- 05 Jan, 2018 3 commits
-
-
Michael J. Ruhl authored
rdmavt has a down call to client drivers to retrieve a crafted card name. This name should be the IB defined name. Rather than craft the name each time it is needed, simply retrieve the IB allocated name from the IB device. Update the function name to reflect its application. Clean up driver code to match this change. Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
Michael J. Ruhl authored
Currently the HFI and QIB drivers allow the IB core to assign a unit number to the driver name string. If multiple devices exist in a system, there is a possibility that the device unit number and the IB core number will be mismatched. Fix by using the driver defined unit number to generate the device name. Reviewed-by:
-
Kaike Wan authored
When the rdmavt's RNRNAK timer is fired, it tries to cancel the timer by calling hrtimer_try_to_cancel(), which always returns -1 because the timer is currently running. This patch removes this useless call. Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
- 04 Jan, 2018 7 commits
-
-
Bart Van Assche authored
Eliminate the WARN_ONs that create following two warnings when registering an rxe device: WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core] CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_register_device+0x591/0x640 [ib_core] Call Trace: rxe_register_device+0x3c6/0x470 [rdma_rxe] rxe_add+0x543/0x5e0 [rdma_rxe] rxe_net_add+0x37/0xb0 [rdma_rxe] rxe_param_set_add+0x5a/0x120 [rdma_rxe] param_attr_store+0x5e/0xc0 module_attr_store+0x19/0x30 sysfs_kf_write+0x3d/0x50 kernfs_fop_write+0x116/0x1a0 __vfs_write+0x23/0x120 vfs_write+0xbe/0x1b0 SyS_write+0x44/0xa0 entry_SYSCALL_64_fastpath+0x23/0x9a WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core] CPU: 2 PID: 1005 Comm: run_tests Tainted: G W 4.15.0-rc4-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core] Call Trace: ib_register_device+0x3f7/0x640 [ib_core] rxe_register_device+0x3c6/0x470 [rdma_rxe] rxe_add+0x543/0x5e0 [rdma_rxe] rxe_net_add+0x37/0xb0 [rdma_rxe] rxe_param_set_add+0x5a/0x120 [rdma_rxe] param_attr_store+0x5e/0xc0 module_attr_store+0x19/0x30 sysfs_kf_write+0x3d/0x50 kernfs_fop_write+0x116/0x1a0 __vfs_write+0x23/0x120 vfs_write+0xbe/0x1b0 SyS_write+0x44/0xa0 entry_SYSCALL_64_fastpath+0x23/0x9a The code should accept either a parent pointer or a fully specified DMA specification without producing warnings. Fixes: 99db9494 ("IB/core: Remove ib_device.dma_device") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: stable@vger.kernel.org # v4.11 Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Mark Bloch authored
Unconditional locks/list and ODP srcu initialization should be done in the INIT stage. Remove those from the CAPS stage and move them to the proper stage. Signed-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
-
Mark Bloch authored
The loopback stage only initializes a lock, move it to be in the CAPS initialization phase and get rid loopback step completely. Signed-off-by:
-
Mark Bloch authored
Now that we have a stage just for hardware counters, move all relevant initialization logic into one place. Signed-off-by:
-
Mark Bloch authored
Now that we have a stage just for ODP, move all relevant initialization logic into one place. Signed-off-by:
-
Mark Bloch authored
Now that we have a stage just for RoCE/ETH, move all relevant initialization logic into one place. Signed-off-by:
-
Mark Bloch authored
Today we have single function which is used when we add an IB interface, break this function into multiple functions. Create stages and a generic mechanism to execute each stage. This is in preparation for RDMA/IB representors which might not need all stages or will do things differently in some of the stages. This patch doesn't change any functionality. Signed-off-by:
-
- 03 Jan, 2018 8 commits
-
-
Michael J. Ruhl authored
When debugging issues with RC QPs, it is useful to know if a QP has an associated RQ or SRQ, the size of the RQ, and any RNR timeout values. Add the necessary information to the QP stats output. Reviewed-by:
-
oulijun authored
It needs to create eight reserve QPs for resolving a bug of hip06. When deregistering mr, it will issue a rdma write for every reserve QPs. When modify qp from init to rtr, it needs to set the value of dest_qp_num. Otherwise, it will lead an error of freeing mr. Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Yixian Liu authored
The QP can accept send work requests only when the QP is in the states that allow them to be submitted. This patch updates the QP state judgement based on the specification. Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
Shaobo Xu <xushaobo2@huawei.com> Signed-off-by:
-
oulijun authored
When the length of sge is zero, the driver need to filter it Signed-off-by:
-
oulijun authored
This patch refactors the code of setting access flags for RDMA operation as well as adds the scene when attr->max_dest_rd_atomic is zero. Signed-off-by:
-
oulijun authored
This patch fixes the usage with sr_max filed and rr_max of qp context when modify qp. Its modifications include: 1. Adjust location of filling sr_max filed of qpc 2. Only assign the number of responder resource if IB_QP_MAX_DEST_RD_ATOMIC bit is set 3. Only assign the number of outstanding resource if IB_QP_MAX_QP_RD_ATOMIC 4. Fix the assgin algorithms for the field of sr_max and rr_max of qp context Signed-off-by:
Wei Hu (Xavier) <xavier.huwei@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
oulijun authored
This patch mainly implement rq inline data feature for hip08 RoCE in kernel mode. Signed-off-by:
-
Alex Estrin authored
