- 18 Dec, 2017 25 commits
-
-
Mauro Carvalho Chehab authored
The description there is completely broken and it mentions an ioctl that doesn't exist. Fix it. Signed-off-by:Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Mauro Carvalho Chehab authored
When generating Sphinx output, create cross-references for the callbacks for each ioctl. While here, fix a few wrong names for ioctls. Signed-off-by: -
Mauro Carvalho Chehab authored
Convert #defines to enums and add kernel-doc markups for V4L2 video_device flags. Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The V4L_DIR_* direction flags document the direction for a V4L2 device node. Convert them to enum and document. Acked-by:
-
Mauro Carvalho Chehab authored
In the past, the same I2C address were used on multiple places. After I2C rebinding changes, this is no longer needed. So, we can just get rid of this header, placing the I2C address where they belong, e. g. either at bttv driver or at tvtuner. Acked-by:
-
Mauro Carvalho Chehab authored
Some of the previously used I2C addresses there aren't used anymore. So, get rid of them. Acked-by:
-
Mauro Carvalho Chehab authored
Using enums makes easier to document, as it can use kernel-doc markups. It also allows cross-referencing, with increases the kAPI readability. Please notice that now cx88_querycap() has to have a default for the VFL type, as there are more types than supported by the driver. Acked-By:
Mike Isely <isely@pobox.com> Acked-by:
-
Mauro Carvalho Chehab authored
Instead of using (1 << n) for bits, use the BIT() macro, as it makes a difference from documentation point of view. Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
There are two helper functions at v4l2-flash-led-class.h that aren't documented. Document them. Acked-by:
-
Mauro Carvalho Chehab authored
There are two macros at v4l2-dev.h that aren't documented. Document them, for completeness. Acked-by:
-
Mauro Carvalho Chehab authored
Both v4l2-event.rst and v4l2-event.h have an overview of events, but there are some inconsistencies there: - at v4l2-event, the event's ring buffer is called kevent. Its name is, instead, v4l2_kevent; - Some things are mentioned on both places (with different words), others are either on one of the files. In order to cleanup this mess, put everything at v4l2-event.rst and improve it to be a little more coherent and to have cross references. Acked-by:
-
Mauro Carvalho Chehab authored
Now that nested structs are parsed by kernel-doc, add markups to them. Acked-by:
-
Mauro Carvalho Chehab authored
Now that nested structs are supported, change the documentation to use it. While here, add cross-references where pertinent and use monotonic fonts where pertinent, using the right markup tags. Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
There are a few nested members at v4l2-ctrls.h. Now that kernel-doc supports, document them. Acked-by:
-
Mauro Carvalho Chehab authored
Better document the bus union at struct v4l2_fwnode_endpoint. Acked-by:
-
Mauro Carvalho Chehab authored
The description of this enum doesn't match what it actually represents. Adjust it. Acked-by:
-
Mauro Carvalho Chehab authored
The RC core does several assumptions, but those aren't documented anywhere, with could make harder for ones that want to understand what's there. So, add an introduction explaining the basic concepts of RC and how they're related to the RC core implementation. Acked-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
The can_reduce_fps() is already documented, but it is not using the kernel-doc markup. Convert it, in order to generate documentation from it. Acked-by:
-
Mauro Carvalho Chehab authored
There are several helper functions that aren't documented. Document them. Acked-by:
-
Mauro Carvalho Chehab authored
This struct is there just two store two arguments of v4l2_find_nearest_format(). The other two arguments are passed as parameter. IMHO, there isn't much sense on doing that, and that will just add one more struct to document ;) So, let's get rid of the struct, passing the parameters directly. Acked-by:
-
Mauro Carvalho Chehab authored
This struct is not used anymore. Get rid of it and update the documentation about what should still be converted. Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
-
Mauro Carvalho Chehab authored
This struct is lacking documentation. Add it. Acked-by:
-
Mauro Carvalho Chehab authored
There are some nested structs on this header, with aren't properly document them. This should solve some warnings after the addition of a patche at kernel-doc adding support for nested structs/unions. Signed-off-by: -
Mauro Carvalho Chehab authored
There are some nested structs on this header, with aren't properly document them. This should solve some warnings after the addition of a patche at kernel-doc adding support for nested structs/unions. Signed-off-by: -
Mauro Carvalho Chehab authored
