- 20 Jan, 2015 2 commits
-
-
Takashi Iwai authored
Instead of sysfs and the conditional build with Kconfig, implement the handling of the impulse response controls via control API, and always enable the build. Two new controls, "Impulse Response Volume" and "Impulse Response Period" are added as a replacement for the former sysfs files. Tested-by:
Chris Rorvick <chris@rorvick.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Split to each individual driver for POD, PODHD, TonePort and Variax with a core LINE6 helper module. The new modules follow the standard ALSA naming rule with snd prefix: snd-usb-pod, snd-usb-podhd, snd-usb-toneport and snd-usb-variax, together with the corresponding CONFIG_SND_USB_* Kconfig items. Tested-by:
-
- 19 Jan, 2015 1 commit
-
-
Takashi Iwai authored
No functional change, refactoring with the standard helpers. Signed-off-by:
-
- 12 Jan, 2015 28 commits
-
-
Takashi Iwai authored
Promote line6 driver from staging to sound/usb/line6 directory, and maintain through sound subsystem tree. This commit just moves the code and adapts Makefile / Kconfig. The further renames and misc cleanups will follow. Signed-off-by: -
Chris Rorvick authored
Remove declarations from the header and move the definitions up in the source so they need not be forward declared. Signed-off-by:
Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Chris Rorvick authored
Which *_disconnect() to call on disconnect is known at initialization. Add a function pointer to the `usb_line6' struct and use to call into the appropriate logic instead of evaluating the conditional logic. Signed-off-by:
-
Chris Rorvick authored
Which *_process_message() function (if any) to call when data is received is known at initialization. Add a function pointer to the `usb_line6' struct and use to call into the appropriate logic instead of evaluating the conditional logic for each message. Signed-off-by:
-
Chris Rorvick authored
Casting the `struct usb_line6' pointer at the call point makes the code difficult to read. This is substantially cleaned up by moving the cast into the callees. Signed-off-by:
-
Chris Rorvick authored
Casting the `struct usb_line6' pointer at the call point makes the code difficult to read. This is substantially cleaned up by moving the cast into the callees. Signed-off-by:
-
Chris Rorvick authored
The device type can now be used to determine the addresses of the audio endpoints for the interface. Drop the conditional logic and make these values properties. Signed-off-by:
-
Chris Rorvick authored
Commit 1027f476 (staging: line6: sync with upstream) removed PCM from the Pocket POD capabilities but left the endpoint configuration. Signed-off-by:
-
Chris Rorvick authored
The device type can now be used to determine the addresses of the control endpoints for the interface. Drop the conditional logic and make these values properties. Signed-off-by:
-
Chris Rorvick authored
The device type can now be used to determine the altsetting for the interface. Drop the conditional logic and make this value a property. Signed-off-by:
-
Chris Rorvick authored
The driver only supports interface 0 of the TonePort UX2 and POD Studio UX2 devices. Use the device table to filter on this. Signed-off-by:
-
Chris Rorvick authored
The driver only supports interface 1 of the Pocket POD. Use the device table to filter on this. Signed-off-by:
-
Chris Rorvick authored
The driver uses a different altsetting depending on the interface. Add device type entries for each of these. Signed-off-by:
-
Chris Rorvick authored
The PODxt Live device has both a POD and a Variax interface. Add device type entries for each of these. Signed-off-by:
-
Chris Rorvick authored
The `LINE6_CAP_CTRL_PCM_HW' macro combines three capabilities to save horizontal space when defining the properties entries. Now that these are no longer limited to single lines this is not such a concern. Specify capabilities individually when defining each property for better clarity. Signed-off-by:
-
Chris Rorvick authored
Specify the index of the properties entry explicitly to define this structure more robustly. Also, drop the `L6PROP' macro in favor of initializing each member explicitly on its own line since horizontal space is limited and more attributes will be added later. Signed-off-by:
-
Chris Rorvick authored
Including "BIT" in the macro name is pointless. Replace with "CAP" to provide some context for what its value represents. Signed-off-by:
-
Chris Rorvick authored
Signed-off-by:
-
Chris Rorvick authored
These are now only used to build the device table. Each entry in this table is already clearly documented as to what device it maps to so the macros become unnecessary indirection. Signed-off-by:
-
Chris Rorvick authored
The driver currently uses the device's idProduct as input to several switch statements. In some cases this is not sufficiently granular and the interface number must be taken into account. Store the device type in `usb_line6' and key off of it instead. New types can then be added that map to specific interfaces on the device so that this conditional logic can be flattened out. Signed-off-by:
-
Chris Rorvick authored
The current logic uses the index of the matched entry from the device table as an offset to the corresponding properties entry. The values of the new `line6_device_type' enum are ordered such that they can be used as an index into either of these arrays. Drop the device entry lookup logic and use the device type (via the .driver_info member) instead. Signed-off-by:
-
Chris Rorvick authored
Define an enum containing the supported devices and associate each entry in the device table to the respective value. Signed-off-by:
-
Chris Rorvick authored
