From: Hugh Dickins <hugh@veritas.com>

Before some real vma_merge work in mmap.c in the next patch, a patch of
miscellaneous cleanups to cut down the noise:

- remove rb_parent arg from vma_merge: mm->mmap can do that case
- scatter pgoff_t around to ingratiate myself with the boss
- reorder is_mergeable_vma tests, vm_ops->close is least likely
- can_vma_merge_before take combined pgoff+pglen arg (from Andrea)
- rearrange do_mmap_pgoff's ever-confusing anonymous flags switch
- comment do_mmap_pgoff's mysterious (vm_flags & VM_SHARED) test
- fix ISO C90 warning on browse_rb if building with DEBUG_MM_RB
- stop that long MNT_NOEXEC line wrapping

Yes, buried in amidst these is indeed one pgoff replaced by "next->vm_pgoff -
pglen" (reverting a mod of mine which took pgoff supplied by user too
seriously in the anon case), and another pgoff replaced by 0 (reverting
anon_vma mod which crept in with NUMA API): neither of them really matters,
except perhaps in /proc/pid/maps.

From: Hugh Dickins <hugh@veritas.com>

First of a batch of seven rmap patches, based on 2.6.6-mm3.  Probably the
final batch: remaining issues outstanding can have isolated patches.  The
first half of the batch is good for anonmm or anon_vma, the second half of the
batch replaces my anonmm rmap by Andrea's anon_vma rmap.

Judge for yourselves which you prefer.  I do think I was wrong to call
anon_vma more complex than anonmm (its lists are easier to understand than my
refcounting), and I'm happy with its vma merging after the last patch.  It
just comes down to whether we can spare the extra 24 bytes (maximum, on
32-bit) per vma for its advantages in swapout and mremap.

rmap 34 vm_flags page_table_lock

Why do we guard vm_flags mods with page_table_lock when it's already
down_write guarded by mmap_sem?  There's probably a historical reason, but no
sign of any need for it now.  Andrea added a comment and removed the instance
from mprotect.c, Hugh plagiarized his comment and removed the instances from
madvise.c and mlock.c.  Huge leap in scalability...  not expected; but this
should stop people asking why those spinlocks.

From: Hugh Dickins <hugh@veritas.com>

anon_vma will need to pass vma to put_dirty_page, so change it and its
various callers (setup_arg_pages and its 32-on-64-bit arch variants); and
please, let's rename it to install_arg_page.

Earlier attempt to do this (rmap 26 __setup_arg_pages) tried to clean up
those callers instead, but failed to boot: so now apply rmap 27's memset
initialization of vmas to these callers too; which relieves them from
needing the recently included linux/mempolicy.h.

While there, moved install_arg_page's flush_dcache_page up before
page_table_lock - doesn't in fact matter at all, just saves one worry when
researching flush_dcache_page locking constraints.

From: Hugh Dickins <hugh@veritas.com>

From: Andrea Arcangeli <andrea@suse.de>

zap_pmd_range, alone of all those page_range loops, lacks the check for
whether address wrapped.  Hugh is in doubt as to whether this makes any
difference to any config on any arch, but eager to fix the odd one out.

From: Hugh Dickins <hugh@veritas.com>

From: Andrea Arcangeli <andrea@suse.de>

Sprinkle unlikelys throughout mm/memory.c, wherever we see a pgd_bad or a
pmd_bad; likely or unlikely on pte_same or !pte_same.  Put the jump in the
error return from do_no_page, not in the fast path.

From: Hugh Dickins <hugh@veritas.com>

From: Andrea Arcangeli <andrea@suse.de>

page_alloc.c's bad_page routine should reset a bad mapcount; and it's more
revealing to show the bad mapcount than just the boolean mapped.

From: Hugh Dickins <hugh@veritas.com>

From: Andrea Arcangeli <andrea@suse.de>

Set VM_RESERVED in videobuf_mmap_mapper, to warn do_no_page and swapout not to
worry about its pages.  Set VM_RESERVED in ia64_elf32_init, it too provides an
unusual nopage which might surprise higher level checks.  Future safety: they
don't actually pose a problem in this current tree.

