- 25 Nov, 2014 32 commits
-
-
Olli Salonen authored
The Silicon Labs Si2146 tuner seems to work with the same driver as the Si2157, but there a few exceptions. The powerup command seems to be quite a bit different. In addition there's a property 0207 that requires a different value. Thus another entry is created in the si2157_id table to support also si2146 in this driver. The datasheet is available on manufacturer's website: http://www.silabs.com/support%20documents/technicaldocs/Si2146-short.pdfSigned-off-by:
Olli Salonen <olli.salonen@iki.fi> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
By default dma_map_sg syncs the mapped buffer to the device. But buf_prepare expects a buffer syncs for the cpu and the buffer will be synced to the device in the prepare memop. The reverse is true for dma_unmap_sg, buf_finish and the finish memop. To prevent unnecessary syncs we ask dma_(un)map_sg to skip the sync. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Pawel Osciak <pawel@osciak.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Now that vb2 supports DMABUF export for dma-sg and vmalloc memory modes, we can enable the vb2_expbuf support in vivid. Signed-off-by:
-
Hans Verkuil authored
Add support for DMABUF exporting to the vb2-vmalloc implementation. All memory models now have support for both importing and exporting of DMABUFs. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Acked-by:
-
Hans Verkuil authored
Add DMABUF export support to vb2-dma-sg. Signed-off-by:
-
Hans Verkuil authored
Add support for importing dmabuf to videobuf2-dma-sg. Signed-off-by:
-
Hans Verkuil authored
This moves dma_(un)map_sg to the get_userptr/put_userptr and alloc/put memops of videobuf2-dma-sg.c and adds dma_sync_sg_for_device/cpu to the prepare/finish memops. Now that vb2-dma-sg will sync the buffers for you in the prepare/finish memops we can drop that from the drivers that use dma-sg. For the solo6x10 driver that was a bit more involved because it needs to copy JPEG or MPEG headers to the buffer before returning it to userspace, and that cannot be done in the old place since the buffer there is still setup for DMA access, not for CPU access. However, the buf_finish op is the ideal place to do this. By the time buf_finish is called the buffer is available for CPU access, so copying to the buffer is fine. [mchehab@osg.samsung.com: Fix a compilation breakage: drivers/media/v4l2-core/videobuf2-dma-sg.c:150:19: error: 'struct vb2_dma_sg_buf' has no member named 'dma_sgt'] Signed-off-by:
-
Hans Verkuil authored
Require that dma-sg also uses an allocation context. This is in preparation for adding prepare/finish memops to sync the memory between DMA and CPU. Signed-off-by:
-
Hans Verkuil authored
Don't try to free a pointer containing an ERR_PTR(). Signed-off-by:
-
Hans Verkuil authored
This is needed for the next patch where the dma-sg alloc memop needs to know the dma_dir. Signed-off-by:
-
Hans Verkuil authored
The 'write' argument is very ambiguous. I first assumed that if it is 1, then we're doing video output but instead it meant the reverse. Since it is used to setup the dma_dir value anyway it is now replaced by the correct dma_dir value which is unambiguous. Signed-off-by:
-
Hans Verkuil authored
Document that drivers can access/modify the buffer contents in buf_prepare and buf_finish. That was not clearly stated before. Signed-off-by:
-
Laurent Pinchart authored
videobuf2 requires drivers to give back ownership of all queue buffers in the stop_streaming operation, as well as in the start_streaming operation in case of failure. Mark all queued buffers as done in the error or queued state. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
