For EG20T and ML7213 IOH, the i2c controller numbers are fixed, using
fixed bus number will make it much easier for platform code to use
i2c_register_board_info() to register i2c devices.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

* 'x86/rdrand' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  random: Adjust the number of loops when initializing
  random: Use arch-specific RNG to initialize the entropy store

* 'x86-syscall-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Move <asm/asm-offsets.h> from trace_syscalls.c to asm/syscall.h
  x86, um: Fix typo in 32-bit system call modifications
  um: Use $(srctree) not $(KBUILD_SRC)
  x86, um: Mark system call tables readonly
  x86, um: Use the same style generated syscall tables as native
  um: Generate headers before generating user-offsets.s
  um: Run host archheaders, allow use of host generated headers
  kbuild, headers.sh: Don't make archheaders explicitly
  x86, syscall: Allow syscall offset to be symbolic
  x86, syscall: Re-fix typo in comment
  x86: Simplify syscallhdr.sh
  x86: Generate system call tables and unistd_*.h from tables
  checksyscalls: Use arch/x86/syscalls/syscall_32.tbl as source
  x86: Machine-readable syscall tables and scripts to process them
  trace: Include <asm/asm-offsets.h> in trace_syscalls.c
  x86-64, ia32: Move compat_ni_syscall into C and its own file
  x86-64, syscall: Adjust comment spacing and remove typo
  kbuild: Add support for an "archheaders" target
  kbuild: Add support for installing generated asm headers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Add INGORE_ERRORS to ignore warnings in boot up
  ktest: Still do reboot even for REBOOT_TYPE = script
  ktest: Fix compare script to test if options are not documented
  ktest: Detect typos in option names
  ktest: Have all values be set by defaults
  ktest: Change initialization of defaults hash to perl format
  ktest: Add options SWITCH_TO_GOOD and SWITCH_TO_TEST
  ktest: Allow overriding bisect test results
  ktest: Evaluate options before processing them
  ktest: Evaluate $KERNEL_VERSION in both install and post install
  ktest: Only ask options needed for install
  ktest: When creating a new config, ask for BUILD_OPTIONS
  ktest: Do not ask for some options if the only test is build
  ktest: Ask for type of test when creating a new config
  ktest: Allow bisect test to restart where it left off
  ktest: When creating new config, allow the use of ${THIS_DIR}
  ktest: Add default for ssh-user, build-target and target-image
  ktest: Allow success logs to be stored
  ktest: Save test output

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  ARM: OMAP3: fix build on !CONFIG_IOMMU_API

When suspending, there was a large list of warnings going something like:

	Device 'machinecheck1' does not have a release() function, it is broken and must be fixed

This patch turns the static mce_devices into dynamically allocated, and
properly frees them when they are removed from the system.  It solves
the warning messages on my laptop here.
Reported-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Djalal Harouni <tixxdz@opendz.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@amd64.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'fixes' of git://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-arm:
  ARM: sa11x0: assabet: fix build warning
  ARM: Add arm_memblock_steal() to allocate memory away from the kernel
  ARM: 7275/1: LPAE: Check the CPU support for the long descriptor format
  ARM: 7274/1: NUC900: Rename nuc900-audio platform device to nuc900-ac97
  ARM: 7272/1: S3C24XX: Fix build error for missing <mach/system-reset.h>
  ARM: 7271/1: Fix typo in conversion of ARCH_NR_GPIOS to Kconfig

NFS client bugfixes and cleanups for Linux 3.3 (pull 2)

* tag 'nfs-for-3.3-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  pnfsblock: alloc short extent before submit bio
  pnfsblock: remove rpc_call_ops from struct parallel_io
  pnfsblock: move find lock page logic out of bl_write_pagelist
  pnfsblock: cleanup bl_mark_sectors_init
  pnfsblock: limit bio page count
  pnfsblock: don't spinlock when freeing block_dev
  pnfsblock: clean up _add_entry
  pnfsblock: set read/write tk_status to pnfs_error
  pnfsblock: acquire im_lock in _preload_range
  NFS4: fix compile warnings in nfs4proc.c
  nfs: check for integer overflow in decode_devicenotify_args()
  NFS: cleanup endian type in decode_ds_addr()
  NFS: add an endian notation

