- 13 Jan, 2021 2 commits
-
-
Vladimir Oltean authored
Currently the following happens when a DSA master driver unbinds while there are DSA switches attached to it: $ echo 0000:00:00.5 > /sys/bus/pci/drivers/mscc_felix/unbind ------------[ cut here ]------------ WARNING: CPU: 0 PID: 392 at net/core/dev.c:9507 Call trace: rollback_registered_many+0x5fc/0x688 unregister_netdevice_queue+0x98/0x120 dsa_slave_destroy+0x4c/0x88 dsa_port_teardown.part.16+0x78/0xb0 dsa_tree_teardown_switches+0x58/0xc0 dsa_unregister_switch+0x104/0x1b8 felix_pci_remove+0x24/0x48 pci_device_remove+0x48/0xf0 device_release_driver_internal+0x118/0x1e8 device_driver_detach+0x28/0x38 unbind_store+0xd0/0x100 Located at the above location is this WARN_ON: /* Notifier chain MUST detach us all upper devices. */ WARN_ON(netdev_has_any_upper_dev(dev)); Other stacked interfaces, like VLAN, do indeed listen for NETDEV_UNREGISTER on the real_dev and also unregister themselves at that time, which is clearly the behavior that rollback_registered_many expects. But DSA interfaces are not VLAN. They have backing hardware (platform devices, PCI devices, MDIO, SPI etc) which have a life cycle of their own and we can't just trigger an unregister from the DSA framework when we receive a netdev notifier that the master unregisters. Luckily, there is something we can do, and that is to inform the driver core that we have a runtime dependency to the DSA master interface's device, and create a device link where that is the supplier and we are the consumer. Having this device link will make the DSA switch unbind before the DSA master unbinds, which is enough to avoid the WARN_ON from rollback_registered_many. Note that even before the blamed commit, DSA did nothing intelligent when the master interface got unregistered either. See the discussion here: https://lore.kernel.org/netdev/20200505210253.20311-1-f.fainelli@gmail.com/ But this time, at least the WARN_ON is loud enough that the upper_dev_link commit can be blamed. The advantage with this approach vs dev_hold(master) in the attached link is that the latter is not meant for long term reference counting. With dev_hold, the only thing that will happen is that when the user attempts an unbind of the DSA master, netdev_wait_allrefs will keep waiting and waiting, due to DSA keeping the refcount forever. DSA would not access freed memory corresponding to the master interface, but the unbind would still result in a freeze. Whereas with device links, graceful teardown is ensured. It even works with cascaded DSA trees. $ echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind [ 1818.797546] device swp0 left promiscuous mode [ 1819.301112] sja1105 spi2.0: Link is Down [ 1819.307981] DSA: tree 1 torn down [ 1819.312408] device eno2 left promiscuous mode [ 1819.656803] mscc_felix 0000:00:00.5: Link is Down [ 1819.667194] DSA: tree 0 torn down [ 1819.711557] fsl_enetc 0000:00:00.2 eno2: Link is Down This approach allows us to keep the DSA framework absolutely unchanged, and the driver core will just know to unbind us first when the master goes away - as opposed to the large (and probably impossible) rework required if attempting to listen for NETDEV_UNREGISTER. As per the documentation at Documentation/driver-api/device_link.rst, specifying the DL_FLAG_AUTOREMOVE_CONSUMER flag causes the device link to be automatically purged when the consumer fails to probe or later unbinds. So we don't need to keep the consumer_link variable in struct dsa_switch. Fixes: 2f1e8ea7 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Jakub Kicinski <kuba@kernel.org>
-
Marco Felsch authored
Commit bedd8d78 ("net: phy: smsc: LAN8710/20: add phy refclk in support") added the phy clk support. The commit already checks if clk_get_optional() throw an error but instead of returning the error it ignores it. Fixes: bedd8d78 ("net: phy: smsc: LAN8710/20: add phy refclk in support") Suggested-by:
Marco Felsch <m.felsch@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20210111085932.28680-1-m.felsch@pengutronix.deSigned-off-by:
-
- 12 Jan, 2021 7 commits
-
-
Petr Machata authored
In commit 826f328e ("net: dcb: Validate netlink message in DCB handler"), Linux started rejecting RTM_GETDCB netlink messages if they contained a set-like DCB_CMD_ command. The reason was that privileges were only verified for RTM_SETDCB messages, but the value that determined the action to be taken is the command, not the message type. And validation of message type against the DCB command was the obvious missing piece. Unfortunately it turns out that mlnx_qos, a somewhat widely deployed tool for configuration of DCB, accesses the DCB set-like APIs through RTM_GETDCB. Therefore do not bounce the discrepancy between message type and command. Instead, in addition to validating privileges based on the actual message type, validate them also based on the expected message type. This closes the loophole of allowing DCB configuration on non-admin accounts, while maintaining backward compatibility. Fixes: 2f90b865 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver") Fixes: 826f328e ("net: dcb: Validate netlink message in DCB handler") Signed-off-by:
Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/a3edcfda0825f2aa2591801c5232f2bbf2d8a554.1610384801.git.me@pmachata.orgSigned-off-by:
-
Jakub Kicinski authored
Willem de Bruijn says: ==================== skb frag: kmap_atomic fixes skb frags may be backed by highmem and/or compound pages. Various code calls kmap_atomic to safely access highmem pages. But this needs additional care for compound pages. Fix a few issues: patch 1 expect kmap mappings with CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP patch 2 fixes kmap_atomic + compound page support in skb_seq_read patch 3 fixes kmap_atomic + compound page support in esp ==================== Link: https://lore.kernel.org/r/20210109221834.3459768-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
Willem de Bruijn authored
esp(6)_output_head uses skb_page_frag_refill to allocate a buffer for the esp trailer. It accesses the page with kmap_atomic to handle highmem. But skb_page_frag_refill can return compound pages, of which kmap_atomic only maps the first underlying page. skb_page_frag_refill does not return highmem, because flag __GFP_HIGHMEM is not set. ESP uses it in the same manner as TCP. That also does not call kmap_atomic, but directly uses page_address, in skb_copy_to_page_nocache. Do the same for ESP. This issue has become easier to trigger with recent kmap local debugging feature CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP. Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Willem de Bruijn authored
skb_seq_read iterates over an skb, returning pointer and length of the next data range with each call. It relies on kmap_atomic to access highmem pages when needed. An skb frag may be backed by a compound page, but kmap_atomic maps only a single page. There are not enough kmap slots to always map all pages concurrently. Instead, if kmap_atomic is needed, iterate over each page. As this increases the number of calls, avoid this unless needed. The necessary condition is captured in skb_frag_must_loop. I tried to make the change as obvious as possible. It should be easy to verify that nothing changes if skb_frag_must_loop returns false. Tested: On an x86 platform with CONFIG_HIGHMEM=y CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP=y CONFIG_NETFILTER_XT_MATCH_STRING=y Run ip link set dev lo mtu 1500 iptables -A OUTPUT -m string --string 'badstring' -algo bm -j ACCEPT dd if=/dev/urandom of=in bs=1M count=20 nc -l -p 8000 > /dev/null & nc -w 1 -q 0 localhost 8000 < in Signed-off-by: -
Willem de Bruijn authored
Skb frags may be backed by highmem and/or compound pages. Highmem pages need kmap_atomic mappings to access. But kmap_atomic maps a single page, not the entire compound page. skb_foreach_page iterates over an skb frag, in one step in the common case, page by page only if kmap_atomic must be called for each page. The decision logic is captured in skb_frag_must_loop. CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP extends kmap from highmem to all pages, to increase code coverage. Extend skb_frag_must_loop to this new condition. Link: https://lore.kernel.org/linux-mm/20210106180132.41dc249d@gandalf.local.home/ Fixes: 0e91a0c6 ("mm/highmem: Provide CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP") Reported-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Andrey Zhizhikin authored
MSFT ActiveSync implementation requires that the size of the response for incoming query is to be provided in the request input length. Failure to set the input size proper results in failed request transfer, where the ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L) error. Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size of the response in order for the ActiveSync to properly respond to the request. Fixes: 039ee17d ("rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()") Signed-off-by:
Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com> Link: https://lore.kernel.org/r/20210108095839.3335-1-andrey.zhizhikin@leica-geosystems.comSigned-off-by:
-
Stefan Chulski authored
Packet Processor hardware not connected to MAC flow control unit and cannot support TX flow control. This patch disable flow control support. Fixes: 3f518509 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by:
Stefan Chulski <stefanc@marvell.com> Acked-by:
Marcin Wojtas <mw@semihalf.com> Link: https://lore.kernel.org/r/1610306582-16641-1-git-send-email-stefanc@marvell.comSigned-off-by:
-
- 11 Jan, 2021 1 commit
-
-
Seb Laveze authored
