- 29 Nov, 2021 7 commits
-
-
Tom Parkin authored
Previously commit e02d494d ("l2tp: Convert rwlock to RCU") converted most, but not all, rwlock instances in the l2tp subsystem to RCU. The remaining rwlock protects the per-tunnel hashlist of sessions which is used for session lookups in the UDP-encap data path. Convert the remaining rwlock to rcu to improve performance of UDP-encap tunnels. Note that the tunnel and session, which both live on RCU-protected lists, use slightly different approaches to incrementing their refcounts in the various getter functions. The tunnel has to use refcount_inc_not_zero because the tunnel shutdown process involves dropping the refcount to zero prior to synchronizing RCU readers (via. kfree_rcu). By contrast, the session shutdown removes the session from the list(s) it is on, synchronizes with readers, and then decrements the session refcount. Since the getter functions increment the session refcount with the RCU read lock held we prevent getters seeing a zero session refcount, and therefore don't need to use refcount_inc_not_zero. Signed-off-by:
Tom Parkin <tparkin@katalix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Maxime Chevallier says: ==================== net: mvneta: mqprio cleanups and shaping support This is the second version of the series that adds some improvements to the existing mqprio implementation in mvneta, and adds support for egress shaping offload. The first 3 patches are some minor cleanups, such as using the tc_mqprio_qopt_offload structure to get access to more offloading options, cleaning the logic to detect whether or not we should offload mqprio setting, and allowing to have a 1 to N mapping between TCs and queues. The last patch adds traffic shaping offload, using mvneta's per-queue token buckets, allowing to limit rates from 10Kbps up to 5Gbps with 10Kbps increments. This was tested only on an Armada 3720, with traffic up to 2.5Gbps. Changes since V1 fixes the build for 32bits kernels, using the right div helpers as suggested by Jakub. ==================== Signed-off-by: -
Maxime Chevallier authored
The mvneta controller is able to do some tocken-bucket per-queue traffic shaping. This commit adds support for setting these using the TC mqprio interface. The token-bucket parameters are customisable, but the current implementation configures them to have a 10kbps resolution for the rate limitation, since it allows to cover the whole range of max_rate values from 10kbps to 5Gbps with 10kbps increments. Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Maxime Chevallier authored
The current mqprio implementation assumed that we are only using one queue per TC. Use the offset and count parameters to allow using multiple queues per TC. In that case, the controller will use a standard round-robin algorithm to pick queues assigned to the same TC, with the same priority. This only applies to VLAN priorities in ingress traffic, each TC corresponding to a vlan priority. Signed-off-by:
-
Maxime Chevallier authored
The qopt->hw flag is set by the TC code according to the offloading mode asked by user. Don't force-set it in the driver, but instead read it to make sure we do what's asked. Signed-off-by:
-
Maxime Chevallier authored
The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt, that allows passing extra parameters, such as traffic shaping. This commit converts the current mqprio code to that new struct. Signed-off-by:
-
Yang Yingliang authored
Use devm_ioremap() instead of ioremap() to avoid iounmap() missing. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
- 27 Nov, 2021 27 commits
-
-
Jakub Kicinski authored
Kuniyuki Iwashima says: ==================== af_unix: Replace unix_table_lock with per-hash locks. The hash table of AF_UNIX sockets is protected by a single big lock, unix_table_lock. This series replaces it with small per-hash locks. 1st - 2nd : Misc refactoring 3rd - 8th : Separate BSD/abstract address logics 9th - 11th : Prep to save a hash in each socket 12th : Replace the big lock 13th : Speed up autobind() Note to maintainers: The 12th patch adds two kinds of Sparse warnings on patchwork: about unix_table_double_lock/unlock() We can avoid this by adding two apparent acquires/releases annotations, but there are the same kinds of warnings about unix_state_double_lock(). about unix_next_socket() and unix_seq_stop() (/proc/net/unix) This is because Sparse does not understand logic in unix_next_socket(), which leaves a spin lock held until it returns NULL. Also, tcp_seq_stop() causes a warning for the same reason. These warnings seem reasonable, but let me know if there is any better way. Please see [0] for details. [0]: https://lore.kernel.org/netdev/20211117001611.74123-1-kuniyu@amazon.co.jp/ ==================== Link: https://lore.kernel.org/r/20211124021431.48956-1-kuniyu@amazon.co.jpSigned-off-by:Jakub Kicinski <kuba@kernel.org>
