Merge tag 'asoc-fix-v5.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.16

This is a relatively large set of driver specific changes so it may make
sense to hold off to v5.17, though picking some over might be good.
It's a combination of new device IDs and fixes for various driver
specific things which are all small and of the usual "really bad if
you're running into them" level, especially the Tegra ones.

There is a HP ProBook which using ALC236 codec and need the
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and
micmute LED work.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211214164156.49711-1-jeremy.szu@canonical.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

The out-of-tree vendor driver uses the following approach to set the
AIU_I2S_MISC register:
1) write AIU_MEM_I2S_START_PTR and AIU_MEM_I2S_RD_PTR
2) configure AIU_I2S_MUTE_SWAP[15:0]
3) write AIU_MEM_I2S_END_PTR
4) set AIU_I2S_MISC[2] to 1 (documented as: "put I2S interface in hold
   mode")
5) set AIU_I2S_MISC[4] to 1 (depending on the driver revision it always
   stays at 1 while for older drivers this bit is unset in step 4)
6) set AIU_I2S_MISC[2] to 0
7) write AIU_MEM_I2S_MASKS
8) toggle AIU_MEM_I2S_CONTROL[0]
9) toggle AIU_MEM_I2S_BUF_CNTL[0]

Move setting the AIU_I2S_MISC[2] bit to aiu_fifo_i2s_hw_params() so it
resembles the flow in the vendor kernel more closely. While here also
configure AIU_I2S_MISC[4] (documented as: "force each audio data to
left or right according to the bit attached with the audio data")
similar to how the vendor driver does this. This fixes the infamous and
long-standing "machine gun noise" issue (a buffer underrun issue).

Fixes: 6ae9ca9c ("ASoC: meson: aiu: add i2s and spdif support")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Reported-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Tested-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211206210804.2512999-3-martin.blumenstingl@googlemail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The FIFO registers which take an DMA-able address are only 32-bit wide
on AIU. Add dma_coerce_mask_and_coherent() to make the DMA core aware of
this limitation.

Fixes: 6ae9ca9c ("ASoC: meson: aiu: add i2s and spdif support")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20211206210804.2512999-2-martin.blumenstingl@googlemail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Although the codec advertises support for 176.4 and 192 ksps, without
this fix setting those sample rates fails with EINVAL at hw_params time.
Signed-off-by: Martin Povišer <povik@protonmail.com>
Link: https://lore.kernel.org/r/20211206224529.74656-1-povik@protonmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some powers were changed during the jack insert detection
and clk's enable/disable in CCF.
If in parallel, the influence has a chance to detect
the wrong jack type, so add a lock.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211214105033.471-1-derek.fang@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Adds a new "alc285-hp-amp-init" model that can be used to apply the ALC285
HP speaker amplifier initialization fixup to devices that are not already
known by passing "hda_model=alc285-hp-amp-init" to the
snd-sof-intel-hda-common module or "model=alc285-hp-amp-init" to the
snd-hda-intel module, depending on which is being used.
Signed-off-by: Bradley Scott <bscott@teksavvy.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211213162246.506838-1-bscott@teksavvy.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

HP ZBook 15 G6 (SSID 103c:860f) needs the same speaker amplifier
initialization as used on several other HP laptops using ALC285.
Signed-off-by: Bradley Scott <Bradley.Scott@zebra.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211213154938.503201-1-Bradley.Scott@zebra.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

UCM of Acer Chromebook (Nyan) uses a different name for the headphones
jack. The name was changed during unification of the machine drivers and
UCM fails now to load because of that. Restore the old jack name.

Cc: <stable@vger.kernel.org>
Fixes: cc8f70f5 ("ASoC: tegra: Unify ASoC machine drivers")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211211231146.6137-2-digetx@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

UCM of Acer Chromebook (Nyan) uses DAPM switches of headphones and mic
jack. These switches were lost by accident during unification of the
machine drivers, restore them.