The priority field is not the queue priority (queue priority is fixed) but a bitmask of priorities assigned to this queue. In receive, priorities relate to tagged frames priorities. In transmit, priorities relate to PFC frames. Signed-off-by:
Seb Laveze <sebastien.laveze@nxp.com> Link: https://lore.kernel.org/r/20210111081406.1348622-1-sebastien.laveze@oss.nxp.comSigned-off-by:
-
- 10 Jan, 2021 4 commits
-
-
Geert Uytterhoeven authored
The merge resolution of the interaction of commits 307eea32 ("dt-bindings: net: renesas,ravb: Add support for r8a774e1 SoC") and d7adf633 ("dt-bindings: net: renesas,etheravb: Convert to json-schema") missed that "tx-internal-delay-ps" should be a required property on RZ/G2H. Fixes: 8b0308fe ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210105151516.1540653-1-geert+renesas@glider.beSigned-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: core: Thermal control fixes This series includes two fixes for thermal control in mlxsw. Patch #1 validates that the alarm temperature threshold read from a transceiver is above the warning temperature threshold. If not, the current thresholds are maintained. It was observed that some transceiver might be unreliable and sometimes report a too low alarm temperature threshold which would result in thermal shutdown of the system. Patch #2 increases the temperature threshold above which thermal shutdown is triggered for the ASIC thermal zone. It is currently too low and might result in thermal shutdown under perfectly fine operational conditions. ==================== Link: https://lore.kernel.org/r/20210108145210.1229820-1-idosch@idosch.orgSigned-off-by:
-
Vadim Pasternak authored
Increase critical threshold for ASIC thermal zone from 110C to 140C according to the system hardware requirements. All the supported ASICs (Spectrum-1, Spectrum-2, Spectrum-3) could be still operational with ASIC temperature below 140C. With the old critical threshold value system can perform unjustified shutdown. All the systems equipped with the above ASICs implement thermal protection mechanism at firmware level and firmware could decide to perform system thermal shutdown in case the temperature is below 140C. So with the new threshold system will not meltdown, while thermal operating range will be aligned with hardware abilities. Fixes: 41e76084 ("mlxsw: core: Replace thermal temperature trips with defines") Fixes: a50c1e35 ("mlxsw: core: Implement thermal zone") Signed-off-by:
Vadim Pasternak <vadimp@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Vadim Pasternak authored
Validate thresholds to avoid a single failure due to some transceiver unreliability. Ignore the last readouts in case warning temperature is above alarm temperature, since it can cause unexpected thermal shutdown. Stay with the previous values and refresh threshold within the next iteration. This is a rare scenario, but it was observed at a customer site. Fixes: 6a79507c ("mlxsw: core: Extend thermal module with per QSFP module thermal zones") Signed-off-by:
-
- 09 Jan, 2021 12 commits
-
-
Hoang Le authored
The buffer list can have zero skb as following path: tipc_named_node_up()->tipc_node_xmit()->tipc_link_xmit(), so we need to check the list before casting an &sk_buff. Fault report: [] tipc: Bulk publication failure [] general protection fault, probably for non-canonical [#1] PREEMPT [...] [] KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] [] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 5.10.0-rc4+ #2 [] Hardware name: Bochs ..., BIOS Bochs 01/01/2011 [] RIP: 0010:tipc_link_xmit+0xc1/0x2180 [] Code: 24 b8 00 00 00 00 4d 39 ec 4c 0f 44 e8 e8 d7 0a 10 f9 48 [...] [] RSP: 0018:ffffc90000006ea0 EFLAGS: 00010202 [] RAX: dffffc0000000000 RBX: ffff8880224da000 RCX: 1ffff11003d3cc0d [] RDX: 0000000000000019 RSI: ffffffff886007b9 RDI: 00000000000000c8 [] RBP: ffffc90000007018 R08: 0000000000000001 R09: fffff52000000ded [] R10: 0000000000000003 R11: fffff52000000dec R12: ffffc90000007148 [] R13: 0000000000000000 R14: 0000000000000000 R15: ffffc90000007018 [] FS: 0000000000000000(0000) GS:ffff888037400000(0000) knlGS:000[...] [] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [] CR2: 00007fffd2db5000 CR3: 000000002b08f000 CR4: 00000000000006f0 Fixes: af9b028e ("tipc: make media xmit call outside node spinlock context") Acked-by:
Jon Maloy <jmaloy@redhat.com> Signed-off-by:
Hoang Le <hoang.h.le@dektech.com.au> Link: https://lore.kernel.org/r/20210108071337.3598-1-hoang.h.le@dektech.com.auSigned-off-by:
-
Vadim Fedorenko authored
TLS selftests where broken because of wrong variable types used. Fix it by changing u16 -> uint16_t Fixes: 4f336e88 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests") Reported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
Vadim Fedorenko <vfedorenko@novek.ru> Link: https://lore.kernel.org/r/1610141865-7142-1-git-send-email-vfedorenko@novek.ruSigned-off-by:
-
Aya Levin authored
There are cases where GSO segment's length exceeds the egress MTU: - Forwarding of a TCP GRO skb, when DF flag is not set. - Forwarding of an skb that arrived on a virtualisation interface (virtio-net/vhost/tap) with TSO/GSO size set by other network stack. - Local GSO skb transmitted on an NETIF_F_TSO tunnel stacked over an interface with a smaller MTU. - Arriving GRO skb (or GSO skb in a virtualised environment) that is bridged to a NETIF_F_TSO tunnel stacked over an interface with an insufficient MTU. If so: - Consume the SKB and its segments. - Issue an ICMP packet with 'Packet Too Big' message containing the MTU, allowing the source host to reduce its Path MTU appropriately. Note: These cases are handled in the same manner in IPv4 output finish. This patch aligns the behavior of IPv6 and the one of IPv4. Fixes: 9e508490 ("netfilter: ipv6: move POSTROUTING invocation before fragmentation") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/1610027418-30438-1-git-send-email-ayal@nvidia.comSigned-off-by:
-
Manish Chopra authored
For all PCI functions on the netxen_nic adapter, interrupt mode (INTx or MSI) configuration is dependent on what has been configured by the PCI function zero in the shared interrupt register, as these adapters do not support mixed mode interrupts among the functions of a given adapter. Logic for setting MSI/MSI-x interrupt mode in the shared interrupt register based on PCI function id zero check is not appropriate for all family of netxen adapters, as for some of the netxen family adapters PCI function zero is not really meant to be probed/loaded in the host but rather just act as a management function on the device, which caused all the other PCI functions on the adapter to always use legacy interrupt (INTx) mode instead of choosing MSI/MSI-x interrupt mode. This patch replaces that check with port number so that for all type of adapters driver attempts for MSI/MSI-x interrupt modes. Fixes: b37eb210 ("netxen_nic: Avoid mixed mode interrupts") Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20210107101520.6735-1-manishc@marvell.comSigned-off-by:
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== net: fix issues around register_netdevice() failures This series attempts to clean up the life cycle of struct net_device. Dave has added dev->needs_free_netdev in the past to fix double frees, we can lean on that mechanism a little more to fix remaining issues with register_netdevice(). This is the next chapter of the saga which already includes: commit 0e0eee24 ("net: correct error path in rtnl_newlink()") commit e51fb152 ("rtnetlink: fix a memory leak when ->newlink fails") commit cf124db5 ("net: Fix inconsistent teardown and release of private netdev state.") commit 93ee31f1 ("[NET]: Fix free_netdev on register_netdev failure.") commit 814152a8 ("net: fix memleak in register_netdevice()") commit 10cc514f ("net: Fix null de-reference of device refcount") The immediate problem which gets fixed here is that calling free_netdev() right after unregister_netdevice() is illegal because we need to release rtnl_lock first, to let the unregistration finish. Note that unregister_netdevice() is just a wrapper of unregister_netdevice_queue(), it only does half of the job. Where this limitation becomes most problematic is in failure modes of register_netdevice(). There is a notifier call right at the end of it, which lets other subsystems veto the entire thing. At which point we should really go through a full unregister_netdevice(), but we can't because callers may go straight to free_netdev() after the failure, and that's no bueno (see the previous paragraph). This set makes free_netdev() more lenient, when device is still being unregistered free_netdev() will simply set dev->needs_free_netdev and let the unregister process do the freeing. With the free_netdev() problem out of the way failures in register_netdevice() can make use of net_todo, again. Users are still expected to call free_netdev() right after failure but that will only set dev->needs_free_netdev. To prevent the pathological case of: dev->needs_free_netdev = true; if (register_netdevice(dev)) { rtnl_unlock(); free_netdev(dev); } make register_netdevice()'s failure clear dev->needs_free_netdev. Problems described above are only present with register_netdevice() / unregister_netdevice(). We have two parallel APIs for registration of devices: - those called outside rtnl_lock (register_netdev(), and unregister_netdev()); - and those to be used under rtnl_lock - register_netdevice() and unregister_netdevice(). The former is trivial and has no problems. The alternative approach to fix the latter would be to also separate the freeing functions - i.e. add free_netdevice(). This has been implemented (incl. converting all relevant calls in the tree) but it feels a little unnecessary to put the burden of choosing the right free_netdev{,ice}() call on the programmer when we can "just do the right thing" by default. ==================== Link: https://lore.kernel.org/r/20210106184007.1821480-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