-
Kuniyuki Iwashima authored
When we bind an AF_UNIX socket without a name specified, the kernel selects an available one from 0x00000 to 0xFFFFF. unix_autobind() starts searching from a number in the 'static' variable and increments it after acquiring two locks. If multiple processes try autobind, they obtain the same lock and check if a socket in the hash list has the same name. If not, one process uses it, and all except one end up retrying the _next_ number (actually not, it may be incremented by the other processes). The more we autobind sockets in parallel, the longer the latency gets. We can avoid such a race by searching for a name from a random number. These show latency in unix_autobind() while 64 CPUs are simultaneously autobind-ing 1024 sockets for each. Without this patch: usec : count distribution 0 : 1176 |*** | 2 : 3655 |*********** | 4 : 4094 |************* | 6 : 3831 |************ | 8 : 3829 |************ | 10 : 3844 |************ | 12 : 3638 |*********** | 14 : 2992 |********* | 16 : 2485 |******* | 18 : 2230 |******* | 20 : 2095 |****** | 22 : 1853 |***** | 24 : 1827 |***** | 26 : 1677 |***** | 28 : 1473 |**** | 30 : 1573 |***** | 32 : 1417 |**** | 34 : 1385 |**** | 36 : 1345 |**** | 38 : 1344 |**** | 40 : 1200 |*** | With this patch: usec : count distribution 0 : 1855 |****** | 2 : 6464 |********************* | 4 : 9936 |******************************** | 6 : 12107 |****************************************| 8 : 10441 |********************************** | 10 : 7264 |*********************** | 12 : 4254 |************** | 14 : 2538 |******** | 16 : 1596 |***** | 18 : 1088 |*** | 20 : 800 |** | 22 : 670 |** | 24 : 601 |* | 26 : 562 |* | 28 : 525 |* | 30 : 446 |* | 32 : 378 |* | 34 : 337 |* | 36 : 317 |* | 38 : 314 |* | 40 : 298 | | Signed-off-by:Kuniyuki Iwashima <kuniyu@amazon.co.jp> Signed-off-by:
-
Kuniyuki Iwashima authored
The hash table of AF_UNIX sockets is protected by the single lock. This patch replaces it with per-hash locks. The effect is noticeable when we handle multiple sockets simultaneously. Here is a test result on an EC2 c5.24xlarge instance. It shows latency (under 10us only) in unix_insert_unbound_socket() while 64 CPUs creating 1024 sockets for each in parallel. Without this patch: nsec : count distribution 0 : 179 | | 500 : 3021 |********* | 1000 : 6271 |******************* | 1500 : 6318 |******************* | 2000 : 5828 |***************** | 2500 : 5124 |*************** | 3000 : 4426 |************* | 3500 : 3672 |*********** | 4000 : 3138 |********* | 4500 : 2811 |******** | 5000 : 2384 |******* | 5500 : 2023 |****** | 6000 : 1954 |***** | 6500 : 1737 |***** | 7000 : 1749 |***** | 7500 : 1520 |**** | 8000 : 1469 |**** | 8500 : 1394 |**** | 9000 : 1232 |*** | 9500 : 1138 |*** | 10000 : 994 |*** | With this patch: nsec : count distribution 0 : 1634 |**** | 500 : 13170 |****************************************| 1000 : 13156 |*************************************** | 1500 : 9010 |*************************** | 2000 : 6363 |******************* | 2500 : 4443 |************* | 3000 : 3240 |********* | 3500 : 2549 |******* | 4000 : 1872 |***** | 4500 : 1504 |**** | 5000 : 1247 |*** | 5500 : 1035 |*** | 6000 : 889 |** | 6500 : 744 |** | 7000 : 634 |* | 7500 : 498 |* | 8000 : 433 |* | 8500 : 355 |* | 9000 : 336 |* | 9500 : 284 | | 10000 : 243 | | Signed-off-by: -
Kuniyuki Iwashima authored
To replace unix_table_lock with per-hash locks in the next patch, we need to save a hash in each socket because /proc/net/unix or BPF prog iterate sockets while holding a hash table lock and release it later in a different function. Currently, we store a real/pseudo hash in struct unix_address. However, we do not allocate it to unbound sockets, nor should we do just for that. For this purpose, we can use sk_hash. Then, we no longer use the hash field in struct unix_address and can remove it. Also, this patch does - rename unix_insert_socket() to unix_insert_unbound_socket() - remove the redundant list argument from __unix_insert_socket() and unix_insert_unbound_socket() - use 'unsigned int' instead of 'unsigned' in __unix_set_addr_hash() - remove 'inline' from unix_remove_socket() and unix_insert_unbound_socket(). Signed-off-by: -
