- 31 Jan, 2020 27 commits
-
-
John Hubbard authored
An upcoming patch changes and complicates the refcounting and especially the "put page" aspects of it. In order to keep everything clean, refactor the devmap page release routines: * Rename put_devmap_managed_page() to page_is_devmap_managed(), and limit the functionality to "read only": return a bool, with no side effects. * Add a new routine, put_devmap_managed_page(), to handle decrementing the refcount for ZONE_DEVICE pages. * Change callers (just release_pages() and put_page()) to check page_is_devmap_managed() before calling the new put_devmap_managed_page() routine. This is a performance point: put_page() is a hot path, so we need to avoid non- inline function calls where possible. * Rename __put_devmap_managed_page() to free_devmap_managed_page(), and limit the functionality to unconditionally freeing a devmap page. This is originally based on a separate patch by Ira Weiny, which applied to an early version of the put_user_page() experiments. Since then, Jérôme Glisse suggested the refactoring described above. Link: http://lkml.kernel.org/r/20200107224558.2362728-5-jhubbard@nvidia.comSigned-off-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Suggested-by:
Jérôme Glisse <jglisse@redhat.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Williams authored
After the removal of the device-public infrastructure there are only 2 ->page_free() call backs in the kernel. One of those is a device-private callback in the nouveau driver, the other is a generic wakeup needed in the DAX case. In the hopes that all ->page_free() callbacks can be migrated to common core kernel functionality, move the device-private specific actions in __put_devmap_managed_page() under the is_device_private_page() conditional, including the ->page_free() callback. For the other page types just open-code the generic wakeup. Yes, the wakeup is only needed in the MEMORY_DEVICE_FSDAX case, but it does no harm in the MEMORY_DEVICE_DEVDAX and MEMORY_DEVICE_PCI_P2PDMA case. Link: http://lkml.kernel.org/r/20200107224558.2362728-4-jhubbard@nvidia.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Jérôme Glisse <jglisse@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
John Hubbard authored
An upcoming patch uses try_get_compound_head() more widely, so move it to the top of gup.c. Also fix a tiny spelling error and a checkpatch.pl warning. Link: http://lkml.kernel.org/r/20200107224558.2362728-3-jhubbard@nvidia.comSigned-off-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
John Hubbard authored
Patch series "mm/gup: prereqs to track dma-pinned pages: FOLL_PIN", v12. Overview: This is a prerequisite to solving the problem of proper interactions between file-backed pages, and [R]DMA activities, as discussed in [1], [2], [3], and in a remarkable number of email threads since about 2017. :) A new internal gup flag, FOLL_PIN is introduced, and thoroughly documented in the last patch's Documentation/vm/pin_user_pages.rst. I believe that this will provide a good starting point for doing the layout lease work that Ira Weiny has been working on. That's because these new wrapper functions provide a clean, constrained, systematically named set of functionality that, again, is required in order to even know if a page is "dma-pinned". In contrast to earlier approaches, the page tracking can be incrementally applied to the kernel call sites that, until now, have been simply calling get_user_pages() ("gup"). In other words, opt-in by changing from this: get_user_pages() (sets FOLL_GET) put_page() to this: pin_user_pages() (sets FOLL_PIN) unpin_user_page() Testing: * I've done some overall kernel testing (LTP, and a few other goodies), and some directed testing to exercise some of the changes. And as you can see, gup_benchmark is enhanced to exercise this. Basically, I've been able to runtime test the core get_user_pages() and pin_user_pages() and related routines, but not so much on several of the call sites--but those are generally just a couple of lines changed, each. Not much of the kernel is actually using this, which on one hand reduces risk quite a lot. But on the other hand, testing coverage is low. So I'd love it if, in particular, the Infiniband and PowerPC folks could do a smoke test of this series for me. Runtime testing for the call sites so far is pretty light: * io_uring: Some directed tests from liburing exercise this, and they pass. * process_vm_access.c: A small directed test passes. * gup_benchmark: the enhanced version hits the new gup.c code, and passes. * infiniband: Ran rdma-core tests: rdma-core/build/bin/run_tests.py * VFIO: compiles (I'm vowing to set up a run time test soon, but it's not ready just yet) * powerpc: it compiles... * drm/via: compiles... * goldfish: compiles... * net/xdp: compiles... * media/v4l2: compiles... [1] Some slow progress on get_user_pages() (Apr 2, 2019): https://lwn.net/Articles/784574/ [2] DMA and get_user_pages() (LPC: Dec 12, 2018): https://lwn.net/Articles/774411/ [3] The trouble with get_user_pages() (Apr 30, 2018): https://lwn.net/Articles/753027/ This patch (of 22): There are four locations in gup.c that have a fair amount of code duplication. This means that changing one requires making the same changes in four places, not to mention reading the same code four times, and wondering if there are subtle differences. Factor out the common code into static functions, thus reducing the overall line count and the code's complexity. Also, take the opportunity to slightly improve the efficiency of the error cases, by doing a mass subtraction of the refcount, surrounded by get_page()/put_page(). Also, further simplify (slightly), by waiting until the the successful end of each routine, to increment *nr. Link: http://lkml.kernel.org/r/20200107224558.2362728-2-jhubbard@nvidia.comSigned-off-by:
John Hubbard <jhubbard@nvidia.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Jérôme Glisse <jglisse@redhat.com> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wei Yang authored
No functional change, just leverage the helper function to improve readability as others. Link: http://lkml.kernel.org/r/20200113070322.26627-1-richardw.yang@linux.intel.comSigned-off-by:
Wei Yang <richardw.yang@linux.intel.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
David Rientjes <rientjes@google.com> Reviewed-by:
Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Qiujun Huang authored
sorry for not processing for a long time. I met it again. patch v1 https://lkml.org/lkml/2019/9/20/656 do_machine_check() do_memory_failure() memory_failure() hw_poison_user_mappings() try_to_unmap() pteval = swp_entry_to_pte(make_hwpoison_entry(subpage)); ...and now we have a swap entry that indicates that the page entry refers to a bad (and poisoned) page of memory, but gup_fast() at this level of the page table was ignoring swap entries, and incorrectly assuming that "!pxd_none() == valid and present". And this was not just a poisoned page problem, but a generaly swap entry problem. So, any swap entry type (device memory migration, numa migration, or just regular swapping) could lead to the same problem. Fix this by checking for pxd_present(), instead of pxd_none(). Link: http://lkml.kernel.org/r/1578479084-15508-1-git-send-email-hqjagain@gmail.comSigned-off-by:
Qiujun Huang <hqjagain@gmail.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ira Weiny authored
At some point filemap_write_and_wait() and filemap_write_and_wait_range() got the exact same implementation with the exception of the range being specified in *_range() Similar to other functions in fs.h which call *_range(..., 0, LLONG_MAX), change filemap_write_and_wait() to be a static inline which calls filemap_write_and_wait_range() Link: http://lkml.kernel.org/r/20191129160713.30892-1-ira.weiny@intel.comSigned-off-by:
Ira Weiny <ira.weiny@intel.com> Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Vlastimil Babka authored
Commit 76a1850e ("mm/debug.c: __dump_page() prints an extra line") inadvertently removed printing of page flags for pages that are neither anon nor ksm nor have a mapping. Fix that. Using pr_cont() again would be a solution, but the commit explicitly removed its use. Avoiding the danger of mixing up split lines from multiple CPUs might be beneficial for near-panic dumps like this, so fix this without reintroducing pr_cont(). Link: http://lkml.kernel.org/r/9f884d5c-ca60-dc7b-219c-c081c755fab6@suse.cz Fixes: 76a1850e ("mm/debug.c: __dump_page() prints an extra line") Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Reported-by:
Anshuman Khandual <anshuman.khandual@arm.com> Reported-by:
Michal Hocko <mhocko@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Qian Cai <cai@lca.pw> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
He Zhe authored
kmemleak_lock as a rwlock on RT can possibly be acquired in atomic context which does work. Since the kmemleak operation is performed in atomic context make it a raw_spinlock_t so it can also be acquired on RT. This is used for debugging and is not enabled by default in a production like environment (where performance/latency matters) so it makes sense to make it a raw_spinlock_t instead trying to get rid of the atomic context. Turn also the kmemleak_object->lock into raw_spinlock_t which is acquired (nested) while the kmemleak_lock is held. The time spent in "echo scan > kmemleak" slightly improved on 64core box with this patch applied after boot. [bigeasy@linutronix.de: redo the description, update comments. Merge the individual bits: He Zhe did the kmemleak_lock, Liu Haitao the ->lock and Yongxin Liu forwarded Liu's patch.] Link: http://lkml.kernel.org/r/20191219170834.4tah3prf2gdothz4@linutronix.de Link: https://lkml.kernel.org/r/20181218150744.GB20197@arrakis.emea.arm.com Link: https://lkml.kernel.org/r/1542877459-144382-1-git-send-email-zhe.he@windriver.com Link: https://lkml.kernel.org/r/20190927082230.34152-1-yongxin.liu@windriver.comSigned-off-by:
He Zhe <zhe.he@windriver.com> Signed-off-by:
Liu Haitao <haitao.liu@windriver.com> Signed-off-by:
Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Yu Zhao authored
If we are already under list_lock, don't call kmalloc(). Otherwise we will run into a deadlock because kmalloc() also tries to grab the same lock. Fix the problem by using a static bitmap instead. WARNING: possible recursive locking detected -------------------------------------------- mount-encrypted/4921 is trying to acquire lock: (&(&n->list_lock)->rlock){-.-.}, at: ___slab_alloc+0x104/0x437 but task is already holding lock: (&(&n->list_lock)->rlock){-.-.}, at: __kmem_cache_shutdown+0x81/0x3cb other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&n->list_lock)->rlock); lock(&(&n->list_lock)->rlock); *** DEADLOCK *** Link: http://lkml.kernel.org/r/20191108193958.205102-2-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
wangyan authored
For the uniform format, we use ocfs2_update_inode_fsync_trans() to access t_tid in handle->h_transaction Link: http://lkml.kernel.org/r/6ff9a312-5f7d-0e27-fb51-bc4e062fcd97@huawei.comSigned-off-by:
Yan Wang <wangyan122@huawei.com> Reviewed-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
wangyan authored