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (sysfs-interface) Update tempX_type attribute to be more generic
  hwmon: (adm1031) Fix coding style issues
  hwmon: (it87) Add IT8728F support
  hwmon: (coretemp) Add missing section annotations
  hwmon: (lm90) Add range check to set_update_interval
  hwmon: (lm63) Support extended lookup table of LM96163
  hwmon: (lm63) Expose automatic fan speed control lookup table
  hwmon: (lm63) Fix incorrect comment about I2C address
  hwmon: (lm63) LM64 has a dedicated pin for tachometer
  hwmon: (lm63) Add sensor type attribute for external sensor on LM96163
  hwmon: (lm63) Add support for update_interval sysfs attribute
  hwmon: (lm63) Add support for writing the external critical temperature
  hwmon: (lm63) Add support for unsigned upper temperature limits
  hwmon: (lm63) Add support for LM96163
  hwmon: (lm63) Add support for external temperature offset register
  hwmon: (lm63) Fix checkpatch errors
  hwmon: (max1111) Change sysfs interface to in[0-3]_input in millivolts

* 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Hibernate: Drop the check of swap space size for compressed image
  PM / shmobile: fix A3SP suspend method
  PM / Domains: Skip governor functions for CONFIG_PM_RUNTIME unset
  PM / Domains: Fix build for CONFIG_PM_SLEEP unset
  PM: Make sysrq-o be available for CONFIG_PM unset

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/coccinelle: improve the coverage of some semantic patches
  coccinelle: semantic patches related to devm_ functions (part 2)
  coccinelle: semantic patches related to devm_ functions (part 1)
  coccinelle.txt: update documentation to include M= option
  coccicheck: add M= option to control which dir is processed
  ctags: remove struct forward declarations
  scripts/tags.sh: Add Page flag function magic

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  menuconfig: fix a regression when canceling the prompt dialog at exit
  kbuild: Fix compiler warning with assertion when calling 'fwrite'
  Improve update-po-config output
  menuconfig: let make not report error when not save configuration
  merge_config.sh: fix bug in final check
  merge_config.sh: whitespace cleanup
  merge_config.sh: use signal names compatible with dash and bash
  kconfig: add merge_config.sh script
  kconfig: use xfwrite wrapper function to silence warnings
  kconfig: fix set but not used warnings
  kconfig: fix warnings by specifing format arguments

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Kbuild: Use dtc's -d (dependency) option
  dtc: Implement -d option to write out a dependency file
  kbuild: Fix comment in Makefile.lib
  scripts/genksyms: clean lex/yacc generated files
  kbuild: Correctly deal with make options which contain an "s"

Since a32618d2 (ARM: pgtable: switch to use pgtable-nopud.h), assabet
warns as follows:

arch/arm/mach-sa1100/assabet.c: In function 'map_sa1100_gpio_regs':
arch/arm/mach-sa1100/assabet.c:264: warning: passing argument 1 of 'pmd_offset' from incompatible pointer type

Fix this by adding the necessary pud_offset() macro.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The temp[1-*]_type attribute reports the temperature sensor type. Sensor type 1
is described as "PII/Celeron Diode", which is quite restrictive; other CPUs
may also have an embedded temperature sensor diode with similar characteristics.
Change description to "CPU embedded diode" to be more generic.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Fix almost all coding style issues except for the multi-line macro errors,
which do not really apply since the macros are not multi-line statements
but declarations.

Based on merged patch series from Zac Storer; fixed remaining checkpatch
errors and warnings.

Cc: Zac Storer <zac.3.14159@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Until we get a datasheet for the IT8728F, treat it as fully compatible
with the IT8721F, as it seems to work reasonably well.

This closes kernel bug #27262.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

Many functions in the coretemp driver lack a proper section
annotation. Add them to let the kernel free the memory after
initialization when possible.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Durgadoss R <durgadoss.r@intel.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>

When writing the update_interval attribute, the parameter value was
not range checked, which could cause an integer overflow and result
in an arbitrary update interval. Fix by limiting the value range to
<0, 100000>.
Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The LM96163 has an extended lookup table with 12 entries instead of 8,
add support for that.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

The LM63 and compatible devices have a lookup table to control the fan
speed automatically. Expose it in sysfs. Values are cached for 5
seconds, independently of the other register values to avoid slowing
down "sensors". We might make the table values writable in the future.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

What was true of the LM63 doesn't apply to the LM64.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

On the LM64, the tachometer function has a dedicated pin and fan speed
monitoring is always enabled.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

On LM96163, the external temperature sensor type is configurable to
either a thermal diode or a 3904 transistor. The chip reports a wrong
temperature if misconfigured. Add writable attribute to support it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

