Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt patches for 5.15-rc1.

  Nothing huge in here, just lots of constant forward progress on a
  number of different drivers and hardware support:

   - more USB 4/Thunderbolt support added

   - dwc3 driver updates and additions

   - usb gadget fixes and addtions for new types

   - udc gadget driver updates

   - host controller updates

   - removal of obsolete drivers

   - other minor driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits)
  usb: isp1760: otg control register access
  usb: isp1760: use the right irq status bit
  usb: isp1760: write to status and address register
  usb: isp1760: fix qtd fill length
  usb: isp1760: fix memory pool initialization
  usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least"
  usb: dwc2: Fix spelling mistake "was't" -> "wasn't"
  usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed"
  usb: host: xhci-rcar: Don't reload firmware after the completion
  usb: xhci-mtk: allow bandwidth table rollover
  usb: mtu3: fix random remote wakeup
  usb: mtu3: return successful suspend status
  usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint
  usb: xhci-mtk: modify the SOF/ITP interval for mt8195
  usb: xhci-mtk: add a member of num_esit
  usb: xhci-mtk: check boundary before check tt
  usb: xhci-mtk: update fs bus bandwidth by bw_budget_table
  usb: xhci-mtk: fix issue of out-of-bounds array access
  usb: xhci-mtk: support option to disable usb2 ports
  usb: xhci-mtk: fix use-after-free of mtk->hcd
  ...

Pull tty / serial updates from Greg KH:
 "Here is the "big" set of tty/serial driver patches for 5.15-rc1

  Nothing major in here at all, just some driver updates and more
  cleanups on old tty apis and code that needed it that includes:

   - tty.h cleanup of things that didn't belong in it

   - other tty cleanups by Jiri

   - driver cleanups

   - rs485 support added to amba-pl011 driver

   - dts updates

   - stm32 serial driver updates

   - other minor fixes and driver updates

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
  tty: serial: uartlite: Use read_poll_timeout for a polling loop
  tty: serial: uartlite: Use constants in early_uartlite_putc
  tty: Fix data race between tiocsti() and flush_to_ldisc()
  serial: vt8500: Use of_device_get_match_data
  serial: tegra: Use of_device_get_match_data
  serial: 8250_ingenic: Use of_device_get_match_data
  tty: serial: linflexuart: Remove redundant check to simplify the code
  tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
  tty: serial: fsl_lpuart: enable two stop bits for lpuart32
  tty: serial: fsl_lpuart: fix the wrong mapbase value
  mxser: use semi-colons instead of commas
  tty: moxa: use semi-colons instead of commas
  tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
  tty: replace in_irq() with in_hardirq()
  serial: sh-sci: fix break handling for sysrq
  serial: stm32: use devm_platform_get_and_ioremap_resource()
  serial: stm32: use the defined variable to simplify code
  Revert "arm pl011 serial: support multi-irq request"
  tty: serial: samsung: Add Exynos850 SoC data
  tty: serial: samsung: Fix driver data macros style
  ...

Pull IIO and staging driver updates from Greg KH:
 "Here is the big set of staging and IIO driver updates for 5.15-rc1.
  Also included in here are the counter driver subsystem updates as the
  IIO drivers needed them.

  Lots of churn in some staging drivers, we dropped the "old" rtl8188eu
  driver and replaced it with a newer version of the driver that had
  been maintained out-of-tree by Larry with the end goal of actually
  being able to get this driver out of staging eventually. Despite that
  driver being "newer" the line count of this pull request is going up.

  Some drivers moved out of staging as well, which is always nice to
  see, that is why there are additions to the mfc and misc driver
  subsystems. All of these were acked by the various subsystem
  maintainers involved.

  But by far, as normal, it's coding style cleanups all over the
  drivers/staging/ tree in here.

  Full details of these changes are in the shortlog.

  All of these have been in linux-next for a while with no reported
  problems"

[ Note: the r8188eu merge clashed with commit 89939e89 ("staging:
  rtlwifi: use siocdevprivate") from the networking tree. When resolving
  the issue, I noted that the whole r8188eu rtw_android code is dead
  since commit ae7471ca ("staging: r8188eu: remove rtw_ioctl
  function").

  End result: the merge resolution was to throw all of that away,
  rather than do the mindless fixup to code that isn't actually
  reachable                                               - Linus ]

* tag 'staging-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (551 commits)
  staging: vt6655: Remove filenames in files
  staging: r8188eu: add extra TODO entries
  staging: vt6656: Remove filenames in files
  staging: wlan-ng: fix invalid assignment warning
  staging: r8188eu: rename fields of struct rtl_ps
  staging: r8188eu: remove ODM_DynamicPrimaryCCA_DupRTS()
  staging: r8188eu: rename fields of struct dyn_primary_cca
  staging: r8188eu: rename struct field Wifi_Error_Status
  staging: r8188eu: Provide a TODO file for this driver
  staging: r8188eu: remove unneeded variable
  staging: r8188eu: remove unneeded conversions to bool
  staging: r8188eu: remove {read,write}_macreg
  staging: r8188eu: core: remove condition with no effect
  staging: r8188eu: remove ethernet.h header file
  staging: r8188eu: remove ip.h header file
  staging: r8188eu: remove if_ether.h header file
  staging: r8188eu: make rtw_deinit_intf_priv return void
  staging: r8188eu: use is_multicast_ether_addr in os_dep/recv_linux.c
  staging: r8188eu: use is_multicast_ether_addr in hal/rtl8188eu_xmit.c
  staging: r8188eu: use is_multicast_ether_addr in core/rtw_xmit.c
  ...

Merge tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the big set of driver core patches for 5.15-rc1.

  These do change a number of different things across different
  subsystems, and because of that, there were 2 stable tags created that
  might have already come into your tree from different pulls that did
  the following

   - changed the bus remove callback to return void

   - sysfs iomem_get_mapping rework

  Other than those two things, there's only a few small things in here:

   - kernfs performance improvements for huge numbers of sysfs users at
     once

   - tiny api cleanups

   - other minor changes

  All of these have been in linux-next for a while with no reported
  problems, other than the before-mentioned merge issue"

* tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits)
  MAINTAINERS: Add dri-devel for component.[hc]
  driver core: platform: Remove platform_device_add_properties()
  ARM: tegra: paz00: Handle device properties with software node API
  bitmap: extend comment to bitmap_print_bitmask/list_to_buf
  drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI
  topology: use bin_attribute to break the size limitation of cpumap ABI
  lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases
  cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list
  sysfs: Rename struct bin_attribute member to f_mapping
  sysfs: Invoke iomem_get_mapping() from the sysfs open callback
  debugfs: Return error during {full/open}_proxy_open() on rmmod
  zorro: Drop useless (and hardly used) .driver member in struct zorro_dev
  zorro: Simplify remove callback
  sh: superhyway: Simplify check in remove callback
  nubus: Simplify check in remove callback
  nubus: Make struct nubus_driver::remove return void
  kernfs: dont call d_splice_alias() under kernfs node lock
  kernfs: use i_lock to protect concurrent inode updates
  kernfs: switch kernfs to use an rwsem
  kernfs: use VFS negative dentry caching
  ...

