- 19 Mar, 2019 14 commits
-
-
Himanshu Madhani authored
This version includes support for ISP28XX. Signed-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Michael Hernandez authored
This patch adds support for Secure flash update with ISP28xx. Signed-off-by:
Michael Hernandez <mhernandez@marvell.com> Signed-off-by:
-
Joe Carnuccio authored
Includes the following: - correction to 27xx image status struct; - factoring of 27xx image status validating routines to make common; - image status generation compare that works across zero wrap; - bsg interface to report current active images (as loaded by driver). Signed-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Joe Carnuccio authored
Reduce stack space on each fwdt routine by eliminating local variable reg. Signed-off-by:
-
Joe Carnuccio authored
This patch cleans up and fixes firmware dump template processing. These changes are added to support newer features for ISP27XX/ISP28XX. Signed-off-by:
-
Joe Carnuccio authored
This patch makes following changes to flash access routines: - update return type for read_optrom - use void instead of uint32_t * for buffer parameter in read and write optrom routines - fix flash/nvram addressing Signed-off-by:
-
Joe Carnuccio authored
This patch adds multipe firmware dump template and segments support for ISP27XX/28XX. Signed-off-by:
-
Joe Carnuccio authored
This patch does following: - Clean up NVRAM code. - Optimizes reading of primary/secondary flash image validation. - Remove 0xff mask and make correct width in FLT structure. - Use endian macros to assign static fields in fwdump header. - Correct fdwt checksum calculation. - Simplify ql_dump_buffer() interface usage. - Add endianizers to 27xx firmware image validator. - fixes compiler warnings for big endian architecture. Signed-off-by:
-
Joe Carnuccio authored
This patch fixes reported speed for min_link and max_supported speed. Also rename sysfs nodes link_speed and max_supported to be consistent with {min|max}_suuported_speed. Signed-off-by: -
Joe Carnuccio authored
This patch adds sysfs node for serdes_version and also cleans up port_speed display. Signed-off-by:
-
Joe Carnuccio authored
This patch adds PCI device ID ISP28XX for Gen7 support. Also signature determination for primary/secondary flash image for ISP27XX/28XX is aded as part of Gen7 support. Signed-off-by:
-
Joe Carnuccio authored
This patch fixes qla27xx_dump_{mpi|ram} api for ISP27XX. Signed-off-by: -
Joe Carnuccio authored
This patch removes FW default template as there will never be case where the default template would be invoked. Signed-off-by:
-
Joe Carnuccio authored
This patch adds new sysfs node to display firmware attributes and port number. Signed-off-by:
-
- 18 Mar, 2019 16 commits
-
-
Suganath Prabu authored
Updated driver version to 28.100.00.00, which is equivalent to OOB Phase 9. Signed-off-by:
Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Suganath Prabu authored
* Reduce the threshold value to 1/4 of the queue depth. * With this FW can find enough entries to post the Reply Descriptors in the reply descriptor post queue. * With module param, user can play with threshold value, the same irqpoll_weight is used as the budget in processing of reply descriptor post queues in _base_process_reply_queue. Signed-off-by:
-
Suganath Prabu authored
Driver uses "reply descriptor post queues" in round robin fashion so that IO's are distributed to all the available reply descriptor post queues equally. With this each reply descriptor post queue load is balanced. This is enabled only if CPUs count to MSI-X vector count ratio is X:1 (where X > 1) This improves performance and also fixes soft lockups. Signed-off-by:
-
Suganath Prabu authored
