- 11 Aug, 2022 17 commits
-
-
Xuan Zhuo authored
There is currently only one place to reference __vring_new_virtqueue() directly from the outside of virtio core. And here vring_new_virtqueue() can be used instead. Subsequent patches will modify __vring_new_virtqueue, so stop it as an export symbol for now. Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Acked-by:
Jason Wang <jasowang@redhat.com> Message-Id: <20220801063902.129329-8-xuanzhuo@linux.alibaba.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com>
-
Xuan Zhuo authored
Separate the logic of virtqueue initialization. These variables should be reset during reset. This logic can be called independently when implementing resize/reset later. Signed-off-by:
-
Xuan Zhuo authored
Separate the two inline structures(split and packed) from the structure vring_virtqueue. In this way, we can use these two structures later to pass parameters and retain temporary variables. Signed-off-by:
-
Xuan Zhuo authored
Introduce vring_free() to free the vring of vq. Subsequent patches will use vring_free() alone. Signed-off-by:
-
Xuan Zhuo authored
Added documentation for virtqueue_detach_unused_buf, allowing it to be called on queue reset. Signed-off-by:
-
Xuan Zhuo authored
reset can be divided into the following four steps (example): 1. transport: notify the device to reset the queue 2. vring: recycle the buffer submitted 3. vring: reset/resize the vring (may re-alloc) 4. transport: mmap vring to device, and enable the queue In order to support queue reset, add two callbacks in struct virtio_config_ops to implement steps 1 and 4. Signed-off-by:
-
Xuan Zhuo authored
virtio-net can display the maximum (supported by hardware) ring size in ethtool -g eth0. When the subsequent patch implements vring reset, it can judge whether the ring size passed by the driver is legal based on this. Signed-off-by:
-
David Hildenbrand authored
Let's make it clearer that simply unlocking CONFIG_VIRTIO_MEM on an architecture is most probably not sufficient to have it working as expected. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Gavin Shan <gshan@redhat.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Message-Id: <20220610094737.65254-1-david@redhat.com> Signed-off-by:
-
Minghao Xue authored
According to virtio_mmio wakeup flag in device trees, set its IRQ as wakeup source in virtqueue initialization. Signed-off-by:
Minghao Xue <quic_mingxue@quicinc.com> Message-Id: <1654851507-13891-3-git-send-email-quic_mingxue@quicinc.com> Signed-off-by:
-
Minghao Xue authored
Some systems want to set the interrupt of virtio_mmio device as a wakeup source. On such systems, we'll use the existence of the "wakeup-source" property as a signal of requirement. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Message-Id: <1654851507-13891-2-git-send-email-quic_mingxue@quicinc.com> Signed-off-by:
-
Robin Murphy authored
Use the new interface to check the capability for our device specifically. Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Message-Id: <548e316fa282ce513fabb991a4c4d92258062eb5.1654688822.git.robin.murphy@arm.com> Signed-off-by:
-
Michael S. Tsirkin authored
This option doesn't really work and breaks too many drivers. Not yet sure what's the right thing to do, for now let's make sure randconfig isn't broken by this. Fixes: c346dae4 ("virtio: disable notification hardening by default") Cc: "Jason Wang" <jasowang@redhat.com> Signed-off-by:
-
Jason Wang authored
The NVDIMM region could be available before the virtio_device_ready() that is called by virtio_dev_probe(). This means the driver tries to use device before DRIVER_OK which violates the spec, fixing this by set device ready before the nvdimm_pmem_region_create(). Note that this means the virtio_pmem_host_ack() could be triggered before the creation of the nd region, this is safe since the pmem_lock has been initialized and whether or not any available buffer is added before is validated by virtio_pmem_host_ack(). Fixes 6e84200c ("virtio-pmem: Add virtio pmem driver") Acked-by:
Pankaj Gupta <pankaj.gupta@amd.com> Signed-off-by:
-
Jason Wang authored