From: Hugh Dickins <hugh@veritas.com>

The callers of remove_shared_vm_struct then proceed to do several more
identical things: gather them together in remove_vm_struct.

From: Hugh Dickins <hugh@veritas.com>

We're NULLifying more and more fields when initializing a vma
(mpol_set_vma_default does that too, if configured to do anything).  Now use
memset to avoid specifying fields, and save a little code too.

(Yes, I realize anon_vma will want to set vm_pgoff non-0, but I think that
will be better handled at the core, since anon vm_pgoff is negotiable up until
an anon_vma is actually assigned.)

From: Hugh Dickins <hugh@veritas.com>

I like CONFIG_REGPARM, even when it's forced on: because it's easy to force
off for debugging - easier than editing out scattered fastcalls.  Plus I've
never understood why we make function foo a fastcall, but function bar not.
Remove fastcall directives from rmap.  And fix comment about mremap_moved
race: it only applies to anon pages.

From: Hugh Dickins <hugh@veritas.com>

Most architectures (like i386) do nothing in flush_dcache_page, or don't scan
i_mmap in flush_dcache_page, so don't need flush_dcache_mmap_lock to do
anything: define it and flush_dcache_mmap_unlock away.  Noticed arm26, cris,
h8300 still defining flush_page_to_ram: delete it again.

From: Hugh Dickins <hugh@veritas.com>

arm and parisc __flush_dcache_page have been scanning the i_mmap(_shared) list
without locking or disabling preemption.  That may be even more unsafe now
it's a prio tree instead of a list.

It looks like we cannot use i_shared_lock for this protection: most uses of
flush_dcache_page are okay, and only one would need lock ordering fixed
(get_user_pages holds page_table_lock across flush_dcache_page); but there's a
few (e.g.  in net and ntfs) which look as if they're using it in I/O
completion - and it would be restrictive to disallow it there.

So, on arm and parisc only, define flush_dcache_mmap_lock(mapping) as
spin_lock_irq(&(mapping)->tree_lock); on i386 (and other arches left to the
next patch) define it away to nothing; and use where needed.

While updating locking hierarchy in filemap.c, remove two layers of the fossil
record from add_to_page_cache comment: no longer used for swap.

I believe all the #includes will work out, but have only built i386.  I can
see several things about this patch which might cause revulsion: the name
flush_dcache_mmap_lock?  the reuse of the page radix_tree's tree_lock for this
different purpose?  spin_lock_irqsave instead?  can't we somehow get
i_shared_lock to handle the problem?

From: Hugh Dickins <hugh@veritas.com>

Why should try_to_unmap_anon and try_to_unmap_file take a copy of
page->mapcount and pass it down for try_to_unmap_one to decrement?  why not
just check page->mapcount itself?  asks akpm.  Perhaps there used to be a good
reason, but not any more: remove the mapcount arg.

From: Hugh Dickins <hugh@veritas.com>

Why should struct address_space have separate i_mmap and i_mmap_shared
prio_trees (separating !VM_SHARED and VM_SHARED vmas)?  No good reason, the
same processing is usually needed on both.  Merge i_mmap_shared into i_mmap,
but keep i_mmap_writable count of VM_SHARED vmas (those capable of dirtying
the underlying file) for the mapping_writably_mapped test.

The VM_MAYSHARE test in the arm and parisc loops is not necessarily what they
will want to use in the end: it's provided as a harmless example of what might
be appropriate, but maintainers are likely to revise it later (that parisc
loop is currently being changed in the parisc tree anyway).

On the way, remove the now out-of-date comments on vm_area_struct size.

From: Christoph Hellwig <hch@lst.de>

From: Hugh Dickins <hugh@veritas.com>

Missed comment on the size of vm_area_struct: it is no longer 64 bytes on
ia32.

From: Hugh Dickins <hugh@veritas.com>

The previous patches of this prio_tree batch have been to generic only.  Now
the arm and parisc __flush_dcache_page are converted to using
vma_prio_tree_next, and benefit from its selection of relevant vmas.  They're
still accessing the tree without i_shared_lock or any other, that's not
forgotten but still under investigation.  Include pagemap.h for the definition
of PAGE_CACHE_SHIFT.  s390 and x86_64 no longer initialize vma's shared field
(whose type has changed), done later.

