP FC4 type to FCP. Signed-off-by:
-
Dick Kennedy authored
Message "0271 Illegal State Transition: node" seen in logs, all luns are unuseable for that target. A window exists in the rcv_plogi path where if the state is plogi issue but the driver has not issued a plogi, then two reglogins will be sent for the same RPI. The first one to complete will advance the state to prli issue the second one will be detected as an illegal state, and leave the node in an unusable state. Correct the completion routine for the PLOGI ACC that detects the state change when the driver starts discovery on the node again and drop the REGLOGIN mailbox command. Signed-off-by:
-
himanshu.madhani@cavium.com authored
Signed-off-by:
Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by:
-
Sawan Chandak authored
If there are IO's running and host reset or chip reset is triggered, IO's can fail due to rport time out. During chip reset recovery process, driver notifies the transport layer that remote port no longer exist, by calling fc_remote_port_delete(). When this function is called, it actually delays deletion by "blocking" it. It sets the remote port state to "FC_PORTSTATE_BLOCKED" and sets FC_RPORT_DEVLOSS_PENDING. When driver tries to abort the command by calling its abort handler function, abort handler will wait until remote port state is blocked state or wait for dev_loss_tmo time. Due to this blocking, rport times out and results in an IO failure. This patch adds a check for any active reset process before calling abort handler function. [mkp: typo] Signed-off-by:
Sawan Chandak <sawan.chandak@cavium.com> Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by:
-
Joe Carnuccio authored
If queue count is zero while reading FW dump template, for entry T263/T274, skip capturing those entries during FW dump capture. Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Quinn Tran authored
When RSCN is delivered for specific remote port. Use ADISC to verify the session is still valid or not. Signed-off-by:
Quinn Tran <quinn.tran@cavium.com> Signed-off-by:
-
Michael Hernandez authored
ql2xmaxqdepth is the module parameter that seeds the per target queue depth in the Scsi midlayer (sdev->queue_depth). Performance testing revealed that increasing this value would improve IOPS numbers under certain workloads. Signed-off-by:
Michael Hernandez <michael.hernandez@cavium.com> Signed-off-by:
-
himanshu.madhani@cavium.com authored
Signed-off-by:
-
Quinn Tran authored
When we tear down the NPIV host configuration in target mode, the qla_tgt struct was left dangling on the global list. This patch cleans up link list and frees memory. Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
-
Sawan Chandak authored
Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
-
Joe Carnuccio authored
Signed-off-by:
-
