Markus reported that kthreads that idle using TASK_IDLE instead of
TASK_INTERRUPTIBLE are reported in as TASK_UNINTERRUPTIBLE and things
like htop mark those red.

This is undesirable, so add an explicit state for TASK_IDLE.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Remove yet another task-state char instance.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Convert trace_sched_switch to use the common task-state helpers and
fix the "X" and "Z" order, possibly they ended up in the wrong order
because TASK_REPORT has them in the wrong order too.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Bit patterns are easier in hex.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Currently get_task_state() and task_state_to_char() report different
states, create a number of common helpers and unify the reported state
space.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull ACPI fix from Rafael Wysocki:
 "This fixes an APEI problem that may cause a reported error to be
  missed due to a race condition"

* tag 'acpi-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / APEI: clear error status before acknowledging the error

Pull power management fixes from Rafael Wysocki:
 "These fix a deadlock in the operating performance points (OPP)
  framework introduced during the 4.11 cycle, more issues with duplicate
  device objects for cpufreq-dt and cpufreq documentation.

  Specifics:

   - Fix a deadlock in the operating performance points (OPP) framework
     caused by a notifier callback taking a lock that's already held by
     its caller (Viresh Kumar).

   - Prevent the ti-cpufreq and cpufreq-dt-platdev drivers from
     attempting to register conflicting device objects which triggers a
     warning from sysfs (Suniel Mahesh).

   - Drop a stale reference to a piece of intel_pstate documentation
     that's not in the tree any more (Rafael Wysocki)"

* tag 'pm-4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: docs: Drop intel-pstate.txt from index.txt
  cpufreq: dt: Fix sysfs duplicate filename creation for platform-device
  PM / OPP: Call notifier without holding opp_table->lock

Pull xfs fixes from Darrick Wong:

 - fix various problems with the copy-on-write extent maps getting freed
   at the wrong time

 - fix printk format specifier problems

 - report zeroing operation outcomes instead of dropping them on the
   floor

 - fix some crashes when dio operations partially fail

 - fix a race condition between unwritten extent conversion & dio read

 - fix some incorrect tests in the inode log item processing

 - correct the delayed allocation space reservations on rmap filesystems

 - fix some problems checking for dax support

* tag 'xfs-4.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: revert "xfs: factor rmap btree size into the indlen calculations"
  xfs: Capture state of the right inode in xfs_iflush_done
  xfs: perag initialization should only touch m_ag_max_usable for AG 0
  xfs: update i_size after unwritten conversion in dio completion
  iomap_dio_rw: Allocate AIO completion queue before submitting dio
  xfs: validate bdev support for DAX inode flag
  xfs: remove redundant re-initialization of total_nr_pages
  xfs: Output warning message when discard option was enabled even though the device does not support discard
  xfs: report zeroed or not correctly in xfs_zero_range()
  xfs: kill meaningless variable 'zero'
  fs/xfs: Use %pS printk format for direct addresses
  xfs: evict CoW fork extents when performing finsert/fcollapse
  xfs: don't unconditionally clear the reflink flag on zero-block files

This reverts commit dbbccdc4.

It turns out that the "legacy" users aren't so legacy at all, and that
turning off the legacy ioctl will break the current Qt bluetooth stack
for bluetooth LE devices that were released just a couple of months ago.

So it's simply not true that this was a legacy interface that hasn't
been needed and is only limited to old legacy BT devices.  Because I
actually read Kconfig help messages, and actively try to turn off
features that I don't need, I turned the option off.

Then I spent _way_ too much time debugging BLE issues until I realized
that it wasn't the Qt and subsurface development that had broken one of
my dive computer BLE downloads, but simply my broken kernel config.

Maybe in a decade it will be true that this is a legacy interface.  And
maybe with a better help-text and correct dependencies, this kind of
legacy removal might be acceptable.  But as things are right now both
the commit message and the Kconfig help text were misleading, and the
Kconfig option had the wrong dependenencies.

There's no reason to keep that broken Kconfig option in the tree.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* acpi-apei:
  ACPI / APEI: clear error status before acknowledging the error

Pull rdma fixes from Doug Ledford:
 "Second -rc update for 4.14.

  Both Mellanox and Intel had a series of -rc fixes that landed this
  week. The Mellanox bunch is spread throughout the stack and not just
  in their driver, where as the Intel bunch was mostly in the hfi1
  driver. And, several of the fixes in the hfi1 driver were more than
  just simple 5 line fixes. As a result, the hfi1 driver fixes has a
  sizable LOC count.