There are some nested structs on this header, with aren't properly document them. This should solve some warnings after the addition of a patche at kernel-doc adding support for nested structs/unions. Signed-off-by:
-
- 15 Dec, 2017 11 commits
-
-
Steve Longerbeam authored
Update TODO file: - Remove TODO info about the OV564x driver, while this still needs to be done (add a OV5642 driver or merge with OV5640 driver), it is not relevant here. - Update TODO about methods for retrieving CSI bus config. - Add some TODO's about OF graph parsing restrictions. Signed-off-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by:
-
Steve Longerbeam authored
Re-order some of the function prototypes in imx-media.h to group them correctly by source file. No functional changes. Signed-off-by:
-
Steve Longerbeam authored
Although not technically necessary because imx-media has only a maximum of 8 video devices, and once setup the video device lists are static, in anticipation of moving control ineritance to v4l2-core, make the vdev lists more generic by converting to dynamic list_head's. After doing that, 'struct imx_media_pad' is now just a list_head of video devices reachable from a pad. Allocate an array of list_head's, one list_head for each pad, and attach that array to sd->host_priv. An entry in the pad lists is of type 'struct imx_media_pad_vdev', and points to a video device from the master list. Signed-off-by:
-
Steve Longerbeam authored
For more complex OF graphs, there will be more async subdevices registered. Remove the static subdev[IMX_MEDIA_MAX_SUBDEVS] array, so that imx-media places no limits on the number of async subdevs that can be added and registered. There were two uses for 'struct imx_media_subdev'. First was to act as the async subdev list to be passed to v4l2_async_notifier_register(). Second was to aid in inheriting subdev controls to the capture devices, and this is done by creating a list of capture devices that can be reached from a subdev's source pad. So 'struct imx_media_subdev' also contained a static array of 'struct imx_media_pad' for placing the capture device lists at each pad. 'struct imx_media_subdev' has been completely removed. Instead, at async completion, allocate an array of 'struct imx_media_pad' and attach it to the subdev's host_priv pointer, in order to support subdev controls inheritance. Likewise, remove static async_ptrs[IMX_MEDIA_MAX_SUBDEVS] array. Instead, allocate a 'struct imx_media_async_subdev' when forming the async list, and add it to an asd_list list_head in imx_media_add_async_subdev(). At async completion, allocate the asd pointer list and pull the asd's off asd_list for v4l2_async_notifier_register(). Signed-off-by:
-
Steve Longerbeam authored
Pass the subdev's fwnode_handle to imx_media_find_async_subdev() and imx_media_add_async_subdev(), instead of a device_node. Signed-off-by:
-
Steve Longerbeam authored
A separate string for the device name, for DEVNAME async match, was never needed. Just assign the asd device name to the passed platform device name pointer in imx_media_add_async_subdev(). Signed-off-by:
-
Steve Longerbeam authored
Calling of_parse_subdev() recursively to a downstream path that has already been followed is ok, it just means that call will return immediately since the subdevice was already added to the async list. With that there is no need to determine whether a subdevice's port is a sink or source, so 'num_{sink|src}_pads' is no longer used and is removed. Signed-off-by: -
Steve Longerbeam authored
Remove the static list of media links that were formed at probe time. These links can instead be created after all registered async subdevices have been bound in imx_media_probe_complete(). The media links between subdevices that exist in the device tree, can be created post-async completion by using v4l2_fwnode_parse_link() for each endpoint node of that subdevice. Note this approach assumes device-tree ports are equivalent to media pads (pad index equals port id), and that device-tree endpoints are equivalent to media links between pads. Because links are no longer parsed by imx_media_of_parse(), its sole function is now only to add subdevices that it encounters by walking the OF graph to the async list, so the function has been renamed imx_media_add_of_subdevs(). Similarly, the media links between the IPU-internal subdevice pads (the CSI source pads, and all pads between the vdic, ic-prp, ic-prpenc, and ic-prpvf subdevices), can be created post-async completion by looping through the subdevice's media pads and using the const internal_subdev table. Because links are no longer parsed by imx_media_add_internal_subdevs(), this function no longer needs an array of CSI subdevs to form links from. In summary, the following functions, which were used to form a list of media links at probe time, are removed: imx_media_add_pad_link() add_internal_links() of_add_pad_link() replaced by these functions, called at probe time, which only populate the async subdev list: imx_media_add_of_subdevs() imx_media_add_internal_subdevs() and these functions, called at async completion, which create the media links: imx_media_create_of_links() imx_media_create_csi_of_links() imx_media_create_internal_links() Signed-off-by:
-
Steve Longerbeam authored
The imx-media driver currently supports a device tree graph of limited complexity. This patch is a first step in allowing imx-media to work with more general OF graphs. The CSI subdevice assumes the originating upstream subdevice (the "sensor") is connected directly to either the CSI mux or the MIPI CSI-2 receiver. But for more complex graphs, the sensor can be distant, with possible bridge entities in between. Thus the sensor's bus type could be quite different from what is entering the CSI. For example a distant sensor could have a parallel interface, but the stream entering the i.MX is MIPI CSI-2. To remove this assumption, get the entering bus config from the entity that is directly upstream from either the CSI mux, or the CSI-2 receiver. If the CSI-2 receiver is not in the enabled pipeline, the bus type to the CSI is parallel, otherwise the CSI is receiving MIPI CSI-2. Note that we can't use the direct upstream source connected to CSI (which is either the CSI mux or the CSI-2 receiver) to determine bus type. The bus entering the CSI from the CSI-2 receiver is a 32-bit parallel bus containing the demultiplexed MIPI CSI-2 virtual channels. But the CSI and its IDMAC channels must be configured based on whether it is receiving data from the CSI-2 receiver or from the CSI mux's parallel interface pins. The function csi_get_upstream_endpoint() is used to find this endpoint. It makes use of a new utility function imx_media_find_upstream_pad(), that if given a grp_id of 0, will return the closest upstream pad from start_entity. With these changes, imx_media_find_sensor() is no longer used and is removed. As a result there is also no longer a need to identify any sensor or set the sensor subdev's group id as a method to search for it. So IMX_MEDIA_GRP_ID_SENSOR is removed. Also the video-mux group id IMX_MEDIA_GRP_ID_VIDMUX was never used so that is removed as well. The remaining IMX_MEDIA_GRP_ID_* definitions are entities internal to the i.MX. Another use of imx_media_find_sensor() in the CSI was to call the sensor's g_skip_frames op to determine if a delay was needed before enabling the CSI at stream on. If necessary this will have to be re-addressed at a later time. Signed-off-by:
-
Arnd Bergmann authored
A typical code fragment was copied across many dvb-frontend drivers and causes large stack frames when built with with CONFIG_KASAN on gcc-5/6/7: drivers/media/dvb-frontends/cxd2841er.c:3225:1: error: the frame size of 3992 bytes is larger than 3072 bytes [-Werror=frame-larger-than=] drivers/media/dvb-frontends/cxd2841er.c:3404:1: error: the frame size of 3136 bytes is larger than 3072 bytes [-Werror=frame-larger-than=] drivers/media/dvb-frontends/stv0367.c:3143:1: error: the frame size of 4016 bytes is larger than 3072 bytes [-Werror=frame-larger-than=] drivers/media/dvb-frontends/stv090x.c:3430:1: error: the frame size of 5312 bytes is larger than 3072 bytes [-Werror=frame-larger-than=] drivers/media/dvb-frontends/stv090x.c:4248:1: error: the frame size of 4872 bytes is larger than 3072 bytes [-Werror=frame-larger-than=] gcc-8 now solves this by consolidating the stack slots for the argument variables, but on older compilers we can get the same behavior by taking the pointer of a local variable rather than the inline function argument. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Cc: stable@vger.kernel.org Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Arnd Bergmann authored
With CONFIG_KASAN, we get an overly long stack frame due to inlining the register access functions: drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7': drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] This is caused by a gcc bug that has now been fixed in gcc-8. To work around the problem, we can pass the register data through a local variable that older gcc versions can optimize out as well. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715Signed-off-by:
-
- 14 Dec, 2017 4 commits
-
-
Hans Verkuil authored
Rename soc_camera to pxa_camera as this has no longer anything to do with the old soc_camera driver/framework. It's confusing when grepping on soc_camera. Signed-off-by:
-
Hans Verkuil authored
The description of V4L2_DV_FL_HALF_LINE mixed up frontporch with backporch. It's the backporch that has different sizes for interlaced formats, the frontporch remains constant. Signed-off-by:
-
Daniel Scheller authored
Prefix dev_*() I2C address prints with 0x, change CXD2099 to CXD2099AR, change the MODULE_DESCRIPTION to a proper one and have a better (and shorter) description for the buffermode modparam. Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
Jasmin Jessich <jasmin@anw.at> Signed-off-by:
-
Daniel Scheller authored
Debug messages should go to KERN_DEBUG, thus change the slot_shutdown() notice from dev_info() to dev_dbg(). Signed-off-by:
-