Pull char / misc driver updates from Greg KH:
 "Here is the big set of char/misc driver changes for 5.15-rc1.

  Lots of different driver subsystems are being updated in here,
  notably:

   - mhi subsystem update

   - fpga subsystem update

   - coresight/hwtracing subsystem update

   - interconnect subsystem update

   - nvmem subsystem update

   - parport drivers update

   - phy subsystem update

   - soundwire subsystem update

  and there are some other char/misc drivers being updated as well:

   - binder driver additions

   - new misc drivers

   - lkdtm driver updates

   - mei driver updates

   - sram driver updates

   - other minor driver updates.

  Note, there are no habanalabs driver updates in this pull request,
  that will probably come later before -rc1 is out in a different
  request.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
  Revert "bus: mhi: Add inbound buffers allocation flag"
  misc/pvpanic: fix set driver data
  VMCI: fix NULL pointer dereference when unmapping queue pair
  char: mware: fix returnvar.cocci warnings
  parport: remove non-zero check on count
  soundwire: cadence: do not extend reset delay
  soundwire: intel: conditionally exit clock stop mode on system suspend
  soundwire: intel: skip suspend/resume/wake when link was not started
  soundwire: intel: fix potential race condition during power down
  phy: qcom-qmp: Add support for SM6115 UFS phy
  dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
  phy: qmp: Provide unique clock names for DP clocks
  lkdtm: remove IDE_CORE_CP crashpoint
  lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
  coresight: Replace deprecated CPU-hotplug functions.
  Documentation: coresight: Add documentation for CoreSight config
  coresight: syscfg: Add initial configfs support
  coresight: config: Add preloaded configurations
  coresight: etm4x: Add complex configuration handlers to etmv4
  coresight: etm-perf: Update to activate selected configuration
  ...

Pull networking updates from Jakub Kicinski:
 "Core:

   - Enable memcg accounting for various networking objects.

  BPF:

   - Introduce bpf timers.

   - Add perf link and opaque bpf_cookie which the program can read out
     again, to be used in libbpf-based USDT library.

   - Add bpf_task_pt_regs() helper to access user space pt_regs in
     kprobes, to help user space stack unwinding.

   - Add support for UNIX sockets for BPF sockmap.

   - Extend BPF iterator support for UNIX domain sockets.

   - Allow BPF TCP congestion control progs and bpf iterators to call
     bpf_setsockopt(), e.g. to switch to another congestion control
     algorithm.

  Protocols:

   - Support IOAM Pre-allocated Trace with IPv6.

   - Support Management Component Transport Protocol.

   - bridge: multicast: add vlan support.

   - netfilter: add hooks for the SRv6 lightweight tunnel driver.

   - tcp:
       - enable mid-stream window clamping (by user space or BPF)
       - allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
       - more accurate DSACK processing for RACK-TLP

   - mptcp:
       - add full mesh path manager option
       - add partial support for MP_FAIL
       - improve use of backup subflows
       - optimize option processing

   - af_unix: add OOB notification support.

   - ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
     router.

   - mac80211: Target Wake Time support in AP mode.

   - can: j1939: extend UAPI to notify about RX status.

  Driver APIs:

   - Add page frag support in page pool API.

   - Many improvements to the DSA (distributed switch) APIs.

   - ethtool: extend IRQ coalesce uAPI with timer reset modes.

   - devlink: control which auxiliary devices are created.

   - Support CAN PHYs via the generic PHY subsystem.

   - Proper cross-chip support for tag_8021q.

   - Allow TX forwarding for the software bridge data path to be
     offloaded to capable devices.

  Drivers:

   - veth: more flexible channels number configuration.

   - openvswitch: introduce per-cpu upcall dispatch.

   - Add internet mix (IMIX) mode to pktgen.

   - Transparently handle XDP operations in the bonding driver.

   - Add LiteETH network driver.

   - Renesas (ravb):
       - support Gigabit Ethernet IP

   - NXP Ethernet switch (sja1105):
       - fast aging support
       - support for "H" switch topologies
       - traffic termination for ports under VLAN-aware bridge

   - Intel 1G Ethernet
       - support getcrosststamp() with PCIe PTM (Precision Time
         Measurement) for better time sync
       - support Credit-Based Shaper (CBS) offload, enabling HW traffic
         prioritization and bandwidth reservation

   - Broadcom Ethernet (bnxt)
       - support pulse-per-second output
       - support larger Rx rings

   - Mellanox Ethernet (mlx5)
       - support ethtool RSS contexts and MQPRIO channel mode
       - support LAG offload with bridging
       - support devlink rate limit API
       - support packet sampling on tunnels

   - Huawei Ethernet (hns3):
       - basic devlink support
       - add extended IRQ coalescing support
       - report extended link state

   - Netronome Ethernet (nfp):
       - add conntrack offload support

   - Broadcom WiFi (brcmfmac):
       - add WPA3 Personal with FT to supported cipher suites
       - support 43752 SDIO device

   - Intel WiFi (iwlwifi):
       - support scanning hidden 6GHz networks
       - support for a new hardware family (Bz)

   - Xen pv driver:
       - harden netfront against malicious backends

   - Qualcomm mobile
       - ipa: refactor power management and enable automatic suspend
       - mhi: move MBIM to WWAN subsystem interfaces

  Refactor:

   - Ambient BPF run context and cgroup storage cleanup.

   - Compat rework for ndo_ioctl.

  Old code removal:

   - prism54 remove the obsoleted driver, deprecated by the p54 driver.

