When the bootstrap and final bpftool have different architectures, we
need to build two distinct disasm.o objects. Add a recipe for the
bootstrap disasm.o.

After commit d510296d ("bpftool: Use syscall/loader program in
"prog load" and "gen skeleton" command.") cross-building bpftool didn't
work anymore, because the bootstrap bpftool was linked using objects
from different architectures:

  $ make O=/tmp/bpftool ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -C tools/bpf/bpftool/ V=1
  [...]
  aarch64-linux-gnu-gcc ... -c -MMD -o /tmp/bpftool/disasm.o /home/z/src/linux/kernel/bpf/disasm.c
  gcc ... -c -MMD -o /tmp/bpftool//bootstrap/main.o main.c
  gcc ... -o /tmp/bpftool//bootstrap/bpftool /tmp/bpftool//bootstrap/main.o ... /tmp/bpftool/disasm.o
  /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183)
  /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183)
  /usr/bin/ld: /tmp/bpftool/disasm.o: Relocations in generic ELF (EM: 183)
  /usr/bin/ld: /tmp/bpftool/disasm.o: error adding symbols: file in wrong format
  collect2: error: ld returned 1 exit status
  [...]

The final bpftool was built for e.g. arm64, while the bootstrap bpftool,
executed on the host, was built for x86. The problem here was that disasm.o
linked into the bootstrap bpftool was arm64 rather than x86. With the fix
we build two disasm.o, one for the target bpftool in arm64, and one for
the bootstrap bpftool in x86.

Fixes: d510296d ("bpftool: Use syscall/loader program in "prog load" and "gen skeleton" command.")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210603170515.1854642-1-jean-philippe@linaro.org

When xdp_redirect_multi test binary was added recently, it wasn't added to
.gitignore. Fix that.

Fixes: d2329247 ("selftests/bpf: Add xdp_redirect_multi test")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210603004026.2698513-5-andrii@kernel.org

Light skeleton code assumes skel_internal.h header to be installed system-wide
by libbpf package. Make sure it is actually installed.

Fixes: 67234743 ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210603004026.2698513-4-andrii@kernel.org

As we gradually get more headers that have to be installed, it's quite
annoying to copy/paste long $(call) commands. So extract that logic and do
a simple $(foreach) over the list of headers.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210603004026.2698513-3-andrii@kernel.org

Official libbpf 0.4 release doesn't include three APIs that were tentatively
put into 0.4 section. Fix libbpf.map and move these three APIs:

  - bpf_map__initial_value;
  - bpf_map_lookup_and_delete_elem_flags;
  - bpf_object__gen_loader.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210603004026.2698513-2-andrii@kernel.org

This patch introduces a new algorithm for multiplication of tristate
numbers (tnums) that is provably sound. It is faster and more precise when
compared to the existing method.

Like the existing method, this new algorithm follows the long
multiplication algorithm. The idea is to generate partial products by
multiplying each bit in the multiplier (tnum a) with the multiplicand
(tnum b), and adding the partial products after appropriately bit-shifting
them. The new algorithm, however, uses just a single loop over the bits of
the multiplier (tnum a) and accumulates only the uncertain components of
the multiplicand (tnum b) into a mask-only tnum. The following paper
explains the algorithm in more detail: https://arxiv.org/abs/2105.05398.

A natural way to construct the tnum product is by performing a tnum
addition on all the partial products. This algorithm presents another
method of doing this: decompose each partial product into two tnums,
consisting of the values and the masks separately. The mask-sum is
accumulated within the loop in acc_m. The value-sum tnum is generated
using a.value * b.value. The tnum constructed by tnum addition of the
value-sum and the mask-sum contains all possible summations of concrete
values drawn from the partial product tnums pairwise. We prove this result
in the paper.

Our evaluations show that the new algorithm is overall more precise
(producing tnums with less uncertain components) than the existing method.
As an illustrative example, consider the input tnums A and B. The numbers
in the parenthesis correspond to (value;mask).