From: Hugh Dickins <hugh@veritas.com>

The prio_tree is of no use to nonlinear vmas: currently we're having to search
the tree in the most inefficient way to find all its nonlinears.  At the very
least we need an indication of the unlikely case when there are some
nonlinears; but really, we'd do best to take them out of the prio_tree
altogether, into a list of their own - i_mmap_nonlinear.

From: Hugh Dickins <hugh@veritas.com>

Rajesh Venkatasubramanian's implementation of a radix priority search tree of
vmas, to handle object-based reverse mapping corner cases well.

Amongst the objections to object-based rmap were test cases by akpm and by
mingo, in which large numbers of vmas mapping disjoint or overlapping parts of
a file showed strikingly poor performance of the i_mmap lists.  Perhaps those
tests are irrelevant in the real world?  We cannot be too sure: the prio_tree
is well-suited to solving precisely that problem, so unless it turns out to
bring too much overhead, let's include it.

Why is this prio_tree.c placed in mm rather than lib?  See GET_INDEX: this
implementation is geared throughout to use with vmas, though the first half of
the file appears more general than the second half.

Each node of the prio_tree is itself (contained within) a vma: might save
memory by allocating distinct nodes from which to hang vmas, but wouldn't save
much, and would complicate the usage with preallocations.  Off each node of
the prio_tree itself hangs a list of like vmas, if any.

The connection from node to list is a little awkward, but probably the best
compromise: it would be more straightforward to list likes directly from the
tree node, but that would use more memory per vma, for the list_head and to
identify that head.  Instead, node's shared.vm_set.head points to next vma
(whose shared.vm_set.head points back to node vma), and that next contains the
list_head from which the rest hang - reusing fields already used in the
prio_tree node itself.

Currently lacks prefetch: Rajesh hopes to add some soon.

From: Hugh Dickins <hugh@veritas.com>

Pave the way for prio_tree by switching over to its interfaces, but actually
still implement them with the same old lists as before.

Most of the vma_prio_tree interfaces are straightforward.  The interesting one
is vma_prio_tree_next, used to search the tree for all vmas which overlap the
given range: unlike the list_for_each_entry it replaces, it does not find
every vma, just those that match.

But this does leave handling of nonlinear vmas in a very unsatisfactory state:
for now we have to search again over the maximum range to find all the
nonlinear vmas which might contain a page, which of course takes away the
point of the tree.  Fixed in later patch of this batch.

There is no need to initialize vma linkage all over, just do it before
inserting the vma in list or tree.  /proc/pid/statm had an odd test for its
shared count: simplified to an equivalent test on vm_file.

From: Hugh Dickins <hugh@veritas.com>

If file-based vmas are to be kept in a tree, according to the file offsets
they map, then adjusting the vma's start pgoff or its end involves
repositioning in the tree, while holding i_shared_lock (and page_table_lock). 
We used to avoid that if possible, e.g.  when just moving end; but if we're
heading that way, let's now tidy up vma_merge and split_vma, and do all the
locking and adjustment in a new helper vma_adjust.  And please, let's call the
next vma in vma_merge "next" rather than "prev".

Since these patches are diffed over 2.6.6-rc2-mm2, they include the NUMA
mpolicy mods which you'll have to remove to go earlier in the series, sorry
for that nuisance.  I have intentionally changed the one vma_mpol_equal to
mpol_equal, to make the merge cases more alike.

From: Andi Kleen <ak@suse.de>

This fixes a user triggerable crash in mbind() in NUMA API.  It would oops
when running into the end of memory.  Actually not really oops, because a
oops with the mm sem hold for writing always deadlocks.

From: Andi Kleen <ak@suse.de>

Change to core VM to use alloc_page_vma() instead of alloc_page().

Change the swap readahead to follow the policy of the VMA.

From: Andi Kleen <ak@suse.de>

Add NUMA hit/miss statistics to page allocation and display them in sysfs.

This is not 100% required for NUMA API, but without this it is very

The overhead is quite low because all counters are per CPU and only happens
when CONFIG_NUMA is defined.