I found a NULL pointer dereference in ocfs2_update_inode_fsync_trans(), handle->h_transaction may be NULL in this situation: ocfs2_file_write_iter ->__generic_file_write_iter ->generic_perform_write ->ocfs2_write_begin ->ocfs2_write_begin_nolock ->ocfs2_write_cluster_by_desc ->ocfs2_write_cluster ->ocfs2_mark_extent_written ->ocfs2_change_extent_flag ->ocfs2_split_extent ->ocfs2_try_to_merge_extent ->ocfs2_extend_rotate_transaction ->ocfs2_extend_trans ->jbd2_journal_restart ->jbd2__journal_restart // handle->h_transaction is NULL here ->handle->h_transaction = NULL; ->start_this_handle /* journal aborted due to storage network disconnection, return error */ ->return -EROFS; /* line 3806 in ocfs2_try_to_merge_extent (), it will ignore ret error. */ ->ret = 0; ->... ->ocfs2_write_end ->ocfs2_write_end_nolock ->ocfs2_update_inode_fsync_trans // NULL pointer dereference ->oi->i_sync_tid = handle->h_transaction->t_tid; The information of NULL pointer dereference as follows: JBD2: Detected IO errors while flushing file data on dm-11-45 Aborting journal on device dm-11-45. JBD2: Error -5 detected when updating journal superblock for dm-11-45. (dd,22081,3):ocfs2_extend_trans:474 ERROR: status = -30 (dd,22081,3):ocfs2_try_to_merge_extent:3877 ERROR: status = -30 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000e74e1338 [0000000000000008] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Process dd (pid: 22081, stack limit = 0x00000000584f35a9) CPU: 3 PID: 22081 Comm: dd Kdump: loaded Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 0.98 08/25/2019 pstate: 60400009 (nZCv daif +PAN -UAO) pc : ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2] lr : ocfs2_write_end_nolock+0x2a0/0x550 [ocfs2] sp : ffff0000459fba70 x29: ffff0000459fba70 x28: 0000000000000000 x27: ffff807ccf7f1000 x26: 0000000000000001 x25: ffff807bdff57970 x24: ffff807caf1d4000 x23: ffff807cc79e9000 x22: 0000000000001000 x21: 000000006c6cd000 x20: ffff0000091d9000 x19: ffff807ccb239db0 x18: ffffffffffffffff x17: 000000000000000e x16: 0000000000000007 x15: ffff807c5e15bd78 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000001 x9 : 0000000000000228 x8 : 000000000000000c x7 : 0000000000000fff x6 : ffff807a308ed6b0 x5 : ffff7e01f10967c0 x4 : 0000000000000018 x3 : d0bc661572445600 x2 : 0000000000000000 x1 : 000000001b2e0200 x0 : 0000000000000000 Call trace: ocfs2_write_end_nolock+0x2b8/0x550 [ocfs2] ocfs2_write_end+0x4c/0x80 [ocfs2] generic_perform_write+0x108/0x1a8 __generic_file_write_iter+0x158/0x1c8 ocfs2_file_write_iter+0x668/0x950 [ocfs2] __vfs_write+0x11c/0x190 vfs_write+0xac/0x1c0 ksys_write+0x6c/0xd8 __arm64_sys_write+0x24/0x30 el0_svc_common+0x78/0x130 el0_svc_handler+0x38/0x78 el0_svc+0x8/0xc To prevent NULL pointer dereference in this situation, we use is_handle_aborted() before using handle->h_transaction->t_tid. Link: http://lkml.kernel.org/r/03e750ab-9ade-83aa-b000-b9e81e34e539@huawei.comSigned-off-by:
Yan Wang <wangyan122@huawei.com> Reviewed-by:
Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Shevchenko authored
There are users already and will be more of BITS_TO_BYTES() macro. Move it to bitops.h for wider use. In the case of ocfs2 the replacement is identical. As for bnx2x, there are two places where floor version is used. In the first case to calculate the amount of structures that can fit one memory page. In this case obviously the ceiling variant is correct and original code might have a potential bug, if amount of bits % 8 is not 0. In the second case the macro is used to calculate bytes transmitted in one microsecond. This will work for all speeds which is multiply of 1Gbps without any change, for the rest new code will give ceiling value, for instance 100Mbps will give 13 bytes, while old code gives 12 bytes and the arithmetically correct one is 12.5 bytes. Further the value is used to setup timer threshold which in any case has its own margins due to certain resolution. I don't see here an issue with slightly shifting thresholds for low speed connections, the card is supposed to utilize highest available rate, which is usually 10Gbps. Link: http://lkml.kernel.org/r/20200108121316.22411-1-andriy.shevchenko@linux.intel.comSigned-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by:
Sudarsana Reddy Kalluru <skalluru@marvell.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Colin Ian King authored
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses Coverity ("Unused value") Link: http://lkml.kernel.org/r/20191202164833.62865-1-colin.king@canonical.comSigned-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Masahiro Yamada authored
Gang He reports the failure of building fs/ocfs2/ as an external module of the kernel installed on the system: $ cd fs/ocfs2 $ make -C /lib/modules/`uname -r`/build M=`pwd` modules If you want to make it work reliably, I'd recommend to remove ccflags-y from the Makefiles, and to make header paths relative to the C files. I think this is the correct usage of the #include "..." directive. Link: http://lkml.kernel.org/r/20191227022950.14804-1-ghe@suse.comSigned-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
Gang He <ghe@suse.com> Reported-by:
Gang He <ghe@suse.com> Reviewed-by:
Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
zhengbin authored
Fixes coccicheck warnings: fs/ocfs2/cluster/quorum.c:76:2-3: Unneeded semicolon fs/ocfs2/dlmglue.c:573:2-3: Unneeded semicolon Link: http://lkml.kernel.org/r/6ee3aa16-9078-30b1-df3f-22064950bd98@linux.alibaba.comSigned-off-by:
zhengbin <zhengbin13@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Acked-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Aditya Pakki authored
In the only caller of dlm_migrate_lockres() - dlm_empty_lockres(), target is checked for O2NM_MAX_NODES. Thus, the assertion in dlm_migrate_lockres() is unnecessary and can be removed. The patch eliminates such a check. Link: http://lkml.kernel.org/r/20191218194111.26041-1-pakki001@umn.eduSigned-off-by:
Aditya Pakki <pakki001@umn.edu> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Luca Ceresoli authored
Add "issus" and correct it as "issues". Link: http://lkml.kernel.org/r/20200105221950.8384-1-luca@lucaceresoli.netSigned-off-by:
Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Xiong authored
Here are some of the common spelling mistakes and typos that I've found while fixing up spelling mistakes in the kernel. Most of them still exist in more than two source files. Link: http://lkml.kernel.org/r/20191229143626.51238-1-xndchn@gmail.comSigned-off-by:
Xiong <xndchn@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Yang Shi authored
Since commit a49bd4d7 ("mm, numa: rework do_pages_move"), the semantic of move_pages() has changed to return the number of non-migrated pages if they were result of a non-fatal reasons (usually a busy page). This was an unintentional change that hasn't been noticed except for LTP tests which checked for the documented behavior. There are two ways to go around this change. We can even get back to the original behavior and return -EAGAIN whenever migrate_pages is not able to migrate pages due to non-fatal reasons. Another option would be to simply continue with the changed semantic and extend move_pages documentation to clarify that -errno is returned on an invalid input or when migration simply cannot succeed (e.g. -ENOMEM, -EBUSY) or the number of pages that couldn't have been migrated due to ephemeral reasons (e.g. page is pinned or locked for other reasons). This patch implements the second option because this behavior is in place for some time without anybody complaining and possibly new users depending on it. Also it allows to have a slightly easier error handling as the caller knows that it is worth to retry when err > 0. But since the new semantic would be aborted immediately if migration is failed due to ephemeral reasons, need include the number of non-attempted pages in the return value too. Link: http://lkml.kernel.org/r/1580160527-109104-1-git-send-email-yang.shi@linux.alibaba.com Fixes: a49bd4d7 ("mm, numa: rework do_pages_move") Signed-off-by:
Yang Shi <yang.shi@linux.alibaba.com> Suggested-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Wei Yang <richardw.yang@linux.intel.com> Cc: <stable@vger.kernel.org> [4.17+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wei Yang authored
If compound is true, this means it is a PMD mapped THP. Which implies the page is not linked to any defer list. So the first code chunk will not be executed. Also with this reason, it would not be proper to add this page to a defer list. So the second code chunk is not correct. Based on this, we should remove the defer list related code. [yang.shi@linux.alibaba.com: better patch title] Link: http://lkml.kernel.org/r/20200117233836.3434-1-richardw.yang@linux.intel.com Fixes: 87eaceb3 ("mm: thp: make deferred split shrinker memcg aware") Signed-off-by:
Wei Yang <richardw.yang@linux.intel.com> Suggested-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Yang Shi <yang.shi@linux.alibaba.com> Cc: David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <stable@vger.kernel.org> [5.4+] Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Williams authored
The daxctl unit test for the dax_kmem driver currently triggers the (false positive) lockdep splat below. It results from the fact that remove_memory_block_devices() is invoked under the mem_hotplug_lock() causing lockdep entanglements with cpu_hotplug_lock() and sysfs (kernfs active state tracking). It is a false positive because the sysfs attribute path triggering the memory remove is not the same attribute path associated with memory-block device. sysfs_break_active_protection() is not applicable since there is no real deadlock conflict, instead move memory-block device removal outside the lock. The mem_hotplug_lock() is not needed to synchronize the memory-block device removal vs the page online state, that is already handled by lock_device_hotplug(). Specifically, lock_device_hotplug() is sufficient to allow try_remove_memory() to check the offline state of the memblocks and be assured that any in progress online attempts are flushed / blocked by kernfs_drain() / attribute removal. The add_memory() path safely creates memblock devices under the mem_hotplug_lock(). There is no kernfs active state synchronization in the memblock device_register() path, so nothing to fix there. This change is only possible thanks to the recent change that refactored memory block device removal out of arch_remove_memory() (commit 4c4b7f9b "mm/memory_hotplug: remove memory block devices before arch_remove_memory()"), and David's due diligence tracking down the guarantees afforded by kernfs_drain(). Not flagged for -stable since this only impacts ongoing development and lockdep validation, not a runtime issue. ====================================================== WARNING: possible circular locking dependency detected 5.5.0-rc3+ #230 Tainted: G OE ------------------------------------------------------ lt-daxctl/6459 is trying to acquire lock: ffff99c7f0003510 (kn->count#241){++++}, at: kernfs_remove_by_name_ns+0x41/0x80 but task is already holding lock: ffffffffa76a5450 (mem_hotplug_lock.rw_sem){++++}, at: percpu_down_write+0x20/0xe0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (mem_hotplug_lock.rw_sem){++++}: __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 get_online_mems+0x3e/0xb0 kmem_cache_create_usercopy+0x2e/0x260 kmem_cache_create+0x12/0x20 ptlock_cache_init+0x20/0x28 start_kernel+0x243/0x547 secondary_startup_64+0xb6/0xc0 -> #1 (cpu_hotplug_lock.rw_sem){++++}: __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 cpus_read_lock+0x3e/0xb0 online_pages+0x37/0x300 memory_subsys_online+0x17d/0x1c0 device_online+0x60/0x80 state_store+0x65/0xd0 kernfs_fop_write+0xcf/0x1c0 vfs_write+0xdb/0x1d0 ksys_write+0x65/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (kn->count#241){++++}: check_prev_add+0x98/0xa40 validate_chain+0x576/0x860 __lock_acquire+0x39c/0x790 lock_acquire+0xa2/0x1b0 __kernfs_remove+0x25f/0x2e0 kernfs_remove_by_name_ns+0x41/0x80 remove_files.isra.0+0x30/0x70 sysfs_remove_group+0x3d/0x80 sysfs_remove_groups+0x29/0x40 device_remove_attrs+0x39/0x70 device_del+0x16a/0x3f0 device_unregister+0x16/0x60 remove_memory_block_devices+0x82/0xb0 try_remove_memory+0xb5/0x130 remove_memory+0x26/0x40 dev_dax_kmem_remove+0x44/0x6a [kmem] device_release_driver_internal+0xe4/0x1c0 unbind_store+0xef/0x120 kernfs_fop_write+0xcf/0x1c0 vfs_write+0xdb/0x1d0 ksys_write+0x65/0xe0 do_syscall_64+0x5c/0xa0 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: kn->count#241 --> cpu_hotplug_lock.rw_sem --> mem_hotplug_lock.rw_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(mem_hotplug_lock.rw_sem); lock(cpu_hotplug_lock.rw_sem); lock(mem_hotplug_lock.rw_sem); lock(kn->count#241); *** DEADLOCK *** No fixes tag as this has been a long standing issue that predated the addition of kernfs lockdep annotations. Link: http://lkml.kernel.org/r/157991441887.2763922.4770790047389427325.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Wei Yang authored
If we get here after successfully adding page to list, err would be 1 to indicate the page is queued in the list. Current code has two problems: * on success, 0 is not returned * on error, if add_page_for_migratioin() return 1, and the following err1 from do_move_pages_to_node() is set, the err1 is not returned since err is 1 And these behaviors break the user interface. Link: http://lkml.kernel.org/r/20200119065753.21694-1-richardw.yang@linux.intel.com Fixes: e0153fc2 ("mm: move_pages: return valid node id in status if the page is already on the target node"). Signed-off-by:
Wei Yang <richardw.yang@linux.intel.com> Acked-by:
Yang Shi <yang.shi@linux.alibaba.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Pingfan Liu authored
After commit ba72b4c8 ("mm/sparsemem: support sub-section hotplug"), when a mem section is fully deactivated, section_mem_map still records the section's start pfn, which is not used any more and will be reassigned during re-addition. In analogy with alloc/free pattern, it is better to clear all fields of section_mem_map. Beside this, it breaks the user space tool "makedumpfile" [1], which makes assumption that a hot-removed section has mem_map as NULL, instead of checking directly against SECTION_MARKED_PRESENT bit. (makedumpfile will be better to change the assumption, and need a patch) The bug can be reproduced on IBM POWERVM by "drmgr -c mem -r -q 5" , trigger a crash, and save vmcore by makedumpfile [1]: makedumpfile, commit e73016540293 ("[v1.6.7] Update version") Link: http://lkml.kernel.org/r/1579487594-28889-1-git-send-email-kernelfans@gmail.comSigned-off-by:
Pingfan Liu <kernelfans@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
David Hildenbrand <david@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Baoquan He <bhe@redhat.com> Cc: Qian Cai <cai@lca.pw> Cc: Kazuhito Hagio <k-hagio@ab.jp.nec.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Dan Carpenter authored
What we are trying to do is change the '=' character to a NUL terminator and then at the end of the function we restore it back to an '='. The problem is there are two error paths where we jump to the end of the function before we have replaced the '=' with NUL. We end up putting the '=' in the wrong place (possibly one element before the start of the buffer). Link: http://lkml.kernel.org/r/20200115055426.vdjwvry44nfug7yy@kili.mountain Reported-by: syzbot+e64a13c5369a194d67df@syzkaller.appspotmail.com Fixes: 095f1fc4 ("mempolicy: rework shmem mpol parsing and display") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Dmitry Vyukov <dvyukov@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Theodore Ts'o authored
Without memcg, there is a one-to-one mapping between the bdi and bdi_writeback structures. In this world, things are fairly straightforward; the first thing bdi_unregister() does is to shutdown the bdi_writeback structure (or wb), and part of that writeback ensures that no other work queued against the wb, and that the wb is fully drained. With memcg, however, there is a one-to-many relationship between the bdi and bdi_writeback structures; that is, there are multiple wb objects which can all point to a single bdi. There is a refcount which prevents the bdi object from being released (and hence, unregistered). So in theory, the bdi_unregister() *should* only get called once its refcount goes to zero (bdi_put will drop the refcount, and when it is zero, release_bdi gets called, which calls bdi_unregister). Unfortunately, del_gendisk() in block/gen_hd.c never got the memo about the Brave New memcg World, and calls bdi_unregister directly. It does this without informing the file system, or the memcg code, or anything else. This causes the root wb associated with the bdi to be unregistered, but none of the memcg-specific wb's are shutdown. So when one of these wb's are woken up to do delayed work, they try to dereference their wb->bdi->dev to fetch the device name, but unfortunately bdi->dev is now NULL, thanks to the bdi_unregister() called by del_gendisk(). As a result, *boom*. Fortunately, it looks like the rest of the writeback path is perfectly happy with bdi->dev and bdi->owner being NULL, so the simplest fix is to create a bdi_dev_name() function which can handle bdi->dev being NULL. This also allows us to bulletproof the writeback tracepoints to prevent them from dereferencing a NULL pointer and crashing the kernel if one is tracing with memcg's enabled, and an iSCSI device dies or a USB storage stick is pulled. The most common way of triggering this will be hotremoval of a device while writeback with memcg enabled is going on. It was triggering several times a day in a heavily loaded production environment. Google Bug Id: 145475544 Link: https://lore.kernel.org/r/20191227194829.150110-1-tytso@mit.edu Link: http://lkml.kernel.org/r/20191228005211.163952-1-tytso@mit.eduSigned-off-by:
Theodore Ts'o <tytso@mit.edu> Cc: Chris Mason <clm@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andy Shevchenko authored
On 32-bit platform the size of long is only 32 bits which makes wrong offset in the array of 64 bit size. Calculate offset based on BITS_PER_LONG. Link: http://lkml.kernel.org/r/20200109103601.45929-1-andriy.shevchenko@linux.intel.com Fixes: 30544ed5 ("lib/bitmap: introduce bitmap_replace() helper") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Yury Norov <yury.norov@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 30 Jan, 2020 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull mmu_notifier updates from Jason Gunthorpe: "This small series revises the names in mmu_notifier to make the code clearer and more readable" * tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: mm/mmu_notifiers: Use 'interval_sub' as the variable for mmu_interval_notifier mm/mmu_notifiers: Use 'subscription' as the variable name for mmu_notifier mm/mmu_notifier: Rename struct mmu_notifier_mm to mmu_notifier_subscriptions
-
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linuxLinus Torvalds authored
Pull thread management updates from Christian Brauner: "Sargun Dhillon over the last cycle has worked on the pidfd_getfd() syscall. This syscall allows for the retrieval of file descriptors of a process based on its pidfd. A task needs to have ptrace_may_access() permissions with PTRACE_MODE_ATTACH_REALCREDS (suggested by Oleg and Andy) on the target. One of the main use-cases is in combination with seccomp's user notification feature. As a reminder, seccomp's user notification feature was made available in v5.0. It allows a task to retrieve a file descriptor for its seccomp filter. The file descriptor is usually handed of to a more privileged supervising process. The supervisor can then listen for syscall events caught by the seccomp filter of the supervisee and perform actions in lieu of the supervisee, usually emulating syscalls. pidfd_getfd() is needed to expand its uses. There are currently two major users that wait on pidfd_getfd() and one future user: - Netflix, Sargun said, is working on a service mesh where users should be able to connect to a dns-based VIP. When a user connects to e.g. 1.2.3.4:80 that runs e.g. service "foo" they will be redirected to an envoy process. This service mesh uses seccomp user notifications and pidfd to intercept all connect calls and instead of connecting them to 1.2.3.4:80 connects them to e.g. 127.0.0.1:8080. - LXD uses the seccomp notifier heavily to intercept and emulate mknod() and mount() syscalls for unprivileged containers/processes. With pidfd_getfd() more uses-cases e.g. bridging socket connections will be possible. - The patchset has also seen some interest from the browser corner. Right now, Firefox is using a SECCOMP_RET_TRAP sandbox managed by a broker process. In the future glibc will start blocking all signals during dlopen() rendering this type of sandbox impossible. Hence, in the future Firefox will switch to a seccomp-user-nofication based sandbox which also makes use of file descriptor retrieval. The thread for this can be found at https://sourceware.org/ml/libc-alpha/2019-12/msg00079.html With pidfd_getfd() it is e.g. possible to bridge socket connections for the supervisee (binding to a privileged port) and taking actions on file descriptors on behalf of the supervisee in general. Sargun's first version was using an ioctl on pidfds but various people pushed for it to be a proper syscall which he duely implemented as well over various review cycles. Selftests are of course included. I've also added instructions how to deal with merge conflicts below. There's also a small fix coming from the kernel mentee project to correctly annotate struct sighand_struct with __rcu to fix various sparse warnings. We've received a few more such fixes and even though they are mostly trivial I've decided to postpone them until after -rc1 since they came in rather late and I don't want to risk introducing build warnings. Finally, there's a new prctl() command PR_{G,S}ET_IO_FLUSHER which is needed to avoid allocation recursions triggerable by storage drivers that have userspace parts that run in the IO path (e.g. dm-multipath, iscsi, etc). These allocation recursions deadlock the device. The new prctl() allows such privileged userspace components to avoid allocation recursions by setting the PF_MEMALLOC_NOIO and PF_LESS_THROTTLE flags. The patch carries the necessary acks from the relevant maintainers and is routed here as part of prctl() thread-management." * tag 'threads-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux: prctl: PR_{G,S}ET_IO_FLUSHER to support controlling memory reclaim sched.h: Annotate sighand_struct with __rcu test: Add test for pidfd getfd arch: wire up pidfd_getfd syscall pid: Implement pidfd_getfd syscall vfs, fdtable: Add fget_task helper