   - wan: remove sbni/granch driver"

* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
  net: Add depends on OF_NET for LiteX's LiteETH
  ipv6: seg6: remove duplicated include
  net: hns3: remove unnecessary spaces
  net: hns3: add some required spaces
  net: hns3: clean up a type mismatch warning
  net: hns3: refine function hns3_set_default_feature()
  ipv6: remove duplicated 'net/lwtunnel.h' include
  net: w5100: check return value after calling platform_get_resource()
  net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
  net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
  net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
  fou: remove sparse errors
  ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
  octeontx2-af: Set proper errorcode for IPv4 checksum errors
  octeontx2-af: Fix static code analyzer reported issues
  octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
  octeontx2-af: Fix loop in free and unmap counter
  af_unix: fix potential NULL deref in unix_dgram_connect()
  dpaa2-eth: Replace strlcpy with strscpy
  octeontx2-af: Use NDC TX for transmit packet data
  ...

Pull workqueue updates from Tejun Heo:
 "There is a long-standing subtle destroy_workqueue() bug where a
  workqueue can be destroyed while internal work items used for flushing
  are still in flight. Lai fixed it by assigning a flush color to the
  internal work items so that they are correctly waited for during
  destruction.

  Other than that, all are minor cleanups"

* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Remove unused WORK_NO_COLOR
  workqueue: Assign a color to barrier work items
  workqueue: Mark barrier work with WORK_STRUCT_INACTIVE
  workqueue: Change the code of calculating work_flags in insert_wq_barrier()
  workqueue: Change arguement of pwq_dec_nr_in_flight()
  workqueue: Rename "delayed" (delayed by active management) to "inactive"
  workqueue: Replace deprecated CPU-hotplug functions.
  workqueue: Replace deprecated ida_simple_*() with ida_alloc()/ida_free()
  workqueue: Fix typo in comments
  workqueue: Fix possible memory leaks in wq_numa_init()

Pull cgroup updates from Tejun Heo:
 "Two cpuset behavior changes:

   - cpuset on cgroup2 is changed to enable memory migration based on
     nodemask by default.

   - A notification is generated when cpuset partition state changes.

  All other patches are minor fixes and cleanups"

* 'for-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Avoid compiler warnings with no subsystems
  cgroup/cpuset: Avoid memory migration when nodemasks match
  cgroup/cpuset: Enable memory migration for cpuset v2
  cgroup/cpuset: Enable event notification when partition state changes
  cgroup: cgroup-v1: clean up kernel-doc notation
  cgroup: Replace deprecated CPU-hotplug functions.
  cgroup/cpuset: Fix violation of cpuset locking rule
  cgroup/cpuset: Fix a partition bug with hotplug
  cgroup/cpuset: Miscellaneous code cleanup
  cgroup: remove cgroup_mount from comments

Pull ibft updates from Konrad Rzeszutek Wilk:
 "A fix for iBFT parsing code badly interfacing when KASLR is enabled"

* 'stable/for-linus-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
  iscsi_ibft: fix warning in reserve_ibft_region()
  iscsi_ibft: fix crash due to KASLR physical memory remapping

Merge tag 'for-5.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Add DM infrastructure for IMA-based remote attestion. These changes
   are the basis for deploying DM-based storage in a "cloud" that must
   validate configurations end-users run to maintain trust. These DM
   changes allow supported DM targets' configurations to be measured via
   IMA. But the policy and enforcement (of which configurations are
   valid) is managed by something outside the kernel (e.g. Keylime).

 - Fix DM crypt scalability regression on systems with many cpus due to
   percpu_counter spinlock contention in crypt_page_alloc().

 - Use in_hardirq() instead of deprecated in_irq() in DM crypt.

 - Add event counters to DM writecache to allow users to further assess
   how the writecache is performing.

 - Various code cleanup in DM writecache's main IO mapping function.

* tag 'for-5.15/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm crypt: use in_hardirq() instead of deprecated in_irq()
  dm ima: update dm documentation for ima measurement support
  dm ima: update dm target attributes for ima measurements
  dm ima: add a warning in dm_init if duplicate ima events are not measured
  dm ima: prefix ima event name related to device mapper with dm_
  dm ima: add version info to dm related events in ima log
  dm ima: prefix dm table hashes in ima log with hash algorithm
  dm crypt: Avoid percpu_counter spinlock contention in crypt_page_alloc()
  dm: add documentation for IMA measurement support
  dm: update target status functions to support IMA measurement
  dm ima: measure data on device rename
  dm ima: measure data on table clear
  dm ima: measure data on device remove
  dm ima: measure data on device resume
  dm ima: measure data on table load
  dm writecache: add event counters
  dm writecache: report invalid return from writecache_map helpers
  dm writecache: further writecache_map() cleanup
  dm writecache: factor out writecache_map_remap_origin()
  dm writecache: split up writecache_map() to improve code readability

Pull LED updates from Pavel Machek:
 "Usual driver changes, some documentation that should hopefully get LED
  names standartized, and many fixes"

* tag 'leds-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: (32 commits)
  leds: pca955x: Switch to i2c probe_new
  leds: pca955x: Let the core process the fwnode
  leds: pca955x: Implement the default-state property
  leds: pca955x: Add brightness_get function
  leds: pca955x: Clean up code formatting
  leds: leds-core: Implement the retain-state-shutdown property
  dt-bindings: leds: Add retain-state-shutdown boolean
  Documentation: leds: standartizing LED names
  leds: trigger: remove reference to obsolete CONFIG_IDE_GD_ATA
  leds: lp50xx: Fix chip name in KConfig
  leds: pwm: add support for default-state device property
  leds: move default_state read from fwnode to core
  leds: flash: Remove redundant initialization of variable ret
  leds: lgm-sso: Propagate error codes from callee to caller
  leds: trigger: audio: Add an activate callback to ensure the initial brightness is set
  leds: rt8515: Put fwnode in any case during ->probe()
  leds: lt3593: Put fwnode in any case during ->probe()
  leds: lm3697: Make error handling more robust
  leds: lm3697: Update header block to reflect reality
  leds: lm3692x: Correct headers (of*.h -> mod_devicetable.h)
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers for:

   - Aquacomputer D5 Next

   - SB-RMI power module

  Added chip support to existing drivers:

   - Support for various Zen2 and Zen3 APUs and for Yellow Carp (SMU
     v13) added to k10temp driver

   - Support for Silicom n5010 PAC added to intel-m10-bmc driver

   - Support for BPD-RS600 added to pmbus/bpa-rs600 driver

  Other notable changes:

   - In k10temp, do not display Tdie on Zen CPUs if there is no
     difference between Tdie and Tctl

   - Converted adt7470 and dell-smm drivers to use
     devm_hwmon_device_register_with_info API

