- 10 Feb, 2021 7 commits
-
-
Nicholas Piggin authored
Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Nicholas Piggin authored
The slbmte instruction is legal in radix mode, including radix guest mode. This means radix guests can load the SLB with arbitrary data. KVM host does not clear the SLB when exiting a guest if it was a radix guest, which would allow a rogue radix guest to use the SLB as a side channel to communicate with other guests. Fix this by ensuring the SLB is cleared when coming out of a radix guest. Only the first 4 entries are a concern, because radix guests always run with LPCR[UPRT]=1, which limits the reach of slbmte. slbia is not used (except in a non-performance-critical path) because it can clear cached translations. Signed-off-by:
Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by:
-
Nicholas Piggin authored
This reverts much of commit c0101509 ("KVM: PPC: Book3S HV: Run HPT guests on POWER9 radix hosts"), which was required to run HPT guests on RPT hosts on early POWER9 CPUs without support for "mixed mode", which meant the host could not run with MMU on while guests were running. This code has some corner case bugs, e.g., when the guest hits a machine check or HMI the primary locks up waiting for secondaries to switch LPCR to host, which they never do. This could all be fixed in software, but most CPUs in production have mixed mode support, and those that don't are believed to be all in installations that don't use this capability. So simplify things and remove support. Signed-off-by:
-
Ravi Bangoria authored
Introduce KVM_CAP_PPC_DAWR1 which can be used by QEMU to query whether KVM supports 2nd DAWR or not. The capability is by default disabled even when the underlying CPU supports 2nd DAWR. QEMU needs to check and enable it manually to use the feature. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
-
Ravi Bangoria authored
KVM code assumes single DAWR everywhere. Add code to support 2nd DAWR. DAWR is a hypervisor resource and thus H_SET_MODE hcall is used to set/ unset it. Introduce new case H_SET_MODE_RESOURCE_SET_DAWR1 for 2nd DAWR. Also, KVM will support 2nd DAWR only if CPU_FTR_DAWR1 is set. Signed-off-by:
-
Ravi Bangoria authored
Power10 is introducing a second DAWR (Data Address Watchpoint Register). Use real register names (with suffix 0) from ISA for current macros and variables used by kvm. One exception is KVM_REG_PPC_DAWR. Keep it as it is because it's uapi so changing it will break userspace. Signed-off-by:
-
Ravi Bangoria authored
On powerpc, L1 hypervisor takes help of L0 using H_ENTER_NESTED hcall to load L2 guest state in cpu. L1 hypervisor prepares the L2 state in struct hv_guest_state and passes a pointer to it via hcall. Using that pointer, L0 reads/writes that state directly from/to L1 memory. Thus L0 must be aware of hv_guest_state layout of L1. Currently it uses version field to achieve this. i.e. If L0 hv_guest_state.version != L1 hv_guest_state.version, L0 won't allow nested kvm guest. This restriction can be loosened up a bit. L0 can be taught to understand older layout of hv_guest_state, if we restrict the new members to be added only at the end, i.e. we can allow nested guest even when L0 hv_guest_state.version > L1 hv_guest_state.version. Though, the other way around is not possible. Signed-off-by:
-
- 09 Feb, 2021 30 commits
-
-
Paolo Bonzini authored
Documentation/virt/kvm/api.rst:4927: WARNING: Title underline too short. 4.130 KVM_XEN_VCPU_GET_ATTR -------------------------- Fixes: e1f68169 ("KVM: Add documentation for Xen hypercall and shared_info updates") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
In order to support Xen SHUTDOWN_soft_reset (for guest kexec, etc.) the VMM needs to be able to tear everything down and return the Xen features to a clean slate. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20210208232326.1830370-1-dwmw2@infradead.org> Signed-off-by:
-
Maciej S. Szmigiero authored