Cc: <stable@vger.kernel.org>
Fixes: cc8f70f5 ("ASoC: tegra: Unify ASoC machine drivers")
Reported-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Tested-by: Thomas Graichen <thomas.graichen@gmail.com> # T124 Nyan Big
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20211211231146.6137-1-digetx@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

kstrdup() can return NULL, it is better to check the return value of it.
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/tencent_094816F3522E0DC704056C789352EBBF0606@qq.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Static analysis with scan-build has found an assignment to vp2 that is
never used. It seems that the check on vp->state > 0 should be actually
on vp2->state instead. Fix this.

This dates back to 2002, I found the offending commit from the git
history git://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git,
commit 91e39521 ("[PATCH] ALSA patch for 2.5.4")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211212172025.470367-1-colin.i.king@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Lenovo ALC897 platform had headset Mic.
This patch enable supported headset Mic.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/baab2c2536cb4cc18677a862c6f6d840@realtek.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v5.16-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.16

A relatively large collection of updates, the size is increased quite a
bit by there being some repetitive changes for similar issues that occur
multiple times with both notifying control value changes and runtime PM.

The Rockchip update looks at first glance like a cleanup but fixes
instantiation of the hardware on some systems.

Add a PCI DID for a variant of Intel AlderLake-P.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211203171542.1021399-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add PCI DID for Intel AlderLake-N.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20211203171542.1021399-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Olivia Mackintosh has posted to alsa-devel reporting that
there's a potential bug that could break mixer quirks for Pioneer
devices introduced by 6d277881
"ALSA: usb-audio: Add support for the Pioneer DJM 750MK2
Mixer/Soundcard".

This happened because the DJM 750 MK2 was added last to the Pioneer DJM
device table index and defined as 0x4 but was added to snd_djm_devices[]
just after the DJM 750 (MK1) entry instead of last, after the DJM 900
NXS2. This escaped review.

To prevent that from ever happening again, Takashi Iwai suggested to use
C99 array designators in snd_djm_devices[] instead of simply reordering
the entries.

Fixes: 6d277881 ("ALSA: usb-audio: Add support for the Pioneer DJM 750MK2")
Reported-by: Olivia Mackintosh <livvy@base.nu>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Geraldo Nascimento <geraldogabriel@gmail.com>
Link: https://lore.kernel.org/r/Yau46FDzoql0SNnW@gedaySigned-off-by: Takashi Iwai <tiwai@suse.de>

This fixes the SND_PCI_QUIRK(...) of the TongFang PHxTxX1 barebone. This
fixes the issue of sound not working after s3 suspend.

When waking up from s3 suspend the Coef 0x10 is set to 0x0220 instead of
0x0020. Setting the value manually makes the sound work again. This patch
does this automatically.

While being on it, I also fixed the comment formatting of the quirk and
shortened variable and function names.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Fixes: dd6dd6e3 ("ALSA: hda/realtek: Add quirk for TongFang PHxTxX1")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211202165010.876431-1-wse@tuxedocomputers.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

When control_compat.c:copy_ctl_value_to_user() is used, by
ctl_elem_read_user() & ctl_elem_write_user(), it must also copy back the
snd_ctl_elem_id value that may have been updated (filled in) by the call
to snd_ctl_elem_read/snd_ctl_elem_write().

This matches the functionality provided by snd_ctl_elem_read_user() and
snd_ctl_elem_write_user(), via snd_ctl_build_ioff().

Without this, and without making additional calls to snd_ctl_info()
which are unnecessary when using the non-compat calls, a userspace
application will not know the numid value for the element and
consequently will not be able to use the poll/read interface on the
control file to determine which elements have updates.
Signed-off-by: Alan Young <consult.awy@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211202150607.543389-1-consult.awy@gmail.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

A couple of calls in snd_pcm_oss_change_params_locked() ignore the
possible errors.  Catch those errors and abort the operation for
avoiding further problems.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211201073606.11660-4-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

Set the practical limit to the period size (the fragment shift in OSS)
instead of a full 31bit; a too large value could lead to the exhaust
of memory as we allocate temporary buffers of the period size, too.