  A                = 000000x1 (1;2)
  B                = 0010011x (38;1)
  A * B (existing) = xxxxxxxx (0;255)
  A * B (new)      = 0x1xxxxx (32;95)

Importantly, we present a proof of soundness of the new algorithm in the
aforementioned paper. Additionally, we show that this new algorithm is
empirically faster than the existing method.
Co-developed-by: Matan Shachnai <m.shachnai@rutgers.edu>
Co-developed-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Co-developed-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Matan Shachnai <m.shachnai@rutgers.edu>
Signed-off-by: Srinivas Narayana <srinivas.narayana@rutgers.edu>
Signed-off-by: Santosh Nagarakatte <santosh.nagarakatte@rutgers.edu>
Signed-off-by: Harishankar Vishwanathan <harishankar.vishwanathan@rutgers.edu>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://arxiv.org/abs/2105.05398
Link: https://lore.kernel.org/bpf/20210531020157.7386-1-harishankar.vishwanathan@rutgers.edu

As Colin pointed out, the first drops assignment after declaration will
be overwritten by the second drops assignment before using, which makes
it useless.

Since the drops variable will be used only once. Just remove it and
use "cnt - sent" in trace_xdp_devmap_xmit().

Fixes: cb261b59 ("bpf: Run devmap xdp_prog on flush instead of bulk enqueue")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210528024356.24333-1-liuhangbin@gmail.com

LLVM upstream commit https://reviews.llvm.org/D102712 made some changes
to bpf relocations to make them llvm linker lld friendly. The scope of
existing relocations R_BPF_64_{64,32} is narrowed and new relocations
R_BPF_64_{ABS32,ABS64,NODYLD32} are introduced.

Let us add some documentation about llvm bpf relocations so people can
understand how to resolve them properly in their respective tools.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210526152457.335210-1-yhs@fb.com

These macros are convenient wrappers around the bpf_seq_printf and
bpf_snprintf helpers. They are currently provided by bpf_tracing.h which
targets low level tracing primitives. bpf_helpers.h is a better fit.

The __bpf_narg and __bpf_apply are needed in both files and provided
twice. __bpf_empty isn't used anywhere and is removed from bpf_tracing.h
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210526164643.2881368-1-revest@chromium.org

Hangbin Liu says:

====================
This patchset is a new implementation for XDP multicast support based
on my previous 2 maps implementation[1]. The reason is that Daniel thinks
the exclude map implementation is missing proper bond support in XDP
context. And there is a plan to add native XDP bonding support. Adding
a exclude map in the helper also increases the complexity of verifier and
has drawbacks on performance.

The new implementation just add two new flags BPF_F_BROADCAST and
BPF_F_EXCLUDE_INGRESS to extend xdp_redirect_map for broadcast support.

With BPF_F_BROADCAST the packet will be broadcasted to all the interfaces
in the map. with BPF_F_EXCLUDE_INGRESS the ingress interface will be
excluded when do broadcasting.

The patchv11 link is here [2].

  [1] https://lore.kernel.org/bpf/20210223125809.1376577-1-liuhangbin@gmail.com
  [2] https://lore.kernel.org/bpf/20210513070447.1878448-1-liuhangbin@gmail.com

v12: As Daniel pointed out:
  a) defined as const u64 for flag_mask and action_mask in
     __bpf_xdp_redirect_map()
  b) remove BPF_F_ACTION_MASK in uapi header
  c) remove EXPORT_SYMBOL_GPL for xdpf_clone()

v11:
  a) Use unlikely() when checking if this is for broadcast redirecting.
  b) Fix a tracepoint NULL pointer issue Jesper found
  c) Remove BPF_F_REDIR_MASK and just use OR flags to make the reader more
     clear about what's flags we are using
  d) Add the performace number with multi veth interfaces in patch 01
     description.
  e) remove some sleeps to reduce the testing time in patch04. Re-struct the
     test and make clear what flags we are testing.

v10: use READ/WRITE_ONCE when read/write map instead of xchg()
v9: Update patch 01 commit description
v8: use hlist_for_each_entry_rcu() when looping the devmap hash ojbs
v7: No need to free xdpf in dev_map_enqueue_clone() if xdpf_clone failed.
v6: Fix a skb leak in the error path for generic XDP
v5: Just walk the map directly to get interfaces as get_next_key() of devmap
    hash may restart looping from the first key if the device get removed.
    After update the performace has improved 10% compired with v4.
v4: Fix flags never cleared issue in patch 02. Update selftest to cover this.
v3: Rebase the code based on latest bpf-next
v2: fix flag renaming issue in patch 02
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Add a bpf selftest for new helper xdp_redirect_map_multi(). In this
test there are 3 forward groups and 1 exclude group. The test will
redirect each interface's packets to all the interfaces in the forward
group, and exclude the interface in exclude map.