Issue Description: We have seen cpu lock up issue from fields if system has greater (more than 96) logical cpu count. SAS3.0 controller (Invader series) supports at max 96 msix vector and SAS3.5 product (Ventura) supports at max 128 msix vectors. This may be a generic issue (if PCI device supports completion on multiple reply queues). Let me explain it w.r.t to mpt3sas supported h/w just to simplify the problem and possible changes to handle such issues. IT HBA (mpt3sas) supports multiple reply queues in completion path. Driver creates MSI-x vectors for controller as "min of (FW supported Reply queue, Logical CPUs)". If submitter is not interrupted via completion on same CPU, there is a loop in the IO path. This behavior can cause hard/soft CPU lockups, IO timeout, system sluggish etc. Example - one CPU (e.g. CPU A) is busy submitting the IOs and another CPU (e.g. CPU B) is busy with processing the corresponding IO's reply descriptors from reply descriptor queue upon receiving the interrupts from HBA. If the CPU A is continuously pumping the IOs then always CPU B (which is executing the ISR) will see the valid reply descriptors in the reply descriptor queue and it will be continuously processing those reply descriptor in a loop without quitting the ISR handler. Mpt3sas driver will exit ISR handler if it finds unused reply descriptor in the reply descriptor queue. Since CPU A will be continuously sending the IOs, CPU B may always see a valid reply descriptor (posted by HBA Firmware after processing the IO) in the reply descriptor queue. In worst case, driver will not quit from this loop in the ISR handler. Eventually, CPU lockup will be detected by watchdog. Above mentioned behavior is not common if "rq_affinity" set to 2 or affinity_hint is honored by irqbalance as "exact". If rq_affinity is set to 2, submitter will be always interrupted via completion on same CPU. If irqbalance is using "exact" policy, interrupt will be delivered to submitter CPU. If CPU counts to MSI-X vectors (reply descriptor Queues) count ratio is not 1:1, we still have exposure of issue explained above and for that we don't have any solution. Exposure of soft/hard lockup if CPU count is more than MSI-x supported by device. If CPUs count to MSI-x vectors count ratio is not 1:1, (Other way, if CPU counts to MSI-x vector count ratio is something like X:1, where X > 1) then 'exact' irqbalance policy OR rq_affinity = 2 won't help to avoid CPU hard/soft lockups. There won't be any one to one mapping between CPU to MSI-x vector instead one MSI-x interrupt (or reply descriptor queue) is shared with group/set of CPUs and there is a possibility of having a loop in the IO path within that CPU group and may observe lockups. For example: Consider a system having two NUMA nodes and each node having four logical CPUs and also consider that number of MSI-x vectors enabled on the HBA is two, then CPUs count to MSI-x vector count ratio as 4:1. e.g. MSIx vector 0 is affinity to CPU 0, CPU 1, CPU 2 & CPU 3 of NUMA node 0 and MSI-x vector 1 is affinity to CPU 4, CPU 5, CPU 6 & CPU 7 of NUMA node 1. numactl --hardware available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 --> MSI-x 0 node 0 size: 65536 MB node 0 free: 63176 MB node 1 cpus: 4 5 6 7 -->MSI-x 1 node 1 size: 65536 MB node 1 free: 63176 MB Assume that user started an application which uses all the CPUs of NUMA node 0 for issuing the IOs. Only one CPU from affinity list (it can be any cpu since this behavior depends upon irqbalance) CPU0 will receive the interrupts from MSIx vector 0 for all the IOs. Eventually, CPU 0 IO submission percentage will be decreasing and ISR processing percentage will be increasing as it is more busy with processing the interrupts. Gradually IO submission percentage on CPU 0 will be zero and it's ISR processing percentage will be 100 percentage as IO loop has already formed within the NUMA node 0, i.e. CPU 1, CPU 2 & CPU 3 will be continuously busy with submitting the heavy IOs and only CPU 0 is busy in the ISR path as it always find the valid reply descriptor in the reply descriptor queue. Eventually, we will observe the hard lockup here. Chances of occurring of hard/soft lockups are directly proportional to value of X. If value of X is high, then chances of observing CPU lockups is high. Solution: Use IRQ poll interface defined in " irq_poll.c". mpt3sas driver will execute ISR routine in Softirq context and it will always quit the loop based on budget provided in IRQ poll interface. In these scenarios (i.e. where CPUs count to MSI-X vectors count ratio is X:1 (where X > 1)), IRQ poll interface will avoid CPU hard lockups due to voluntary exit from the reply queue processing based on budget. Note - Only one MSI-x vector is busy doing processing. Irqstat output: IRQs / 1 second(s) IRQ# TOTAL NODE0 NODE1 NODE2 NODE3 NAME 44 122871 122871 0 0 0 IR-PCI-MSI-edge mpt3sas0-msix0 45 0 0 0 0 0 IR-PCI-MSI-edge mpt3sas0-msix1 We use this approach only if cpu count is more than FW supported MSI-x vector Signed-off-by:
