This patch added a new member csum_reqd in struct mptcp_out_options and
struct mptcp_subflow_request_sock. Initialized it with the helper
function mptcp_is_checksum_enabled().

In mptcp_write_options, if this field is enabled, send out the MP_CAPABLE
suboption with the MPTCP_CAP_CHECKSUM_REQD flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch added a new member named csum in struct mptcp_ext, implemented
a new function named mptcp_generate_data_checksum().

Generate the data checksum in mptcp_sendmsg_frag, save it in mpext->csum.

Note that we must generate the csum for zero window probe, too.

Do the csum update incrementally, to avoid multiple csum computation
when the data is appended to existing skb.

Note that in a later patch we will skip unneeded csum related operation.
Changes not included here to keep the delta small.
Co-developed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch added a new member named csum_enabled in struct mptcp_sock,
used a dummy mptcp_is_checksum_enabled() helper to initialize it.

Also added a new member named mptcpi_csum_enabled in struct mptcp_info
to expose the csum_enabled flag.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrea Mayer says:

====================
seg6: add support for SRv6 End.DT46 Behavior

SRv6 End.DT46 Behavior is defined in the IETF RFC 8986 [1] along with SRv6
End.DT4 and End.DT6 Behaviors.

The proposed End.DT46 implementation is meant to support the decapsulation
of both IPv4 and IPv6 traffic coming from a *single* SRv6 tunnel.
The SRv6 End.DT46 Behavior greatly simplifies the setup and operations of
SRv6 VPNs in the Linux kernel.

 - patch 1/2 is the core patch that adds support for the SRv6 End.DT46
   Behavior;

 - patch 2/2 adds the selftest for SRv6 End.DT46 Behavior.

The patch introducing the new SRv6 End.DT46 Behavior in iproute2 will
follow shortly.

Comments, suggestions and improvements are very welcome as always!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

this selftest is designed for evaluating the new SRv6 End.DT46 Behavior
used, in this example, for implementing IPv4/IPv6 L3 VPN use cases.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Signed-off-by: Paolo Lungaroni <paolo.lungaroni@uniroma2.it>
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IETF RFC 8986 [1] includes the definition of SRv6 End.DT4, End.DT6, and
End.DT46 Behaviors.

The current SRv6 code in the Linux kernel only implements End.DT4 and
End.DT6 which can be used respectively to support IPv4-in-IPv6 and
IPv6-in-IPv6 VPNs. With End.DT4 and End.DT6 it is not possible to create a
single SRv6 VPN tunnel to carry both IPv4 and IPv6 traffic.

The proposed End.DT46 implementation is meant to support the decapsulation
of IPv4 and IPv6 traffic coming from a single SRv6 tunnel.
The implementation of the SRv6 End.DT46 Behavior in the Linux kernel
greatly simplifies the setup and operations of SRv6 VPNs.

The SRv6 End.DT46 Behavior leverages the infrastructure of SRv6 End.DT{4,6}
Behaviors implemented so far, because it makes use of a VRF device in
order to force the routing lookup into the associated routing table.

To make the End.DT46 work properly, it must be guaranteed that the routing
table used for routing lookup operations is bound to one and only one VRF
during the tunnel creation. Such constraint has to be enforced by enabling
the VRF strict_mode sysctl parameter, i.e.:

 $ sysctl -wq net.vrf.strict_mode=1

Note that the same approach is used for the SRv6 End.DT4 Behavior and for
the End.DT6 Behavior in VRF mode.

The command used to instantiate an SRv6 End.DT46 Behavior is
straightforward, i.e.:

 $ ip -6 route add 2001:db8::1 encap seg6local action End.DT46 vrftable 100 dev vrf100.

[1] https://www.rfc-editor.org/rfc/rfc8986.html#name-enddt46-decapsulation-and-s

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Performance and impact of SRv6 End.DT46 Behavior on the SRv6 Networking
=======================================================================

This patch aims to add the SRv6 End.DT46 Behavior with minimal impact on
the performance of SRv6 End.DT4 and End.DT6 Behaviors.
In order to verify this, we tested the performance of the newly introduced
SRv6 End.DT46 Behavior and compared it with the performance of SRv6
End.DT{4,6} Behaviors, considering both the patched kernel and the kernel
before applying the End.DT46 patch (referred to as vanilla kernel).

In details, the following decapsulation scenarios were considered:

 1.a) IPv6 traffic in SRv6 End.DT46 Behavior on patched kernel;
 1.b) IPv4 traffic in SRv6 End.DT46 Behavior on patched kernel;
 2.a) SRv6 End.DT6 Behavior (VRF mode) on patched kernel;
 2.b) SRv6 End.DT4 Behavior on patched kernel;
 3.a) SRv6 End.DT6 Behavior (VRF mode) on vanilla kernel (without the
      End.DT46 patch);
 3.b) SRv6 End.DT4 Behavior on vanilla kernel (without the End.DT46 patch).