Two maps (DEVMAP, DEVMAP_HASH) and two xdp modes (generic, drive) will
be tested. XDP egress program will also be tested by setting pkt src MAC
to egress interface's MAC address.

For more test details, you can find it in the test script. Here is
the test result.
]# time ./test_xdp_redirect_multi.sh
Pass: xdpgeneric arp(F_BROADCAST) ns1-1
Pass: xdpgeneric arp(F_BROADCAST) ns1-2
Pass: xdpgeneric arp(F_BROADCAST) ns1-3
Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-1
Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-2
Pass: xdpgeneric IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-3
Pass: xdpgeneric IPv6 (no flags) ns1-1
Pass: xdpgeneric IPv6 (no flags) ns1-2
Pass: xdpdrv arp(F_BROADCAST) ns1-1
Pass: xdpdrv arp(F_BROADCAST) ns1-2
Pass: xdpdrv arp(F_BROADCAST) ns1-3
Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-1
Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-2
Pass: xdpdrv IPv4 (F_BROADCAST|F_EXCLUDE_INGRESS) ns1-3
Pass: xdpdrv IPv6 (no flags) ns1-1
Pass: xdpdrv IPv6 (no flags) ns1-2
Pass: xdpegress mac ns1-2
Pass: xdpegress mac ns1-3
Summary: PASS 18, FAIL 0

real    1m18.321s
user    0m0.123s
sys     0m0.350s
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210519090747.1655268-5-liuhangbin@gmail.com

This is a sample for xdp redirect broadcast. In the sample we could forward
all packets between given interfaces. There is also an option -X that could
enable 2nd xdp_prog on egress interface.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210519090747.1655268-4-liuhangbin@gmail.com

This patch adds two flags BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS to
extend xdp_redirect_map for broadcast support.

With BPF_F_BROADCAST the packet will be broadcasted to all the interfaces
in the map. with BPF_F_EXCLUDE_INGRESS the ingress interface will be
excluded when do broadcasting.

When getting the devices in dev hash map via dev_map_hash_get_next_key(),
there is a possibility that we fall back to the first key when a device
was removed. This will duplicate packets on some interfaces. So just walk
the whole buckets to avoid this issue. For dev array map, we also walk the
whole map to find valid interfaces.

Function bpf_clear_redirect_map() was removed in
commit ee75aef2 ("bpf, xdp: Restructure redirect actions").
Add it back as we need to use ri->map again.

With test topology:
  +-------------------+             +-------------------+
  | Host A (i40e 10G) |  ---------- | eno1(i40e 10G)    |
  +-------------------+             |                   |
                                    |   Host B          |
  +-------------------+             |                   |
  | Host C (i40e 10G) |  ---------- | eno2(i40e 10G)    |
  +-------------------+             |                   |
                                    |          +------+ |
                                    | veth0 -- | Peer | |
                                    | veth1 -- |      | |
                                    | veth2 -- |  NS  | |
                                    |          +------+ |
                                    +-------------------+

On Host A:
 # pktgen/pktgen_sample03_burst_single_flow.sh -i eno1 -d $dst_ip -m $dst_mac -s 64

On Host B(Intel(R) Xeon(R) CPU E5-2690 v3 @ 2.60GHz, 128G Memory):
Use xdp_redirect_map and xdp_redirect_map_multi in samples/bpf for testing.
All the veth peers in the NS have a XDP_DROP program loaded. The
forward_map max_entries in xdp_redirect_map_multi is modify to 4.

