An error occurred fetching the project authors.
- 09 Dec, 2020 2 commits
-
-
Quinn Tran authored
FC-NVMe target discovery failed when initiator wwpn < target wwpn in an N2N (Direct Attach) config, where the driver was stuck on FCP PRLI mode and failed to retry with NVMe PRLI. Link: https://lore.kernel.org/r/20201202132312.19966-10-njavali@marvell.com Fixes: 84ed362a ("scsi: qla2xxx: Dual FCP-NVMe target port support”) Fixes: 983f1276 ("scsi: qla2xxx: Retry PLOGI on FC-NVMe PRLI failure”) Signed-off-by:
Quinn Tran <qutran@marvell.com> Signed-off-by:
Nilesh Javali <njavali@marvell.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Arun Easi authored
Some fields are not correctly byte swapped causing failure during initialization. As probe() returns failure, HBAs will not be claimed when this happens. qla2xxx [0007:01:00.0]-ffff:3: Secure Flash Update in FW: Supported qla2xxx [0007:01:00.0]-ffff:3: SCM in FW: Supported qla2xxx [0007:01:00.0]-00d2:3: Init Firmware **** FAILED ****. qla2xxx [0007:01:00.0]-00d6:3: Failed to initialize adapter - Adapter flags 2. qla2xxx 0007:01:00.1: enabling device (0140 -> 0142) qla2xxx [0007:01:00.1]-011c: : MSI-X vector count: 128. qla2xxx [0007:01:00.1]-001d: : Found an ISP2289 irq 18 iobase 0xd000080080004000. qla2xxx 0007:01:00.1: Using 64-bit direct DMA at offset 800000000000000 BUG: Bad page state in process insmod pfn:67118 page:f00000000168bd40 count:-1 mapcount:0 mapping: (null) index:0x0 page flags: 0x3ffff800000000() page dumped because: nonzero _count Modules linked in: qla2xxx(OE+) nvme_fc nvme_fabrics nvme_core scsi_transport_fc scsi_tgt nls_utf8 isofs ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter nx_crypto ses enclosure scsi_transport_sas pseries_rng sg ip_tables xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_generic crct10dif_common usb_storage ipr libata tg3 ptp pps_core dm_mirror dm_region_hash dm_log dm_mod CPU: 32 PID: 8560 Comm: insmod Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.ppc64 #1 Call Trace: [c0000006dd7caa70] [c00000000001cca8] .show_stack+0x88/0x330 (unreliable) [c0000006dd7cab30] [c000000000ac3d88] .dump_stack+0x28/0x3c [c0000006dd7caba0] [c00000000029e48c] .bad_page+0x15c/0x1c0 [c0000006dd7cac40] [c00000000029f938] .get_page_from_freelist+0x11e8/0x1ea0 [c0000006dd7caf40] [c0000000002a1d30] .__alloc_pages_nodemask+0x1c0/0xc70 [c0000006dd7cb140] [c00000000002ba0c] .__dma_direct_alloc_coherent+0x8c/0x170 [c0000006dd7cb1e0] [d000000010a94688] .qla2x00_mem_alloc+0x10f8/0x1370 [qla2xxx] [c0000006dd7cb2d0] [d000000010a9c790] .qla2x00_probe_one+0xb60/0x22e0 [qla2xxx] [c0000006dd7cb540] [c0000000005de764] .pci_device_probe+0x204/0x300 [c0000006dd7cb600] [c0000000006ca61c] .driver_probe_device+0x2cc/0x6f0 [c0000006dd7cb6b0] [c0000000006cabec] .__driver_attach+0x10c/0x110 [c0000006dd7cb740] [c0000000006c5f04] .bus_for_each_dev+0x94/0x100 [c0000006dd7cb7e0] [c0000000006c94f4] .driver_attach+0x34/0x50 [c0000006dd7cb860] [c0000000006c8f58] .bus_add_driver+0x298/0x3b0 [c0000006dd7cb900] [c0000000006cb6e0] .driver_register+0xb0/0x1a0 [c0000006dd7cb980] [c0000000005dc474] .__pci_register_driver+0xc4/0xf0 [c0000006dd7cba10] [d000000010b94e20] .qla2x00_module_init+0x2a8/0x328 [qla2xxx] [c0000006dd7cbaa0] [c00000000000c130] .do_one_initcall+0x130/0x2e0 [c0000006dd7cbb50] [c0000000001b2e8c] .load_module+0x1afc/0x2340 [c0000006dd7cbd40] [c0000000001b3920] .SyS_finit_module+0xd0/0x130 [c0000006dd7cbe30] [c00000000000a284] system_call+0x38/0xfc Link: https://lore.kernel.org/r/20201202132312.19966-9-njavali@marvell.com Fixes: 9f2475fe ("scsi: qla2xxx: SAN congestion management implementation") Fixes: cf3c54fb ("scsi: qla2xxx: Add SLER and PI control support”) Reviewed-by:
Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by:
Arun Easi <aeasi@marvell.com> Signed-off-by:
-
- 26 Oct, 2020 1 commit
-
-
Tom Rix authored