We used to initialize the provider_data manually after nvdimm_pemm_region_create(). This seems to be racy if the flush is issued before the initialization of provider_data[1]. Fixing this by initializing the provider_data through nd_region_desc to make sure the provider_data is ready after the pmem is created. [1]: [ 80.152281] nd_pmem namespace0.0: unable to guarantee persistence of writes [ 92.393956] BUG: kernel NULL pointer dereference, address: 0000000000000318 [ 92.394551] #PF: supervisor read access in kernel mode [ 92.394955] #PF: error_code(0x0000) - not-present page [ 92.395365] PGD 0 P4D 0 [ 92.395566] Oops: 0000 [#1] PREEMPT SMP PTI [ 92.395867] CPU: 2 PID: 506 Comm: mkfs.ext4 Not tainted 5.19.0-rc1+ #453 [ 92.396365] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 [ 92.397178] RIP: 0010:virtio_pmem_flush+0x2f/0x1f0 [ 92.397521] Code: 55 41 54 55 53 48 81 ec a0 00 00 00 65 48 8b 04 25 28 00 00 00 48 89 84 24 98 00 00 00 31 c0 48 8b 87 78 03 00 00 48 89 04 24 <48> 8b 98 18 03 00 00 e8 85 bf 6b 00 ba 58 00 00 00 be c0 0c 00 00 [ 92.398982] RSP: 0018:ffff9a7380aefc88 EFLAGS: 00010246 [ 92.399349] RAX: 0000000000000000 RBX: ffff8e77c3f86f00 RCX: 0000000000000000 [ 92.399833] RDX: ffffffffad4ea720 RSI: ffff8e77c41e39c0 RDI: ffff8e77c41c5c00 [ 92.400388] RBP: ffff8e77c41e39c0 R08: ffff8e77c19f0600 R09: 0000000000000000 [ 92.400874] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8e77c0814e28 [ 92.401364] R13: 0000000000000000 R14: 0000000000000000 R15: ffff8e77c41e39c0 [ 92.401849] FS: 00007f3cd75b2780(0000) GS:ffff8e7937d00000(0000) knlGS:0000000000000000 [ 92.402423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 92.402821] CR2: 0000000000000318 CR3: 0000000103c80002 CR4: 0000000000370ee0 [ 92.403307] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 92.403793] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 92.404278] Call Trace: [ 92.404481] <TASK> [ 92.404654] ? mempool_alloc+0x5d/0x160 [ 92.404939] ? terminate_walk+0x5f/0xf0 [ 92.405226] ? bio_alloc_bioset+0xbb/0x3f0 [ 92.405525] async_pmem_flush+0x17/0x80 [ 92.405806] nvdimm_flush+0x11/0x30 [ 92.406067] pmem_submit_bio+0x1e9/0x200 [ 92.406354] __submit_bio+0x80/0x120 [ 92.406621] submit_bio_noacct_nocheck+0xdc/0x2a0 [ 92.406958] submit_bio_wait+0x4e/0x80 [ 92.407234] blkdev_issue_flush+0x31/0x50 [ 92.407526] ? punt_bios_to_rescuer+0x230/0x230 [ 92.407852] blkdev_fsync+0x1e/0x30 [ 92.408112] do_fsync+0x33/0x70 [ 92.408354] __x64_sys_fsync+0xb/0x10 [ 92.408625] do_syscall_64+0x43/0x90 [ 92.408895] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 92.409257] RIP: 0033:0x7f3cd76c6c44 Fixes 6e84200c ("virtio-pmem: Add virtio pmem driver") Acked-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Stefano Garzarella authored
iotlb_translate() can return -ENOBUFS if the bio_vec is not big enough to contain all the ranges for translation. This can happen for example if the VMM maps a large bounce buffer, without using hugepages, that requires more than 16 ranges to translate the addresses. To handle this case, let's extend iotlb_translate() to also return the number of bytes successfully translated. In copy_from_iotlb()/copy_to_iotlb() loops by calling iotlb_translate() several times until we complete the translation. Signed-off-by:
Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20220624075656.13997-1-sgarzare@redhat.com> Signed-off-by:
-
Xuan Zhuo authored
The parameter vq of vring_alloc_desc_extra() is useless. This patch removes this parameter. Subsequent patches will call this function to avoid passing useless arguments. Signed-off-by:
-
Xuan Zhuo authored
Rename the member len in the structure rpoc_vring to num. And remove 'in bytes' from the comment of it. This is misleading. Because this actually refers to the size of the virtio vring to be created. The unit is not bytes. Signed-off-by:
-
- 31 Jul, 2022 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "One-liner fix of a NULL pointer deref in the Allwinner clk driver" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: Fix H6 RTC clock definition
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Update the 'mitigations=' kernel param documentation - Check the IBPB feature flag before enabling IBPB in firmware calls because cloud vendors' fantasy when it comes to creating guest configurations is unlimited - Unexport sev_es_ghcb_hv_call() before 5.19 releases now that HyperV doesn't need it anymore - Remove dead CONFIG_* items * tag 'x86_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: docs/kernel-parameters: Update descriptions for "mitigations=" param with retbleed x86/bugs: Do not enable IBPB at firmware entry when IBPB is not available Revert "x86/sev: Expose sev_es_ghcb_hv_call() for use by HyperV" x86/configs: Update configs in x86_debug.config