If register_netdevice() fails at the very last stage - the notifier call - some subsystems may have already seen it and grabbed a reference. struct net_device can't be freed right away without calling netdev_wait_all_refs(). Now that we have a clean interface in form of dev->needs_free_netdev and lenient free_netdev() we can undo what commit 93ee31f1 ("[NET]: Fix free_netdev on register_netdev failure.") has done and complete the unregistration path by bringing the net_set_todo() call back. After registration fails user is still expected to explicitly free the net_device, so make sure ->needs_free_netdev is cleared, otherwise rolling back the registration will cause the old double free for callers who release rtnl_lock before the free. This also solves the problem of priv_destructor not being called on notifier error. net_set_todo() will be moved back into unregister_netdevice_queue() in a follow up. Reported-by:
Hulk Robot <hulkci@huawei.com> Reported-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
-
Jakub Kicinski authored
There are two flavors of handling netdev registration: - ones called without holding rtnl_lock: register_netdev() and unregister_netdev(); and - those called with rtnl_lock held: register_netdevice() and unregister_netdevice(). While the semantics of the former are pretty clear, the same can't be said about the latter. The netdev_todo mechanism is utilized to perform some of the device unregistering tasks and it hooks into rtnl_unlock() so the locked variants can't actually finish the work. In general free_netdev() does not mix well with locked calls. Most drivers operating under rtnl_lock set dev->needs_free_netdev to true and expect core to make the free_netdev() call some time later. The part where this becomes most problematic is error paths. There is no way to unwind the state cleanly after a call to register_netdevice(), since unreg can't be performed fully without dropping locks. Make free_netdev() more lenient, and defer the freeing if device is being unregistered. This allows error paths to simply call free_netdev() both after register_netdevice() failed, and after a call to unregister_netdevice() but before dropping rtnl_lock. Simplify the error paths which are currently doing gymnastics around free_netdev() handling. Signed-off-by: -
Jakub Kicinski authored
Explain the two basic flows of struct net_device's operation. Signed-off-by: -
Tom Parkin authored
When setting up a channel bridge, ppp_bridge_channels sets the pch->bridge field before taking the associated reference on the bridge file instance. This opens up a refcount underflow bug if ppp_bridge_channels called via. iotcl runs concurrently with ppp_unbridge_channels executing via. file release. The bug is triggered by ppp_bridge_channels taking the error path through the 'err_unset' label. In this scenario, pch->bridge is set, but the reference on the bridged channel will not be taken because the function errors out. If ppp_unbridge_channels observes pch->bridge before it is unset by the error path, it will erroneously drop the reference on the bridged channel and cause a refcount underflow. To avoid this, ensure that ppp_bridge_channels holds a reference on each channel in advance of setting the bridge pointers. Signed-off-by:
Tom Parkin <tparkin@katalix.com> Fixes: 4cf476ce ("ppp: add PPPIOCBRIDGECHAN and PPPIOCUNBRIDGECHAN ioctls") Acked-by:
Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/20210107181315.3128-1-tparkin@katalix.comSigned-off-by:
-
Baptiste Lepers authored
reuse->socks[] is modified concurrently by reuseport_add_sock. To prevent reading values that have not been fully initialized, only read the array up until the last known safe index instead of incorrectly re-reading the last index of the array. Fixes: acdcecc6 ("udp: correct reuseport selection with connected sockets") Signed-off-by:
Baptiste Lepers <baptiste.lepers@gmail.com> Acked-by:
-
Dongseok Yi authored