A break is not needed if it is preceded by a return or goto. Link: https://lore.kernel.org/r/20201019142333.16584-1-trix@redhat.comSigned-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
-
- 30 Sep, 2020 2 commits
-
-
Arun Easi authored
Driver was using a shorter timeout waiting for PLOGI from the peer in point-to-point configurations. Some devices takes some time (~4 seconds) to initiate the PLOGI. This peer initiating PLOGI is when the peer has a higher P-WWN. Increase the wait time based on N2N R_A_TOV. Link: https://lore.kernel.org/r/20200929102152.32278-7-njavali@marvell.comReviewed-by:
-
Quinn Tran authored
Current code uses wrong mailbox option to extract bbc from firmware. This field is nested inside of PLOGI payload. Extract bbc from PLOGI template payload. Link: https://lore.kernel.org/r/20200929102152.32278-3-njavali@marvell.comReviewed-by:
-
- 22 Sep, 2020 2 commits
-
-
Saurav Kashyap authored
BIT_13 of extended FW attribute informs about NVMe-2 support. Set BIT_15 of special feature control block for enabling SLER in FW. Set bit 8 (SLER supported) to 1 for the service parameter information when sending NVMe PRLI request. Set BIT_14 of special feature control block for enabling PI Control in FW. Driver should set bit 9 (PI Control supported) to 1 for the service parameter information when sending NVMe PRLI request. Set BIT_13 for NVMe Async events. Link: https://lore.kernel.org/r/20200904045128.23631-13-njavali@marvell.comReviewed-by:
Saurav Kashyap <skashyap@marvell.com> Signed-off-by:
-
Quinn Tran authored
Memory size calculations for Extended Login used in hardware offload got truncated. Fix this by changing definition of exlogin_size to use uint32_t. Link: https://lore.kernel.org/r/20200904045128.23631-7-njavali@marvell.comReviewed-by:
-
- 16 Sep, 2020 1 commit
-
-
Thomas Gleixner authored
All files in this driver directory contain the following notice: See LICENSE.qla2xxx for copyright and licensing details. LICENSE.qla2xxx can be found in Documentation/scsi/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qla2xxx file. Reviewed-by:Richard Fontana <rfontana@redhat.com> Reviewed-by:
Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by:
Alexios Zavras <alexios.zavras@intel.com> Acked-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 Aug, 2020 1 commit
-
-
Christophe JAILLET authored
Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()'. [mkp: removed memset() hunk that has already been addressed] Link: https://lore.kernel.org/r/20200802110721.677707-1-christophe.jaillet@wanadoo.fr Fixes: 4161cee5 ("[SCSI] qla4xxx: Add host statistics support") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
- 21 Aug, 2020 1 commit
-
-
Li Heng authored
Fixes coccicheck warning: ./drivers/scsi/qla2xxx/qla_mbx.c:4928:15-33: WARNING: dma_alloc_coherent use in els_cmd_map already zeroes out memory, so memset is not needed dma_alloc_coherent() already zeroes out memory so memset() is not needed. Link: https://lore.kernel.org/r/1596079918-41115-3-git-send-email-liheng40@huawei.comSigned-off-by:
Li Heng <liheng40@huawei.com> Signed-off-by:
-
- 18 Aug, 2020 2 commits
-
-
Saurav Kashyap authored
FCoE adapter initialization failed for ISP8021 with the following patch applied. In addition, reproduction of the issue the patch originally tried to address has been unsuccessful. This reverts commit 3cb182b3. Link: https://lore.kernel.org/r/20200806111014.28434-11-njavali@marvell.comReviewed-by:
-
Enzo Matsumiya authored
Improves readability of qla_mbx.c. Link: https://lore.kernel.org/r/20200805200546.22497-1-ematsumiya@suse.deReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by:
-
- 02 Jul, 2020 2 commits
-
-
Shyam Sundar authored
* Firmware Initialization with SCM enabled based on NVRAM setting and firmware support (About Firmware). * Enable PUREX and add support for fabric performance impact notification (FPIN) handling. * Allocate a default PUREX item for each vha to handle memory allocation failures in ISR. Link: https://lore.kernel.org/r/20200630102229.29660-3-njavali@marvell.comReviewed-by:
James Smart <james.smart@broadcom.com> Signed-off-by:
Shyam Sundar <ssundar@marvell.com> Signed-off-by:
-
Shyam Sundar authored
SAN Congestion Management generates ELS pkts whose size can vary and be > 64 bytes. Change the PUREX handling code to support non-standard ELS pkt size. Link: https://lore.kernel.org/r/20200630102229.29660-2-njavali@marvell.comReviewed-by:
-
- 20 May, 2020 5 commits
-
-
Bart Van Assche authored
Fix all endianness complaints reported by sparse (C=2) without affecting the behavior of the code on little endian CPUs. Link: https://lore.kernel.org/r/20200518211712.11395-16-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Daniel Wagner <dwagner@suse.de> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
Casting a pointer to void * and relying on an implicit cast from void * to uint16_t or uint32_t suppresses sparse warnings about endianness. Hence cast explicitly to uint16_t and uint32_t. Additionally, remove superfluous void * casts. Link: https://lore.kernel.org/r/20200518211712.11395-13-bvanassche@acm.org Cc: Arun Easi <aeasi@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
-
Bart Van Assche authored
This was suggested by Daniel Wagner. Link: https://lore.kernel.org/r/20200518211712.11395-12-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
-
Bart Van Assche authored
Make the MMIO accessors strongly typed such that the compiler checks whether the accessor function is used that matches the register width. Fix those MMIO accesses where another number of bits was read or written than the size of the register. Link: https://lore.kernel.org/r/20200518211712.11395-11-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
-
Bart Van Assche authored
Instead of passing an argument to the firmware dumping functions that tells these functions whether or not to obtain the hardware lock, obtain that lock before calling these functions. This patch fixes the following recently introduced C=2 build error: CHECK drivers/scsi/qla2xxx/qla_tmpl.c drivers/scsi/qla2xxx/qla_tmpl.c:1133:1: error: Expected ; at end of statement drivers/scsi/qla2xxx/qla_tmpl.c:1133:1: error: got } drivers/scsi/qla2xxx/qla_tmpl.h:247:0: error: Expected } at end of function drivers/scsi/qla2xxx/qla_tmpl.h:247:0: error: got end-of-input Link: https://lore.kernel.org/r/20200518211712.11395-4-bvanassche@acm.org Fixes: cbb01c2f ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Cc: Arun Easi <aeasi@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by:
-
- 24 Apr, 2020 1 commit
-
-
Arun Easi authored
In NPIV environment, a NPIV host may use a queue pair created by base host or other NPIVs, so the check for a queue pair created by this NPIV is not correct, and can cause an abort to fail, which in turn means the NVME command not returned. This leads to hang in nvme_fc layer in nvme_fc_delete_association() which waits for all I/Os to be returned, which is seen as hang in the application. Link: https://lore.kernel.org/r/20200331104015.24868-3-njavali@marvell.comReviewed-by:
-
- 13 Apr, 2020 1 commit
-
-
Nilesh Javali authored
drivers/scsi/qla2xxx/qla_dbg.c:2542:7: warning: The scope of the variable 'pbuf' can be reduced. [variableScope] drivers/scsi/qla2xxx/qla_init.c:3615:6: warning: Variable 'rc' is assigned a value that is never used. [unreadVariable] drivers/scsi/qla2xxx/qla_isr.c:81:11-29: WARNING: dma_alloc_coherent use in rsp_els already zeroes out memory, so memset is not needed drivers/scsi/qla2xxx/qla_mbx.c:4889:15-33: WARNING: dma_alloc_coherent use in els_cmd_map already zeroes out memory, so memset is not needed [mkp: added newline after variable declaration] Link: https://lore.kernel.org/r/20200403084018.30766-2-njavali@marvell.comReported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
- 29 Feb, 2020 7 commits
-
-
Quinn Tran authored