When retpolines are enabled they have high overhead in the inner loop inside kvm_handle_hva_range() that iterates over the provided memory area. Let's mark this function and its TDP MMU equivalent __always_inline so compiler will be able to change the call to the actual handler function inside each of them into a direct one. This significantly improves performance on the unmap test on the existing kernel memslot code (tested on a Xeon 8167M machine): 30 slots in use: Test Before After Improvement Unmap 0.0353s 0.0334s 5% Unmap 2M 0.00104s 0.000407s 61% 509 slots in use: Test Before After Improvement Unmap 0.0742s 0.0740s None Unmap 2M 0.00221s 0.00159s 28% Looks like having an indirect call in these functions (and, so, a retpoline) might have interfered with unrolling of the whole loop in the CPU. Signed-off-by:
Maciej S. Szmigiero <maciej.szmigiero@oracle.com> Message-Id: <732d3fe9eb68aa08402a638ab0309199fa89ae56.1612810129.git.maciej.szmigiero@oracle.com> Signed-off-by:
-
Vitaly Kuznetsov authored
hv_vcpu_to_vcpu() helper is only used by other helpers and is not very complex, we can drop it without much regret. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20210126134816.1880136-16-vkuznets@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Hyper-V context is only needed for guests which use Hyper-V emulation in KVM (e.g. Windows/Hyper-V guests) so we don't actually need to allocate it in kvm_arch_vcpu_create(), we can postpone the action until Hyper-V specific MSRs are accessed or SynIC is enabled. Once allocated, let's keep the context alive for the lifetime of the vCPU as an attempt to free it would require additional synchronization with other vCPUs and normally it is not supposed to happen. Note, Hyper-V style hypercall enablement is done by writing to HV_X64_MSR_GUEST_OS_ID so we don't need to worry about allocating Hyper-V context from kvm_hv_hypercall(). Signed-off-by:
-
Vitaly Kuznetsov authored
Hyper-V emulation is enabled in KVM unconditionally. This is bad at least from security standpoint as it is an extra attack surface. Ideally, there should be a per-VM capability explicitly enabled by VMM but currently it is not the case and we can't mandate one without breaking backwards compatibility. We can, however, check guest visible CPUIDs and only enable Hyper-V emulation when "Hv#1" interface was exposed in HYPERV_CPUID_INTERFACE. Note, VMMs are free to act in any sequence they like, e.g. they can try to set MSRs first and CPUIDs later so we still need to allow the host to read/write Hyper-V specific MSRs unconditionally. Signed-off-by:
-
Vitaly Kuznetsov authored
Hyper-V context is only needed for guests which use Hyper-V emulation in KVM (e.g. Windows/Hyper-V guests). 'struct kvm_vcpu_hv' is, however, quite big, it accounts for more than 1/4 of the total 'struct kvm_vcpu_arch' which is also quite big already. This all looks like a waste. Allocate 'struct kvm_vcpu_hv' dynamically. This patch does not bring any (intentional) functional change as we still allocate the context unconditionally but it paves the way to doing that only when needed. Signed-off-by:
-
Vitaly Kuznetsov authored
Currently, Hyper-V context is part of 'struct kvm_vcpu_arch' and is always available. As a preparation to allocating it dynamically, check that it is not NULL at call sites which can normally proceed without it i.e. the behavior is identical to the situation when Hyper-V emulation is not being used by the guest. When Hyper-V context for a particular vCPU is not allocated, we may still need to get 'vp_index' from there. E.g. in a hypothetical situation when Hyper-V emulation was enabled on one CPU and wasn't on another, Hyper-V style send-IPI hypercall may still be used. Luckily, vp_index is always initialized to kvm_vcpu_get_idx() and can only be changed when Hyper-V context is present. Introduce kvm_hv_get_vpindex() helper for simplification. No functional change intended. Signed-off-by:
-
Vitaly Kuznetsov authored
As a preparation to allocating Hyper-V context dynamically, make it clear who's the user of the said context. No functional change intended. Signed-off-by:
-
Vitaly Kuznetsov authored
'current_vcpu' variable in KVM is a per-cpu pointer to the currently scheduled vcpu. kvm_hv_flush_tlb()/kvm_hv_send_ipi() functions used to have local 'vcpu' variable to iterate over vCPUs but it's gone now and there's no need to use anything but the standard 'vcpu' as an argument. Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Spelling '&kvm->arch.hyperv' correctly is hard. Also, this makes the code more consistent with vmx/svm where to_kvm_vmx()/to_kvm_svm() are already being used. Opportunistically change kvm_hv_msr_{get,set}_crash_{data,ctl}() and kvm_hv_msr_set_crash_data() to take 'kvm' instead of 'vcpu' as these MSRs are partition wide. No functional change intended. Suggested-by: -