From: Christoph Hellwig <hch@lst.de>

- don't include mempolicy.h in sched.h and mm.h when a forward delcaration
  is enough.  Andi argued against that in the past, but I'd really hate to add
  another header to two of the includes used in basically every driver when we
  can include it in the six files actually needing it instead (that number is
  for my ppc32 system, maybe other arches need more include in their
  directories)

- make numa api fields in tast_struct conditional on CONFIG_NUMA, this gives
  us a few ugly ifdefs but avoids wasting memory on non-NUMA systems.

From: Andi Kleen <ak@suse.de>

Add support to tmpfs and hugetlbfs to support NUMA API.  Shared memory is a
bit of a special case for NUMA policy.  Normally policy is associated to VMAs
or to processes, but for a shared memory segment you really want to share the
policy.  The core NUMA API has code for that, this patch adds the necessary
changes to tmpfs and hugetlbfs.

First it changes the custom swapping code in tmpfs to follow the policy set
via VMAs.

It is also useful to have a "backing store" of policy that saves the policy
even when nobody has the shared memory segment mapped.  This allows command
line tools to pre configure policy, which is then later used by programs.

Note that hugetlbfs needs more changes - it is also required to switch it to
lazy allocation, otherwise the prefault prevents mbind() from working.

From: Andi Kleen <ak@suse.de>

NUMA API adds a policy to each VMA.  During VMA creattion, merging and
splitting these policies must be handled properly.  This patch adds the calls
to this. 

It is a nop when CONFIG_NUMA is not defined.

From: Andi Kleen <ak@suse.de>

Patch readds the sysfs output of the NUMA API statistics.  All my test
scripts need this and it is very useful to check if the policy actually
works.

This got lost when the huge page numa api changes got dropped.

I decided to not resend the huge pages NUMA API changes for now.  Instead I
will wait for this area to settle when demand paged large pages is merged.

From: Hugh Dickins <hugh@veritas.com>

I think Andi missed the copy_vma I recently added for mremap, and it'll
need something like below....  (Doesn't look like it'll optimize away when
it's not needed - rather bloaty.)

From: Andi Kleen <ak@suse.de>

The following patches add support for configurable NUMA memory policy
for user processes. It is based on the proposal from last kernel summit
with feedback from various people.

This NUMA API doesn't not attempt to implement page migration or anything
else complicated: all it does is to police the allocation when a page
is first allocation or when a page is reallocated after swapping. Currently
only support for shared memory and anonymous memory is there; policy for
file based mappings is not implemented yet (although they get implicitely
policied by the default process policy)

It adds three new system calls: mbind to change the policy of a VMA,
set_mempolicy to change the policy of a process, get_mempolicy to retrieve
memory policy. User tools (numactl, libnuma, test programs, manpages) can be
found in  ftp://ftp.suse.com/pub/people/ak/numa/numactl-0.6.tar.gz

For details on the system calls see the manpages
http://www.firstfloor.org/~andi/mbind.html
http://www.firstfloor.org/~andi/set_mempolicy.html
http://www.firstfloor.org/~andi/get_mempolicy.html
Most user programs should actually not use the system calls directly,
but use the higher level functions in libnuma
(http://www.firstfloor.org/~andi/numa.html) or the command line tools
(http://www.firstfloor.org/~andi/numactl.html

The system calls allow user programs and administors to set various NUMA memory
policies for putting memory on specific nodes. Here is a short description
of the policies copied from the kernel patch:

 * NUMA policy allows the user to give hints in which node(s) memory should
 * be allocated.
 *
 * Support four policies per VMA and per process:
 *
 * The VMA policy has priority over the process policy for a page fault.
 *
 * interleave     Allocate memory interleaved over a set of nodes,
 *                with normal fallback if it fails.
 *                For VMA based allocations this interleaves based on the
 *                offset into the backing object or offset into the mapping
 *                for anonymous memory. For process policy an process counter
 *                is used.
 * bind           Only allocate memory on a specific set of nodes,
 *                no fallback.
 * preferred      Try a specific node first before normal fallback.
 *                As a special case node -1 here means do the allocation
 *                on the local CPU. This is normally identical to default,
 *                but useful to set in a VMA when you have a non default
 *                process policy.
 * default        Allocate on the local node first, or when on a VMA
 *                use the process policy. This is what Linux always did
 *                in a NUMA aware kernel and still does by, ahem, default.
 *
 * The process policy is applied for most non interrupt memory allocations
 * in that process' context. Interrupts ignore the policies and always
 * try to allocate on the local CPU. The VMA policy is only applied for memory
 * allocations for a VMA in the VM.
 *
 * Currently there are a few corner cases in swapping where the policy
 * is not applied, but the majority should be handled. When process policy
 * is used it is not remembered over swap outs/swap ins.
 *
 * Only the highest zone in the zone hierarchy gets policied. Allocations
 * requesting a lower zone just use default policy. This implies that
 * on systems with highmem kernel lowmem allocation don't get policied.
 * Same with GFP_DMA allocations.
 *
 * For shmfs/tmpfs/hugetlbfs shared memory the policy is shared between
 * all users and remembered even when nobody has memory mapped.