  Everything else is as one would expect in an RC cycle in terms of LOC
  count. One item that might jump out and make you think "That's not an
  rc item" is the fix that corrects a typo. But, that change fixes a
  typo in a user visible API that was just added in this merge window,
  so if we fix it now, we can fix it. If we don't, the typo is in the
  API forever. Another that might not appear to be a fix at first glance
  is the Simplify mlx5_ib_cont_pages patch, but the simplification
  allows them to fix a bug in the existing function whenever the length
  of an SGE exceeded page size. We also had to revert one patch from the
  merge window that was wrong.

  Summary:

   - a few core fixes
   - a few ipoib fixes
   - a few mlx5 fixes
   - a 7-patch hfi1 related series"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/hfi1: Unsuccessful PCIe caps tuning should not fail driver load
  IB/hfi1: On error, fix use after free during user context setup
  Revert "IB/ipoib: Update broadcast object if PKey value was changed in index 0"
  IB/hfi1: Return correct value in general interrupt handler
  IB/hfi1: Check eeprom config partition validity
  IB/hfi1: Only reset QSFP after link up and turn off AOC TX
  IB/hfi1: Turn off AOC TX after offline substates
  IB/mlx5: Fix NULL deference on mlx5_ib_update_xlt failure
  IB/mlx5: Simplify mlx5_ib_cont_pages
  IB/ipoib: Fix inconsistency with free_netdev and free_rdma_netdev
  IB/ipoib: Fix sysfs Pkey create<->remove possible deadlock
  IB: Correct MR length field to be 64-bit
  IB/core: Fix qp_sec use after free access
  IB/core: Fix typo in the name of the tag-matching cap struct

* pm-opp:
  PM / OPP: Call notifier without holding opp_table->lock

* pm-cpufreq:
  cpufreq: docs: Drop intel-pstate.txt from index.txt
  cpufreq: dt: Fix sysfs duplicate filename creation for platform-device

Pull seccomp fix from Kees Cook:
 "Fix refcounting bug in CRIU interface, noticed by Chris Salls (Oleg &
  Tycho)"

* tag 'seccomp-v4.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  seccomp: fix the usage of get/put_seccomp_filter() in seccomp_get_filter()

As Chris explains, get_seccomp_filter() and put_seccomp_filter() can end
up using different filters. Once we drop ->siglock it is possible for
task->seccomp.filter to have been replaced by SECCOMP_FILTER_FLAG_TSYNC.

Fixes: f8e529ed ("seccomp, ptrace: add support for dumping seccomp filters")
Reported-by: Chris Salls <chrissalls5@gmail.com>
Cc: stable@vger.kernel.org # needs s/refcount_/atomic_/ for v4.12 and earlier
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
[tycho: add __get_seccomp_filter vs. open coding refcount_inc()]
Signed-off-by: Tycho Andersen <tycho@docker.com>
[kees: tweak commit log]
Signed-off-by: Kees Cook <keescook@chromium.org>

Commit 33fc30b4 (cpufreq: intel_pstate: Document the current
behavior and user interface) dropped the intel-pstate.txt file
from Documentation/cpu-freq/, but it did not update the index.txt
file in there accordingly, so do that now.

Fixes: 33fc30b4 (cpufreq: intel_pstate: Document the current behavior and user interface)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently we acknowledge errors before clearing the error status.
This could cause a new error to be populated by firmware in-between
the error acknowledgment and the error status clearing which would
cause the second error's status to be cleared without being handled.
So, clear the error status before acknowledging the errors.

Also, make sure to acknowledge the error if the error status read
fails.
Signed-off-by: Tyler Baicar <tbaicar@codeaurora.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull quota and isofs fixes from Jan Kara:
 "Two quota fixes (fallout of the quota locking changes) and an isofs
  build fix"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: Fix quota corruption with generic/232 test
  isofs: fix build regression
  quota: add missing lock into __dquot_transfer()

Merge tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "This update consists of:

   - fixes to several existing tests

   - a test for regression introduced by b9470c27 ("inet: kill
     smallest_size and smallest_port")

   - seccomp support for glibc 2.26 siginfo_t.h

   - fixes to kselftest framework and tests to run make O=dir use-case

   - fixes to silence unnecessary test output to de-clutter test results"