   - Support for temperature/pwm tables added to axi-fan-control driver

   - Enabled fan control for Dell Precision 7510 in dell-smm driver

  Various other minor improvements and fixes in several drivers"

* tag 'hwmon-for-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (41 commits)
  hwmon: add driver for Aquacomputer D5 Next
  hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API
  hwmon: (adt7470) Convert to use regmap
  hwmon: (adt7470) Fix some style issues
  hwmon: (k10temp) Add support for yellow carp
  hwmon: (k10temp) Rework the temperature offset calculation
  hwmon: (k10temp) Don't show Tdie for all Zen/Zen2/Zen3 CPU/APU
  hwmon: (k10temp) Add additional missing Zen2 and Zen3 APUs
  hwmon: remove amd_energy driver in Makefile
  hwmon: (dell-smm) Rework SMM function debugging
  hwmon: (dell-smm) Mark i8k_get_fan_nominal_speed as __init
  hwmon: (dell-smm) Mark tables as __initconst
  hwmon: (pmbus/bpa-rs600) Add workaround for incorrect Pin max
  hwmon: (pmbus/bpa-rs600) Don't use rated limits as warn limits
  hwmon: (axi-fan-control) Support temperature vs pwm points
  hwmon: (axi-fan-control) Handle irqs in natural order
  hwmon: (axi-fan-control) Make sure the clock is enabled
  hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
  hwmon: (w83781d) Match on device tree compatibles
  dt-bindings: hwmon: Add bindings for Winbond W83781D
  ...

Pull i2c updates from Wolfram Sang:
 "I2C has a smaller pull reuest this time:

   - new driver for I2C virtio

   - removal of PMC SMP driver because platform is already gone

   - IRQ probing and DMAENGINE API cleanups

   - add SI metric prefix definitions to units.h

   - beginning of i801 refactorization

   - a few driver improvements"

* 'i2c/for-mergewindow' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (28 commits)
  i2c: cadence: Implement save restore
  i2c: xlp9xx: fix main IRQ check
  i2c: mt65xx: fix IRQ check
  i2c: virtio: add a virtio i2c frontend driver
  i2c: hix5hd2: fix IRQ check
  i2c: s3c2410: fix IRQ check
  i2c: iop3xx: fix deferred probing
  i2c: synquacer: fix deferred probing
  i2c: sun6i-pw2i: Prefer strscpy over strlcpy
  i2c: remove dead PMC MSP TWI/SMBus/I2C driver
  i2c: dev: Use sysfs_emit() in "show" functions
  i2c: dev: Define pr_fmt() and drop duplication substrings
  i2c: designware: Fix indentation in the header
  i2c: designware: Use DIV_ROUND_CLOSEST() macro
  units: Add SI metric prefix definitions
  i2c: at91: mark PM ops as __maybe unused
  i2c: sh_mobile: : use proper DMAENGINE API for termination
  i2c: qup: : use proper DMAENGINE API for termination
  i2c: mxs: : use proper DMAENGINE API for termination
  i2c: imx: : use proper DMAENGINE API for termination
  ...

Pull MMC and MEMSTICK updates from Ulf Hansson:
 "MMC core:
   - Return a proper response in case of an ioctl error
   - Issue HPI to interrupt BKOPS for eMMC if it timed out
   - Avoid hogging the CPU while polling for busy
   - Extend sd8787 pwrseq to support the wilc1000 SDIO
   - Remove a couple of confusing warning messages
   - Clarify comment for ->card_busy() host ops

  MMC host:
   - dw_mmc: Add data CRC error injection
   - mmci: De-assert reset during ->probe()
   - rtsx_pci: Fix long reads when clock is pre-scaled
   - sdhci: Correct the tuning command handle for PIO mode
   - sdhci-esdhc-imx: Improve support for auto tuning
   - sdhci-msm: Add support for the sc7280
   - sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP
   - sdhci-of-arasan: Enable support for auto cmd12
   - sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter
   - usdhi6rol0: Implement the ->card_busy() host ops

  MEMSTICK:
   - A couple of minor cleanups"

* tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits)
  mmc: queue: Remove unused parameters(request_queue)
  mmc: pwrseq: sd8787: fix compilation warning
  mmc: core: Return correct emmc response in case of ioctl error
  mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning
  mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning
  mmc: core: Issue HPI in case the BKOPS timed out
  mmc: queue: Match the data type of max_segments
  mmc: switch from 'pci_' to 'dma_' API
  memstick: switch from 'pci_' to 'dma_' API
  memstick: r592: Change the name of the 'pci_driver' structure to be consistent
  mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787
  mmc: pwrseq: sd8787: add support for wilc1000
  dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000
  dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule
  dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string
  dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings
  dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning
  mmc: core: Update ->card_busy() callback comment
  mmc: usdhi6rol0: Implement card_busy function
  mmc: sdhci: Correct the tuning command handle for PIO mode
  ...

Pull device properties framework updates from Rafael Wysocki:
 "These improve the handling of secondary firmware nodes in
  fwnode_graph_get_next_endpoint() (Daniel Scally)"

* tag 'devprop-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "media: device property: Call fwnode_graph_get_endpoint_by_id() for fwnode->secondary"
  device property: Check fwnode->secondary in fwnode_graph_get_next_endpoint()

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA kernel code to upstream revision 20210730,
  clean up the ACPI companion binding code, optimize the I2C handling in
  the XPower PMIC driver, add 16550-compatible Serial Port Subtype
  support to the SPCR parsing code, add a few LoongArch support bits,
  add a ne quirk to the button driver, add new PCH FIVR methods to the
  DPTF code, replace deprecated CPU-hotplug functions in the processor
  driver, improve the acpi_os_map_memory() handling on non-x86 and do
  some assorted cleanups.