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fix from Borislav Petkov: - Avoid rwsem lockups in certain situations when handling the handoff bit * tag 'locking_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/rwsem: Allow slowpath writer to ignore handoff bit if not set by first waiter
-
git://git.kernel.org/pub/scm/linux/kernel/git/ras/rasLinus Torvalds authored
Pull EDAC fixes from Borislav Petkov: - Relax the condition under which the DIMM label in ghes_edac is set in order to accomodate an HPE BIOS which sets only the device but not the bank - Two forgotten fixes to synopsys_edac when handling error interrupts * tag 'edac_urgent_for_v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ghes: Set the DIMM label unconditionally EDAC/synopsys: Re-enable the error interrupts on v3 hw EDAC/synopsys: Use the correct register to disable the error interrupt on v3 hw
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Last set of ARM fixes for 5.19: - fix for MAX_DMA_ADDRESS overflow - fix for find_*_bit performing an out of bounds memory access" * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: findbit: fix overflowing offset ARM: 9216/1: Fix MAX_DMA_ADDRESS overflow
-
- 30 Jul, 2022 2 commits
-
-
Waiman Long authored
With commit d257cc8c ("locking/rwsem: Make handoff bit handling more consistent"), the writer that sets the handoff bit can be interrupted out without clearing the bit if the wait queue isn't empty. This disables reader and writer optimistic lock spinning and stealing. Now if a non-first writer in the queue is somehow woken up or a new waiter enters the slowpath, it can't acquire the lock. This is not the case before commit d257cc8c as the writer that set the handoff bit will clear it when exiting out via the out_nolock path. This is less efficient as the busy rwsem stays in an unlock state for a longer time. In some cases, this new behavior may cause lockups as shown in [1] and [2]. This patch allows a non-first writer to ignore the handoff bit if it is not originally set or initiated by the first waiter. This patch is shown to be effective in fixing the lockup problem reported in [1]. [1] https://lore.kernel.org/lkml/20220617134325.GC30825@techsingularity.net/ [2] https://lore.kernel.org/lkml/3f02975c-1a9d-be20-32cf-f1d8e3dfafcc@oracle.com/ Fixes: d257cc8c ("locking/rwsem: Make handoff bit handling more consistent") Signed-off-by:
Waiman Long <longman@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by:
John Donnelly <john.p.donnelly@oracle.com> Tested-by:
Mel Gorman <mgorman@techsingularity.net> Link: https://lore.kernel.org/r/20220622200419.778799-1-longman@redhat.com
-
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mmLinus Torvalds authored
Pull misc fixes from Andrew Morton: "Two hotfixes, both cc:stable" * tag 'mm-hotfixes-stable-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm/hmm: fault non-owner device private entries page_alloc: fix invalid watermark check on a negative value
-
- 29 Jul, 2022 15 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fix from Jens Axboe: "Just a single fix for NVMe, yet another quirk addition" * tag 'block-5.19-2022-07-29' of git://git.kernel.dk/linux-block: nvme-pci: Crucial P2 has bogus namespace ids
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull more drm fixes from Dave Airlie: "Maxime had the dog^Wmailing list server eat his homework^Wmisc pull request. Two more small fixes, one in nouveau svm code and the other in simpledrm. nouveau: - page migration fix simpledrm: - fix mode_valid return value" * tag 'drm-fixes-2022-07-30' of git://anongit.freedesktop.org/drm/drm: nouveau/svm: Fix to migrate all requested pages drm/simpledrm: Fix return type of simpledrm_simple_display_pipe_mode_valid()
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
One fix to fix simpledrm mode_valid return value, and one for page migration in nouveau Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220729094514.sfzhc3gqjgwgal62@penduick