* tag 'linux-kselftest-4.14-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (28 commits)
  selftests: timers: set-timer-lat: Fix hang when testing unsupported alarms
  selftests: timers: set-timer-lat: fix hang when std out/err are redirected
  selftests/memfd: correct run_tests.sh permission
  selftests/seccomp: Support glibc 2.26 siginfo_t.h
  selftests: futex: Makefile: fix for loops in targets to run silently
  selftests: Makefile: fix for loops in targets to run silently
  selftests: mqueue: Use full path to run tests from Makefile
  selftests: futex: copy sub-dir test scripts for make O=dir run
  selftests: lib.mk: copy test scripts and test files for make O=dir run
  selftests: sync: kselftest and kselftest-clean fail for make O=dir case
  selftests: sync: use TEST_CUSTOM_PROGS instead of TEST_PROGS
  selftests: lib.mk: add TEST_CUSTOM_PROGS to allow custom test run/install
  selftests: watchdog: fix to use TEST_GEN_PROGS and remove clean
  selftests: lib.mk: fix test executable status check to use full path
  selftests: Makefile: clear LDFLAGS for make O=dir use-case
  selftests: lib.mk: kselftest and kselftest-clean fail for make O=dir case
  Makefile: kselftest and kselftest-clean fail for make O=dir case
  selftests/net: msg_zerocopy enable build with older kernel headers
  selftests: actually run the various net selftests
  selftest: add a reuseaddr test
  ...

Pull x86 fpu fixes and cleanups from Ingo Molnar:
 "This is _way_ more cleanups than fixes, but the bugs were subtle and
  hard to hit, and the primary reason for them existing was the
  unnecessary historical complexity of some of the x86/fpu interfaces.

  The first bunch of commits clean up and simplify the xstate user copy
  handling functions, in reaction to the collective head-scratching
  about the xstate user-copy handling code that leads up to the fix for
  this SkyLake xstate handling bug:

     0852b374: x86/fpu: Add FPU state copying quirk to handle XRSTOR failure on Intel Skylake CPUs

  The cleanups don't change any functionality, they just (hopefully)
  make it all clearer, more consistent, more debuggable and more robust.

  Note that most of the linecount increase comes from these commits,
  where we better split the user/kernel copy logic by having more
  variants, instead repeated fragile patterns of:

               if (kbuf) {
                       memcpy(kbuf + pos, data, copy);
               } else {
                       if (__copy_to_user(ubuf + pos, data, copy))
                               return -EFAULT;
               }

  The next bunch of commits simplify the FPU state-machine to get rid of
  old lazy-FPU idiosyncrasies - a defensive simplification to make all
  the code easier to review and fix. No change in functionality.

  Then there's a couple of additional debugging tweaks: static checker
  warning fix and move an FPU related warning to under WARN_ON_FPU(),
  followed by another bunch of commits that represent a finegrained
  split-up of the fixes from Eric Biggers to handle weird xstate bits
  properly.

  I did this finegrained split-up because some of these fixes also
  impact the ABI for weird xstate handling, for which we'd like to have
  good bisection results, should they cause any problems. (We also had
  one regression with the more monolithic fixes, so splitting it all up
  sounded prudent for robustness reasons as well.)

  About the whole series: the commits up to 03eaec81 have been in
  -next for months - but I've recently rebased them to remove a state
  machine clean-up commit that was objected to, and to make it more
  bisectable - so technically it's a new, rebased tree.

  Robustness history: this series had some regressions along the way,
  and all reported regressions have been fixed. All but one of the
  regressions manifested itself as easy to report warnings. The previous
  version of this latest series was also in linux-next, with one
  (warning-only) regression reported which is fixed in the latest
  version.

  Barring last minute brown paper bag bugs (and the commits are now
  older by a day which I'd hope helps paperbag reduction), I'm
  reasonably confident about its general robustness.

  Famous last words ..."

* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  x86/fpu: Use using_compacted_format() instead of open coded X86_FEATURE_XSAVES
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_user_to_xstate()
  x86/fpu: Eliminate the 'xfeatures' local variable in copy_user_to_xstate()
  x86/fpu: Copy the full header in copy_user_to_xstate()
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in copy_kernel_to_xstate()
  x86/fpu: Eliminate the 'xfeatures' local variable in copy_kernel_to_xstate()
  x86/fpu: Copy the full state_header in copy_kernel_to_xstate()
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in __fpu__restore_sig()
  x86/fpu: Use validate_xstate_header() to validate the xstate_header in xstateregs_set()
  x86/fpu: Introduce validate_xstate_header()
  x86/fpu: Rename fpu__activate_fpstate_read/write() to fpu__prepare_[read|write]()
  x86/fpu: Rename fpu__activate_curr() to fpu__initialize()
  x86/fpu: Simplify and speed up fpu__copy()
  x86/fpu: Fix stale comments about lazy FPU logic
  x86/fpu: Rename fpu::fpstate_active to fpu::initialized
  x86/fpu: Remove fpu__current_fpstate_write_begin/end()
  x86/fpu: Fix fpu__activate_fpstate_read() and update comments
  x86/fpu: Reinitialize FPU registers if restoring FPU state fails
  x86/fpu: Don't let userspace set bogus xcomp_bv
  x86/fpu: Turn WARN_ON() in context switch into WARN_ON_FPU()
  ...