This patch:

This is the core NUMA API code. This includes NUMA policy aware
wrappers for get_free_pages and alloc_page_vma(). On non NUMA kernels
these are defined away.

The system calls mbind (see http://www.firstfloor.org/~andi/mbind.html),
get_mempolicy (http://www.firstfloor.org/~andi/get_mempolicy.html) and
set_mempolicy (http://www.firstfloor.org/~andi/set_mempolicy.html) are
implemented here.

Adds a vm_policy field to the VMA and to the process. The process
also has field for interleaving. VMA interleaving uses the offset
into the VMA, but that's not possible for process allocations.

From: Andi Kleen <ak@muc.de>

  > Andi, how come policy_vma() calls ->set_policy under i_shared_sem?

  I think this can be actually dropped now.  In an earlier version I did
  walk the vma shared list to change the policies of other mappings to the
  same shared memory region.  This turned out too complicated with all the
  corner cases, so I eventually gave in and added ->get_policy to the fast
  path.  Also there is still the mmap_sem which prevents races in the same MM.
   

  Patch to remove it attached.  Also adds documentation and removes the
  bogus __alloc_page_vma() prototype noticed by hch.

From: Andi Kleen <ak@suse.de>

  A few incremental fixes for NUMA API.

  - Fix a few comments

  - Add a compat_ function for get_mem_policy I considered changing the
    ABI to avoid this, but that would have made the API too ugly.  I put it
    directly into the file because a mm/compat.c didn't seem worth it just for
    this.

  - Fix the algorithm for VMA interleave.

From: Matthew Dobson <colpatch@us.ibm.com>

  1) Move the extern of alloc_pages_current() into #ifdef CONFIG_NUMA.
    The only references to the function are in NUMA code in mempolicy.c

  2) Remove the definitions of __alloc_page_vma().  They aren't used.

  3) Move forward declaration of struct vm_area_struct to top of file.

From: Andi Kleen <ak@suse.de>

Add NUMA API system calls on IA64 and one bug fix required for it.

From: Andi Kleen <ak@suse.de>

Add NUMA API system calls for i386

From: Andi Kleen <ak@suse.de>

Add NUMA API system calls on x86-64

This includes a bugfix to prevent miscompilation on gcc 3.2 of bitmap.h

From: Hugh Dickins <hugh@veritas.com>

First of batch of six patches which introduce Rajesh Venkatasubramanian's
implementation of a radix priority search tree of vmas, to handle object-based
reverse mapping corner cases well.

rmap 14 i_shared_lock fixes

Start the sequence with a couple of outstanding i_shared_lock fixes.

Since i_shared_sem became i_shared_lock, we've had to shift and then
temporarily remove mremap move's protection of concurrent truncation - if
mremap moves ptes while unmap_mapping_range_list is making its way through the
vmas, there's a danger we'd move a pte from an area yet to be cleaned back
into an area already cleared.

Now site the i_shared_lock with the page_table_lock in move_one_page.  Replace
page_table_present by get_one_pte_map, so we know when it's necessary to
allocate a new page table: in which case have to drop i_shared_lock, trylock
and perhaps reorder locks on the way back.  Yet another fix: must check for
NULL dst before pte_unmap(dst).