skbs in fraglist could be shared by a BPF filter loaded at TC. If TC writes, it will call skb_ensure_writable -> pskb_expand_head to create a private linear section for the head_skb. And then call skb_clone_fraglist -> skb_get on each skb in the fraglist. skb_segment_list overwrites part of the skb linear section of each fragment itself. Even after skb_clone, the frag_skbs share their linear section with their clone in PF_PACKET. Both sk_receive_queue of PF_PACKET and PF_INET (or PF_INET6) can have a link for the same frag_skbs chain. If a new skb (not frags) is queued to one of the sk_receive_queue, multiple ptypes can see and release this. It causes use-after-free. [ 4443.426215] ------------[ cut here ]------------ [ 4443.426222] refcount_t: underflow; use-after-free. [ 4443.426291] WARNING: CPU: 7 PID: 28161 at lib/refcount.c:190 refcount_dec_and_test_checked+0xa4/0xc8 [ 4443.426726] pstate: 60400005 (nZCv daif +PAN -UAO) [ 4443.426732] pc : refcount_dec_and_test_checked+0xa4/0xc8 [ 4443.426737] lr : refcount_dec_and_test_checked+0xa0/0xc8 [ 4443.426808] Call trace: [ 4443.426813] refcount_dec_and_test_checked+0xa4/0xc8 [ 4443.426823] skb_release_data+0x144/0x264 [ 4443.426828] kfree_skb+0x58/0xc4 [ 4443.426832] skb_queue_purge+0x64/0x9c [ 4443.426844] packet_set_ring+0x5f0/0x820 [ 4443.426849] packet_setsockopt+0x5a4/0xcd0 [ 4443.426853] __sys_setsockopt+0x188/0x278 [ 4443.426858] __arm64_sys_setsockopt+0x28/0x38 [ 4443.426869] el0_svc_common+0xf0/0x1d0 [ 4443.426873] el0_svc_handler+0x74/0x98 [ 4443.426880] el0_svc+0x8/0xc Fixes: 3a1296a3 (net: Support GRO/GSO fraglist chaining.) Signed-off-by:
Dongseok Yi <dseok.yi@samsung.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/r/1610072918-174177-1-git-send-email-dseok.yi@samsung.comSigned-off-by:
-
Stephan Gerhold authored
At the moment it is quite hard to identify the network interface provided by IPA in userspace components: The network interface is created as virtual device, without any link to the IPA device. The interface name ("rmnet_ipa%d") is the only indication that the network interface belongs to IPA, but this is not very reliable. Add SET_NETDEV_DEV() to associate the network interface with the IPA parent device. This allows userspace services like ModemManager to properly identify that this network interface is provided by IPA and belongs to the modem. Cc: Alex Elder <elder@kernel.org> Fixes: a646d6ec ("soc: qcom: ipa: modem and microcontroller") Signed-off-by:Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210106100755.56800-1-stephan@gerhold.netSigned-off-by:
-
- 08 Jan, 2021 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull more networking fixes from Jakub Kicinski: "Slightly lighter pull request to get back into the Thursday cadence. Current release - always broken: - can: mcp251xfd: fix Tx/Rx ring buffer driver race conditions - dsa: hellcreek: fix led_classdev build errors Previous releases - regressions: - ipv6: fib: flush exceptions when purging route to avoid netdev reference leak - ip_tunnels: fix pmtu check in nopmtudisc mode - ip: always refragment ip defragmented packets to avoid MTU issues when forwarding through tunnels, correct "packet too big" message is prohibitively tricky to generate - s390/qeth: fix locking for discipline setup / removal and during recovery to prevent both deadlocks and races - mlx5: Use port_num 1 instead of 0 when delete a RoCE address Previous releases - always broken: - cdc_ncm: correct overhead calculation in delayed_ndp_size to prevent out of bound accesses with Huawei 909s-120 LTE module - fix stmmac dwmac-sun8i suspend/resume: - PHY being left powered off - MAC syscon configuration being reset - reference to the reset controller being improperly dropped - qrtr: fix null-ptr-deref in qrtr_ns_remove - can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver - mlx5e: CT: Use per flow counter when CT flow accounting is enabled - mlx5e: Fix SWP offsets when vlan inserted by driver Misc: - bpf: Fix a task_iter bug caused by a bpf -> net merge conflict resolution And the usual many fixes to various error paths" * tag 'net-5.11-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) net: dsa: lantiq_gswip: Exclude RMII from modes that report 1 GbE s390/qeth: fix L2 header access in qeth_l3_osa_features_check() s390/qeth: fix locking for discipline setup / removal s390/qeth: fix deadlock during recovery selftests: fib_nexthops: Fix wrong mausezahn invocation nexthop: Bounce NHA_GATEWAY in FDB nexthop groups nexthop: Unlink nexthop group entry in error path nexthop: Fix off-by-one error in error path octeontx2-af: fix memory leak of lmac and lmac->name chtls: Fix chtls resources release sequence chtls: Added a check to avoid NULL pointer dereference chtls: Replace skb_dequeue with skb_peek chtls: Avoid unnecessary freeing of oreq pointer chtls: Fix panic when route to peer not configured chtls: Remove invalid set_tcb call chtls: Fix hardware tid leak net: ip: always refragment ip defragmented packets net: fix pmtu check in nopmtudisc mode selftests: netfilter: add selftest for ipip pmtu discovery with enabled connection tracking docs: octeontx2: tune rst markup ... -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a functional bug in arm/chacha-neon as well as a potential buffer overflow in ecdh" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ecdh - avoid buffer overflow in ecdh_set_secret() crypto: arm/chacha-neon - add missing counter increment
-
Linus Torvalds authored