  Specifics:

   - Update ACPICA code in the kernel to upstream revision 20210730
     including the following changes:
       - Add support for the AEST table (data compiler) to iASL (Bob
         Moore)
       - Fix an if statement (add parens) (Bob Moore)
       - Drop trailing semicolon from some macros (Bob Moore)
       - Fix compilation of WPBT table with no command-line arguments in
         iASL (Bob Moore)
       - Add method name "_DIS" for use with aslmethod.c (Bob Moore)
       - Add new DBG2 Serial Port Subtypes (Marcin Wojtas)

   - Add new PCH FIVR methods to the DPTF code (Srinivas Pandruvada)

   - Add support for the new 16550-compatible Serial Port Subtype to the
     SPCR table parsing code (Marcin Wojtas)

   - Add DMI quirk for Lenovo Yoga 9 (14INTL5) to the ACPI button driver
     (Ulrich Huber)

   - Add LoongArch support for ACPI_PROCESSOR/ACPI_NUMA (Huacai Chen)

   - Add memory semantics to acpi_os_map_memory() (Lorenzo Pieralisi)

   - Replace deprecated CPU-hotplug functions in the ACPI processor
     driver (Sebastian Andrzej Siewior)

   - Optimize I2C-bus handling in the XPower PMIC driver (Hans de Goede)

   - Make platform-profile catch profile changes initiated by user space
     and notify user processes of them (Hans de Goede)

   - Clean up the ACPI companion binding and unbinding code and update
     debug messaging in the ACPI power resources code (Rafael Wysocki)

   - Clean up a couple of code pieces related to configfs (Andy
     Shevchenko)

   - Rearrange the FPDT table parsing code to avoid printing warning
     messages for reserved record types (Adrian Huang)"

* tag 'acpi-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits)
  ACPI: power: Drop name from struct acpi_power_resource
  ACPI: power: Use acpi_handle_debug() to print debug messages
  ACPI: tables: FPDT: Do not print FW_BUG message if record types are reserved
  ACPI: button: Add DMI quirk for Lenovo Yoga 9 (14INTL5)
  ACPI: Add memory semantics to acpi_os_map_memory()
  ACPI: SPCR: Add support for the new 16550-compatible Serial Port Subtype
  ACPI: platform-profile: call sysfs_notify() from platform_profile_store()
  ACPICA: Update version to 20210730
  ACPICA: Add method name "_DIS" For use with aslmethod.c
  ACPICA: iASL: Fix for WPBT table with no command-line arguments
  ACPICA: Headers: Add new DBG2 Serial Port Subtypes
  ACPICA: Macros should not use a trailing semicolon
  ACPICA: Fix an if statement (add parens)
  ACPICA: iASL: Add support for the AEST table (data compiler)
  ACPI: processor: Replace deprecated CPU-hotplug functions
  ACPI: DPTF: Add new PCH FIVR methods
  ACPI: configfs: Make get_header() to return error pointer
  ACPI: configfs: Use sysfs_emit() in "show" functions
  driver core: Split device_platform_notify()
  software nodes: Split software_node_notify()
  ...

Pull power management updates from Rafael Wysocki:
 "These address some PCI device power management issues, add new
  hardware support to the RAPL power capping driver, add HWP guaranteed
  performance change notification support to the intel_pstate driver,
  replace deprecated CPU-hotplug functions in a few places, update CPU
  PM notifiers to use raw spinlocks, update the PM domains framework
  (new DT property support, Kconfig fix), do a couple of cleanups in
  code related to system sleep, and improve the energy model and the
  schedutil cpufreq governor.

  Specifics:

   - Address 3 PCI device power management issues (Rafael Wysocki).

   - Add Power Limit4 support for Alder Lake to the Intel RAPL power
     capping driver (Sumeet Pawnikar).

   - Add HWP guaranteed performance change notification support to the
     intel_pstate driver (Srinivas Pandruvada).

   - Replace deprecated CPU-hotplug functions in code related to power
     management (Sebastian Andrzej Siewior).

   - Update CPU PM notifiers to use raw spinlocks (Valentin Schneider).

   - Add support for 'required-opps' DT property to the generic power
     domains (genpd) framework and use this property for I2C on ARM64
     sc7180 (Rajendra Nayak).

   - Fix Kconfig issue related to genpd (Geert Uytterhoeven).

   - Increase energy calculation precision in the Energy Model (Lukasz
     Luba).

   - Fix kobject deletion in the exit code of the schedutil cpufreq
     governor (Kevin Hao).

   - Unmark some functions as kernel-doc in the PM core to avoid
     false-positive documentation build warnings (Randy Dunlap).

   - Check RTC features instead of ops in suspend_test Alexandre
     Belloni)"

* tag 'pm-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: domains: Fix domain attach for CONFIG_PM_OPP=n
  powercap: Add Power Limit4 support for Alder Lake SoC
  cpufreq: intel_pstate: Process HWP Guaranteed change notification
  thermal: intel: Allow processing of HWP interrupt
  notifier: Remove atomic_notifier_call_chain_robust()
  PM: cpu: Make notifier chain use a raw_spinlock_t
  PM: sleep: unmark 'state' functions as kernel-doc
  arm64: dts: sc7180: Add required-opps for i2c
  PM: domains: Add support for 'required-opps' to set default perf state
  opp: Don't print an error if required-opps is missing
  cpufreq: schedutil: Use kobject release() method to free sugov_tunables
  PM: EM: Increase energy calculation precision
  PM: sleep: check RTC features instead of ops in suspend_test
  PM: sleep: s2idle: Replace deprecated CPU-hotplug functions
  cpufreq: Replace deprecated CPU-hotplug functions
  powercap: intel_rapl: Replace deprecated CPU-hotplug functions
  PCI: PM: Enable PME if it can be signaled from D3cold
  PCI: PM: Avoid forcing PCI_D0 for wakeup reasons inconsistently
  PCI: Use pci_update_current_state() in pci_enable_device_flags()

Pull smack updates from Casey Schaufler:
 "There is a variable used only during start-up that's now marked
  __initdata and a change where the code was working by sheer luck that
  is now done properly.

  Both have been in next for several weeks and pass the Smack testsuite"

* tag 'Smack-for-5.15' of git://github.com/cschaufler/smack-next:
  smack: mark 'smack_enabled' global variable as __initdata
  Smack: Fix wrong semantics in smk_access_entry()

Pull audit updates from Paul Moore:
 "Two patches in the audit pull request for v5.15; one is trivial
  ("header protection") but the second is a real patch that fixes a
  refcounting problem.

  The refcount fix normally would have been sent up during the -rcX
  cycle, but since we merged it less than a week before v5.14 proper I
  felt it was better to wait for the merge window to open; the patch is
  marked with the usual -stable markings"

* tag 'audit-pr-20210830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: move put_tree() to avoid trim_trees refcount underflow and UAF
  audit: add header protection to kernel/audit.h

Pull selinux update from Paul Moore:
 "We've got an unusually small SELinux pull request for v5.15 that
  consists of only one (?!) patch that is really pretty minor when you
  look at it.

