- 29 Feb, 2012 1 commit
-
-
Takashi Iwai authored
It seems that Lenovo machines (or codec chip itself?) leave the unsol event tags and the enablement-flag from other pins bogusly even on the unused pins. Although this shouldn't be too critical, it's better to clear them up sanely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 28 Feb, 2012 3 commits
-
-
Takashi Iwai authored
The docking-station of Thinkpad X200 & co supports also an SPDIF output, and the corresponding pin 0x1c has to be enabled for using it. Reported-and-tested-by: Sebastian Glita <sebastian.glita@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
This patch adds a new position_fix option value, 4, as a combo mode to use LPIB for playbacks and POSBUF for captures. It's the way recommended by Intel hardware guys. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Vitaliy Kulikov authored
Enables port E of IDT 92HD91 codec as output and sets correct output phase between ports E and D and high pass filter. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 23 Feb, 2012 1 commit
-
-
Wu Fengguang authored
[the order sorted by tiwai] Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 22 Feb, 2012 2 commits
-
-
Takashi Iwai authored
Added sanity checks in a few places not to assume the pins having the certain amp caps or the input-source being always assigned to a mux. No actual bugs have been triggered by these, but surely better to be a bit more robust. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The driver may create duplicated mic boost controls when there are multiple mics with the very same type / location, and this leads to the error at actual kcontrol creation. It needs to check the validity of the created control and add a proper index if it's duplicated. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 21 Feb, 2012 7 commits
-
-
Takashi Iwai authored
A few clean-ups for post-static-quirk time: - Call alc_auto_init_std() statically in alc_init() instead of setting spec->init_hook in each caller. spec->init_hook field is left unused for any future use. - Move the call of set_capture_mixer() to to alc_parse_auto_config() instead of each caller. - Get rid of the ADC-filling and imux check in each parser function. This is no longer needed since the auto-parser always check ADCs and imux. It was only for the static quirks. - Kill unused defines Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When the machine has two speakers but wants to put more multi-io jacks, the parser shouldn't consider about the shared DAC but try to assign the individual DACs. Otherwise the channel mapping would be fairly confused and lead to the wrong DACs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When the multi-io is added to the two speaker output configuration, the parser would try to add yet another "Bass Speaker" control since it checks only cfg->line_outs. Add a workaround for it by simply passing the channel name in the case of multi-io outputs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Even if the outputs are using shared DACs, we can still create individual mute siwtches since they are assigned per pin. This allows to create, e.g. Speaker and Bass Speaker mute switches while the single volume is used for these outputs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When BIOS is damn crazy and gives no pin-config at all, the driver might lead to a NULL dereference. Let's add a NULL check for such a case. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Similarly in patch_via.c, parse the active analog-loopback connections and create a list dynamically rather than static arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 20 Feb, 2012 11 commits
-
-
Takashi Iwai authored
If anyone wants to debug the driver and avoid the existing fix-ups, pass model=nofixup option. Then the driver will skip to pick up the fixup list. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
It turned out that BIOS on most of ASUS mobo's set the pin-config tables reasonably well for the auto-parser. We'd need GPIO setups, but should work as is other than that. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
ASUS W1V has a sane pin-config table set by BIOS. The only missing piece is the setup of GPIO1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
ASUS Z71V has a totally broken BIOS setup (at least the info I got), thus we need to override the whole pin-config table to make the auto-parser working correctly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
ALC880 model=uniwill-dig requires the fix-up of bogus BIOS pin default configurations. Other than that, it's pretty normal. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The model=uniwill would work almost as is, but a couple of adjustments are needed to make the mutli-io working correctly. The headphone and speaker pins have to be marked properly in pin configs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Uniwill p53 has a sane BIOS setup but just needs the volume-knob handling like Fujitsu laptops with ALC880. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Similar as the previous patch for model=fujitsu, we can now move the static quirk for F1734 to the auto-parser. The only difference is the default pin configurations: F1734 has less pins than Amilo's. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the whole setups of patch_ops & co, so that the fix-up function may override the default setup. This will be needed for installing the own unsol event handler (e.g. for volume-knob controls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 17 Feb, 2012 7 commits
-
-
Takashi Iwai authored
It needs a few extra setups for EAPD, but others look fairly straightforward. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Clevo machines with ALC880 are all well with proper BIOS setup. It seems still requiring the additional COEF setup for the EAPD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Refactor the DAC filling function to be used for both the primary line outputs and extra outputs using the individual badness tables. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The Medion W810 with ALC880 has a typical BIOS bug, copying the pin-defaults without disabling the unused pins. At least, the pin 0x17 must be disabled. Also, it requires GPIO-2 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
ALC880 model=lg could work fine with the auto-parser due to the recent rewrite, but it still needs the manual adjustment; namely, the BIOS leaves unused pins as some real active jacks. This confuses the parser. Thus we just cover these pins and override the pin-configs as a fix-up. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Try harder to fit the multi-io pins also by checking the hard-wired connections for multi-ios. Also, the badness values are adjusted to prioritize the multi-ios as more valuable. These changes will enable the multi-io on some machines without losing the current capability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
- 16 Feb, 2012 8 commits
-
-
Takashi Iwai authored
So far, the Realtek driver tires to assign the single-connected routes for all pins only once at the beginning. However, since some DACs have been already mapped, the rest pins might have also single conections. In this patch, the driver does the single-connection assignment in a loop until all possbile single-connections are checked. This will improve the DAC assignment, e.g. for ASUS G72. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
This patch improves the Realtek auto-parser for assigning the DACs and mixers in more suitable ways by evaluating the assignment with "badness" calculations. When assigning a DAC hinders the assignment of individual DACs for other pins, some badness point is given. Similarly, when it blocks the assignment of unique mixer controls, another badness point is added. Also, if no DAC, even shared DAC, can be assigned, more badness is pointed. Finally, comparing the accumulated badness, the best route is chosen among several trials. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
When the connections from the pin selector contain only two widgets, a route to DAC and the aa-mixer, it's certainly a single connection. In such a case, get_dac_if_single() should return the connected DAC, too. This will improve the detection of the individual DAC assignment for each pin. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The fix for bitmap-overflow in Realtek codec driver is needed for the further development of the auto-parser with badness evaluation.
-
Takashi Iwai authored
The bitmap introduced in the commit [527e4d73: ALSA: hda/realtek - Fix missing volume controls with ALC260] is too narrow for some codecs, which may have more NIDs than 0x20, thus it may overflow the bitmap array on them. Just double the number to cover all and also add a sanity-check code to be safer. Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
We've enabled the static fixups for ASUS machines with ALC269 codec, just for making things compatible during the transition to the auto- parser. However, it seems that the static configurations do more harmful than good, as some of entries don't match with the actual hardware setups. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
Now we can clean up all static quirks for ALC260. Also many codes in alc_quirks.c can be ripped off since they have been used only by ALC260 static quirks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
The model works with the auto-parser as is, thus now good to drop. Signed-off-by: Takashi Iwai <tiwai@suse.de>
-