- 22 Jan, 2019 19 commits
-
-
Finn Thain authored
This patch addresses inconsistencies in Mac framebuffer drivers and their use of Kconfig symbols relating to NVRAM, so PPC64 can use CONFIG_NVRAM. The defined(CONFIG_NVRAM) condition is replaced with the weaker IS_REACHABLE(CONFIG_NVRAM) condition, like atari_scsi. Macintosh framebuffer drivers use default settings for color mode and video mode that are found in NVRAM. On PCI Macs, MacOS stores display settings in the Name Registry (NR) partition in NVRAM*. On NuBus Macs, there is no NR partition and MacOS stores display mode settings in PRAM**. Early-model Macs are the ones most likely to benefit from these settings, since they are more likely to have a fixed-frequency monitor connected to the built-in framebuffer device. Moreover, a single NV_CMODE value and a single NV_VMODE value provide for only one display. The NV_CMODE and NV_VMODE constants are apparently offsets into the NR partition for Old World machines. This also suggests that these defaults are not useful on later models. The NR partition seems to be optional on New World machines. CONFIG_NVRAM cannot be enabled on PPC64 at present. It is safe to say that NVRAM support in PowerMac fbdev drivers is only applicable to CONFIG_PPC32 so make this condition explicit. This means matroxfb driver won't crash on PPC64 when CONFIG_NVRAM becomes available there. For imsttfb, add the missing CONFIG_NVRAM test to prevent a build failure, since PPC64 does not implement nvram_read_byte(). Also add a missing machine_is(powermac) check. Change the inconsistent dependency on CONFIG_PPC and the matching #ifdef tests to CONFIG_PPC_PMAC. For valkyriefb, to improve clarity and consistency with the other PowerMac fbdev drivers, test for CONFIG_PPC_PMAC instead of !CONFIG_MAC. Remove a bogus comment regarding PRAM. * See GetPreferredConfiguration and SavePreferredConfiguration in "Designing PCI Cards and Drivers for Power Macintosh Computers". ** See SetDefaultMode and GetDefaultMode in "Designing Cards and Drivers for the Macintosh Family". Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Finn Thain authored
Add the powerpc-specific ioctls to the nvram module. This allows the nvram module to replace the generic_nvram module. Tested-by:
Stan Johnson <userm57@yahoo.com> Signed-off-by:
-
Finn Thain authored
Add the nvram_size() function to those PowerPC platforms that don't already have one: CHRP and PowerMac. This means that the ppc_md.nvram_size() function can be called by nvram_get_size(). Since we are addressing CHRP inconsistencies here, rename chrp_nvram_read and chrp_nvram_write, which break the naming convention used across powerpc platforms for NVRAM accessor functions. Tested-by:
-
Finn Thain authored
Signed-off-by:
-
Finn Thain authored
A multi-platform kernel binary has to decide at run-time how to dispatch the arch_nvram_ops calls. Add a platform-independent arch_nvram_ops struct for this, to replace the atari-specific one. Enable CONFIG_HAVE_ARCH_NVRAM_OPS for Macs. Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
-
Finn Thain authored
Certain Cuda transfers have to be ended by the driver. According to Apple's open source Cuda driver, as found in mkLinux and XNU, this applies to any "open ended request such as PRAM read". This fixes an infinite polling loop in cuda_pram_read_byte(). Tested-by:
-
Finn Thain authored
PMU-based m68k Macs pre-date PowerMac-style NVRAM. Use the appropriate PMU commands. Also implement the missing XPRAM accessors for VIA-based Macs. Acked-by:
-
Finn Thain authored
This is intended to improve code style and not affect code behaviour. Acked-by:
-
Finn Thain authored
Adopt the existing *_read_byte and *_write_byte naming convention. Rename via_pram_readbyte and via_pram_writebyte to avoid confusion. Adjust calling conventions of mac_pram_* functions to match the struct nvram_ops methods. Acked-by:
-
Finn Thain authored
Atari RTC NVRAM uses a checksum so implement the remaining arch_nvram_ops methods for the set_checksum and initialize ioctls. Enable CONFIG_HAVE_ARCH_NVRAM_OPS. Acked-by:
-
Finn Thain authored
Refactor the RTC "CMOS" NVRAM functions so that they can be used as arch_nvram_ops methods. Checksumming logic is moved from the misc device operations to the nvram read/write operations. This makes the misc device implementation more generic. This preserves the locking mechanism such that "read if checksum valid" and "write and update checksum" remain atomic operations. Some platforms implement byte-range read/write methods which are similar to file_operations struct methods. Other platforms provide only byte-at-a-time methods. The former are more efficient but may be unavailable so fall back on the latter methods when necessary. Tested-by:
-