Testing the performance impact on the regular xdp_redirect path with and
without patch (to check impact of additional check for broadcast mode):

5.12 rc4         | redirect_map        i40e->i40e      |    2.0M |  9.7M
5.12 rc4         | redirect_map        i40e->veth      |    1.7M | 11.8M
5.12 rc4 + patch | redirect_map        i40e->i40e      |    2.0M |  9.6M
5.12 rc4 + patch | redirect_map        i40e->veth      |    1.7M | 11.7M

Testing the performance when cloning packets with the redirect_map_multi
test, using a redirect map size of 4, filled with 1-3 devices:

5.12 rc4 + patch | redirect_map multi  i40e->veth (x1) |    1.7M | 11.4M
5.12 rc4 + patch | redirect_map multi  i40e->veth (x2) |    1.1M |  4.3M
5.12 rc4 + patch | redirect_map multi  i40e->veth (x3) |    0.8M |  2.6M
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210519090747.1655268-3-liuhangbin@gmail.com

This changes the devmap XDP program support to run the program when the
bulk queue is flushed instead of before the frame is enqueued. This has
a couple of benefits:

- It "sorts" the packets by destination devmap entry, and then runs the
  same BPF program on all the packets in sequence. This ensures that we
  keep the XDP program and destination device properties hot in I-cache.

- It makes the multicast implementation simpler because it can just
  enqueue packets using bq_enqueue() without having to deal with the
  devmap program at all.

The drawback is that if the devmap program drops the packet, the enqueue
step is redundant. However, arguably this is mostly visible in a
micro-benchmark, and with more mixed traffic the I-cache benefit should
win out. The performance impact of just this patch is as follows:

Using 2 10Gb i40e NIC, redirecting one to another, or into a veth interface,
which do XDP_DROP on veth peer. With xdp_redirect_map in sample/bpf, send
pkts via pktgen cmd:
./pktgen_sample03_burst_single_flow.sh -i eno1 -d $dst_ip -m $dst_mac -t 10 -s 64

There are about +/- 0.1M deviation for native testing, the performance
improved for the base-case, but some drop back with xdp devmap prog attached.

Version          | Test                           | Generic | Native | Native + 2nd xdp_prog
5.12 rc4         | xdp_redirect_map   i40e->i40e  |    1.9M |   9.6M |  8.4M
5.12 rc4         | xdp_redirect_map   i40e->veth  |    1.7M |  11.7M |  9.8M
5.12 rc4 + patch | xdp_redirect_map   i40e->i40e  |    1.9M |   9.8M |  8.0M
5.12 rc4 + patch | xdp_redirect_map   i40e->veth  |    1.7M |  12.0M |  9.4M

When bq_xmit_all() is called from bq_enqueue(), another packet will
always be enqueued immediately after, so clearing dev_rx, xdp_prog and
flush_node in bq_xmit_all() is redundant. Move the clear to __dev_flush(),
and only check them once in bq_enqueue() since they are all modified
together.

This change also has the side effect of extending the lifetime of the
RCU-protected xdp_prog that lives inside the devmap entries: Instead of
just living for the duration of the XDP program invocation, the
reference now lives all the way until the bq is flushed. This is safe
because the bq flush happens at the end of the NAPI poll loop, so
everything happens between a local_bh_disable()/local_bh_enable() pair.
However, this is by no means obvious from looking at the call sites; in
particular, some drivers have an additional rcu_read_lock() around only
the XDP program invocation, which only confuses matters further.
Cleaning this up will be done in a separate patch series.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210519090747.1655268-2-liuhangbin@gmail.com

Andrii Nakryiko says:

====================

Implement error reporting changes discussed in "Libbpf: the road to v1.0"
([0]) document.

Libbpf gets a new API, libbpf_set_strict_mode() which accepts a set of flags
that turn on a set of libbpf 1.0 changes, that might be potentially breaking.
It's possible to opt-in into all current and future 1.0 features by specifying
LIBBPF_STRICT_ALL flag.

When some of the 1.0 "features" are requested, libbpf APIs might behave
differently. In this patch set a first set of changes are implemented, all
related to the way libbpf returns errors. See individual patches for details.

Patch #1 adds a no-op libbpf_set_strict_mode() functionality to enable
updating selftests.