Kuniyuki Iwashima authored
This patch adds three helper functions that calculate hashes for unbound sockets and bound sockets with BSD/abstract addresses. Signed-off-by:
-
Kuniyuki Iwashima authored
In BSD and abstract address cases, we store sockets in the hash table with keys between 0 and UNIX_HASH_SIZE - 1. However, the hash saved in a socket varies depending on its address type; sockets with BSD addresses always have UNIX_HASH_SIZE in their unix_sk(sk)->addr->hash. This is just for the UNIX_ABSTRACT() macro used to check the address type. The difference of the saved hashes comes from the first byte of the address in the first place. So, we can test it directly. Then we can keep a real hash in each socket and replace unix_table_lock with per-hash locks in the later patch. Signed-off-by:
-
Kuniyuki Iwashima authored
To terminate address with '\0' in unix_bind_bsd(), we add unix_create_addr() and call it in unix_bind_bsd() and unix_bind_abstract(). Also, unix_bind_abstract() does not return -EEXIST. Only kern_path_create() and vfs_mknod() in unix_bind_bsd() can return it, so we move the last error check in unix_bind() to unix_bind_bsd(). Signed-off-by:
-
Kuniyuki Iwashima authored
This patch removes unix_mkname() and postpones calculating a hash to unix_bind_abstract(). Some BSD stuffs still remain in unix_bind() though, the next patch packs them into unix_bind_bsd(). Signed-off-by:
-
Kuniyuki Iwashima authored
We should not call unix_mkname() before unix_find_other() and instead do the same thing where necessary based on the address type: - terminating the address with '\0' in unix_find_bsd() - calculating the hash in unix_find_abstract(). Signed-off-by:
-
Kuniyuki Iwashima authored
unix_mkname() tests socket address length and family and does some processing based on the address type. It is called in the early stage, and therefore some instructions are redundant and can end up in vain. The address length/family tests are done twice in unix_bind(). Also, the address type is rechecked later in unix_bind() and unix_find_other(), where we can do the same processing. Moreover, in the BSD address case, the hash is set to 0 but never used and confusing. This patch moves the address tests out of unix_mkname(), and the following patches move the other part into appropriate places and remove unix_mkname() finally. Signed-off-by:
-
Kuniyuki Iwashima authored
We can return an error as a pointer and need not pass an additional argument to unix_find_other(). Signed-off-by:
-
Kuniyuki Iwashima authored
As done in the commit fa42d910 ("unix_bind(): take BSD and abstract address cases into new helpers"), this patch moves BSD and abstract address cases from unix_find_other() into unix_find_bsd() and unix_find_abstract(). Signed-off-by:
-
Kuniyuki Iwashima authored
We do not use struct socket in unix_autobind() and pass struct sock to unix_bind_bsd() and unix_bind_abstract(). Let's pass it to unix_autobind() as well. Also, this patch fixes these errors by checkpatch.pl. ERROR: do not use assignment in if condition #1795: FILE: net/unix/af_unix.c:1795: + if (test_bit(SOCK_PASSCRED, &sock->flags) && !u->addr CHECK: Logical continuations should be on the previous line #1796: FILE: net/unix/af_unix.c:1796: + if (test_bit(SOCK_PASSCRED, &sock->flags) && !u->addr + && (err = unix_autobind(sock)) != 0) Signed-off-by:
-
Kuniyuki Iwashima authored
The length of the AF_UNIX socket address contains an offset to the member sun_path of struct sockaddr_un. Currently, the preceding member is just sun_family, and its type is sa_family_t and resolved to short. Therefore, the offset is represented by sizeof(short). However, it is not clear and fragile to changes in struct sockaddr_storage or sockaddr_un. This commit makes it clear and robust by rewriting sizeof() with offsetof(). Signed-off-by:
-
Xin Long authored
The same optimization as the one in commit cc0be1ad ("net: bridge: Slightly optimize 'find_portno()'") is needed for the 'changed' bitmap in __br_vlan_set_default_pvid(). Signed-off-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/4e35f415226765e79c2a11d2c96fbf3061c486e2.1637782773.git.lucien.xin@gmail.comSigned-off-by:
-
Tonghao Zhang authored