If IB_CQ_REPORT_MISSED_EVENTS flag is passed in ib_req_notify_cq() it may return positive value indicating non-empty CQ. If return code not verified the log might be flooded with false warning messages "request notify on send CQ failed". Fixes: 8966e28d ("IB/ipoib: Use NAPI in UD/TX flows") Reviewed-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
-
- 02 Jan, 2018 10 commits
-
-
Leon Romanovsky authored
The commit 1a1c116f ("RDMA/netlink: Simplify the put_msg and put_attr") removes nlmsg_len calculation in ibnl_put_attr causing netlink messages and caused to miss source and destination addresses. Fixes: 1a1c116f ("RDMA/netlink: Simplify the put_msg and put_attr") Signed-off-by:
-
Leon Romanovsky authored
The NLDEV commands are using IB device indexes and names as a handle for netlink communications. Put all relevant code into one function to remove code duplication in followup patches. Reviewed-by:
-
Leon Romanovsky authored
There is an existing function to decrease reference counter of the device, let's use it. Reviewed-by:
-
Leon Romanovsky authored
The request_module() call is internally wrapped by CONFIG_MODULE, so there is no need to check it in our RDMA code too. Refactor to simplify the code. Reviewed-by:
-
Leon Romanovsky authored
The RXE driver is standalone module and hence doesn't need to export symbols, nor does this one line function deserve to be not inlined. Reviewed-by:
-
Himanshu Jha authored
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Signed-off-by:
-
Himanshu Jha authored
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by:
-
Himanshu Jha authored
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by:
Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by:
-
Himanshu Jha authored
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by:
-
Himanshu Jha authored
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by:
Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by:
-
- 29 Dec, 2017 2 commits
-
-
Bharat Potnuri authored
These prints not neccesarily mean error/warning, so changing them to debug. Signed-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
-
Yixian Liu authored
This patch adds more detailed comments when we call the memory barrier function, such as rmb, wmb and mb. Three mb() callers are deleted since they are unnecessary. Suggested-by:
-
- 28 Dec, 2017 10 commits
-
-
Yishai Hadas authored
This patch enables QP creation with a given BF index, this allows the user space driver to share same BF between few QPs or alternatively have a dedicated BF per QP. Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
This patch exposes the option to dynamic allocates a UAR, this functionality will be used in downstream patch in this series as part of QP creation. Specifically, the user space driver asks for a UAR allocation in a given page index, upon success this UAR and its bfregs can be used as part of QP creation by the user space driver. To enable allocating more than 256 UARs the page index is encoded in an extra one byte just after the command byte. Signed-off-by:
-
Yishai Hadas authored
This patch extends the alloc context flow to be prepared for working with dynamic UAR allocations. Currently upon alloc context there is some fix size of UARs that are allocated (named 'static allocation') and there is no option to user application to ask for more or control which UAR will be used by which QP. In this patch the driver prepares its data structures to manage both the static and the dynamic allocations and let the user driver knows about the max value of dynamic blue-flame registers that are allowed. Downstream patches from this series will enable the dynamic allocation and the association as part of QP creation. Signed-off-by:
-
Maor Gottlieb authored
Add missing inner RSS support capability as part of the RSS supported fields. In addition change MLX5_RX_HASH_INNER to 1UL << 31 in order to define it as unsigned. Fixes: 309fa347 ("IB/mlx5: Add support for RSS on the inner packet") Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
-
Guy Levi authored
Support RSS hash for inner headers according to a new flag, MLX4_IB_RX_HASH_INNER provided by the vendor channel. In case the flag is set, RSS hash will be done on the inner headers of VXLAN packets (which are encapsulated). Non-encapsulated packets will be hashed according to the outer headers. Signed-off-by:
Guy Levi <guyle@mellanox.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.gitJason Gunthorpe authored
Patches for 4.16 that are dependent on patches sent to 4.15-rc. These are small clean ups for the vmw_pvrdma and i40iw drivers. * 'from-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git: RDMA/vmw_pvrdma: Remove usage of BIT() from UAPI header RDMA/vmw_pvrdma: Use refcount_t instead of atomic_t RDMA/vmw_pvrdma: Use more specific sizeof in kcalloc RDMA/vmw_pvrdma: Clarify QP and CQ is_kernel logic RDMA/vmw_pvrdma: Add UAR SRQ macros in ABI header file i40iw: Change accelerated flag to bool
-
Bryan Tan authored
BIT() should not be used in the UAPI header. Remove it. Signed-off-by:
Bryan Tan <bryantan@vmware.com> Signed-off-by:
-
Bryan Tan authored
refcount_t is the preferred type for refcounts. Change the QP and CQ refcnt fields to use refcount_t. Reviewed-by:
Adit Ranadive <aditr@vmware.com> Reviewed-by:
Aditya Sarwade <asarwade@vmware.com> Reviewed-by:
Jorgen Hansen <jhansen@vmware.com> Signed-off-by:
-
Bryan Tan authored
Convert the sizeof(void *) in two kcalloc calls to be more specific for the arrays that are being allocated. Reviewed-by:
-
Bryan Tan authored
Be more consistent in setting and checking is_kernel flag for QPs and CQs. Reviewed-by:
-