The kernel test robot reported a -5.8% performance regression on the "poll2" test of will-it-scale, and bisected it to commit d55564cf ("x86: Make __put_user() generate an out-of-line call"). I didn't expect an out-of-line __put_user() to matter, because no normal core code should use that non-checking legacy version of user access any more. But I had overlooked the very odd poll() usage, which does a __put_user() to update the 'revents' values of the poll array. Now, Al Viro correctly points out that instead of updating just the 'revents' field, it would be much simpler to just copy the _whole_ pollfd entry, and then we could just use "copy_to_user()" on the whole array of entries, the same way we use "copy_from_user()" a few lines earlier to get the original values. But that is not what we've traditionally done, and I worry that threaded applications might be concurrently modifying the other fields of the pollfd array. So while Al's suggestion is simpler - and perhaps worth trying in the future - this instead keeps the "just update revents" model. To fix the performance regression, use the modern "unsafe_put_user()" instead of __put_user(), with the proper "user_write_access_begin()" guarding in place. This improves code generation enormously. Link: https://lore.kernel.org/lkml/20210107134723.GA28532@xsang-OptiPlex-9020/Reported-by:
-
Petr Mladek authored
This reverts commit 757055ae. The commit caused that ttynull was used as the default console on several systems[1][2][3]. As a result, the console was blank even when a better alternative existed. It happened when there was no console configured on the command line and ttynull_init() was the first initcall calling register_console(). Or it happened when /dev/ did not exist when console_on_rootfs() was called. It was not able to open /dev/console even though a console driver was registered. It tried to add ttynull console but it obviously did not help. But ttynull became the preferred console and was used by /dev/console when it was available later. The commit tried to fix a historical problem that have been there for ages. The primary motivation was the commit 3cffa06a ("printk/console: Allow to disable console output by using console="" or console=null"). It provided a clean solution for a workaround that was widely used and worked only by chance. This revert causes that the console="" or console=null command line options will again work only by chance. These options will cause that a particular console will be preferred and the default (tty) ones will not get enabled. There will be no console registered at all. As a result there won't be stdin, stdout, and stderr for the init process. But it worked exactly this way even before. The proper solution has to fulfill many conditions: + Register ttynull only when explicitly required or as the ultimate fallback. + ttynull should get associated with /dev/console but it must not become preferred console when used as a fallback. Especially, it must still be possible to replace it by a better console later. Such a change requires clean up of the register_console() code. Otherwise, it would be even harder to follow. Especially, the use of has_preferred_console and CON_CONSDEV flag is tricky. The clean up is risky. The ordering of consoles is not well defined. And any changes tend to break existing user settings. Do the revert at the least risky solution for now. [1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/ [2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/ [3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/Reported-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by:
Vineet Gupta <vgupta@synopsys.com> Reported-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
Petr Mladek <pmladek@suse.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2021-01-07 * tag 'mlx5-fixes-2021-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: Fix memleak in mlx5e_create_l2_table_groups net/mlx5e: Fix two double free cases net/mlx5: Release devlink object if adev fails net/mlx5e: ethtool, Fix restriction of autoneg with 56G net/mlx5e: In skb build skip setting mark in switchdev mode net/mlx5: E-Switch, fix changing vf VLANID net/mlx5e: Fix SWP offsets when vlan inserted by driver net/mlx5e: CT: Use per flow counter when CT flow accounting is enabled net/mlx5: Use port_num 1 instead of 0 when delete a RoCE address net/mlx5e: Add missing capability check for uplink follow net/mlx5: Check if lag is supported before creating one ==================== Link: https://lore.kernel.org/r/20210107202845.470205-1-saeed@kernel.orgSigned-off-by:
-
Aleksander Jan Bajkowski authored
Exclude RMII from modes that report 1 GbE support. Reduced MII supports up to 100 MbE. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Reviewed-by:
-
Jakub Kicinski authored