Patch #2 gets rid of all the bad code patterns that will break in libbpf 1.0
(exact -1 comparison for low-level APIs, direct IS_ERR() macro usage to check
pointer-returning APIs for error, etc). These changes make selftest work in
both legacy and 1.0 libbpf modes. Selftests also opt-in into 100% libbpf 1.0
mode to automatically gain all the subsequent changes, which will come in
follow up patches.

Patch #3 streamlines error reporting for low-level APIs wrapping bpf() syscall.

Patch #4 streamlines errors for all the rest APIs.

Patch #5 ensures that BPF skeletons propagate errors properly as well, as
currently on error some APIs will return NULL with no way of checking exact
error code.

  [0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTY

v1->v2:
  - move libbpf_set_strict_mode() implementation to patch #1, where it belongs
    (Alexei);
  - add acks, slight rewording of commit messages.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Follow libbpf's error handling conventions and pass through errors and errno
properly. Skeleton code always returned NULL on errors (not ERR_PTR(err)), so
there are no backwards compatibility concerns. But now we also set errno
properly, so it's possible to distinguish different reasons for failure, if
necessary.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-6-andrii@kernel.org

Implement changes to error reporting for high-level libbpf APIs to make them
less surprising and less error-prone to users:
  - in all the cases when error happens, errno is set to an appropriate error
    value;
  - in libbpf 1.0 mode, all pointer-returning APIs return NULL on error and
    error code is communicated through errno; this applies both to APIs that
    already returned NULL before (so now they communicate more detailed error
    codes), as well as for many APIs that used ERR_PTR() macro and encoded
    error numbers as fake pointers.
  - in legacy (default) mode, those APIs that were returning ERR_PTR(err),
    continue doing so, but still set errno.

With these changes, errno can be always used to extract actual error,
regardless of legacy or libbpf 1.0 modes. This is utilized internally in
libbpf in places where libbpf uses it's own high-level APIs.
libbpf_get_error() is adapted to handle both cases completely transparently to
end-users (and is used by libbpf consistently as well).

More context, justification, and discussion can be found in "Libbpf: the road
to v1.0" document ([0]).

  [0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTYSigned-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-5-andrii@kernel.org

Ensure that low-level APIs behave uniformly across the libbpf as follows:
  - in case of an error, errno is always set to the correct error code;
  - when libbpf 1.0 mode is enabled with LIBBPF_STRICT_DIRECT_ERRS option to
    libbpf_set_strict_mode(), return -Exxx error value directly, instead of -1;
  - by default, until libbpf 1.0 is released, keep returning -1 directly.

More context, justification, and discussion can be found in "Libbpf: the road
to v1.0" document ([0]).

  [0] https://docs.google.com/document/d/1UyjTZuPFWiPFyKk1tV5an11_iaRuec6U-ZESZ54nNTYSigned-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-4-andrii@kernel.org

Turn ony libbpf 1.0 mode. Fix all the explicit IS_ERR checks that now will be
broken because libbpf returns NULL on error (and sets errno). Fix
ASSERT_OK_PTR and ASSERT_ERR_PTR to work for both old mode and new modes and
use them throughout selftests. This is trivial to do by using
libbpf_get_error() API that all libbpf users are supposed to use, instead of
IS_ERR checks.

A bunch of checks also did explicit -1 comparison for various fd-returning
APIs. Such checks are replaced with >= 0 or < 0 cases.

There were also few misuses of bpf_object__find_map_by_name() in test_maps.
Those are fixed in this patch as well.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-3-andrii@kernel.org

Add libbpf_set_strict_mode() API that allows application to simulate libbpf
1.0 breaking changes before libbpf 1.0 is released. This will help users
migrate gradually and with confidence.