As of this patch, we set to 16MB limit, which should cover all use
cases.

Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com
Reported-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.alibaba.com
Link: https://lore.kernel.org/r/20211201073606.11660-3-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

The period size calculation in OSS layer may receive a negative value
as an error, but the code there assumes only the positive values and
handle them with size_t.  Due to that, a too big value may be passed
to the lower layers.

This patch changes the code to handle with ssize_t and adds the proper
error checks appropriately.

Reported-by: syzbot+bb348e9f9a954d42746f@syzkaller.appspotmail.com
Reported-by: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1638270978-42412-1-git-send-email-cuibixuan@linux.alibaba.com
Link: https://lore.kernel.org/r/20211201073606.11660-2-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>

wsa881x_set_port() and wsa881x_put_pa_gain() currently returns zero eventhough
it changes the value. Fix this, so that change notifications are sent
correctly.

Fixes: a0aab9e1 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130160507.22180-5-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

wcd934x_compander_set() currently returns zero eventhough it changes the value.
Fix this, so that change notifications are sent correctly.

Fixes: 1cde8b82 ("ASoC: wcd934x: add basic controls")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130160507.22180-4-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Currently each channel is added as list to dai channel list, however
there is danger of adding same channel to multiple dai channel list
which endups corrupting the other list where its already added.

This patch ensures that the channel is actually free before adding to
the dai channel list and also ensures that the channel is on the list
before deleting it.

This check was missing previously, and we did not hit this issue as
we were testing very simple usecases with sequence of amixer commands.

Fixes: a70d9245 ("ASoC: wcd934x: add capture dapm widgets")
Fixes: dd9eb19b ("ASoC: wcd934x: add playback dapm widgets")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130160507.22180-2-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

msm_routing_put_audio_mixer() can return incorrect value in various scenarios.

scenario 1:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0

return value is 0 instead of 1 eventhough value was changed

scenario 2:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 1

return value is 1 instead of 0 eventhough the value was not changed

scenario 3:
amixer cset iface=MIXER,name='SLIMBUS_0_RX Audio Mixer MultiMedia1' 0
return value is 1 instead of 0 eventhough the value was not changed

Fix this by adding checks, so that change notifications are sent correctly.

Fixes: e3a33673 ("ASoC: qdsp6: q6routing: Add q6routing driver")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20211130163110.5628-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Keep the HDA_CODEC_ENTRY entries sorted by the codec VID. ADL-P
is the only misplaced Intel HDMI codec.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211130124732.696896-2-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Add HD Audio PCI ID and HDMI codec vendor ID for Intel DG2.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211130124732.696896-1-kai.vehmanen@linux.intel.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

On the latest Lenovo Thinkstation laptops, we often experience the
speaker failure after rebooting, check the dmesg, we could see:
 sof-audio-pci-intel-tgl 0000:00:1f.3: codec #0 probe error, ret: -5

The analogue codec on the machine is ALC287, then we designed a
testcase to reboot and check the codec probing result repeatedly, we
found the analogue codec probing always failed at least once within
several minutes to several hours (roughly 1 reboot per min). This
issue happens on all laptops of this Thinkstation model, but with
legacy HDA driver, we couldn't reproduce this issue on those laptops.
And so far, this issue is not reproduced on machines which don't
belong to this model.

We tried to make the hda_dsp_ctrl_init_chip() same as
hda_intel_init_chip() which is the controller init routine in the
legacy HDA driver, but it didn't help.

We found when issue happens, the resp is -1, and if we let driver
re-run send_cmd() and get_response(), it will get the correct response
10ec0287, then driver continues the rest work, finally boot to the
desktop and all audio function work well.