Julian Wiedmann says: ==================== s390/qeth: fixes 2021-01-07 This brings two locking fixes for the device control path. Also one fix for a path where our .ndo_features_check() attempts to access a non-existent L2 header. ==================== Link: https://lore.kernel.org/r/20210107172442.1737-1-jwi@linux.ibm.comSigned-off-by:
-
Julian Wiedmann authored
ip_finish_output_gso() may call .ndo_features_check() even before the skb has a L2 header. This conflicts with qeth_get_ip_version()'s attempt to inspect the L2 header via vlan_eth_hdr(). Switch to vlan_get_protocol(), as already used further down in the common qeth_features_check() path. Fixes: f13ade19 ("s390/qeth: run non-offload L3 traffic over common xmit path") Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Due to insufficient locking, qeth_core_set_online() and qeth_dev_layer2_store() can run in parallel, both attempting to load & setup the discipline (and stepping on each other toes along the way). A similar race can also occur between qeth_core_remove_device() and qeth_dev_layer2_store(). Access to .discipline is meant to be protected by the discipline_mutex, so add/expand the locking in qeth_core_remove_device() and qeth_core_set_online(). Adjust the locking in qeth_l*_remove_device() accordingly, as it's now handled by the callers in a consistent manner. Based on an initial patch by Ursula Braun. Fixes: 9dc48ccc ("qeth: serialize sysfs-triggered device configurations") Signed-off-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
When qeth_dev_layer2_store() - holding the discipline_mutex - waits inside qeth_l*_remove_device() for a qeth_do_reset() thread to complete, we can hit a deadlock if qeth_do_reset() concurrently calls qeth_set_online() and thus tries to aquire the discipline_mutex. Move the discipline_mutex locking outside of qeth_set_online() and qeth_set_offline(), and turn the discipline into a parameter so that callers understand the dependency. To fix the deadlock, we can now relax the locking: As already established, qeth_l*_remove_device() waits for qeth_do_reset() to complete. So qeth_do_reset() itself is under no risk of having card->discipline ripped out while it's running, and thus doesn't need to take the discipline_mutex. Fixes: 9dc48ccc ("qeth: serialize sysfs-triggered device configurations") Signed-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== nexthop: Various fixes This series contains various fixes for the nexthop code. The bugs were uncovered during the development of resilient nexthop groups. Patches #1-#2 fix the error path of nexthop_create_group(). I was not able to trigger these bugs with current code, but it is possible with the upcoming resilient nexthop groups code which adds a user controllable memory allocation further in the function. Patch #3 fixes wrong validation of netlink attributes. Patch #4 fixes wrong invocation of mausezahn in a selftest. ==================== Link: https://lore.kernel.org/r/20210107144824.1135691-1-idosch@idosch.orgSigned-off-by:
-
Ido Schimmel authored
For IPv6 traffic, mausezahn needs to be invoked with '-6'. Otherwise an error is returned: # ip netns exec me mausezahn veth1 -B 2001:db8:101::2 -A 2001:db8:91::1 -c 0 -t tcp "dp=1-1023, flags=syn" Failed to set source IPv4 address. Please check if source is set to a valid IPv4 address. Invalid command line parameters! Fixes: 7c741868 ("selftests: Add torture tests to nexthop tests") Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Petr Machata authored
The function nh_check_attr_group() is called to validate nexthop groups. The intention of that code seems to have been to bounce all attributes above NHA_GROUP_TYPE except for NHA_FDB. However instead it bounces all these attributes except when NHA_FDB attribute is present--then it accepts them. NHA_FDB validation that takes place before, in rtm_to_nh_config(), already bounces NHA_OIF, NHA_BLACKHOLE, NHA_ENCAP and NHA_ENCAP_TYPE. Yet further back, NHA_GROUPS and NHA_MASTER are bounced unconditionally. But that still leaves NHA_GATEWAY as an attribute that would be accepted in FDB nexthop groups (with no meaning), so long as it keeps the address family as unspecified: # ip nexthop add id 1 fdb via 127.0.0.1 # ip nexthop add id 10 fdb via default group 1 The nexthop code is still relatively new and likely not used very broadly, and the FDB bits are newer still. Even though there is a reproducer out there, it relies on an improbable gateway arguments "via default", "via all" or "via any". Given all this, I believe it is OK to reformulate the condition to do the right thing and bounce NHA_GATEWAY. Fixes: 38428d68 ("nexthop: support for fdb ecmp nexthops") Signed-off-by:
-
Ido Schimmel authored
In case of error, remove the nexthop group entry from the list to which it was previously added. Fixes: 430a0491 ("nexthop: Add support for nexthop groups") Signed-off-by:
-