For now only ALL or NONE options are available, subsequent patches will add
more flags. This patch is preliminary for selftests/bpf changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20210525035935.1461796-2-andrii@kernel.org

Use kvcalloc() instead of kcalloc() to support large umems with, on my
server, one million pages or more in the umem.
Reported-by: Dan Siemon <dan@coverfire.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210521083301.26921-1-magnus.karlsson@gmail.com

Fix some spelling mistakes in comments:
aother ==> another
Netiher ==> Neither
desribe ==> describe
intializing ==> initializing
funciton ==> function
wont ==> won't and move the word 'the' at the end to the next line
accross ==> across
pathes ==> paths
triggerred ==> triggered
excute ==> execute
ether ==> either
conervative ==> conservative
convetion ==> convention
markes ==> marks
interpeter ==> interpreter
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210525025659.8898-2-thunder.leizhen@huawei.com

The opening comment mark '/**' is used for highlighting the beginning of
kernel-doc comments.
The header for samples/bpf/ibumad_kern.c follows this syntax, but
the content inside does not comply with kernel-doc.

This line was probably not meant for kernel-doc parsing, but is parsed
due to the presence of kernel-doc like comment syntax(i.e, '/**'), which
causes unexpected warnings from kernel-doc:
warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * ibumad BPF sample kernel side

Provide a simple fix by replacing this occurrence with general comment
format, i.e. '/*', to prevent kernel-doc from parsing it.
Signed-off-by: Aditya Srivastava <yashsri421@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/bpf/20210523151408.22280-1-yashsri421@gmail.com

LLVM patch https://reviews.llvm.org/D102712
narrowed the scope of existing R_BPF_64_64
and R_BPF_64_32 relocations, and added three
new relocations, R_BPF_64_ABS64, R_BPF_64_ABS32
and R_BPF_64_NODYLD32. The main motivation is
to make relocations linker friendly.

This change, unfortunately, breaks libbpf build,
and we will see errors like below:
  libbpf: ELF relo #0 in section #6 has unexpected type 2 in
     /home/yhs/work/bpf-next/tools/testing/selftests/bpf/bpf_tcp_nogpl.o
  Error: failed to link
     '/home/yhs/work/bpf-next/tools/testing/selftests/bpf/bpf_tcp_nogpl.o':
     Unknown error -22 (-22)
The new relocation R_BPF_64_ABS64 is generated
and libbpf linker sanity check doesn't understand it.
Relocation section '.rel.struct_ops' at offset 0x1410 contains 1 entries:
    Offset             Info             Type               Symbol's Value  Symbol's Name
0000000000000018  0000000700000002 R_BPF_64_ABS64         0000000000000000 nogpltcp_init

Look at the selftests/bpf/bpf_tcp_nogpl.c,
  void BPF_STRUCT_OPS(nogpltcp_init, struct sock *sk)
  {
  }

  SEC(".struct_ops")
  struct tcp_congestion_ops bpf_nogpltcp = {
          .init           = (void *)nogpltcp_init,
          .name           = "bpf_nogpltcp",
  };
The new llvm relocation scheme categorizes 'nogpltcp_init' reference
as R_BPF_64_ABS64 instead of R_BPF_64_64 which is used to specify
ld_imm64 relocation in the new scheme.

Let us fix the linker sanity checking by including
R_BPF_64_ABS64 and R_BPF_64_ABS32. There is no need to
check R_BPF_64_NODYLD32 which is used for .BTF and .BTF.ext.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210522162341.3687617-1-yhs@fb.com

Denis Salopek says:

====================

This patch series extends the existing bpf_map_lookup_and_delete_elem()
functionality with 4 more map types:
 - BPF_MAP_TYPE_HASH,
 - BPF_MAP_TYPE_PERCPU_HASH,
 - BPF_MAP_TYPE_LRU_HASH and
 - BPF_MAP_TYPE_LRU_PERCPU_HASH.

Patch 1 adds most of its functionality and logic as well as
documentation.

As it was previously limited to only stacks and queues which do not
support the BPF_F_LOCK flag, patch 2 enables its usage by adding a new
libbpf API bpf_map_lookup_and_delete_elem_flags() based on the existing
bpf_map_lookup_elem_flags().

Patch 3 adds selftests for lookup_and_delete_elem().