Failure to tune PCIe capabilities should not fail driver load. This can
cause the driver load to fail on systems with any of the following:
1. HFI's parent is not root. Example: HFI card is behind a PCIe bridge.
2. HFI's parent is not PCI Express capable.
In these situations, failure to tune PCIe capabilities should be logged
in the system message logs but not cause the driver load to fail.

This patch also ensures pcie capability word DevCtl is written only
after a successful read and the capability tuning process continues
even if read/write of the pcie capability word DevCtl fails.

Fixes: c53df62c ("IB/hfi1: Check return values from PCI config API calls")
Fixes: bf70a775 ("staging/rdma/hfi1: Enable WFR PCIe extended tags from the driver")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

During base context setup, if setup_base_ctxt() fails, the context is
deallocated. This is incorrect because the context is referenced on
return, to notify any waiting subcontext.  If there are no subcontexts
the pointer will be invalid.

Reorganize the error path so that deallocate_ctxt() is called after all
the possible subcontexts have been notified.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

commit 9a9b8112 will cause core to fail UD QP from being destroyed
on ipoib unload, therefore cause resources leakage.
On pkey change event above patch modifies mgid before calling underlying
driver to detach it from QP. Drivers' detach_mcast() will fail to find
modified mgid it was never given to attach in a first place.
Core qp->usecnt will never go down, so ib_destroy_qp() will fail.

IPoIB driver actually does take care of new broadcast mgid based on new
pkey by destroying an old mcast object in ipoib_mcast_dev_flush())
....
	if (priv->broadcast) {
		rb_erase(&priv->broadcast->rb_node, &priv->multicast_tree);
		list_add_tail(&priv->broadcast->list, &remove_list);
		priv->broadcast = NULL;
	}
...

then in restarted ipoib_macst_join_task() creating a new broadcast mcast
object, sending join request and on completion tells the driver to attach
to reinitialized QP:
...
if (!priv->broadcast) {
...
	broadcast = ipoib_mcast_alloc(dev, 0);
...
	memcpy(broadcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
	       sizeof (union ib_gid));
	priv->broadcast = broadcast;
...

Fixes: 9a9b8112 ("IB/ipoib: Update broadcast object if PKey value was changed in index 0")
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

The general interrupt handler returns IRQ_HANDLED whether an IRQ
was handled or not.
Determine if an IRQ was handled and return the correct value.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Kamenee Arumugam <kamenee.arumugam@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Relying on a trailing magic value is incorrect. There are instances where
this is not present as trailing magic value has a specific purpose which is
not partition validation. Instead use the header magic value which is
present in all variants of the platform configuration and is intended for
validation. This is also used in other locations in the driver.

Fixes: bc5214ee (IB/hfi1: Handle missing magic values in config file)
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

QSFP reset enables AOC transmitters by default. They should be off
before moving to high power mode to complete the setup. There is no
need to reset the QSFP during LNI failure as it was reset at link down.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Offline.quietDuration was added in the 8051 firmware, and the driver
only turns off the AOC transmitters when offline.quiet is reached.
However, the AOC transmitters need to be turned off at the new state.
Therefore, turn off the AOC transmitters at any offline substates
including offline.quiet and offline.quietDuration, then recheck we
reached offline.quiet to support backwards compatibility.
Reviewed-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Eric has reported that since commit d2faa415 "quota: Do not acquire
dqio_sem for dquot overwrites in v2 format" test generic/232
occasionally fails due to quota information being incorrect. Indeed that
commit was too eager to remove dqio_sem completely from the path that
just overwrites quota structure with updated information. Although that
is innocent on its own, another process that inserts new quota structure
to the same block can perform read-modify-write cycle of that block thus
effectively discarding quota information update if they race in a wrong
way.

Fix the problem by acquiring dqio_sem for reading for overwrites of
quota structure. Note that it *is* possible to completely avoid taking
dqio_sem in the overwrite path however that will require modifying path
inserting / deleting quota structures to avoid RMW cycles of the full
block and for now it is not clear whether it is worth the hassle.

Fixes: d2faa415Reported-and-tested-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

Pull MMC fixes from Ulf Hansson:

  - sdhci-pci: Fix voltage switch for some Intel host controllers

  - tmio: remove broken and noisy debug macro

* tag 'mmc-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci: Fix voltage switch for some Intel host controllers
  mmc: tmio: remove broken and noisy debug macro

In generic_file_llseek_size, return -ENXIO for negative offsets as well
as offsets beyond EOF.  This affects filesystems which don't implement
SEEK_HOLE / SEEK_DATA internally, possibly because they don't support
holes.