Vitaly Kuznetsov authored
vcpu_to_hv_syndbg()'s argument is always 'vcpu' so there's no need to have an additional prefix. Also, this makes the code more consistent with vmx/svm where to_vmx()/to_svm() are being used. No functional change intended. Suggested-by:
-
Vitaly Kuznetsov authored
vcpu_to_stimers()'s argument is almost always 'vcpu' so there's no need to have an additional prefix. Also, this makes the naming more consistent with to_hv_vcpu()/to_hv_synic(). Rename stimer_to_vcpu() to hv_stimer_to_vcpu() for consitency. No functional change intended. Suggested-by:
-
Vitaly Kuznetsov authored
vcpu_to_synic()'s argument is almost always 'vcpu' so there's no need to have an additional prefix. Also, as this is used outside of hyper-v emulation code, add '_hv_' part to make it clear what this s. This makes the naming more consistent with to_hv_vcpu(). Rename synic_to_vcpu() to hv_synic_to_vcpu() for consistency. No functional change intended. Suggested-by:
-
Vitaly Kuznetsov authored
vcpu_to_hv_vcpu()'s argument is almost always 'vcpu' so there's no need to have an additional prefix. Also, this makes the code more consistent with vmx/svm where to_vmx()/to_svm() are being used. No functional change intended. Suggested-by:
-
Vitaly Kuznetsov authored
kvm_hv_vapic_assist_page_enabled() seems to be unused since its introduction in commit 10388a07 ("KVM: Add HYPER-V apic access MSRs"), drop it. Reported-by:
-
Vitaly Kuznetsov authored
Generally, when Hyper-V emulation is enabled, VMM is supposed to set Hyper-V CPUID identifications so the guest knows that Hyper-V features are available. evmcs_test doesn't currently do that but so far Hyper-V emulation in KVM was enabled unconditionally. As we are about to change that, proper Hyper-V CPUID identification should be set in selftests as well. Signed-off-by:
-
Vitaly Kuznetsov authored
kvm_get_supported_hv_cpuid() may come handy in all Hyper-V related tests. Split it off hyperv_cpuid test, create system-wide and vcpu versions. Signed-off-by:
-
Vitaly Kuznetsov authored
Current KVM_USER_MEM_SLOTS limits are arch specific (512 on Power, 509 on x86, 32 on s390, 16 on MIPS) but they don't really need to be. Memory slots are allocated dynamically in KVM when added so the only real limitation is 'id_to_index' array which is 'short'. We don't have any other KVM_MEM_SLOTS_NUM/KVM_USER_MEM_SLOTS-sized statically defined structures. Low KVM_USER_MEM_SLOTS can be a limiting factor for some configurations. In particular, when QEMU tries to start a Windows guest with Hyper-V SynIC enabled and e.g. 256 vCPUs the limit is hit as SynIC requires two pages per vCPU and the guest is free to pick any GFN for each of them, this fragments memslots as QEMU wants to have a separate memslot for each of these pages (which are supposed to act as 'overlay' pages). Signed-off-by:
-
Vitaly Kuznetsov authored
With the updated maximum number of user memslots (32) set_memory_region_test sometimes takes longer than the default 45 seconds to finish. Raise the value to an arbitrary 120 seconds. Signed-off-by:
-
Paolo Bonzini authored
Push the injection of #GP up to the callers, so that they can just use kvm_complete_insn_gp. __kvm_set_dr is pretty much what the callers can use together with kvm_complete_insn_gp, so rename it to kvm_set_dr and drop the old kvm_set_dr wrapper. This also allows nested VMX code, which really wanted to use __kvm_set_dr, to use the right function. While at it, remove the kvm_require_dr() check from the SVM interception. The APM states: All normal exception checks take precedence over the SVM intercepts. which includes the CR4.DE=1 #UD. Signed-off-by: -
Paolo Bonzini authored
kvm_get_dr and emulator_get_dr except an in-range value for the register number so they cannot fail. Change the return type to void. Suggested-by:
-
Sean Christopherson authored