Changes in patch 1:
v7: Minor formating nits, add Acked-by.
v6: Remove unneeded flag check, minor code/format fixes.
v5: Split patch to 3 patches. Extend BPF_MAP_LOOKUP_AND_DELETE_ELEM
documentation with this changes.
v4: Fix the return value for unsupported map types.
v3: Add bpf_map_lookup_and_delete_elem_flags() and enable BPF_F_LOCK
flag, change CHECKs to ASSERT_OKs, initialize variables to 0.
v2: Add functionality for LRU/per-CPU, add test_progs tests.

Changes in patch 2:
v7: No change.
v6: Add Acked-by.
v5: Move to the newest libbpf version (0.4.0).

Changes in patch 3:
v7: Remove ASSERT_GE macro which is already added in some other commit,
change ASSERT_OK to ASSERT_OK_PTR, add Acked-by.
v6: Remove PERCPU macros, add ASSERT_GE macro to test_progs.h, remove
leftover code.
v5: Use more appropriate macros. Better check for changed value.
====================
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

Add bpf selftests and extend existing ones for a new function
bpf_lookup_and_delete_elem() for (percpu) hash and (percpu) LRU hash map
types.
In test_lru_map and test_maps we add an element, lookup_and_delete it,
then check whether it's deleted.
The newly added lookup_and_delete prog tests practically do the same
thing but additionally use a BPF program to change the value of the
element for LRU maps.
Signed-off-by: Denis Salopek <denis.salopek@sartura.hr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/d30d3e0060c1f750e133579623cf1c60ff58f3d9.1620763117.git.denis.salopek@sartura.hr

Add bpf_map_lookup_and_delete_elem_flags() libbpf API in order to use
the BPF_F_LOCK flag with the map_lookup_and_delete_elem() function.
Signed-off-by: Denis Salopek <denis.salopek@sartura.hr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/15b05dafe46c7e0750d110f233977372029d1f62.1620763117.git.denis.salopek@sartura.hr

Extend the existing bpf_map_lookup_and_delete_elem() functionality to
hashtab map types, in addition to stacks and queues.
Create a new hashtab bpf_map_ops function that does lookup and deletion
of the element under the same bucket lock and add the created map_ops to
bpf.h.
Signed-off-by: Denis Salopek <denis.salopek@sartura.hr>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/4d18480a3e990ffbf14751ddef0325eed3be2966.1620763117.git.denis.salopek@sartura.hr

I'm getting the following error when running 'gen skeleton -L' as
regular user:

libbpf: Error in bpf_object__probe_loading():Operation not permitted(1).
Couldn't load trivial BPF program. Make sure your kernel supports BPF
(CONFIG_BPF_SYSCALL=y) and/or that RLIMIT_MEMLOCK is set to big enough
value.

Fixes: 67234743 ("libbpf: Generate loader program out of BPF ELF file.")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210521030653.2626513-1-sdf@google.com

Issue identified with Coccinelle.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use phy_ethtool_nway_reset() since the driver makes use of the PHY
library.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: r6040: Non-functional changes

These two patches clean up the r6040 driver a little bit in preparation
for adding additional features such as dumping MAC counters and properly
dealing with DMA-API mapping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of the open coded constant 4.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is not a functional change, but we should be using a logical or to
assign the bits we will be writing to the MDIO read and write registers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variables will be free on path err_phy_connect, it should
return error code, or it will cause double free when calling
ftgmac100_remove().

Fixes: bd466c3f ("net/faraday: Support NCSI mode")
Fixes: 39bfab88 ("net: ftgmac100: Add support for DT phy-handle property")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When booting a board with DPAA2 interfaces defined statically via DPL
(as opposed to creating them dynamically using restool), the driver will
print an unspecific error message.

This change adds the error code to the message, and avoids printing
altogether if the error code is EPROBE_DEFER, because that is not a
cause of alarm.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ioana Ciornei says:

====================
dpaa2-eth: setup the of_node

This patch set allows DSA to work with a DPAA2 master device by setting
up the of_node to point to the corresponding MAC DTS node, so that
of_find_net_device_by_node() can find it.
As an added benefit, udev rules can now be used to create a naming
scheme based on the physical MAC.

The second patch renames the debugfs directory to use the DPNI name
instead of the netdev name, since the latter can be changed after probe
time.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>