* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: Call pagefault_disable/pagefault_enable in kmap_atomic/kunmap_atomic
  parisc: Remove unnecessary macros from entry.S
  parisc: LWS fixes for syscall.S
  parisc: Delete unnecessary nop's in entry.S
  parisc: Avoid interruption in critical region in entry.S
  parisc: invoke oom-killer from page fault
  parisc: clear floating point exception flag on SIGFPE signal
  parisc: Use of align_frame provides stack frame.

This reverts commit 0ac0c0d0, which
caused cross-architecture build problems for all the wrong reasons.
IA64 already added its own version of __node_random(), but the fact is,
there is nothing architectural about the function, and the original
commit was just badly done. Revert it, since no fix is forthcoming.
Requested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: clean up on forwarded aborted mds request
  ceph: fix leak of osd authorizer
  ceph: close out mds, osd connections before stopping auth
  ceph: make lease code DN specific
  fs/ceph: Use ERR_CAST
  ceph: renew auth tickets before they expire
  ceph: do not resend mon requests on auth ticket renewal
  ceph: removed duplicated #includes
  ceph: avoid possible null dereference
  ceph: make mds requests killable, not interruptible
  sched: add wait_for_completion_killable_timeout

Based on the generic implementation of kmap_atomic and kunmap_atomic,
we should call pagefault_disable and pagefault_enable in our PA8000
implementation.

The define for kmap_atomic_prot was also missing, and I updated
kmap_atomic_pfn to use the generic implementation because of the
change to kmap_atomic.

I believe that this change is needed to fix the fork copy-on-write
bug.
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

The EXTR, DEP and DEPI macros are unnecessary.  There are PA 1.X
pneumonics available with the same functionality, and the DEP and DEPI
macros conflict with assembler pneumonics.

Tested on a variety of 32 and 64-bit systems.
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

1) Gate immediately and save a branch.
2) Fix off by one error in checking entry number.
3) Use sr7 instead of sr3 in error return path as sr3 might not
   contain correct value.
4) Enable locking on UP systems to prevent incorrect operation of
   the cas_action critical region on page faults.

Tested on several systems, including UP c3750 with 2.6.33.2 kernel.
Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

Signed-off-by: John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

As explained in commit 1c0fe6e3, we want to call the architecture independent
oom killer when getting an unexplained OOM from handle_mm_fault, rather than
simply killing current.

Cc: linux-parisc@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

Clear the floating point exception flag before returning to
user space. This is needed, else the libc trampoline handler
may hit the same SIGFPE again while building up a trampoline
to a signal handler.

Fixes debian bug #559406.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

Any assembly constant generated with the use of
align_frame includes size for a full stack frame.
Signed-off-by: Carlos O'Donell <carlos@systemhalted.org>
Signed-off-by: Kyle McMartin <kyle@parisc-linux.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (26 commits)
  ALSA: snd-usb-caiaq: Bump version number to 1.3.21
  ALSA: Revert "ALSA: snd-usb-caiaq: Set default input mode of A4DJ"
  ALSA: snd-usb-caiaq: Simplify single case to an 'if'
  ALSA: snd-usb-caiaq: Restore 'Control vinyl' input mode on A4DJ
  ALSA: hda: Use LPIB for a Shuttle device
  ALSA: hda: Add support for another Lenovo ThinkPad Edge in conexant codec
  ALSA: hda: Use LPIB for Sony VPCS11V9E
  ALSA: usb-audio: fix feature unit parser for UAC2
  ALSA: asihpi - Minor code cleanup
  ALSA: asihpi - Add support for new ASI8800 family
  ALSA: asihpi - Fix bug preventing outstream_write preload from happening
  ALSA: asihpi - Fix imbalanced lock path in hw_message
  ALSA: asihpi - Remove support for old ASI8800 family
  ALSA: asihpi - Add hd radio blend functions
  ALSA: asihpi - Remove unused io map functions
  ALSA: usb-audio: add support for UAC2 pitch control
  ALSA: usb-audio: parse UAC2 endpoint descriptors correctly
  ALSA: usb-audio: fix return values
  ALSA: usb-audio: parse more format descriptors with structs
  sound: Add missing spin_unlock
  ...

Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Do not explicity set the default input mode. Use the hardware default
of mode 0 ('Control vinyl'), which is now available.

This reverts commit e3ca4c99.
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

After removing code, only one case remains. So use an 'if' instead.
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This feature was undocumented on early A4DJ units. It is indicated
by lighting both the 'line' and 'phono' lamps at the same time.
Newer units document this and the newer Windows drivers enable this
for all units, so restore the functionality.

This patch simplifies the code and changes the mode mapping to match
the A8DJ, favouring simpler code and consistency over keeping the
existing mapping.

Both 'Control vinyl' and 'Phono' input modes enable the hardware
preamp. The difference is the input impedance.

This reverts commit 9a9527ed.
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Mark Hills <mark@pogo.org.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

BugLink: https://launchpad.net/bugs/551949

Symptom: On the reporter's Shuttle device, using PulseAudio in Ubuntu
10.04 LTS results in "popping clicking" audio with the PA crashing
shortly thereafter.