Drop a defunct forward declaration of svm_complete_interrupts(). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add a helper function to handle kicking non-running vCPUs when sending virtual IPIs. A future patch will change SVM's interception functions to take @vcpu instead of @svm, at which piont declaring and modifying 'vcpu' in a case statement is confusing, and potentially dangerous. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Restore the full 64-bit values of DR6 and DR7 when emulating RSM on x86-64, as defined by both Intel's SDM and AMD's APM. Note, bits 63:32 of DR6 and DR7 are reserved, so this is a glorified nop unless the SMM handler is poking into SMRAM, which it most definitely shouldn't be doing since both Intel and AMD list the DR6 and DR7 fields as read-only. Fixes: 660a5d51 ("KVM: x86: save/load state on SMM switch") Signed-off-by:
-
Sean Christopherson authored
Drop the DR6/7 volatile+fixed bits adjustments in RSM emulation, which are redundant and misleading. The necessary adjustments are made by kvm_set_dr(), which properly sets the fixed bits that are conditional on the vCPU model. Note, KVM incorrectly reads only bits 31:0 of the DR6/7 fields when emulating RSM on x86-64. On the plus side for this change, that bug makes removing "& DRx_VOLATILE" a nop. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use hva_t, a.k.a. unsigned long, for the local variable that holds the hypercall page address. On 32-bit KVM, gcc complains about using a u64 due to the implicit cast from a 64-bit value to a 32-bit pointer. arch/x86/kvm/xen.c: In function ‘kvm_xen_write_hypercall_page’: arch/x86/kvm/xen.c:300:22: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] 300 | page = memdup_user((u8 __user *)blob_addr, PAGE_SIZE); Cc: Joao Martins <joao.m.martins@oracle.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Fixes: 23200b7a ("KVM: x86/xen: intercept xen hypercalls if enabled") Signed-off-by:Joao Martins <joao.m.martins@oracle.com> Signed-off-by:
-
David Woodhouse authored
This accidentally ended up locking and then immediately unlocking kvm->lock at the beginning of the function. Fix it. Fixes: a76b9641 ("KVM: x86/xen: add KVM_XEN_HVM_SET_ATTR/KVM_XEN_HVM_GET_ATTR") Signed-off-by:
-
Sean Christopherson authored
Use kvm_pfn_t, a.k.a. u64, for the local 'pfn' variable when retrieving a so called "remapped" hva/pfn pair. In theory, the hva could resolve to a pfn in high memory on a 32-bit kernel. This bug was inadvertantly exposed by commit bd2fae8d ("KVM: do not assume PTE is writable after follow_pfn"), which added an error PFN value to the mix, causing gcc to comlain about overflowing the unsigned long. arch/x86/kvm/../../../virt/kvm/kvm_main.c: In function ‘hva_to_pfn_remapped’: include/linux/kvm_host.h:89:30: error: conversion from ‘long long unsigned int’ to ‘long unsigned int’ changes value from ‘9218868437227405314’ to ‘2’ [-Werror=overflow] 89 | #define KVM_PFN_ERR_RO_FAULT (KVM_PFN_ERR_MASK + 2) | ^ virt/kvm/kvm_main.c:1935:9: note: in expansion of macro ‘KVM_PFN_ERR_RO_FAULT’ Cc: stable@vger.kernel.org Fixes: add6a0cd ("KVM: MMU: try to fix up page faults before giving up") Signed-off-by:
-
Paolo Bonzini authored
Currently, the follow_pfn function is exported for modules but follow_pte is not. However, follow_pfn is very easy to misuse, because it does not provide protections (so most of its callers assume the page is writable!) and because it returns after having already unlocked the page table lock. Provide instead a simplified version of follow_pte that does not have the pmdpp and range arguments. The older version survives as follow_invalidate_pte() for use by fs/dax.c. Reviewed-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
-
- 08 Feb, 2021 2 commits
-
-
Paolo Bonzini authored
The TDP MMU assumes that it can do atomic accesses to 64-bit PTEs. Rather than just disabling it, compile it out completely so that it is possible to use for example 64-bit xchg. To limit the number of stubs, wrap all accesses to tdp_mmu_enabled or tdp_mmu_page with a function. Calls to all other functions in tdp_mmu.c are eliminated and do not even reach the linker. Reviewed-by:
-
Paolo Bonzini authored
Adjust the KVMGT page tracking callbacks. Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: intel-gvt-dev@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Signed-off-by:
-
- 04 Feb, 2021 1 commit
-
-
Sean Christopherson authored
Add a helper to generate the mask of reserved GPA bits _without_ any adjustments for repurposed bits, and use it to replace a variety of open coded variants in the MTRR and APIC_BASE flows. No functional change intended. Signed-off-by:
-