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring updates from Jens Axboe: - Support for various new opcodes (fallocate, openat, close, statx, fadvise, madvise, openat2, non-vectored read/write, send/recv, and epoll_ctl) - Faster ring quiesce for fileset updates - Optimizations for overflow condition checking - Support for max-sized clamping - Support for probing what opcodes are supported - Support for io-wq backend sharing between "sibling" rings - Support for registering personalities - Lots of little fixes and improvements * tag 'for-5.6/io_uring-vfs-2020-01-29' of git://git.kernel.dk/linux-block: (64 commits) io_uring: add support for epoll_ctl(2) eventpoll: support non-blocking do_epoll_ctl() calls eventpoll: abstract out epoll_ctl() handler io_uring: fix linked command file table usage io_uring: support using a registered personality for commands io_uring: allow registering credentials io_uring: add io-wq workqueue sharing io-wq: allow grabbing existing io-wq io_uring/io-wq: don't use static creds/mm assignments io-wq: make the io_wq ref counted io_uring: fix refcounting with batched allocations at OOM io_uring: add comment for drain_next io_uring: don't attempt to copy iovec for READ/WRITE io_uring: honor IOSQE_ASYNC for linked reqs io_uring: prep req when do IOSQE_ASYNC io_uring: use labeled array init in io_op_defs io_uring: optimise sqe-to-req flags translation io_uring: remove REQ_F_IO_DRAINED io_uring: file switch work needs to get flushed on exit io_uring: hide uring_fd in ctx ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI updates from James Bottomley: "This series is slightly unusual because it includes Arnd's compat ioctl tree here: 1c46a2cf Merge tag 'block-ioctl-cleanup-5.6' into 5.6/scsi-queue Excluding Arnd's changes, this is mostly an update of the usual drivers: megaraid_sas, mpt3sas, qla2xxx, ufs, lpfc, hisi_sas. There are a couple of core and base updates around error propagation and atomicity in the attribute container base we use for the SCSI transport classes. The rest is minor changes and updates" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (149 commits) scsi: hisi_sas: Rename hisi_sas_cq.pci_irq_mask scsi: hisi_sas: Add prints for v3 hw interrupt converge and automatic affinity scsi: hisi_sas: Modify the file permissions of trigger_dump to write only scsi: hisi_sas: Replace magic number when handle channel interrupt scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock scsi: hisi_sas: use threaded irq to process CQ interrupts scsi: ufs: Use UFS device indicated maximum LU number scsi: ufs: Add max_lu_supported in struct ufs_dev_info scsi: ufs: Delete is_init_prefetch from struct ufs_hba scsi: ufs: Inline two functions into their callers scsi: ufs: Move ufshcd_get_max_pwr_mode() to ufshcd_device_params_init() scsi: ufs: Split ufshcd_probe_hba() based on its called flow scsi: ufs: Delete struct ufs_dev_desc scsi: ufs: Fix ufshcd_probe_hba() reture value in case ufshcd_scsi_add_wlus() fails scsi: ufs-mediatek: enable low-power mode for hibern8 state scsi: ufs: export some functions for vendor usage scsi: ufs-mediatek: add dbg_register_dump implementation scsi: qla2xxx: Fix a NULL pointer dereference in an error path scsi: qla1280: Make checking for 64bit support consistent scsi: megaraid_sas: Update driver version to 07.713.01.00-rc1 ...
-
Linus Torvalds authored
Merge tag 'for-5.6/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Fix DM core's potential for q->make_request_fn NULL pointer in the unlikely case that a DM device is created without a DM table and then accessed due to upper-layer userspace code or user error. - Fix DM thin-provisioning's metadata_pre_commit_callback to not use memory after it is free'd. Also refactor code to disallow changing the thin-pool's data device once in use -- doing so guarantees smae lifetime of pool's data device relative to the pool metadata. - Fix DM space maps used by DM thinp and DM cache to avoid reuse of a already used block. This race was identified with extremely heavy snapshot use in the context of DM thin provisioning. - Fix DM raid's table status relative to an active rebuild. - Fix DM crypt to use GFP_NOIO rather than GFP_NOFS in call to skcipher_request_alloc(). Also fix benbi IV constructor crash if used in authenticated mode. - Add DM crypt support for Elephant diffuser to allow for Bitlocker compatibility. - Fix DM verity target to not prefetch hash blocks for data that has already been verified. - Fix DM writecache's incorrect flush sequence during commit when in SSD mode. - Improve DM writecache's sequential write performance on SSDs. - Add DM zoned target support for zone sizes smaller than 128MiB. - Add DM multipath 'queue_if_no_path_timeout_secs' module param to allow timeout if path isn't reinstated. This allows users a kernel safety-net against IO hanging indefinitely, due to no active paths, that has historically only been provided by multipathd userspace. - Various DM code cleanups to use true/false rather than 1/0, a variable rename in dm-dust, and fix for a math error in comment for DM thin metadata's ondisk format. * tag 'for-5.6/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (21 commits) dm: fix potential for q->make_request_fn NULL pointer dm writecache: improve performance of large linear writes on SSDs dm mpath: Add timeout mechanism for queue_if_no_path dm thin: change data device's flush_bio to be member of struct pool dm thin: don't allow changing data device during thin-pool reload dm thin: fix use-after-free in metadata_pre_commit_callback dm thin metadata: use pool locking at end of dm_pool_metadata_close dm writecache: fix incorrect flush sequence when doing SSD mode commit dm crypt: fix benbi IV constructor crash if used in authenticated mode dm crypt: Implement Elephant diffuser for Bitlocker compatibility dm space map common: fix to ensure new block isn't already in use dm verity: don't prefetch hash blocks for already-verified data dm crypt: fix GFP flags passed to skcipher_request_alloc() dm thin metadata: Fix trivial math error in on-disk format documentation dm thin metadata: use true/false for bool variable dm snapshot: use true/false for bool variable dm bio prison v2: use true/false for bool variable dm mpath: use true/false for bool variable dm zoned: support zone sizes smaller than 128MiB dm raid: table line rebuild status fixes ...