All tests were performed on a testbed deployed on the CloudLab [2]
facilities. We considered IPv{4,6} traffic handled by a single core (at 2.4
GHz on a Xeon(R) CPU E5-2630 v3) on kernel 5.13-rc1 using packets of size
~ 100 bytes.

Scenario (1.a): average 684.70 kpps; std. dev. 0.7 kpps;
Scenario (1.b): average 711.69 kpps; std. dev. 1.2 kpps;
Scenario (2.a): average 690.70 kpps; std. dev. 1.2 kpps;
Scenario (2.b): average 722.22 kpps; std. dev. 1.7 kpps;
Scenario (3.a): average 690.02 kpps; std. dev. 2.6 kpps;
Scenario (3.b): average 721.91 kpps; std. dev. 1.2 kpps;

Considering the results for the patched kernel (1.a, 1.b, 2.a, 2.b) we
observe that the performance degradation incurred in using End.DT46 rather
than End.DT6 and End.DT4 respectively for IPv6 and IPv4 traffic is minimal,
around 0.9% and 1.5%. Such very minimal performance degradation is the
price to be paid if one prefers to use a single tunnel capable of handling
both types of traffic (IPv4 and IPv6).

Comparing the results for End.DT4 and End.DT6 under the patched and the
vanilla kernel (2.a, 2.b, 3.a, 3.b) we observe that the introduction of the
End.DT46 patch has no impact on the performance of End.DT4 and End.DT6.

[2] https://www.cloudlab.usSigned-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the '.. code-block:: none' to properly highlight the documented DSDT
entries. This also fixes warnings in the documentation build process.

Fixes: e71305ac ("Documentation: ACPI: DSD: Document MDIO PHY")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Include the new phy.rst into the index of the ACPI support
documentation.

Fixes: e71305ac ("Documentation: ACPI: DSD: Document MDIO PHY")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The continue statement at the end of a for-loop has no effect,
invert the if expression and remove the continue.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink_trap tests for the netdevsim fail due to misspelled
debugfs file name. Change this name, as well as name of callback
function, to match the naming as in the devlink itself - 'trap_drop_counter'.

Test-results:
selftests: drivers/net/netdevsim: devlink_trap.sh
TEST: Initialization                                                [ OK ]
TEST: Trap action                                                   [ OK ]
TEST: Trap metadata                                                 [ OK ]
TEST: Non-existing trap                                             [ OK ]
TEST: Non-existing trap action                                      [ OK ]
TEST: Trap statistics                                               [ OK ]
TEST: Trap group action                                             [ OK ]
TEST: Non-existing trap group                                       [ OK ]
TEST: Trap group statistics                                         [ OK ]
TEST: Trap policer                                                  [ OK ]
TEST: Trap policer binding                                          [ OK ]
TEST: Port delete                                                   [ OK ]
TEST: Device delete                                                 [ OK ]

Fixes: a7b3527a ("drivers: net: netdevsim: add devlink trap_drop_counter_get implementation")
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2021-06-17

This series contains updates to ice driver only.

Jake corrects a couple of entries in the PTYPE table to properly
reflect the datasheet and removes unneeded NULL checks for some
PTP calls.

Paul reduces the scope of variables and removes the use of a local
variable.

Shaokun Zhang removes a duplicate function declaration.

Lorenzo Bianconi fixes a compilation warning if PTP_1588_CLOCK is
disabled.

Colin Ian King changes a for loop to remove an unneeded 'continue'.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Guangbin Huang says:

====================
net: hdlc_ppp: clean up some code style issues

This patchset clean up some code style issues.

---
Change Log：
V1 -> V2:
1. remove patch "net: hdlc_ppp: fix the comments style issue" and
patch "net: hdlc_ppp: remove redundant spaces" from this patchset.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add space required after that ','.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes unnecessary out of memory message,
to fix the following checkpatch.pl warning:
"WARNING: Possible unnecessary 'out of memory' message"
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Should not use assignment in if condition.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the checkpatch error as "foo* bar" or "foo*bar" should be "foo *bar".
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the checkpatch error about missing a blank line
after declarations.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes some redundant blank lines.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ioana Ciornei says:

====================
net: mdio: setup both fwnode and of_node

The first patch in this series fixes a bug introduced by mistake in the
previous ACPI MDIO patch set.

The next two patches are adding a new helper which takes a device and a
fwnode_handle and populates both the of_node and fwnode so that we make
sure that a bug like this does not happen anymore.
Also, the new helper is used in the MDIO area.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the newly introduced helper to setup both the of_node and the
fwnode for a given device.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There are many places where both the fwnode_handle and the of_node of a
device need to be populated. Add a function which does both so that we
have consistency.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

By mistake, the of_node of the MDIO device was not setup in the patch
linked below. As a consequence, any PHY driver that depends on the
of_node in its probe callback was not be able to successfully finish its
probe on a PHY, thus the Generic PHY driver was used instead.