Test case: Using Ubuntu 10.04 LTS (Linux 2.6.32.12), Linux 2.6.33, or
Linux 2.6.34, adjust the HDA device's volume with PulseAudio.

Resolution: add SSID for this machine to the position_fix quirk table,
explicitly specifying the LPIB method.
Reported-and-Tested-By: Christian Mehlis <mehlis@inf.fu-berlin.de>
Cc: <stable@kernel.org>
Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

If an mds request is aborted (timeout, SIGKILL), it is left registered to
keep our state in sync with the mds.  If we get a forward notification,
though, we know the request didn't succeed and we can unregister it
safely.  We were trying to resend it, but then bailing out (and not
unregistering) in __do_request.
Signed-off-by: Sage Weil <sage@newdream.net>

Release the ceph_authorizer when releasing osd state.
Signed-off-by: Sage Weil <sage@newdream.net>

The auth module (part of the mon_client) is needed to free any
ceph_authorizer(s) used by the mds and osd connections.  Flush the msgr
workqueue before stopping monc to ensure that the destroy_authorizer
auth op is available when those connections are closed out.
Signed-off-by: Sage Weil <sage@newdream.net>

The lease code includes a mask in the CEPH_LOCK_* namespace, but that
namespace is changing, and only one mask (formerly _DN == 1) is used, so
hard code for that value for now.

If we ever extend this code to handle leases over different data types we
can extend it accordingly.
Signed-off-by: Sage Weil <sage@newdream.net>

Use ERR_CAST(x) rather than ERR_PTR(PTR_ERR(x)).  The former makes more
clear what is the purpose of the operation, which otherwise looks like a
no-op.

In the case of fs/ceph/inode.c, ERR_CAST is not needed, because the type of
the returned value is the same as the type of the enclosing function.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
type T;
T x;
identifier f;
@@

T f (...) { <+...
- ERR_PTR(PTR_ERR(x))
+ x
 ...+> }

@@
expression x;
@@

- ERR_PTR(PTR_ERR(x))
+ ERR_CAST(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Sage Weil <sage@newdream.net>

We were only requesting renewal after our tickets expire; do so before
that.  Most of the low-level logic for this was already there; just use
it.
Signed-off-by: Sage Weil <sage@newdream.net>

We only want to send pending mon requests when we successfully
authenticate.  If we are already authenticated, like when we renew our
ticket, there is no need to resend pending requests.
Signed-off-by: Sage Weil <sage@newdream.net>

fs/ceph/auth.c: linux/slab.h is included more than once.
fs/ceph/super.h: linux/slab.h is included more than once.
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Sage Weil <sage@newdream.net>

ac->ops may be null; use protocol id in error message instead.
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sage Weil <sage@newdream.net>

The underlying problem is that many mds requests can't be restarted.  For
example, a restarted create() would return -EEXIST if the original request
succeeds.  However, we do not want a hung MDS to hang the client too.  So,
use the _killable wait_for_completion variants to abort on SIGKILL but
nothing else.
Signed-off-by: Sage Weil <sage@newdream.net>

Add missing _killable_timeout variant for wait_for_completion that will
return when a timeout expires or the task is killed.

CC: Ingo Molnar <mingo@elte.hu>
CC: Andreas Herrmann <andreas.herrmann3@amd.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Mike Galbraith <efault@gmx.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Sage Weil <sage@newdream.net>

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: fix the r100/r200 ums block 0 page fix

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: native hardware cpuidle driver for latest Intel processors
  ACPI: acpi_idle: touch TS_POLLING only in the non-MWAIT case
  acpi_pad: uses MONITOR/MWAIT, so it doesn't need to clear TS_POLLING
  sched: clarify commment for TS_POLLING
  ACPI: allow a native cpuidle driver to displace ACPI
  cpuidle: make cpuidle_curr_driver static
  cpuidle: add cpuidle_unregister_driver() error check
  cpuidle: fail to register if !CONFIG_CPU_IDLE

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits)
  ACPI: Don't let acpi_pad needlessly mark TSC unstable
  drivers/acpi/sleep.h: Checkpatch cleanup
  ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion
  ACPI: delete unused c-state promotion/demotion data strucutures
  ACPI: video: fix acpi_backlight=video
  ACPI: EC: Use kmemdup
  drivers/acpi: use kasprintf
  ACPI, APEI, EINJ injection parameters support
  Add x64 support to debugfs
  ACPI, APEI, Use ERST for persistent storage of MCE
  ACPI, APEI, Error Record Serialization Table (ERST) support
  ACPI, APEI, Generic Hardware Error Source memory error support
  ACPI, APEI, UEFI Common Platform Error Record (CPER) header
  Unified UUID/GUID definition
  ACPI Hardware Error Device (PNP0C33) support
  ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup
  ACPI, APEI, Document for APEI
  ACPI, APEI, EINJ support
  ACPI, APEI, HEST table parsing
  ACPI, APEI, APEI supporting infrastructure
  ...

airlied -> brown paper bag.

I blame Hi-5 or the Wiggles for lowering my IQ, move the fix inside some
brackets instead of breaking everything in site.

Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>