  Unsurprisingly it passes all of our tests and merges cleanly on top of
  your tree right now, please merge this for v5.15"

* tag 'selinux-pr-20210830' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: return early for possible NULL audit buffers

Pull set_user()  update from Christian Brauner:
 "This contains a single fix to set_user() which aligns permission
  checks with the corresponding fork() codepath. No one involved in this
  could come up with a reason for the difference.

  A capable caller can already circumvent the check when they fork where
  the permission checks are already for the relevant capabilities in
  addition to also allowing to exceed nproc when it is the init user.

  So apply the same logic to set_user()"

* tag 'kernel.sys.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  set_user: add capability check when rlimit(RLIMIT_NPROC) exceeds

Pull idmapping documentation updates from Christian Brauner:
 "The bulk of the idmapped work this cycle was adding support for
  idmapped mounts to btrfs.

  While this required the addition of a (simple) new vfs helper all the
  work is going through David Sterba's btrfs tree. It was way simpler to
  do it this way rather then forcing David to coordinate between his
  btrfs and my tree. Plus I don't care who merges it as long as I feel I
  can trust the maintainer and the btrfs folks were really fast and
  helpful in reviewing this work.

  As always, associated with the btrfs port for idmapped mounts is a new
  fstests extension specifically concerned with btrfs ioctls (e.g.
  subvolume creation, deletion etc.) on idmapped mounts which can be
  found in the fstests repo as 5f8179ce8b00 ("btrfs: introduce btrfs
  specific idmapped mounts tests").

  Consequently, this cycle the idmapping pull is boring. It only
  contains documentation updates, specifically about how idmappings and
  idmapped mounts work"

* tag 'fs.idmapped.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  doc: give a more thorough id handling explanation

Pull close_range() cleanup from Christian Brauner:
 "This is a cleanup for close_range() which was sent as part of a bugfix
  we did some time ago in commit 9b5b8722 ("file: fix close_range()
  for unshare+cloexec").

  We used to share more code between some helpers for close_range()
  which made retrieving the maximum number of open fds before calling
  into the helpers sensible. But with the introduction of
  CLOSE_RANGE_CLOEXEC and the need to retrieve the number of maximum fds
  once more for CLOSE_RANGE_CLOEXEC that stopped making sense. So the
  code was in a dumb in-limbo state.

  Fix this by simplifying the code a bit.

  The original idea was to only fix the bug itself and make backporting
  easy. And since the cleanup wasn't very pressing I left it in
  linux-next for a very long time. I didn't pull the patches from the
  list again back then which is why they don't have lore-links. So I'm
  listing them below explicitly"

Commit 03ba0fe4 ("file: simplify logic in __close_range()")
Link: https://lore.kernel.org/linux-fsdevel/20210402123548.108372-3-brauner@kernel.org

Commit f49fd6d3 ("file: let pick_file() tell caller it's done")
Link: https://lore.kernel.org/linux-fsdevel/20210402123548.108372-4-brauner@kernel.org

* tag 'fs.close_range.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  file: simplify logic in __close_range()
  file: let pick_file() tell caller it's done

Merge tag 'fs.move_mount.move_mount_set_group.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull move_mount updates from Christian Brauner:
 "This contains an extension to the move_mount() syscall making it
  possible to add a single private mount into an existing propagation
  tree.

  The use-case comes from the criu folks which have been struggling with
  restoring complex mount trees for a long time. Variations of this work
  have been discussed at Plumbers before, e.g.

      https://www.linuxplumbersconf.org/event/7/contributions/640/

  The extension to move_mount() enables criu to restore any set of mount
  namespaces, mount trees and sharing group trees without introducing
  yet more complexity into mount propagation itself.

  The changes required to criu to make use of this and restore complex
  propagation trees are available at

      https://github.com/Snorch/criu/commits/mount-v2-poc

  A cleaned-up version of this will go up for merging into the main criu
  repo after this lands"

* tag 'fs.move_mount.move_mount_set_group.v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: add move_mount(MOVE_MOUNT_SET_GROUP) selftest
  move_mount: allow to add a mount into an existing group

Pull iomap updates from Darrick Wong:
 "The most notable externally visible change for this cycle is the
  addition of support for reads to inline tail fragments of files, which
  was requested by the erofs developers; and a correction for a kernel
  memory corruption bug if the sysadmin tries to activate a swapfile
  with more pages than the swapfile header suggests.

  We also now report writeback completion errors to the file mapping
  correctly, instead of munging all errors into EIO.

  Internally, the bulk of the changes are Christoph's patchset to reduce
  the indirect function call count by a third to a half by converting
  iomap iteration from a loop pattern to a generator/consumer pattern.
  As an added bonus, fsdax no longer open-codes iomap apply loops.

  Summary:

   - Simplify the bio_end_page usage in the buffered IO code.

   - Support reading inline data at nonzero offsets for erofs.

   - Fix some typos and bad grammar.

   - Convert kmap_atomic usage in the inline data read path.

   - Add some extra inline data input checking.

   - Fix a memory corruption bug stemming from iomap_swapfile_activate
     trying to activate more pages than mm was expecting.

   - Pass errnos through the page writeback code so that writeback
     errors are reported correctly instead of being munged to EIO.

   - Replace iomap_apply with a open-coded iterator loops to reduce the
     number of indirect calls by a third to a half.

   - Refactor the fsdax code to use iomap iterators instead of the
     open-coded iomap_apply code that it had before.

   - Format file range iomap tracepoint data in hexadecimal and
     standardize the names used in the pretty-print string"

* tag 'iomap-5.15-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (41 commits)
  iomap: standardize tracepoint formatting and storage
  mm/swap: consider max pages in iomap_swapfile_add_extent
  iomap: move loop control code to iter.c
  iomap: constify iomap_iter_srcmap
  fsdax: switch the fault handlers to use iomap_iter
  fsdax: factor out a dax_fault_actor() helper
  fsdax: factor out helpers to simplify the dax fault code
  iomap: rework unshare flag
  iomap: pass an iomap_iter to various buffered I/O helpers
  iomap: remove iomap_apply
  fsdax: switch dax_iomap_rw to use iomap_iter
  iomap: switch iomap_swapfile_activate to use iomap_iter
  iomap: switch iomap_seek_data to use iomap_iter
  iomap: switch iomap_seek_hole to use iomap_iter
  iomap: switch iomap_bmap to use iomap_iter
  iomap: switch iomap_fiemap to use iomap_iter
  iomap: switch __iomap_dio_rw to use iomap_iter
  iomap: switch iomap_page_mkwrite to use iomap_iter
  iomap: switch iomap_zero_range to use iomap_iter
  iomap: switch iomap_file_unshare to use iomap_iter
  ...