The netdev (e.g. ifb, bareudp), which not support ethtool ops (e.g. .get_drvinfo), we can use the rtnl kind as a default name. ifb netdev may be created by others prefix, not ifbX. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Hao Chen <chenhao288@hisilicon.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Danielle Ratson <danieller@nvidia.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20211125163049.84970-1-xiangxia.m.yue@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Nikolay Aleksandrov says: ==================== selftests: net: bridge: vlan multicast tests This patch-set adds selftests for the new vlan multicast options that were recently added. Most of the tests check for default values, changing options and try to verify that the changes actually take effect. The last test checks if the dependency between vlan_filtering and mcast_vlan_snooping holds. The rest are pretty self-explanatory. TEST: Vlan multicast snooping enable [ OK ] TEST: Vlan global options existence [ OK ] TEST: Vlan mcast_snooping global option default value [ OK ] TEST: Vlan 10 multicast snooping control [ OK ] TEST: Vlan mcast_querier global option default value [ OK ] TEST: Vlan 10 multicast querier enable [ OK ] TEST: Vlan 10 tagged IGMPv2 general query sent [ OK ] TEST: Vlan 10 tagged MLD general query sent [ OK ] TEST: Vlan mcast_igmp_version global option default value [ OK ] TEST: Vlan mcast_mld_version global option default value [ OK ] TEST: Vlan 10 mcast_igmp_version option changed to 3 [ OK ] TEST: Vlan 10 tagged IGMPv3 general query sent [ OK ] TEST: Vlan 10 mcast_mld_version option changed to 2 [ OK ] TEST: Vlan 10 tagged MLDv2 general query sent [ OK ] TEST: Vlan mcast_last_member_count global option default value [ OK ] TEST: Vlan mcast_last_member_interval global option default value [ OK ] TEST: Vlan 10 mcast_last_member_count option changed to 3 [ OK ] TEST: Vlan 10 mcast_last_member_interval option changed to 200 [ OK ] TEST: Vlan mcast_startup_query_interval global option default value [ OK ] TEST: Vlan mcast_startup_query_count global option default value [ OK ] TEST: Vlan 10 mcast_startup_query_interval option changed to 100 [ OK ] TEST: Vlan 10 mcast_startup_query_count option changed to 3 [ OK ] TEST: Vlan mcast_membership_interval global option default value [ OK ] TEST: Vlan 10 mcast_membership_interval option changed to 200 [ OK ] TEST: Vlan 10 mcast_membership_interval mdb entry expire [ OK ] TEST: Vlan mcast_querier_interval global option default value [ OK ] TEST: Vlan 10 mcast_querier_interval option changed to 100 [ OK ] TEST: Vlan 10 mcast_querier_interval expire after outside query [ OK ] TEST: Vlan mcast_query_interval global option default value [ OK ] TEST: Vlan 10 mcast_query_interval option changed to 200 [ OK ] TEST: Vlan mcast_query_response_interval global option default value [ OK ] TEST: Vlan 10 mcast_query_response_interval option changed to 200 [ OK ] TEST: Port vlan 10 option mcast_router default value [ OK ] TEST: Port vlan 10 mcast_router option changed to 2 [ OK ] TEST: Flood unknown vlan multicast packets to router port only [ OK ] TEST: Disable multicast vlan snooping when vlan filtering is disabled [ OK ] ==================== Link: https://lore.kernel.org/r/20211125140858.3639139-1-razor@blackwall.orgSigned-off-by:
-
Nikolay Aleksandrov authored
Add a test for dependency of mcast_vlan_snooping on vlan_filtering. If vlan_filtering gets disabled, then mcast_vlan_snooping must be automatically disabled as well. TEST: Disable multicast vlan snooping when vlan filtering is disabled [ OK ] Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Add tests for the new per-port/vlan mcast_router option, verify that unknown multicast packets are flooded only to router ports. TEST: Port vlan 10 option mcast_router default value [ OK ] TEST: Port vlan 10 mcast_router option changed to 2 [ OK ] TEST: Flood unknown vlan multicast packets to router port only [ OK ] Signed-off-by:
-
Nikolay Aleksandrov authored
Add tests which change the new per-vlan mcast_query_interval and verify the new value is in effect, also add a test to change mcast_query_response_interval's value. TEST: Vlan mcast_query_interval global option default value [ OK ] TEST: Vlan 10 mcast_query_interval option changed to 200 [ OK ] TEST: Vlan mcast_query_response_interval global option default value [ OK ] TEST: Vlan 10 mcast_query_response_interval option changed to 200 [ OK ] Signed-off-by:
-
Nikolay Aleksandrov authored
Add tests which change the new per-vlan mcast_querier_interval and verify that it is taken into account when an outside querier is present. TEST: Vlan mcast_querier_interval global option default value [ OK ] TEST: Vlan 10 mcast_querier_interval option changed to 100 [ OK ] TEST: Vlan 10 mcast_querier_interval expire after outside query [ OK ] Signed-off-by:
-
Nikolay Aleksandrov authored