And over in rmap.c, try_to_unmap_file's cond_resched amidst its lengthy
nonlinear swapping was now causing might_sleep warnings: moved to a rather
unsatisfactory and less frequent cond_resched_lock on i_shared_lock when we
reach the end of the list; and one before starting on the nonlinears too: the
"cursor" may become out-of-date if we do schedule, but I doubt it's worth
bothering about.

Having a semaphore in there causes modest performance regressions on heavily
mmap-intensive workloads on some hardware.  Specifically, up to 30% in SDET on
NUMAQ and big PPC64.

So switch it back to being a spinlock.  This does mean that unmap_vmas() needs
to be told whether or not it is allowed to schedule away; that's simple to do
via the zap_details structure.

This change means that there will be high scheuling latencies when someone
truncates a large file which is currently mmapped, but nobody does that
anyway.  The scheduling points in unmap_vmas() are mainly for munmap() and
exit(), and they still will work OK for that.

From: Hugh Dickins <hugh@veritas.com>

  Sorry, my premature optimizations (trying to pass down NULL zap_details
  except when needed) have caught you out doubly: unmap_mapping_range_list was
  NULLing the details even though atomic was set; and if it hadn't, then
  zap_pte_range would have missed free_swap_and_cache and pte_clear when pte
  not present.  Moved the optimization into zap_pte_range itself.  Plus
  massive documentation update.

From: Hugh Dickins <hugh@veritas.com>

  Here's a second patch to add to the first: mremap's cows can't come home
  without releasing the i_mmap_lock, better move the whole "Subtle point"
  locking from move_vma into move_page_tables.  And it's possible for the file
  that was behind an anonymous page to be truncated while we drop that lock,
  don't want to abort mremap because of VM_FAULT_SIGBUS.

  (Eek, should we be checking do_swap_page of a vm_file area against the
  truncate_count sequence?  Technically yes, but I doubt we need bother.)


- We cannot hold i_mmap_lock across move_one_page() because
  move_one_page() needs to perform __GFP_WAIT allocations of pagetable pages.

- Move the cond_resched() out so we test it once per page rather than only
  when move_one_page() returns -EAGAIN.

From: Hugh Dickins <hugh@veritas.com>

Delete include/asm*/rmap.h
Delete pte_addr_t typedef from include/asm*/pgtable.h
Delete KM_PTE2 from subset of include/asm*/kmap_types.h
Beware when 4G/4G returns to -mm: i386 may need KM_FILLER for 8K stack.

From: Hugh Dickins <hugh@veritas.com>

Remove the support for pte_chain rmap from page table initialization, just
continue to maintain nr_page_table_pages (but only for user page tables -
it also counted vmalloc page tables before, little need, and I'm unsure if
per-cpu stats are safe early enough on all arches).  mm/memory.c is the
only core file affected.

But ppc and ppc64 have found the old rmap page table initialization useful
to support their ptep_test_and_clear_young: so transfer rmap's
initialization to them (even on kernel page tables?  well, okay).

From: Hugh Dickins <hugh@veritas.com>

A weakness of the anonmm scheme is its difficulty in tracking pages shared
between two or more mms (one being an ancestor of the other), when mremap has
been used to move a range of pages in one of those mms.  mremap move is not
very common anyway, and it's more often used on a page range exclusive to the
mm; but uncommon though it may be, we must not allow unlocked pages to become
unswappable.

This patch follows Linus' suggestion, simply to take a private copy of the
page in such a case: early C-O-W.  My previous implementation was daft with
respect to pages currently on swap: it insisted on swapping them in to copy
them.  No need for that: just take the copy when a page is brought in from
swap, and its intended address is found to clash with what rmap has already
noted.

If do_swap_page has to make this copy in the mremap moved case (simply a call
to do_wp_page), might as well do so also in the case when it's a write access
but the page not exclusive, it's always seemed a little odd that swapin needed
a second fault for that.  A bug even: get_user_pages force imagines that a
single call to handle_mm_fault must break C-O-W.  Another bugfix: swapoff's
unuse_process didn't check is_vm_hugetlb_page.

Andrea's anon_vma has no such problem with mremap moved pages, handling them
with elegant use of vm_pgoff - though at some cost to vma merging.  How
important is it to handle them efficiently?  For now there's a msg
printk(KERN_WARNING "%s: mremap moved %d cows\n", current->comm, cows);