Finn Thain authored
The drivers/char/nvram.c module has previously supported only RTC "CMOS" NVRAM, for which it provides appropriate checksum ioctls. Make these ioctls optional so the module can be re-used with other kinds of NVRAM. The ops struct methods that implement the ioctls now return error codes so that a multi-platform kernel binary can do the right thing when running on hardware without a suitable NVRAM. Signed-off-by:
-
Finn Thain authored
NVRAMs on different platforms and architectures have different attributes and access methods. E.g. some platforms have byte-at-a-time accessor functions while others have byte-range accessor functions. Some have checksum functionality while others do not. By calling ops struct methods via the common wrapper functions, the nvram module and other drivers can make use of the available NVRAM functionality in a portable way. Signed-off-by:
-
Finn Thain authored
Remove the nvram_read_byte() and nvram_write_byte() declarations in powerpc/include/asm/nvram.h and use the cross-platform static functions in linux/nvram.h instead. Tested-by:
-
Finn Thain authored
By implementing an arch_nvram_ops struct, a platform can re-use the drivers/char/nvram.c module without needing any arch-specific code in that module. Atari does so here. Acked-by:
-
Finn Thain authored
Replace nvram_* functions with static functions in nvram.h. These will become wrappers for struct nvram_ops method calls. This patch effectively disables existing NVRAM functionality so as to allow the rest of the series to be bisected without build failures. That functionality is gradually re-implemented in subsequent patches. Replace the sole validate-checksum-and-read-byte sequence with a call to nvram_read() which will gain the same semantics in subsequent patches. Remove unused exports. Acked-by:
-
Finn Thain authored
Also give functions more sensible names: nvram_misc_* for misc device ops, nvram_proc_* for proc file ops and nvram_module_* for init and exit functions. This prevents name collisions with nvram.h helper functions and improves readability. Signed-off-by:
-
Finn Thain authored
Move the m68k-specific code out of the driver to make the driver generic. I've used 'SPDX-License-Identifier: GPL-2.0+' for the new file because the old file is covered by MODULE_LICENSE("GPL"). Acked-by: -
Finn Thain authored
On powerpc, setting CONFIG_NVRAM=n builds a kernel with no NVRAM support. Setting CONFIG_NVRAM=m enables the /dev/nvram misc device module without enabling NVRAM support in drivers. Setting CONFIG_NVRAM=y enables the misc device (built-in) and also enables NVRAM support in drivers. m68k shares the valkyriefb driver with powerpc, and since that driver uses NVRAM, it is affected by CONFIG_ATARI_SCSI, because of the use of "select NVRAM". We can avoid the "select" here, but drivers still have to interpret the CONFIG_NVRAM symbol consistently regardless of platform. In this patch and the subsequent fbdev driver patch, the convention is adopted across all relevant platforms whereby NVRAM functionality gets enabled in a given device driver when the nvram misc device is built-in or when both drivers are modules. Acked-by:
Michael Schmitz <schmitzmic@gmail.com> Signed-off-by:
-
- 18 Jan, 2019 6 commits
-
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Peng Hao authored
Fix a style error. Remove redundant space. Signed-off-by:
Peng Hao <peng.hao2@zte.com.cn> Signed-off-by:
-
Peng Hao authored
Remove unnecessary semicolon in two functions. Signed-off-by:
-
Aditya Pakki authored
ics932s401_update_device may fail reading in i2c_smbus_read_word_data due to error in i2c_smbus_xfer. The fix checks the status and defaults the register to 0. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Colin Ian King authored
There is a hunk of code in a case statement that is indented one level too deeply, fix this by removing extra tabs. Also remove one empty line. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Silvio Cesare authored
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems. 1) Uses of size += snprintf(buf, SIZE - size, fmt, ...) In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf. 2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration. The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE. Signed-off-by:
Silvio Cesare <silvio.cesare@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Greg KH <greg@kroah.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
- 13 Jan, 2019 1 commit
-
-
Alexander Usyskin authored
single_recv_buf member of struct mei_client_properties has a boolean value and can be represented in on bit, to free other 7 bits for another usage. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