Add a test which changes the new per-vlan mcast_membership_interval and verifies that a newly learned mdb entry would expire in that interval. TEST: Vlan mcast_membership_interval global option default value [ OK ] TEST: Vlan 10 mcast_membership_interval option changed to 200 [ OK ] TEST: Vlan 10 mcast_membership_interval mdb entry expire [ OK ] Signed-off-by:
-
Nikolay Aleksandrov authored
Add tests which change the new per-vlan startup query count/interval options and verify the proper number of queries are sent in the expected interval. TEST: Vlan mcast_startup_query_interval global option default value [ OK ] TEST: Vlan mcast_startup_query_count global option default value [ OK ] TEST: Vlan 10 mcast_startup_query_interval option changed to 100 [ OK ] TEST: Vlan 10 mcast_startup_query_count option changed to 3 [ OK ] Signed-off-by:
-
Nikolay Aleksandrov authored
Add tests which verify the default values of mcast_last_member_count mcast_last_member_count and also try to change them. TEST: Vlan mcast_last_member_count global option default value [ OK ] TEST: Vlan mcast_last_member_interval global option default value [ OK ] TEST: Vlan 10 mcast_last_member_count option changed to 3 [ OK ] TEST: Vlan 10 mcast_last_member_interval option changed to 200 [ OK ] Signed-off-by:
-
Nikolay Aleksandrov authored
Add tests which change the new per-vlan IGMP/MLD versions and verify that proper tagged general query packets are sent. TEST: Vlan mcast_igmp_version global option default value [ OK ] TEST: Vlan mcast_mld_version global option default value [ OK ] TEST: Vlan 10 mcast_igmp_version option changed to 3 [ OK ] TEST: Vlan 10 tagged IGMPv3 general query sent [ OK ] TEST: Vlan 10 mcast_mld_version option changed to 2 [ OK ] TEST: Vlan 10 tagged MLDv2 general query sent [ OK ] Signed-off-by:
-
Nikolay Aleksandrov authored
Add a test to try the new global vlan mcast_querier control and also verify that tagged general query packets are properly generated when querier is enabled for a single vlan. TEST: Vlan mcast_querier global option default value [ OK ] TEST: Vlan 10 multicast querier enable [ OK ] TEST: Vlan 10 tagged IGMPv2 general query sent [ OK ] TEST: Vlan 10 tagged MLD general query sent [ OK ] Signed-off-by:
-
Nikolay Aleksandrov authored
Add the first test for bridge per-vlan multicast snooping which checks if control of the global and per-vlan options work as expected, joins and leaves are tested at each option value. TEST: Vlan multicast snooping enable [ OK ] TEST: Vlan global options existence [ OK ] TEST: Vlan mcast_snooping global option default value [ OK ] TEST: Vlan 10 multicast snooping control [ OK ] Signed-off-by:
-
- 26 Nov, 2021 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
drivers/net/ipa/ipa_main.c 8afc7e47 ("net: ipa: separate disabling setup from modem stop") 76b5fbcd ("net: ipa: kill ipa_modem_init()") Duplicated include, drop one. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from netfilter. Current release - regressions: - r8169: fix incorrect mac address assignment - vlan: fix underflow for the real_dev refcnt when vlan creation fails - smc: avoid warning of possible recursive locking Current release - new code bugs: - vsock/virtio: suppress used length validation - neigh: fix crash in v6 module initialization error path Previous releases - regressions: - af_unix: fix change in behavior in read after shutdown - igb: fix netpoll exit with traffic, avoid warning - tls: fix splice_read() when starting mid-record - lan743x: fix deadlock in lan743x_phy_link_status_change() - marvell: prestera: fix bridge port operation Previous releases - always broken: - tcp_cubic: fix spurious Hystart ACK train detections for not-cwnd-limited flows - nexthop: fix refcount issues when replacing IPv6 groups - nexthop: fix null pointer dereference when IPv6 is not enabled - phylink: force link down and retrigger resolve on interface change - mptcp: fix delack timer length calculation and incorrect early clearing - ieee802154: handle iftypes as u32, prevent shift-out-of-bounds - nfc: virtual_ncidev: change default device permissions - netfilter: ctnetlink: fix error codes and flags used for kernel side filtering of dumps - netfilter: flowtable: fix IPv6 tunnel addr match - ncsi: align payload to 32-bit to fix dropped packets - iavf: fix deadlock and loss of config during VF interface reset - ice: avoid bpf_prog refcount underflow - ocelot: fix broken PTP over IP and PTP API violations Misc: - marvell: mvpp2: increase MTU limit when XDP enabled" * tag 