-
Suganath Prabu authored
Separate out processing of reply descriptor post queue from _base_interrupt to _base_process_reply_queue. Signed-off-by:
-
Suganath Prabu authored
Fixed typo in request_desript_type. request_desript_type --> request_descript_type. Signed-off-by:
-
Alan Adamson authored
The product_id and revision attributes will allow for the modification of the T10 Model and Revision strings returned in inquiry responses. Its value can be viewed and modified via the ConfigFS path at: target/core/$backstore/$name/wwn/product_id target/core/$backstore/$name/wwn/revision [mkp: dropped parentheses as requested by Bart] Signed-off-by:
Alan Adamson <alan.adamson@oracle.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Don Brace authored
Reviewed-by:
Gerry Morong <gerry.morong@microsemi.com> Reviewed-by:
David Carroll <david.carroll@microsemi.com> Reviewed-by:
Scott Benesh <scott.benesh@microsemi.com> Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Don Brace authored
Reviewed-by:
-
Don Brace authored
Reviewed-by:
-
Ajish Koshy authored
Reviewed-by:
Ajish Koshy <ajish.koshy@microsemi.com> Signed-off-by:
-
Kevin Barnett authored
Reviewed-by:
-
Don Brace authored
Reviewed-by:
-
Don Brace authored
There are times when a TUR can take longer than the DEFAULT_TIMEOUT value. The timeout code is not correct as the function exits with an automatic as the completion variable...To be fixed later. Remove the TUR timeout. Reviewed-by:
-
Don Brace authored
Correct a 'rare' race condition where a disk is failed after a device list has been obtained from the controller and before attempting to get the device id. Reviewed-by:
-
Don Brace authored
Multipath failures are normally detected at the frequency of the event thread. Detect LUN failures earlier by checking request completion status. Reviewed-by:
Bader Ali-saleh <bader.ali-saleh@microsemi.com> Reviewed-by:
Prasad Munirathnam <Prasad.Munirathnam@microsemi.com> Reviewed-by:
-
- 17 Mar, 2019 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 asm updates from Thomas Gleixner: "Two cleanup patches removing dead conditionals and unused code" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Remove unused __constant_c_x_memset() macro and inlines x86/asm: Remove dead __GNUC__ conditionals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Three fixes for the fallout from the TSX errata workaround: - Prevent memory corruption caused by a unchecked out of bound array index. - Two trivial fixes to address compiler warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Make dev_attr_allow_tsx_force_abort static perf/x86: Fixup typo in stub functions perf/x86/intel: Fix memory corruption -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "A fix for a Xen bug introduced by David's series for excluding ballooned pages in vmcores" * tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Fix mapping PG_offline pages to user space
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "Here is a 9p update for 5.1; there honestly hasn't been much. Two fixes (leak on invalid mount argument and possible deadlock on i_size update on 32bit smp) and a fall-through warning cleanup" * tag '9p-for-5.1' of git://github.com/martinetd/linux: 9p/net: fix memory leak in p9_client_create 9p: use inode->i_lock to protect i_size_write() under 32-bit 9p: mark expected switch fall-through
-
kbuild test robot authored
Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
-
Masahiro Yamada authored
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: -
Masahiro Yamada authored
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