Pull project quota update from Darrick Wong:
 "A single VFS patch that prevents userspace from setting project quota
  ids on files that the VFS considers invalid"

* tag 'vfs-5.15-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs: forbid invalid project ID

Pull nfsd updates from Chuck Lever:
 "New features:

   - Support for server-side disconnect injection via debugfs

   - Protocol definitions for new RPC_AUTH_TLS authentication flavor

  Performance improvements:

   - Reduce page allocator traffic in the NFSD splice read actor

   - Reduce CPU utilization in svcrdma's Send completion handler

  Notable bug fixes:

   - Stabilize lockd operation when re-exporting NFS mounts

   - Fix the use of %.*s in NFSD tracepoints

   - Fix /proc/sys/fs/nfs/nsm_use_hostnames"

* tag 'nfsd-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
  nfsd: fix crash on LOCKT on reexported NFSv3
  nfs: don't allow reexport reclaims
  lockd: don't attempt blocking locks on nfs reexports
  nfs: don't atempt blocking locks on nfs reexports
  Keep read and write fds with each nlm_file
  lockd: update nlm_lookup_file reexport comment
  nlm: minor refactoring
  nlm: minor nlm_lookup_file argument change
  lockd: lockd server-side shouldn't set fl_ops
  SUNRPC: Add documentation for the fail_sunrpc/ directory
  SUNRPC: Server-side disconnect injection
  SUNRPC: Move client-side disconnect injection
  SUNRPC: Add a /sys/kernel/debug/fail_sunrpc/ directory
  svcrdma: xpt_bc_xprt is already clear in __svc_rdma_free()
  nfsd4: Fix forced-expiry locking
  rpc: fix gss_svc_init cleanup on failure
  SUNRPC: Add RPC_AUTH_TLS protocol numbers
  lockd: change the proc_handler for nsm_use_hostnames
  sysctl: introduce new proc handler proc_dobool
  SUNRPC: Fix a NULL pointer deref in trace_svc_stats_latency()
  ...

Pull gfs2 updates from Andreas Gruenbacher:

 - Various withdraw related fixes (freeze glock recursion, thread
   initialization / destruction order, journal recovery, glock cleanup,
   withdraw under journal lock).

 - Some error message improvements.

 - Various minor cleanups.

* tag 'gfs2-v5.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Remove redundant check from gfs2_glock_dq
  gfs2: Delay withdraw from atomic context
  gfs2: Don't call dlm after protocol is unmounted
  gfs2: don't stop reads while withdraw in progress
  gfs2: Mark journal inodes as "don't cache"
  gfs2: nit: gfs2_drop_inode shouldn't return bool
  gfs2: Eliminate vestigial HIF_FIRST
  gfs2: Make recovery error more readable
  gfs2: Don't release and reacquire local statfs bh
  gfs2: init system threads before freeze lock
  gfs2: tiny cleanup in gfs2_log_reserve
  gfs2: trivial clean up of gfs2_ail_error
  gfs2: be more verbose replaying invalid rgrp blocks
  gfs2: Fix glock recursion in freeze_go_xmote_bh
  gfs2: Fix memory leak of object lsi on error return path

Pull fscrypt updates from Eric Biggers:
 "Some small fixes and cleanups for fs/crypto/:

   - Fix ->getattr() for ext4, f2fs, and ubifs to report the correct
     st_size for encrypted symlinks

   - Use base64url instead of a custom Base64 variant

   - Document struct fscrypt_operations"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: document struct fscrypt_operations
  fscrypt: align Base64 encoding with RFC 4648 base64url
  fscrypt: remove mention of symlink st_size quirk from documentation
  ubifs: report correct st_size for encrypted symlinks
  f2fs: report correct st_size for encrypted symlinks
  ext4: report correct st_size for encrypted symlinks
  fscrypt: add fscrypt_symlink_getattr() for computing st_size

Pull btrfs updates from David Sterba:
 "The highlights of this round are integrations with fs-verity and
  idmapped mounts, the rest is usual mix of minor improvements, speedups
  and cleanups.

  There are some patches outside of btrfs, namely updating some VFS
  interfaces, all straightforward and acked.

  Features:

   - fs-verity support, using standard ioctls, backward compatible with
     read-only limitation on inodes with previously enabled fs-verity

   - idmapped mount support

   - make mount with rescue=ibadroots more tolerant to partially damaged
     trees

   - allow raid0 on a single device and raid10 on two devices,
     degenerate cases but might be useful as an intermediate step during
     conversion to other profiles

   - zoned mode block group auto reclaim can be disabled via sysfs knob

  Performance improvements:

   - continue readahead of node siblings even if target node is in
     memory, could speed up full send (on sample test +11%)

   - batching of delayed items can speed up creating many files

   - fsync/tree-log speedups
       - avoid unnecessary work (gains +2% throughput, -2% run time on
         sample load)
       - reduced lock contention on renames (on dbench +4% throughput,
         up to -30% latency)

  Fixes:

   - various zoned mode fixes

   - preemptive flushing threshold tuning, avoid excessive work on
     almost full filesystems

  Core:

   - continued subpage support, preparation for implementing remaining
     features like compression and defragmentation; with some
     limitations, write is now enabled on 64K page systems with 4K
     sectors, still considered experimental
       - no readahead on compressed reads
       - inline extents disabled
       - disabled raid56 profile conversion and mount

   - improved flushing logic, fixing early ENOSPC on some workloads

   - inode flags have been internally split to read-only and read-write
     incompat bit parts, used by fs-verity

   - new tree items for fs-verity
       - descriptor item
       - Merkle tree item

   - inode operations extended to be namespace-aware

   - cleanups and refactoring

  Generic code changes:

   - fs: new export filemap_fdatawrite_wbc

   - fs: removed sync_inode

   - block: bio_trim argument type fixups

   - vfs: add namespace-aware lookup"

* tag 'for-5.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (114 commits)
  btrfs: reset replace target device to allocation state on close
  btrfs: zoned: fix ordered extent boundary calculation
  btrfs: do not do preemptive flushing if the majority is global rsv
  btrfs: reduce the preemptive flushing threshold to 90%
  btrfs: tree-log: check btrfs_lookup_data_extent return value
  btrfs: avoid unnecessarily logging directories that had no changes
  btrfs: allow idmapped mount
  btrfs: handle ACLs on idmapped mounts
  btrfs: allow idmapped INO_LOOKUP_USER ioctl
  btrfs: allow idmapped SUBVOL_SETFLAGS ioctl
  btrfs: allow idmapped SET_RECEIVED_SUBVOL ioctls
  btrfs: relax restrictions for SNAP_DESTROY_V2 with subvolids
  btrfs: allow idmapped SNAP_DESTROY ioctls
  btrfs: allow idmapped SNAP_CREATE/SUBVOL_CREATE ioctls
  btrfs: check whether fsgid/fsuid are mapped during subvolume creation
  btrfs: allow idmapped permission inode op
  btrfs: allow idmapped setattr inode op
  btrfs: allow idmapped tmpfile inode op
  btrfs: allow idmapped symlink inode op
  btrfs: allow idmapped mkdir inode op
  ...