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Four fixes, three in drivers. The two biggest fixes are ufs and the remaining driver and core fix are small and obvious (and the core fix is low risk)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: core: Fix a race condition related to device management scsi: core: Fix warning in scsi_alloc_sgtables() scsi: ufs: host: Hold reference returned by of_parse_phandle() scsi: mpt3sas: Stop fw fault watchdog work item during system shutdown
-
Eiichi Tsukata authored
Updates descriptions for "mitigations=off" and "mitigations=auto,nosmt" with the respective retbleed= settings. Signed-off-by:
Eiichi Tsukata <eiichi.tsukata@nutanix.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: corbet@lwn.net Link: https://lore.kernel.org/r/20220728043907.165688-1-eiichi.tsukata@nutanix.com
-
Ralph Campbell authored
If hmm_range_fault() is called with the HMM_PFN_REQ_FAULT flag and a device private PTE is found, the hmm_range::dev_private_owner page is used to determine if the device private page should not be faulted in. However, if the device private page is not owned by the caller, hmm_range_fault() returns an error instead of calling migrate_to_ram() to fault in the page. For example, if a page is migrated to GPU private memory and a RDMA fault capable NIC tries to read the migrated page, without this patch it will get an error. With this patch, the page will be migrated back to system memory and the NIC will be able to read the data. Link: https://lkml.kernel.org/r/20220727000837.4128709-2-rcampbell@nvidia.com Link: https://lkml.kernel.org/r/20220725183615.4118795-2-rcampbell@nvidia.com Fixes: 08ddddda ("mm/hmm: check the device private page owner in hmm_range_fault()") Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Reported-by:
Felix Kuehling <felix.kuehling@amd.com> Reviewed-by:
Alistair Popple <apopple@nvidia.com> Cc: Philip Yang <Philip.Yang@amd.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Jaewon Kim authored
There was a report that a task is waiting at the throttle_direct_reclaim. The pgscan_direct_throttle in vmstat was increasing. This is a bug where zone_watermark_fast returns true even when the free is very low. The commit f27ce0e1 ("page_alloc: consider highatomic reserve in watermark fast") changed the watermark fast to consider highatomic reserve. But it did not handle a negative value case which can be happened when reserved_highatomic pageblock is bigger than the actual free. If watermark is considered as ok for the negative value, allocating contexts for order-0 will consume all free pages without direct reclaim, and finally free page may become depleted except highatomic free. Then allocating contexts may fall into throttle_direct_reclaim. This symptom may easily happen in a system where wmark min is low and other reclaimers like kswapd does not make free pages quickly. Handle the negative case by using MIN. Link: https://lkml.kernel.org/r/20220725095212.25388-1-jaewon31.kim@samsung.com Fixes: f27ce0e1 ("page_alloc: consider highatomic reserve in watermark fast") Signed-off-by:
Jaewon Kim <jaewon31.kim@samsung.com> Reported-by:
GyeongHwan Hong <gh21.hong@samsung.com> Acked-by:
-
Linus Torvalds authored
Merge tag 'perf-tools-fixes-for-v5.19-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix addresses for bss symbols, describing variables used in resolving data access in tools such as 'perf c2c' and 'perf mem'. - Skip symbols if SHF_ALLOC flag is not set, a technique used for listing deprecated symbols, its addresses are zeros, so not useful. - Remove undefined behavior from bpf_perf_object__next() when dealing with an empty bpf_objects_list list. - Make a ARM CoreSight disasm script work with both python2 and python3. - Sync x86's cpufeatures header with with the kernel sources. * tag 'perf-tools-fixes-for-v5.19-2022-07-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf bpf: Remove undefined behavior from bpf_perf_object__next() perf symbol: Skip symbols if SHF_ALLOC flag is not set perf symbol: Correct address for bss symbols perf scripts python: Let script to be python2 compliant tools headers cpufeatures: Sync with the kernel sources
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds authored