Fix this by actually setting up the of_node.

Fixes: bc1bee3b ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Store the information of the pipes to avoid calling usb_rcvctrlpipe(),
usb_sndctrlpipe(), usb_rcvbulkpipe(), usb_sndbulkpipe(), and
usb_rcvintpipe() frequently.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2021-06-17

The following pull-request contains BPF updates for your *net-next* tree.

We've added 50 non-merge commits during the last 25 day(s) which contain
a total of 148 files changed, 4779 insertions(+), 1248 deletions(-).

The main changes are:

1) BPF infrastructure to migrate TCP child sockets from a listener to another
   in the same reuseport group/map, from Kuniyuki Iwashima.

2) Add a provably sound, faster and more precise algorithm for tnum_mul() as
   noted in https://arxiv.org/abs/2105.05398, from Harishankar Vishwanathan.

3) Streamline error reporting changes in libbpf as planned out in the
   'libbpf: the road to v1.0' effort, from Andrii Nakryiko.

4) Add broadcast support to xdp_redirect_map(), from Hangbin Liu.

5) Extends bpf_map_lookup_and_delete_elem() functionality to 4 more map
   types, that is, {LRU_,PERCPU_,LRU_PERCPU_,}HASH, from Denis Salopek.

6) Support new LLVM relocations in libbpf to make them more linker friendly,
   also add a doc to describe the BPF backend relocations, from Yonghong Song.

7) Silence long standing KUBSAN complaints on register-based shifts in
   interpreter, from Daniel Borkmann and Eric Biggers.

8) Add dummy PT_REGS macros in libbpf to fail BPF program compilation when
   target arch cannot be determined, from Lorenz Bauer.

9) Extend AF_XDP to support large umems with 1M+ pages, from Magnus Karlsson.

10) Fix two minor libbpf tc BPF API issues, from Kumar Kartikeya Dwivedi.

11) Move libbpf BPF_SEQ_PRINTF/BPF_SNPRINTF macros that can be used by BPF
    programs to bpf_helpers.h header, from Florent Revest.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Esben Haabendal says:

====================
net: gianfar: 64-bit statistics and rx_missed_errors counter

This series replaces the legacy 32-bit statistics to proper 64-bit ditto,
and implements rx_missed_errors counter on top of that.

The device supports a 16-bit RDRP counter, and a related carry bit and
interrupt, which allows implementation of a robust 64-bit counter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Devices with RMON support has a 16-bit RDRP counter.  It provides: "Receive
dropped packets counter. Increments for frames received which are streamed
to system but are later dropped due to lack of system resources."

To handle more than 2^16 dropped packets, a carry bit in CAR1 register is
set on overflow, so we enable irq when this is set, extending the counter
to 2^64 for handling situations where lots of packets are missed (e.g.
during heavy network storms).
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These are for carry status and interrupt mask bits of statistics registers.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The memset on CAMx is wrong, as it actually unmasks all carry irq's,
which we clearly are not interested in.

The memset on CARx registers is just pointless, as they are W1C.

So let's just stop the memset before CAR1.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The CAR1 and CAR2 registers are W1C style registers, to the memset does not
actually clear them.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No reason to wrap counter values at 2^32.  Especially the bytes counters
can wrap pretty fast on Gbit networks.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No reason to produce the legacy net_device_stats struct, only to have it
converted to rtnl_link_stats64.  And as a bonus, this allows for improving
counter size to 64 bit.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When nla_put_u32() fails, 'ret' could be 0, it should
return error code in tcf_del_walker().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. of_node_put() on it before exiting
this function.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Th_strings arrays netdev_features_strings, tunable_strings, and
phy_tunable_strings has been moved to file net/ethtool/common.c.
So fixes the comment.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes: 66826c43 ("documentation: networking: devlink: add prestera switched driver Documentation")
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently the check for the u16 variable val being less than zero is
always false because val is unsigned. Fix this by using the int
variable for the assignment and less than zero check.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: f7380bba ("net: pcs: xpcs: add support for NXP SJA1110")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The continue statement in the for-loop is redundant. Re-work the hw_lock
check to remove it.

Addresses-Coverity: ("Continue has no effect")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Fix the following compilation warning if PTP_1588_CLOCK is not enabled

drivers/net/ethernet/intel/ice/ice_ptp.h:149:1:
   error: return type defaults to ‘int’ [-Werror=return-type]
   ice_ptp_request_ts(struct ice_ptp_tx *tx, struct sk_buff *skb)

Fixes: ea9b847c ("ice: enable transmit timestamps for E810 devices")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

The ptp_read_system_prets and ptp_read_system_postts functions already
check for the NULL value of the ptp_system_timestamp structure pointer.
There is no need to check this manually in the ice driver code. Remove
the checks.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Function 'ice_is_vsi_valid' is declared twice, remove the
repeated declaration.

Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>