This brings the function name in line with the V4L2 API terminology and allows removing the duplicate queue type check. Signed-off-by:
-
Laurent Pinchart authored
This brings the function name in line with the V4L2 API terminology. Signed-off-by:
-
Laurent Pinchart authored
When releasing the file handle the driver calls the vb2_queue_release which turns the stream off. There's thus no need to turn the stream off explicitly beforehand. Signed-off-by:
-
Laurent Pinchart authored
To work propertly the videobuf2 core code needs to be in charge of stream start/stop control. Implement the start_streaming and stop_streaming vb2 operations and move video enable/disable code to them. Signed-off-by:
-
Laurent Pinchart authored
Factorize the container_of() call into an inline function and update callers. Signed-off-by:
-
Laurent Pinchart authored
In order to make use of the vb2 queue start/stop_streaming operations the video and queue enable/disable operations need to be split, as the vb2 queue will need to enable and disable video instead of the other way around. Also move buffer queue disable outside of uvc_video_resume() to remove all queue disable operations out of uvc_video.c. Signed-off-by:
-
Laurent Pinchart authored
The driver doesn't support interlaced video, set field to V4L2_FIELD_NONE for all vb2 buffers. Signed-off-by:
-
Laurent Pinchart authored
Simplify ioctl handling by using video_ioctl2. Signed-off-by:
-
Laurent Pinchart authored
The v4l2_device structure embed a v4l2_prio_state structure used by default for priority handling, but drivers can override that default by setting the video_dev prio pointer to a different v4l2_prio_state instance. However, the VIDIO_G_PRIORITY and VIDIOC_S_PRIORITY implementations use the prio state embedded in v4l2_device unconditionally, breaking drivers that need to override the default. Fix them. Signed-off-by:
-
Takashi Iwai authored
We've got a bug report at disconnecting a Webcam, where the kernel spews warnings like below: WARNING: CPU: 0 PID: 8385 at ../fs/sysfs/group.c:219 sysfs_remove_group+0x87/0x90() sysfs group c0b2350c not found for kobject 'event3' CPU: 0 PID: 8385 Comm: queue2:src Not tainted 3.16.2-1.gdcee397-default #1 Hardware name: ASUSTeK Computer INC. A7N8X-E/A7N8X-E, BIOS ASUS A7N8X-E Deluxe ACPI BIOS Rev 1013 11/12/2004 c08d0705 ddc75cbc c0718c5b ddc75ccc c024b654 c08c6d44 ddc75ce8 000020c1 c08d0705 000000db c03d1ec7 c03d1ec7 00000009 00000000 c0b2350c d62c9064 ddc75cd4 c024b6a3 00000009 ddc75ccc c08c6d44 ddc75ce8 ddc75cfc c03d1ec7 Call Trace: [<c0205ba6>] try_stack_unwind+0x156/0x170 [<c02046f3>] dump_trace+0x53/0x180 [<c0205c06>] show_trace_log_lvl+0x46/0x50 [<c0204871>] show_stack_log_lvl+0x51/0xe0 [<c0205c67>] show_stack+0x27/0x50 [<c0718c5b>] dump_stack+0x3e/0x4e [<c024b654>] warn_slowpath_common+0x84/0xa0 [<c024b6a3>] warn_slowpath_fmt+0x33/0x40 [<c03d1ec7>] sysfs_remove_group+0x87/0x90 [<c05a2c54>] device_del+0x34/0x180 [<c05e3989>] evdev_disconnect+0x19/0x50 [<c05e06fa>] __input_unregister_device+0x9a/0x140 [<c05e0845>] input_unregister_device+0x45/0x80 [<f854b1d6>] uvc_delete+0x26/0x110 [uvcvideo] [<f84d66f8>] v4l2_device_release+0x98/0xc0 [videodev] [<c05a25bb>] device_release+0x2b/0x90 [<c04ad8bf>] kobject_cleanup+0x6f/0x1a0 [<f84d5453>] v4l2_release+0x43/0x70 [videodev] [<c0372f31>] __fput+0xb1/0x1b0 [<c02650c1>] task_work_run+0x91/0xb0 [<c024d845>] do_exit+0x265/0x910 [<c024df64>] do_group_exit+0x34/0xa0 [<c025a76f>] get_signal_to_deliver+0x17f/0x590 [<c0201b6a>] do_signal+0x3a/0x960 [<c02024f7>] do_notify_resume+0x67/0x90 [<c071ebb5>] work_notifysig+0x30/0x3b [<b7739e60>] 0xb7739e5f ---[ end trace b1e56095a485b631 ]--- The cause is that uvc_status_cleanup() is called after usb_put_*() in uvc_delete(). usb_put_*() removes the sysfs parent and eventually removes the children recursively, so the later device_del() can't find its sysfs. The fix is simply rearrange the call orders in uvc_delete() so that the child is removed before the parent. Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=897736Reported-and-tested-by:Martin Pluskal <mpluskal@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Philipp Zabel authored