Pull workqueue fix from Tejun Heo: "Just one commit to suppress a spurious warning added during the 5.19 cycle" * tag 'wq-for-5.19-rc8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Avoid a false warning in unbind_workers()
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fix from Rafael Wysocki: "Make some false positive RCU splats resulting from a recent intel_idle driver change go away (Waiman Long)" * tag 'pm-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: intel_idle: Fix false positive RCU splats due to incorrect hardirqs state
-
Lai Jiangshan authored
Doing set_cpus_allowed_ptr() with wq_unbound_cpumask can be possible fails and trigger the false warning. Use cpu_possible_mask instead when wq_unbound_cpumask has no active CPUs. It is very easy to trigger the warning: Set wq_unbound_cpumask to a small set of CPUs. Offline all the CPUs of wq_unbound_cpumask. Offline an extra CPU and trigger the warning. Fixes: 10a5a651 ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs") Signed-off-by:
Lai Jiangshan <jiangshan.ljs@antgroup.com> Signed-off-by:
Tejun Heo <tj@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "A build fix for 'make vdso_install' that avoids an issue trying to install the compat VDSO" * tag 'riscv-for-linus-5.19-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: compat: vdso: Fix vdso_install target
-
Linus Torvalds authored
Merge tag 'loongarch-fixes-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: - Fix cache size calculation, stack protection attributes, ptrace's fpr_set and "ROM Size" in boardinfo - Some cleanups and improvements of assembly - Some cleanups of unused code and useless code * tag 'loongarch-fixes-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Fix wrong "ROM Size" of boardinfo LoongArch: Fix missing fcsr in ptrace's fpr_set LoongArch: Fix shared cache size calculation LoongArch: Disable executable stack by default LoongArch: Remove unused variables LoongArch: Remove clock setting during cpu hotplug stage LoongArch: Remove useless header compiler.h LoongArch: Remove several syntactic sugar macros for branches LoongArch: Re-tab the assembly files LoongArch: Simplify "BGT foo, zero" with BGTZ LoongArch: Simplify "BLT foo, zero" with BLTZ LoongArch: Simplify "BEQ/BNE foo, zero" with BEQZ/BNEZ LoongArch: Use the "move" pseudo-instruction where applicable LoongArch: Use the "jr" pseudo-instruction where applicable LoongArch: Use ABI names of registers where appropriate
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Re-enable the new amdgpu display engine for powerpc, as long as the compiler is correctly configured. - Disable stack variable initialisation in prom_init to fix GCC 12 allmodconfig. Thanks to Dan Horák and Sudip Mukherjee. * tag 'powerpc-5.19-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: drm/amdgpu: Re-enable DCN for 64-bit powerpc powerpc/64s: Disable stack variable initialisation for prom_init
-
Tiezhu Yang authored
We can see the "ROM Size" is different in the following outputs: [root@linux loongson]# cat /sys/firmware/loongson/boardinfo BIOS Information Vendor : Loongson Version : vUDK2018-LoongArch-V2.0.pre-beta8 ROM Size : 63 KB Release Date : 06/15/2022 Board Information Manufacturer : Loongson Board Name : Loongson-LS3A5000-7A1000-1w-A2101 Family : LOONGSON64 [root@linux loongson]# dmidecode | head -11 ... Handle 0x0000, DMI type 0, 26 bytes BIOS Information Vendor: Loongson Version: vUDK2018-LoongArch-V2.0.pre-beta8 Release Date: 06/15/2022 ROM Size: 4 MB According to "BIOS Information (Type 0) structure" in the SMBIOS Reference Specification [1], it shows 64K * (n+1) is the size of the physical device containing the BIOS if the size is less than 16M. Additionally, we can see the related code in dmidecode [2]: u64 s = { .l = (code1 + 1) << 6 }; So the output of dmidecode is correct, the output of boardinfo is wrong, fix it. By the way, at present no need to consider the size is 16M or greater on LoongArch, because it is usually 4M or 8M which is enough to use. [1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.6.0.pdf [2] https://git.savannah.nongnu.org/cgit/dmidecode.git/tree/dmidecode.c#n347 Fixes: 628c3bb4 ("LoongArch: Add boot and setup routines") Reviewed-by:WANG Xuerui <git@xen0n.name> Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
Huacai Chen <chenhuacai@loongson.cn>
-