Fixes xfstest generic/448.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

In commit fd26a880 we added a worst case estimate for rmapbt blocks
needed to satisfy the block mapping request.  Since then, we added the
ability to reserve enough space in each AG such that we should never run
out of blocks to grow the rmapbt, which makes this calculation
unnecessary.  Revert the commit because it makes the extra delalloc
indlen accounting unnecessary and incorrect.
Reported-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

My previous patch: d3a304b6 check for
XFS_LI_FAILED flag xfs_iflush done, so the failed item can be properly
resubmitted.

In the loop scanning other inodes being completed, it should check the
current item for the XFS_LI_FAILED, and not the initial one.

The state of the initial inode is checked after the loop ends

Kudos to Eric for catching this.
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

We call __xfs_ag_resv_init to make a per-AG reservation for each AG.
This makes the reservation per-AG, not per-filesystem.  Therefore, it
is incorrect to adjust m_ag_max_usable for each AG.  Adjust it only
when we're reserving AG 0's blocks so that we only do it once per fs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>

Since commit d531d91d ("xfs: always use unwritten extents for
direct I/O writes"), we start allocating unwritten extents for all
direct writes to allow appending aio in XFS.

But for dio writes that could extend file size we update the in-core
inode size first, then convert the unwritten extents to real
allocations at dio completion time in xfs_dio_write_end_io(). Thus a
racing direct read could see the new i_size and find the unwritten
extents first and read zeros instead of actual data, if the direct
writer also takes a shared iolock.

Fix it by updating the in-core inode size after the unwritten extent
conversion. To do this, introduce a new boolean argument to
xfs_iomap_write_unwritten() to tell if we want to update in-core
i_size or not.
Suggested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Executing xfs/104 test in a loop on Linux-v4.13 kernel on a ppc64
machine can cause the following NULL pointer dereference,

.queue_work_on+0x4c/0x80
.iomap_dio_bio_end_io+0xbc/0x1f0
.bio_endio+0x118/0x1f0
.blk_update_request+0xd0/0x470
.blk_mq_end_request+0x24/0xc0
.lo_complete_rq+0x40/0xe0
.__blk_mq_complete_request_remote+0x28/0x40
.flush_smp_call_function_queue+0xc4/0x1e0
.smp_ipi_demux_relaxed+0x8c/0x100
.icp_hv_ipi_action+0x54/0xa0
.__handle_irq_event_percpu+0x84/0x2c0
.handle_irq_event_percpu+0x28/0x80
.handle_percpu_irq+0x78/0xc0
.generic_handle_irq+0x40/0x70
.__do_irq+0x88/0x200
.call_do_irq+0x14/0x24
.do_IRQ+0x84/0x130

This occurs due to the following sequence of events,

1. Allocate dio for Direct I/O write.
2. Invoke iomap_apply() until iov_iter_count() bytes have been submitted.
   - Assume that we have submitted atleast one bio. Hence iomap_dio->ref value
     will be >= 2.
   - If during the second iteration, iomap_apply() ends up returning -ENOSPC, we would
     break out of the loop and since the 'ret' value is a negative number we
     end up not allocating memory for super_block->s_dio_done_wq.
3. Meanwhile, iomap_dio_bio_end_io() is invoked for bios that have been
   submitted and here the code ends up dereferencing the NULL pointer stored
   at super_block->s_dio_done_wq.

This commit fixes the bug by allocating memory for
super_block->s_dio_done_wq before iomap_apply() is invoked.
Reported-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Currently only the blocksize is checked, but we should really be calling
bdev_dax_supported() which also tests to make sure we can get a
struct dax_device and that the dax_direct_access() path is working.

This is the same check that we do for the "-o dax" mount option in
xfs_fs_fill_super().

This does not fix the race issues that caused the XFS DAX inode option to
be disabled, so that option will still be disabled.  If/when we re-enable
it, though, I think we will want this issue to have been fixed.  I also do
think that we want to fix this in stable kernels.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
CC: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

Signed-off-by: Ingo Molnar <mingo@kernel.org>

This is the canonical method to use.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-11-mingo@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Tighten the checks in copy_user_to_xstate().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-10-mingo@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

We now have this field in hdr.xfeatures.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Halcrow <mhalcrow@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: kernel-hardening@lists.openwall.com
Link: http://lkml.kernel.org/r/20170924105913.9157-9-mingo@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>