When transitioning from loop to N2N, stale NPort ID is not re-assigned. Stale ID can collide with remote device. This patch will re-assign NPort ID on N2N is detected. Link: https://lore.kernel.org/r/20200226224022.24518-18-hmadhani@marvell.comSigned-off-by:
Himanshu Madhani <hmadhani@marvell.com> Signed-off-by:
-
Quinn Tran authored
NPIV re-enable code was blocked after FW had been initialized. The blocking check was too broad. Reduce the check to make sure if FW is initialized or not. Link: https://lore.kernel.org/r/20200226224022.24518-14-hmadhani@marvell.comSigned-off-by:
-
Quinn Tran authored
For single port 28XX adapter, the second core can still run in the background. The flash semaphore can be held by the non-active core. This patch tell MPI FW to check for this case and clear the semaphore from the non-active core. Link: https://lore.kernel.org/r/20200226224022.24518-12-hmadhani@marvell.comSigned-off-by:
-
Andrew Vasquez authored
commit e4e3a2ce ("scsi: qla2xxx: Add ability to autodetect SFP type") takes a heavy handed approach to BPM (Buffer Plus Management) enablement: 1) During hardware initialization, if an LR-capable transceiver is recognized, the driver schedules a disruptive post-initialization chip-reset (ISP-ABORT) to allow the BPM settings to be sent to the firmware. This chip-reset will result in (short-term) path-loss to all fc-rports and their attached SCSI devices. 2) LR-detection is triggered during any link-up event, resulting in a refresh and potential chip-reset Based on firmware-team guidance, upon LR-capable transceiver recognition, the driver's hardware initialization code will now re-execute firmware with the new BPM settings, then continue on with driver initialization. To address the second issue, the driver performs LR-capable detection upon the driver receiving a transceiver-insertion asynchronous event from firmware. No short-term path loss is needed with this new semantic. Link: https://lore.kernel.org/r/20200226224022.24518-10-hmadhani@marvell.comSigned-off-by:
Andrew Vasquez <andrewv@marvell.com> Signed-off-by:
-
Michael Hernandez authored
This patch improved message for Secure Flash support. No functionality has been changed. Link: https://lore.kernel.org/r/20200226224022.24518-6-hmadhani@marvell.comSigned-off-by:
Michael Hernandez <mhernandez@marvell.com> Signed-off-by:
-
Bart Van Assche authored
This patch allows sparse to verify the endianness of the arguments passed to make_handle(). Link: https://lore.kernel.org/r/20200220043441.20504-5-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by:
-
Bart Van Assche authored
This patch fixes the following sparse warnings: drivers/scsi/qla2xxx/qla_mbx.c:120:21: warning: restricted pci_channel_state_t degrades to integer drivers/scsi/qla2xxx/qla_mbx.c:120:37: warning: restricted pci_channel_state_t degrades to integer >From include/linux/pci.h: enum pci_channel_state { /* I/O channel is in normal state */ pci_channel_io_normal = (__force pci_channel_state_t) 1, /* I/O to channel is blocked */ pci_channel_io_frozen = (__force pci_channel_state_t) 2, /* PCI card is dead */ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, }; Link: https://lore.kernel.org/r/20200220043441.20504-4-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by:
-
- 24 Feb, 2020 5 commits
-
-
Himanshu Madhani authored
This patch fixes: - qla2x00_issue_iocb_timeout will now return if chip is down - only check for sp->qpair in abort handling Link: https://lore.kernel.org/r/20200212214436.25532-24-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
Ths patch fixes MBX in-direction for setting right bits for qla2x00_echo_test() Link: https://lore.kernel.org/r/20200212214436.25532-19-hmadhani@marvell.comSigned-off-by:
Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by:
-
Himanshu Madhani authored
During Link up phase and Data rate MBX command response, print message indicating FCE is enabled. Link: https://lore.kernel.org/r/20200212214436.25532-11-hmadhani@marvell.comSigned-off-by:
-
Joe Carnuccio authored