The update interval is configurable on LM63 and compatibles. Add
support for it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

On LM64, the external critical temperature limit is always writable. On LM96163,
it is writable if the chip is configured for it. Add conditional support for
writing the register dependent on chip type and configuration.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

LM96163 supports unsigned upper limits for the external temperature sensor.
Add support for it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

LM96163 is an enhanced version of LM63 with improved PWM resolution. Add chip
detection code as well as support for improved PWM resolution if the chip is
configured to use it.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

LM63 and compatibles support a temperature offset register for the external
temperature sensor. Add support for it.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

This patch fixed the inconsistent max1111 sysfs interface as pointed
out by Jean Delvare:

    It was pointed to me that the max1111 driver doesn't implement the
    standard sysfs interface for hwmon drivers (as described in
    Documentation/hwmon/sysfs-interface). It exports files adc[0-3]_in,
    which
    aren't part of the standard interface. Presumably these should be
    renamed to in[0-3]_input. Renaming them is probably not sufficient
    though, as I see no scaling done in the driver. As the MAX1111 chip has
    a documented full scale of 2.048V, I take it that the LSB of the ADC
    has a weight of 8 mV. Exporting raw register values to user-space is
    not OK.
Reported-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

When we are initializing using arch_get_random_long() we only need to
loop enough times to touch all the bytes in the buffer; using
poolwords for that does twice the number of operations necessary on a
64-bit machine, since in the random number generator code "word" means
32 bits.
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Link: http://lkml.kernel.org/r/1324589281-31931-1-git-send-email-tytso@mit.edu

If there is an architecture-specific random number generator (such as
RDRAND for Intel architectures), use it to initialize /dev/random's
entropy stores.  Even in the worst case, if RDRAND is something like
AES(NSA_KEY, counter++), it won't hurt, and it will definitely help
against any other adversaries.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Link: http://lkml.kernel.org/r/1324589281-31931-1-git-send-email-tytso@mit.eduSigned-off-by: H. Peter Anvin <hpa@linux.intel.com>

This commit fixes a bug, while introducing a new one..

commit 7203ddbd4be9720649e47d756a001e0c7d7f8ae2
Author: Wang YanQing <udknight@gmail.com>
Date:   Thu Jan 12 11:31:32 2012 +0800

    menuconfig: let make not report error when not save configuration

Pressing ESC should cancel the yes/no dialog and return back to
the main menu, but not exit from menuconfig.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

omap3isp depends on CONFIG_IOMMU_API, so avoid registering its
device (and defining its configuration structs) on !CONFIG_IOMMU_API.

This is generally nice to have, but more importantly, it fixes:

arch/arm/plat-omap/include/plat/iommu.h: In function 'dev_to_omap_iommu':
arch/arm/plat-omap/include/plat/iommu.h:135: error: 'struct
dev_archdata' has no member named 'iommu'
arch/arm/mach-omap2/devices.c: In function 'omap3_init_camera':
arch/arm/mach-omap2/devices.c:222: error: 'struct dev_archdata' has no
member named 'iommu'
make[1]: *** [arch/arm/mach-omap2/devices.o] Error 1
make: *** [arch/arm/mach-omap2] Error 2

Which happens because while setting up the omap3isp device we try
to access the (now nonexistent) iommu member of dev_archdata.

Compile tested with omap2plus_defconfig on today's:

commit e343a895
Merge: 06792c4d 193a667f
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Tue Jan 10 18:04:27 2012 -0800

    Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostReported-by: Govindraj Raja <govindraj.raja@ti.com>
Reported-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Joerg Roedel <Joerg.Roedel@amd.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

Recent changes to kernel/module.c caused the following compile
error:

  kernel/module.c: In function ‘show_taint’:
  kernel/module.c:1024:2: error: implicit declaration of function ‘module_flags_taint’ [-Werror=implicit-function-declaration]
  cc1: some warnings being treated as errors