Here adding codec probing retries to 3 times, it could fix the issue
on this Thinkstation model, and it doesn't bring impact to other
machines.
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211130090606.529348-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The "index" is potentially used without being initialized on the error
path.

Fixes: fc329c1d ("ASoC: amd: add platform devices for acp6x pdm driver and dmic driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211130125633.GA24941@kiliSigned-off-by: Mark Brown <broonie@kernel.org>

Previously, the DAI template was used directly, which lead to
fun bugs such as "why is my channels_max changing?" when one
instantiated more than one i2s_tdm IP block in a device tree.

This change makes it so that we instead duplicate the template
struct, and then use that.

Fixes: 081068fd ("ASoC: rockchip: add support for i2s-tdm controller")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20211125084900.417102-1-frattaroli.nicolas@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

For cs8409, it is required to run Jack Detect on resume.
Jack Detect on cs8409+cs42l42 requires an interrupt from
cs42l42 to be sent to cs8409 which is propogated to the driver
via an unsolicited event.
However, the hda_codec drops unsolicited events if the power_state
is not set to PMSG_ON. Which is set at the end of the resume call.
This means there is a race condition between setting power_state
to PMSG_ON and receiving the interrupt.
To solve this, we can add an API to set the power_state earlier
and call that before we start Jack Detect.
This does not cause issues, since we know inside our driver that
we are already initialized, and ready to handle the unsolicited
events.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Cc: <stable@vger.kernel.org> # v5.15+
Link: https://lore.kernel.org/r/20211128115558.71683-1-vitalyr@opensource.cirrus.comSigned-off-by: Takashi Iwai <tiwai@suse.de>

Merge series from Sameer Pujar <spujar@nvidia.com>:

	This series addresses following problems:
	 * The runtime PM is not balanced in MVC driver, whenever
	   mute or volume mixer controls are set.
	 * Some of the AHUB devices (SFC, MVC, Mixer, AMX and ADX)
	   use late system sleep. Suspend failure is seen on Jetson
	   TX2 platform.

Move the declaration of temporary arrays to somewhere that won't go out
of scope before the devm_clk_hw_register() call, lest we be at the whim
of the compiler for whether those stack variables get overwritten.

Fixes a crash seen with gcc version 11.2.1 20210728 (Red Hat 11.2.1-1)

Fixes: bdd229ab ("ASoC: rt5682s: Add driver for ALC5682I-VS codec")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211118010453.843286-2-robdclark@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Move the declaration of temporary arrays to somewhere that won't go out
of scope before the devm_clk_hw_register() call, lest we be at the whim
of the compiler for whether those stack variables get overwritten.

Fixes a crash seen with gcc version 11.2.1 20210728 (Red Hat 11.2.1-1)

Fixes: edbd24ea ("ASoC: rt5682: Drop usage of __clk_get_name()")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20211118010453.843286-1-robdclark@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for ADX device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for ADX device. Fix
the order by using normal system sleep.

Fixes: a99ab6f3 ("ASoC: tegra: Add Tegra210 based ADX driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-7-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for AMX device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for AMX device. Fix
the order by using normal system sleep.

Fixes: 77f7df34 ("ASoC: tegra: Add Tegra210 based AMX driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-6-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for Mixer device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for Mixer device. Fix
the order by using normal system sleep.

Fixes: 05bb3d5e ("ASoC: tegra: Add Tegra210 based Mixer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-5-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for MVC device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for MVC device. Fix
the order by using normal system sleep.

Fixes: e539891f ("ASoC: tegra: Add Tegra210 based MVC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-4-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>

The driver currently subscribes for a late system sleep call.
The initcall_debug log shows that suspend call for SFC device
happens after the parent device (AHUB). This seems to cause
suspend failure on Jetson TX2 platform. Also there is no use
of having late system sleep specifically for SFC device. Fix
the order by using normal system sleep.

Fixes: b2f74ec5 ("ASoC: tegra: Add Tegra210 based SFC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1637676459-31191-3-git-send-email-spujar@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org>