Pull cifs client updates from Steve French:
 "Eleven cifs/smb3 client fixes:

   - mostly restructuring to allow disabling less secure algorithms
     (this will allow eventual removing rc4 and md4 from general use in
     the kernel)

   - four fixes, including two for stable

   - enable r/w support with fscache and cifs.ko

  I am working on a larger set of changes (the usual ... multichannel,
  auth and signing improvements), but wanted to get these in earlier to
  reduce chance of merge conflicts later in the merge window"

* tag '5.15-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Do not leak EDEADLK to dgetents64 for STATUS_USER_SESSION_DELETED
  cifs: add cifs_common directory to MAINTAINERS file
  cifs: cifs_md4 convert to SPDX identifier
  cifs: create a MD4 module and switch cifs.ko to use it
  cifs: fork arc4 and create a separate module for it for cifs and other users
  cifs: remove support for NTLM and weaker authentication algorithms
  cifs: enable fscache usage even for files opened as rw
  oid_registry: Add OIDs for missing Spnego auth mechanisms to Macs
  smb3: fix posix extensions mount option
  cifs: fix wrong release in sess_alloc_buffer() failed path
  CIFS: Fix a potencially linear read overflow

Pull initial ksmbd implementation from Steve French:
 "Initial merge of kernel smb3 file server, ksmbd.

  The SMB family of protocols is the most widely deployed network
  filesystem protocol, the default on Windows and Macs (and even on many
  phones and tablets), with clients and servers on all major operating
  systems, but lacked a kernel server for Linux. For many cases the
  current userspace server choices were suboptimal either due to memory
  footprint, performance or difficulty integrating well with advanced
  Linux features.

  ksmbd is a new kernel module which implements the server-side of the
  SMB3 protocol. The target is to provide optimized performance, GPLv2
  SMB server, and better lease handling (distributed caching). The
  bigger goal is to add new features more rapidly (e.g. RDMA aka
  "smbdirect", and recent encryption and signing improvements to the
  protocol) which are easier to develop on a smaller, more tightly
  optimized kernel server than for example in Samba.

  The Samba project is much broader in scope (tools, security services,
  LDAP, Active Directory Domain Controller, and a cross platform file
  server for a wider variety of purposes) but the user space file server
  portion of Samba has proved hard to optimize for some Linux workloads,
  including for smaller devices.

  This is not meant to replace Samba, but rather be an extension to
  allow better optimizing for Linux, and will continue to integrate well
  with Samba user space tools and libraries where appropriate. Working
  with the Samba team we have already made sure that the configuration
  files and xattrs are in a compatible format between the kernel and
  user space server.

  Various types of functional and regression tests are regularly run
  against it. One example is the automated 'buildbot' regression tests
  which use the Linux client to test against ksmbd, e.g.

     http://smb3-test-rhel-75.southcentralus.cloudapp.azure.com/#/builders/8/builds/56

  but other test suites, including Samba's smbtorture functional test
  suite are also used regularly"

* tag '5.15-rc-first-ksmbd-merge' of git://git.samba.org/ksmbd: (219 commits)
  ksmbd: fix __write_overflow warning in ndr_read_string
  MAINTAINERS: ksmbd: add cifs_common directory to ksmbd entry
  MAINTAINERS: ksmbd: update my email address
  ksmbd: fix permission check issue on chown and chmod
  ksmbd: don't set FILE DELETE and FILE_DELETE_CHILD in access mask by default
  MAINTAINERS: add git adddress of ksmbd
  ksmbd: update SMB3 multi-channel support in ksmbd.rst
  ksmbd: smbd: fix kernel oops during server shutdown
  ksmbd: remove select FS_POSIX_ACL in Kconfig
  ksmbd: use proper errno instead of -1 in smb2_get_ksmbd_tcon()
  ksmbd: update the comment for smb2_get_ksmbd_tcon()
  ksmbd: change int data type to boolean
  ksmbd: Fix multi-protocol negotiation
  ksmbd: fix an oops in error handling in smb2_open()
  ksmbd: add ipv6_addr_v4mapped check to know if connection from client is ipv4
  ksmbd: fix missing error code in smb2_lock
  ksmbd: use channel signingkey for binding SMB2 session setup
  ksmbd: don't set RSS capable in FSCTL_QUERY_NETWORK_INTERFACE_INFO
  ksmbd: Return STATUS_OBJECT_PATH_NOT_FOUND if smb2_creat() returns ENOENT
  ksmbd: fix -Wstringop-truncation warnings
  ...

include/linux/netdevice.h
net/socket.c

  d0efb162 ("net: don't unconditionally copy_from_user a struct ifreq for socket ioctls")

  876f0bf9 ("net: socket: simplify dev_ifconf handling")
  29c49648 ("net: socket: rework compat_ifreq_ioctl()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Current settings may produce a build error when
CONFIG_OF_NET is disabled. The CONFIG_OF_NET controls
a headfile <linux/of.h> and some functions
 in <linux/of_net.h>.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Remove all but the first include of net/lwtunnel.h from 'seg6_local.c.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes some unnecessary spaces for cleanup.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add some required spaces to improve readability.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

abs() returns signed long, which could not convert the type
as unsigned, and it may cause a mismatch type warning from
static tools. To fix it, this patch uses an variable to save
the abs()'s result and does a explicit conversion.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, the driver sets default feature for netdev->features,
netdev->hw_features, netdev->vlan_features and
netdev->hw_enc_features separately. It's fussy, because most
of the feature bits are same. So refine it by copy value from
netdev->features.
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove all but the first include of net/lwtunnel.h from seg6_iptunnel.c.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>