- 10 Jan, 2019 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into char-misc-next Kees writes: lkdtm updates and new tests - Check NULL dereferences (Christophe Leroy) - Print real addresses for debugging (Christophe Leroy) - Drop CONFIG_BLOCK dependency * tag 'lkdtm-next' of https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm: Add tests for NULL pointer dereference lkdtm: Print real addresses lkdtm: Do not depend on BLOCK and clean up headers
-
- 09 Jan, 2019 3 commits
-
-
Christophe Leroy authored
Introduce lkdtm tests for NULL pointer dereference: check access or exec at NULL address, since these errors tend to be reported differently from the general fault error text. For example from x86: pr_alert("BUG: unable to handle kernel %s at %px\n", address < PAGE_SIZE ? "NULL pointer dereference" : "paging request", (void *)address); Signed-off-by:Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Christophe Leroy authored
Today, when doing a lkdtm test before the readiness of the random generator, (ptrval) is printed instead of the address at which it perform the fault: [ 1597.337030] lkdtm: Performing direct entry EXEC_USERSPACE [ 1597.337142] lkdtm: attempting ok execution at (ptrval) [ 1597.337398] lkdtm: attempting bad execution at (ptrval) [ 1597.337460] kernel tried to execute user page (77858000) -exploit attempt? (uid: 0) [ 1597.344769] Unable to handle kernel paging request for instruction fetch [ 1597.351392] Faulting instruction address: 0x77858000 [ 1597.356312] Oops: Kernel access of bad area, sig: 11 [#1] If the lkdtm test is done later on, it prints an hashed address. In both cases this is pointless. The purpose of the test is to ensure the kernel generates an Oops at the expected address, so real addresses needs to be printed. This patch fixes that. Signed-off-by:
-
Kees Cook authored
After the transition to kprobes, symbols are resolved at runtime. This means there is no need to have all the Kconfig and header logic to avoid build failures. This also paves the way to having arbitrary test locations. Reported-by:
-
- 07 Jan, 2019 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - improve boolinit.cocci and use_after_iter.cocci semantic patches - fix alignment for kallsyms - move 'asm goto' compiler test to Kconfig and clean up jump_label CONFIG option - generate asm-generic wrappers automatically if arch does not implement mandatory UAPI headers - remove redundant generic-y defines - misc cleanups * tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: rename generated .*conf-cfg to *conf-cfg kbuild: remove unnecessary stubs for archheader and archscripts kbuild: use assignment instead of define ... endef for filechk_* rules arch: remove redundant UAPI generic-y defines kbuild: generate asm-generic wrappers if mandatory headers are missing arch: remove stale comments "UAPI Header export list" riscv: remove redundant kernel-space generic-y kbuild: change filechk to surround the given command with { } kbuild: remove redundant target cleaning on failure kbuild: clean up rule_dtc_dt_yaml kbuild: remove UIMAGE_IN and UIMAGE_OUT jump_label: move 'asm goto' support test to Kconfig kallsyms: lower alignment on ARM scripts: coccinelle: boolinit: drop warnings on named constants scripts: coccinelle: check for redeclaration kconfig: remove unused "file" field of yylval union nds32: remove redundant kernel-space generic-y nios2: remove unneeded HAS_DMA define
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling updates form Ingo Molnar: "A final batch of perf tooling changes: mostly fixes and small improvements" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) perf session: Add comment for perf_session__register_idle_thread() perf thread-stack: Fix thread stack processing for the idle task perf thread-stack: Allocate an array of thread stacks perf thread-stack: Factor out thread_stack__init() perf thread-stack: Allow for a thread stack array perf thread-stack: Avoid direct reference to the thread's stack perf thread-stack: Tidy thread_stack__bottom() usage perf thread-stack: Simplify some code in thread_stack__process() tools gpio: Allow overriding CFLAGS tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command tools thermal tmon: Allow overriding CFLAGS assignments tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command perf c2c: Increase the HITM ratio limit for displayed cachelines perf c2c: Change the default coalesce setup perf trace beauty ioctl: Beautify USBDEVFS_ commands perf trace beauty: Export function to get the files for a thread perf trace: Wire up ioctl's USBDEBFS_ cmd table generator perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands tools headers uapi: Grab a copy of usbdevice_fs.h perf trace: Store the major number for a file when storing its pathname ...