Correct this error by moving the definition of module_flags_taint
outside of the #ifdef CONFIG_MODULE_UNLOAD section.
Signed-off-by: Kevin Winchester <kjwinchester@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (655 commits)
  [media] revert patch: HDIC HD29L2 DMB-TH USB2.0 reference design driver
  mb86a20s: Add a few more register settings at the init seq
  mb86a20s: Group registers into the same line
  [media] [PATCH] don't reset the delivery system on DTV_CLEAR
  [media] [BUG] it913x-fe fix typo error making SNR levels unstable
  [media] cx23885: Query the CX25840 during enum_input for status
  [media] cx25840: Add support for g_input_status
  [media] rc-videomate-m1f.c Rename to match remote controler name
  [media] drivers: media: au0828: Fix dependency for VIDEO_AU0828
  [media] convert drivers/media/* to use module_platform_driver()
  [media] drivers: video: cx231xx: Fix dependency for VIDEO_CX231XX_DVB
  [media] Exynos4 JPEG codec v4l2 driver
  [media] doc: v4l: selection: choose pixels as units for selection rectangles
  [media] v4l: s5p-tv: mixer: fix setup of VP scaling
  [media] v4l: s5p-tv: mixer: add support for selection API
  [media] v4l: emulate old crop API using extended crop/compose API
  [media] doc: v4l: add documentation for selection API
  [media] doc: v4l: add binary images for selection API
  [media] v4l: add support for selection api
  [media] hd29l2: fix review findings
  ...

* 'for-3.3/drivers' of git://git.kernel.dk/linux-block:
  mtip32xx: do rebuild monitoring asynchronously
  xen-blkfront: Use kcalloc instead of kzalloc to allocate array
  mtip32xx: uninitialized variable in mtip_quiesce_io()
  mtip32xx: updates based on feedback
  xen-blkback: convert hole punching to discard request on loop devices
  xen/blkback: Move processing of BLKIF_OP_DISCARD from dispatch_rw_block_io
  xen/blk[front|back]: Enhance discard support with secure erasing support.
  xen/blk[front|back]: Squash blkif_request_rw and blkif_request_discard together
  mtip32xx: update to new ->make_request() API
  mtip32xx: add module.h include to avoid conflict with moduleh tree
  mtip32xx: mark a few more items static
  mtip32xx: ensure that all local functions are static
  mtip32xx: cleanup compat ioctl handling
  mtip32xx: fix warnings/errors on 32-bit compiles
  block: Add driver for Micron RealSSD pcie flash cards

* 'for-3.3/core' of git://git.kernel.dk/linux-block: (37 commits)
  Revert "block: recursive merge requests"
  block: Stop using macro stubs for the bio data integrity calls
  blockdev: convert some macros to static inlines
  fs: remove unneeded plug in mpage_readpages()
  block: Add BLKROTATIONAL ioctl
  block: Introduce blk_set_stacking_limits function
  block: remove WARN_ON_ONCE() in exit_io_context()
  block: an exiting task should be allowed to create io_context
  block: ioc_cgroup_changed() needs to be exported
  block: recursive merge requests
  block, cfq: fix empty queue crash caused by request merge
  block, cfq: move icq creation and rq->elv.icq association to block core
  block, cfq: restructure io_cq creation path for io_context interface cleanup
  block, cfq: move io_cq exit/release to blk-ioc.c
  block, cfq: move icq cache management to block core
  block, cfq: move io_cq lookup to blk-ioc.c
  block, cfq: move cfqd->icq_list to request_queue and add request->elv.icq
  block, cfq: reorganize cfq_io_context into generic and cfq specific parts
  block: remove elevator_queue->ops
  block: reorder elevator switch sequence
  ...

Fix up conflicts in:
 - block/blk-cgroup.c
	Switch from can_attach_task to can_attach
 - block/cfq-iosched.c
	conflict with now removed cic index changes (we now use q->id instead)

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  perf tools: Fix compile error on x86_64 Ubuntu
  perf report: Fix --stdio output alignment when --showcpuutilization used
  perf annotate: Get rid of field_sep check
  perf annotate: Fix usage string
  perf kmem: Fix a memory leak
  perf kmem: Add missing closedir() calls
  perf top: Add error message for EMFILE
  perf test: Change type of '-v' option to INCR
  perf script: Add missing closedir() calls
  tracing: Fix compile error when static ftrace is enabled
  recordmcount: Fix handling of elf64 big-endian objects.
  perf tools: Add const.h to MANIFEST to make perf-tar-src-pkg work again
  perf tools: Add support for guest/host-only profiling
  perf kvm: Do guest-only counting by default
  perf top: Don't update total_period on process_sample
  perf hists: Stop using 'self' for struct hist_entry
  perf hists: Rename total_session to total_period
  x86: Add counter when debug stack is used with interrupts enabled
  x86: Allow NMIs to hit breakpoints in i386
  x86: Keep current stack in NMI breakpoints
  ...