This patch adds RDP command support in the driver. With the help of new ql2xsmartsan parameter, driver will use PUREX IOCB mode to send RDP command to switch and will be able to receive various diagnostic data. Link: https://lore.kernel.org/r/20200212214436.25532-8-hmadhani@marvell.comSigned-off-by:
Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by:
-
Joe Carnuccio authored
This patch prepares code for implementing Vendor specific extended FDMI/RDP commands. It also addes support for MBC_GET_PORT_DATABASE and MBC_GET_RNID_PARAMS commands. Link: https://lore.kernel.org/r/20200212214436.25532-7-hmadhani@marvell.comSigned-off-by:
-
- 21 Feb, 2020 1 commit
-
-
Joe Carnuccio authored
This patch provides an interface to do the following (using MBC 0x3B): - Displays (in hex) the LED config words for all three LEDs. - Programs the config words for one LED or for all three LEDs. The sysfs node defined is named beacon_config. First, to allow driver to gain LED control, do this: # echo 1 > /sys/class/scsi_host/host#/beacon Then, to display config words for all three LEDs do this: # cat /sys/class/scsi_host/host#/beacon_config To set config words for all three LEDs do this: # echo 3 xxxx yyyy zzzz > /sys/class/scsi_host/host#/beacon_config Or, to set config word for a specific single LED n do this: # echo n xxxx > /sys/class/scsi_host/host#/beacon_config where n is the LED number (0, 1, 2) Finally, to restore LED control back to firmware, do this: # echo 0 > /sys/class/scsi_host/host#/beacon Link: https://lore.kernel.org/r/20200212214436.25532-2-hmadhani@marvell.comSigned-off-by:
-
- 21 Dec, 2019 1 commit
-
-
Quinn Tran authored
MTCP dump failed due to MB Reg 10 was picking garbage data from stack memory. Fixes: 81178772 ("[SCSI] qla2xxx: Implemetation of mctp.") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191217220617.28084-14-hmadhani@marvell.comSigned-off-by:
-
- 09 Dec, 2019 1 commit
-
-
Roman Bolshakov authored
PORT UPDATE asynchronous event is generated on the host that issues PLOGI ELS (in the case of higher WWPN). In that case, the event shouldn't be handled as it sets unwanted DPC flags (i.e. LOOP_RESYNC_NEEDED) that trigger link flap. Ignore the event if the host has higher WWPN, but handle otherwise. Cc: Quinn Tran <qutran@marvell.com> Link: https://lore.kernel.org/r/20191125165702.1013-13-r.bolshakov@yadro.comAcked-by:
-
- 09 Nov, 2019 1 commit
-
-
Quinn Tran authored
when GPSC/GPDB switch command fails, driver just returns without doing a proper cleanup. This patch fixes this memory leak by calling sp->free() in the error path. Link: https://lore.kernel.org/r/20191105150657.8092-4-hmadhani@marvell.comReviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
- 23 Oct, 2019 1 commit
-
-
Himanshu Madhani authored
This patch fixes issue with Gen7 adapter in a blade environment where one of the ports will not be detected by driver. Firmware expects mailbox 11 to be set or cleared by driver for newer ISP. Following message is seen in the log file: [ 18.810892] qla2xxx [0000:d8:00.0]-1820:1: **** Failed=102 mb[0]=4005 mb[1]=37 mb[2]=20 mb[3]=8 [ 18.819596] cmd=2 **** [mkp: typos] Link: https://lore.kernel.org/r/20191022193643.7076-2-hmadhani@marvell.comSigned-off-by:
-
- 10 Oct, 2019 1 commit
-
-
Michael Hernandez authored
Some storage arrays advertise FCP LUNs and NVMe namespaces behind the same WWN. The driver now offers a user option by way of NVRAM parameter to allow users to choose, on a per port basis, the kind of FC-4 type they would like to prioritize for login. Link: https://lore.kernel.org/r/20190912180918.6436-9-hmadhani@marvell.comSigned-off-by:
-
- 24 Sep, 2019 1 commit
-
-
Quinn Tran authored
During link up/bounce, qla driver would do command flush as part of cleanup. In this case, the flush can intefere with FW state. This patch allows FW to be in control of link up. Link: https://lore.kernel.org/r/20190912180918.6436-7-hmadhani@marvell.comSigned-off-by:
-