-
- 06 Jan, 2019 7 commits
-
-
Linus Torvalds authored
The semantics of what "in core" means for the mincore() system call are somewhat unclear, but Linux has always (since 2.3.52, which is when mincore() was initially done) treated it as "page is available in page cache" rather than "page is mapped in the mapping". The problem with that traditional semantic is that it exposes a lot of system cache state that it really probably shouldn't, and that users shouldn't really even care about. So let's try to avoid that information leak by simply changing the semantics to be that mincore() counts actual mapped pages, not pages that might be cheaply mapped if they were faulted (note the "might be" part of the old semantics: being in the cache doesn't actually guarantee that you can access them without IO anyway, since things like network filesystems may have to revalidate the cache before use). In many ways the old semantics were somewhat insane even aside from the information leak issue. From the very beginning (and that beginning is a long time ago: 2.3.52 was released in March 2000, I think), the code had a comment saying Later we can get more picky about what "in core" means precisely. and this is that "later". Admittedly it is much later than is really comfortable. NOTE! This is a real semantic change, and it is for example known to change the output of "fincore", since that program literally does a mmmap without populating it, and then doing "mincore()" on that mapping that doesn't actually have any pages in it. I'm hoping that nobody actually has any workflow that cares, and the info leak is real. We may have to do something different if it turns out that people have valid reasons to want the old semantics, and if we can limit the information leak sanely. Cc: Kevin Easton <kevin@guarana.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Masatake YAMATO <yamato@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit 594cc251 ("make 'user_access_begin()' do 'access_ok()'") broke both alpha and SH booting in qemu, as noticed by Guenter Roeck. It turns out that the bug wasn't actually in that commit itself (which would have been surprising: it was mostly a no-op), but in how the addition of access_ok() to the strncpy_from_user() and strnlen_user() functions now triggered the case where those functions would test the access of the very last byte of the user address space. The string functions actually did that user range test before too, but they did it manually by just comparing against user_addr_max(). But with user_access_begin() doing the check (using "access_ok()"), it now exposed problems in the architecture implementations of that function. For example, on alpha, the access_ok() helper macro looked like this: #define __access_ok(addr, size) \ ((get_fs().seg & (addr | size | (addr+size))) == 0) and what it basically tests is of any of the high bits get set (the USER_DS masking value is 0xfffffc0000000000). And that's completely wrong for the "addr+size" check. Because it's off-by-one for the case where we check to the very end of the user address space, which is exactly what the strn*_user() functions do. Why? Because "addr+size" will be exactly the size of the address space, so trying to access the last byte of the user address space will fail the __access_ok() check, even though it shouldn't. As a result, the user string accessor functions failed consistently - because they literally don't know how long the string is going to be, and the max access is going to be that last byte of the user address space. Side note: that alpha macro is buggy for another reason too - it re-uses the arguments twice. And SH has another version of almost the exact same bug: #define __addr_ok(addr) \ ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) so far so good: yes, a user address must be below the limit. But then: #define __access_ok(addr, size) \ (__addr_ok((addr) + (size))) is wrong with the exact same off-by-one case: the case when "addr+size" is exactly _equal_ to the limit is actually perfectly fine (think "one byte access at the last address of the user address space") The SH version is actually seriously buggy in another way: it doesn't actually check for overflow, even though it did copy the _comment_ that talks about overflow. So it turns out that both SH and alpha actually have completely buggy implementations of access_ok(), but they happened to work in practice (although the SH overflow one is a serious serious security bug, not that anybody likely cares about SH security). This fixes the problems by using a similar macro on both alpha and SH. It isn't trying to be clever, the end address is based on this logic: unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b; which basically says "add start and length, and then subtract one unless the length was zero". We can't subtract one for a zero length, or we'd just hit an underflow instead. For a lot of access_ok() users the length is a constant, so this isn't actually as expensive as it initially looks. Reported-and-tested-by:
Guenter Roeck <linux@roeck-us.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscryptLinus Torvalds authored
Pull fscrypt updates from Ted Ts'o: "Add Adiantum support for fscrypt" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: add Adiantum support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bug fixes from Ted Ts'o: "Fix a number of ext4 bugs" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix special inode number checks in __ext4_iget() ext4: track writeback errors using the generic tracking infrastructure ext4: use ext4_write_inode() when fsyncing w/o a journal ext4: avoid kernel warning when writing the superblock to a dead device ext4: fix a potential fiemap/page fault deadlock w/ inline_data ext4: make sure enough credits are reserved for dioread_nolock writes
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions introduced in this cycles: - fix dma-debug tracking for the map_page / map_single consolidatation - properly stub out DMA mapping symbols for !HAS_DMA builds to avoid link failures - fix AMD Gart direct mappings - setup the dma address for no kernel mappings using the remap allocator" * tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations x86/amd_gart: fix unmapping of non-GART mappings dma-mapping: remove a few unused exports dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA dma-mapping: remove dmam_{declare,release}_coherent_memory dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrs dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs -
Linus Torvalds authored
Merge tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - Changes for EC_MKBP_EVENT_SENSOR_FIFO handling. - Also, maintainership changes. Olofj out, Enric balletbo in. * tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: MAINTAINERS: add maintainers for ChromeOS EC sub-drivers MAINTAINERS: platform/chrome: Add Enric as a maintainer MAINTAINERS: platform/chrome: remove myself as maintainer platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes
-
git://github.com/andersson/remoteprocLinus Torvalds authored
Pull hwspinlock updates from Bjorn Andersson: "This adds support for the hardware semaphores found in STM32MP1" * tag 'hwlock-v4.21' of git://github.com/andersson/remoteproc: hwspinlock: fix return value check in stm32_hwspinlock_probe() hwspinlock: add STM32 hwspinlock device dt-bindings: hwlock: Document STM32 hwspinlock bindings
-