This patch adds a quirk to force Y8 pixel format even if the camera reports half-width YUYV. Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The v4l2_ctrl_check() helper function is now only used in cx2341x. Move it there and make it static. Signed-off-by:
-
Hans Verkuil authored
For some unknown reason several control prototypes where in v4l2-common.c instead of in v4l2-ctrls.h. Move them and document them. Signed-off-by:
-
Hans Verkuil authored
Several control helper functions are no longer needed since most drivers are now converted to the control framework. So we can delete them. Signed-off-by:
-
Hans Verkuil authored
These days vdev->v4l2_dev must always be set. This means that some old code that still tests for a NULL vdev->v4l2_dev can be removed or simplified. Signed-off-by:
-
Hans Verkuil authored
Never use sg++, always use sg = sg_next(sg). Scatterlist entries can be combined if the memory is contiguous but sg++ won't know about that. As far as I can tell cx88 and ivtv are really broken because of this, and bttv and cx25821 are OK because vb1 doesn't combine scatterlist entries. But regardless, sg++ should never be used, only sg_next is safe. Signed-off-by:
-
Prabhakar Lad authored
Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The omap2 media driver got removed. Remove a left-over for tcm825x driver that were also at omap2 tree. Signed-off-by:
-
- 21 Nov, 2014 8 commits
-
-
Christian Resell authored
Simple style fix (checkpatch.pl: "space prohibited before that ','"). For the eudyptula challenge (http://eudyptula-challenge.org/). Signed-off-by:
Christian F. Resell <christian.resell@gmail.com> Signed-off-by:
-
Olli Salonen authored
When new parameters are added for si2168 driver, the parameters have to be explicitly defined for each device if the si2168_config struct is not initialized to all zeros. Signed-off-by:
-
Olli Salonen authored
When new parameters are added for si2168 driver, the parameters have to be explicitly defined for each device if the si2168_config struct is not initialized to all zeros. Signed-off-by:
-
Olli Salonen authored
When new parameters are added for si2168 driver, the parameters have to be explicitly defined for each device if the si2168_config struct is not initialized to all zeros. Signed-off-by:
-
Andreas Ruprecht authored
In smipcie.c, the function i2c_bit_add_bus() is called. This function is defined by the I2C bit-banging interfaces enabled with CONFIG_I2C_ALGOBIT. As there was no dependency in Kconfig, CONFIG_I2C_ALGOBIT could be set to "m" while CONFIG_DVB_SMIPCIE was set to "y", resulting in a build error due to an undefined reference. This patch adds the dependency on CONFIG_I2C_ALGOBIT in Kconfig by selecting it when CONFIG_DVB_SMIPCIE is selected. Signed-off-by:
Andreas Ruprecht <rupran@einserver.de> Reported-by:
Jim Davis <jim.epost@gmail.com> Signed-off-by:
-
Antti Palosaari authored
Load SDR sub-driver in order to support SDR for devices having this tuner too. Signed-off-by:
-
Antti Palosaari authored
That logic was duplicated from rtl2832_sdr.h in order to avoid hard dependency for staging directory. rtl2832_sdr is moved to media, so we could remove that code now. Signed-off-by:
-
Antti Palosaari authored
Better to rename tuner I2C to something which clearly says it is for tuner as there is now multiple different I2C clients used. Signed-off-by:
-