'net-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits) net: dsa: microchip: implement multi-bridge support net: mscc: ocelot: correctly report the timestamping RX filters in ethtool net: mscc: ocelot: set up traps for PTP packets net: ptp: add a definition for the UDP port for IEEE 1588 general messages net: mscc: ocelot: create a function that replaces an existing VCAP filter net: mscc: ocelot: don't downgrade timestamping RX filters in SIOCSHWTSTAMP net: hns3: fix incorrect components info of ethtool --reset command net: hns3: fix one incorrect value of page pool info when queried by debugfs net: hns3: add check NULL address for page pool net: hns3: fix VF RSS failed problem after PF enable multi-TCs net: qed: fix the array may be out of bound net/smc: Don't call clcsock shutdown twice when smc shutdown net: vlan: fix underflow for the real_dev refcnt ptp: fix filter names in the documentation ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce() nfc: virtual_ncidev: change default device permissions net/sched: sch_ets: don't peek at classes beyond 'nbands' net: stmmac: Disable Tx queues when reconfiguring the interface selftests: tls: test for correct proto_ops tls: fix replacing proto_ops ... -
Oleksij Rempel authored
Current driver version is able to handle only one bridge at time. Configuring two bridges on two different ports would end up shorting this bridges by HW. To reproduce it: ip l a name br0 type bridge ip l a name br1 type bridge ip l s dev br0 up ip l s dev br1 up ip l s lan1 master br0 ip l s dev lan1 up ip l s lan2 master br1 ip l s dev lan2 up Ping on lan1 and get response on lan2, which should not happen. This happened, because current driver version is storing one global "Port VLAN Membership" and applying it to all ports which are members of any bridge. To solve this issue, we need to handle each port separately. This patch is dropping the global port member storage and calculating membership dynamically depending on STP state and bridge participation. Note: STP support was broken before this patch and should be fixed separately. Fixes: c2e86691 ("net: dsa: microchip: break KSZ9477 DSA driver into two files") Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20211126123926.2981028-1-o.rempel@pengutronix.deSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These fix a NULL pointer dereference in the CPPC library code and a locking issue related to printing the names of ACPI device nodes in the device properties framework. Specifics: - Fix NULL pointer dereference in the CPPC library code occuring on hybrid systems without CPPC support (Rafael Wysocki). - Avoid attempts to acquire a semaphore with interrupts off when printing the names of ACPI device nodes and clean up code on top of that fix (Sakari Ailus)" * tag 'acpi-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: CPPC: Add NULL pointer check to cppc_get_perf() ACPI: Make acpi_node_get_parent() local ACPI: Get acpi_device's parent from the parent field -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "These address three issues in the intel_pstate driver and fix two problems related to hibernation. Specifics: - Make intel_pstate work correctly on Ice Lake server systems with out-of-band performance control enabled (Adamos Ttofari). - Fix EPP handling in intel_pstate during CPU offline and online in the active mode (Rafael Wysocki). - Make intel_pstate support ITMT on asymmetric systems with overclocking enabled (Srinivas Pandruvada). - Fix hibernation image saving when using the user space interface based on the snapshot special device file (Evan Green). - Make the hibernation code release the snapshot block device using the same mode that was used when acquiring it (Thomas Zeitlhofer)" * tag 'pm-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: hibernate: Fix snapshot partial write lengths PM: hibernate: use correct mode for swsusp_close() cpufreq: intel_pstate: ITMT support for overclocked system cpufreq: intel_pstate: Fix active mode offline/online EPP handling cpufreq: intel_pstate: Add Ice Lake server to out-of-band IDs -
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse fix from Miklos Szeredi: "Fix a regression caused by a bugfix in the previous release. The symptom is a VM_BUG_ON triggered from splice to the fuse device. Unfortunately the original bugfix was already backported to a number of stable releases, so this fix-fix will need to be backported as well" * tag 'fuse-fixes-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: release pipe buf after last use
-