Wrap USB_DEVICE to avoid repeating the Line 6 vendor ID. Signed-off-by:
-
Chris Rorvick authored
Support for these devices appears to have never been completed. Remove them from the device table along with a minimal amount of supporting code. Signed-off-by:
-
Chris Rorvick authored
This function was no longer used as of commit 28079044 (staging: line6: drop MIDI parameter sysfs attrs). Signed-off-by:
-
Chris Rorvick authored
The `device_bit' member was no longer used as of commit 28079044 (staging: line6: drop MIDI parameter sysfs attrs). Signed-off-by:
-
Jonas Lundqvist authored
Fix three space prohibited errors in pcm.h found by checkpatch.pl. Signed-off-by:
Jonas Lundqvist <jonas@gannon.se> Reviewed-by:
Jeremiah Mahler <jmmahler@gmail.com> Signed-off-by:
-
Rickard Strandqvist authored
The NULL check was done to late, and there it was a risk of a possible null pointer dereference. This was partially found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Reviewed-by:
-
- 11 Jan, 2015 9 commits
-
-
Linus Torvalds authored
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Three small fixes from over the Christmas period, and wiring up the new execveat syscall for ARM" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8275/1: mm: fix PMD_SECT_RDONLY undeclared compile error ARM: 8253/1: mm: use phys_addr_t type in map_lowmem() for kernel mem region ARM: 8249/1: mm: dump: don't skip regions ARM: wire up execveat syscall
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "Misc fixes: two vdso fixes, two kbuild fixes and a boot failure fix with certain odd memory mappings" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso: Use asm volatile in __getcpu x86/build: Clean auto-generated processor feature files x86: Fix mkcapflags.sh bash-ism x86: Fix step size adjustment during initial memory mapping x86_64, vdso: Fix the vdso address randomization algorithm
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Misc fixes: group scheduling corner case fix, two deadline scheduler fixes, effective_load() overflow fix, nested sleep fix, 6144 CPUs system fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Fix RCU stall upon -ENOMEM in sched_create_group() sched/deadline: Avoid double-accounting in case of missed deadlines sched/deadline: Fix migration of SCHED_DEADLINE tasks sched: Fix odd values in effective_load() calculations sched, fanotify: Deal with nested sleeps sched: Fix KMALLOC_MAX_SIZE overflow during cpumask allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Mostly tooling fixes, but also some kernel side fixes: uncore PMU driver fix, user regs sampling fix and an instruction decoder fix that unbreaks PEBS precise sampling" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes perf/x86_64: Improve user regs sampling perf: Move task_pt_regs sampling into arch code x86: Fix off-by-one in instruction decoder perf hists browser: Fix segfault when showing callchain perf callchain: Free callchains when hist entries are deleted perf hists: Fix children sort key behavior perf diff: Fix to sort by baseline field by default perf list: Fix --raw-dump option perf probe: Fix crash in dwarf_getcfi_elf perf probe: Fix to fall back to find probe point in symbols perf callchain: Append callchains only when requested perf ui/tui: Print backtrace symbols when segfault occurs perf report: Show progress bar for output resorting
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: "A liblockdep fix and a mutex_unlock() mutex-debugging fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: mutex: Always clear owner field upon mutex_unlock() tools/liblockdep: Fix debug_check thinko in mutex destroy
-
Konstantin Khlebnikov authored
Fix for BUG_ON(anon_vma->degree) splashes in unlink_anon_vmas() ("kernel BUG at mm/rmap.c:399!") caused by commit 7a3ef208 ("mm: prevent endless growth of anon_vma hierarchy") Anon_vma_clone() is usually called for a copy of source vma in destination argument. If source vma has anon_vma it should be already in dst->anon_vma. NULL in dst->anon_vma is used as a sign that it's called from anon_vma_fork(). In this case anon_vma_clone() finds anon_vma for reusing. Vma_adjust() calls it differently and this breaks anon_vma reusing logic: anon_vma_clone() links vma to old anon_vma and updates degree counters but vma_adjust() overrides vma->anon_vma right after that. As a result final unlink_anon_vmas() decrements degree for wrong anon_vma. This patch assigns ->anon_vma before calling anon_vma_clone(). Signed-off-by:Konstantin Khlebnikov <koct9i@gmail.com> Reported-and-tested-by:
Chris Clayton <chris2553@googlemail.com> Reported-and-tested-by:
Oded Gabbay <oded.gabbay@amd.com> Reported-and-tested-by:
Chih-Wei Huang <cwhuang@android-x86.org> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Daniel Forrest <dan.forrest@ssec.wisc.edu> Cc: Michal Hocko <mhocko@suse.cz> Cc: stable@vger.kernel.org # to match back-porting of 7a3ef208Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Commit fee7e49d ("mm: propagate error from stack expansion even for guard page") made sure that we return the error properly for stack growth conditions. It also theorized that counting the guard page towards the stack limit might break something, but also said "Let's see if anybody notices". Somebody did notice. Apparently android-x86 sets the stack limit very close to the limit indeed, and including the guard page in the rlimit check causes the android 'zygote' process problems. So this adds the (fairly trivial) code to make the stack rlimit check be against the actual real stack size, rather than the size of the vma that includes the guard page. Reported-and-tested-by:
-
Ingo Molnar authored
Signed-off-by:Ingo Molnar <mingo@kernel.org>
-