-
- 29 Jan, 2020 8 commits
-
-
git://git.lwn.net/linuxLinus Torvalds authored
Pull documentation updates from Jonathan Corbet: "It has been a relatively quiet cycle for documentation, but there's still a couple of things of note: - Conversion of the NFS documentation to RST - A new document on how to help with documentation (and a maintainer profile entry too) Plus the usual collection of typo fixes, etc" * tag 'docs-5.6' of git://git.lwn.net/linux: (40 commits) docs: filesystems: add overlayfs to index.rst docs: usb: remove some broken references scripts/find-unused-docs: Fix massive false positives docs: nvdimm: use ReST notation for subsection zram: correct documentation about sysfs node of huge page writeback Documentation: zram: various fixes in zram.rst Add a maintainer entry profile for documentation Add a document on how to contribute to the documentation docs: Keep up with the location of NoUri Documentation: Call out example SYM_FUNC_* usage as x86-specific Documentation: nfs: fault_injection: convert to ReST Documentation: nfs: pnfs-scsi-server: convert to ReST Documentation: nfs: convert pnfs-block-server to ReST Documentation: nfs: idmapper: convert to ReST Documentation: convert nfsd-admin-interfaces to ReST Documentation: nfs-rdma: convert to ReST Documentation: nfsroot.rst: COSMETIC: refill a paragraph Documentation: nfsroot.txt: convert to ReST Documentation: convert nfs.txt to ReST Documentation: filesystems: convert vfat.txt to RST ...
-
Linus Torvalds authored
Merge tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest kunit updates from Shuah Khan: "This kunit update consists of: - Support for building kunit as a module from Alan Maguire - AppArmor KUnit tests for policy unpack from Mike Salvatore" * tag 'linux-kselftest-5.6-rc1-kunit' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: building kunit as a module breaks allmodconfig kunit: update documentation to describe module-based build kunit: allow kunit to be loaded as a module kunit: remove timeout dependence on sysctl_hung_task_timeout_seconds kunit: allow kunit tests to be loaded as a module kunit: hide unexported try-catch interface in try-catch-impl.h kunit: move string-stream.h to lib/kunit apparmor: add AppArmor KUnit tests for policy unpack
-
Linus Torvalds authored
Merge tag 'linux-kselftest-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest update from Shuah Khan: "This Kselftest update consists of several fixes to framework and individual tests. In addition, it enables LKDTM tests adding lkdtm target to kselftest Makefile" * tag 'linux-kselftest-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/ftrace: fix glob selftest selftests: settings: tests can be in subsubdirs kselftest: Minimise dependency of get_size on C library interfaces selftests/livepatch: Remove unused local variable in set_ftrace_enabled() selftests/livepatch: Replace set_dynamic_debug() with setup_config() in README selftests/lkdtm: Add tests for LKDTM targets selftests: Uninitialized variable in test_cgcore_proc_migration() selftests: fix build behaviour on targets' failures
-
Linus Torvalds authored
Merge tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull y2038 updates from Arnd Bergmann: "Core, driver and file system changes These are updates to device drivers and file systems that for some reason or another were not included in the kernel in the previous y2038 series. I've gone through all users of time_t again to make sure the kernel is in a long-term maintainable state, replacing all remaining references to time_t with safe alternatives. Some related parts of the series were picked up into the nfsd, xfs, alsa and v4l2 trees. A final set of patches in linux-mm removes the now unused time_t/timeval/timespec types and helper functions after all five branches are merged for linux-5.6, ensuring that no new users get merged. As a result, linux-5.6, or my backport of the patches to 5.4 [1], should be the first release that can serve as a base for a 32-bit system designed to run beyond year 2038, with a few remaining caveats: - All user space must be compiled with a 64-bit time_t, which will be supported in the coming musl-1.2 and glibc-2.32 releases, along with installed kernel headers from linux-5.6 or higher. - Applications that use the system call interfaces directly need to be ported to use the time64 syscalls added in linux-5.1 in place of the existing system calls. This impacts most users of futex() and seccomp() as well as programming languages that have their own runtime environment not based on libc. - Applications that use a private copy of kernel uapi header files or their contents may need to update to the linux-5.6 version, in particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h, linux/elfcore.h, linux/sockios.h, linux/timex.h and linux/can/bcm.h. - A few remaining interfaces cannot be changed to pass a 64-bit time_t in a compatible way, so they must be configured to use CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit timestamps. Most importantly this impacts all users of 'struct input_event'. - All y2038 problems that are present on 64-bit machines also apply to 32-bit machines. In particular this affects file systems with on-disk timestamps using signed 32-bit seconds: ext4 with ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs" [1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame * tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits) Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC" y2038: sh: remove timeval/timespec usage from headers y2038: sparc: remove use of struct timex y2038: rename itimerval to __kernel_old_itimerval y2038: remove obsolete jiffies conversion functions nfs: fscache: use timespec64 in inode auxdata nfs: fix timstamp debug prints nfs: use time64_t internally sunrpc: convert to time64_t for expiry drm/etnaviv: avoid deprecated timespec drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC drm/msm: avoid using 'timespec' hfs/hfsplus: use 64-bit inode timestamps hostfs: pass 64-bit timestamps to/from user space packet: clarify timestamp overflow tsacct: add 64-bit btime field acct: stop using get_seconds() um: ubd: use 64-bit time_t where possible xtensa: ISS: avoid struct timeval dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printkLinus Torvalds authored
Pull printk update from Petr Mladek: "Prevent replaying log on all consoles" * tag 'printk-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: printk: fix exclusive_console replaying
-
Jens Axboe authored
This adds IORING_OP_EPOLL_CTL, which can perform the same work as the epoll_ctl(2) system call. Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
Also make it available outside of epoll, along with the helper that decides if we need to copy the passed in epoll_event. Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
No functional changes in this patch. Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-