IA64 is the only architecture which does not consider the pgoff value when
searching for a possible free memory region with vm_unmapped_area().
Adding this seems to have no negative side effect on IA64, so add it now
to make IA64 consistent with all other architectures.

Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Helge Deller <deller@gmx.de>
Tested-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-ia64@vger.kernel.org
Link: https://lore.kernel.org/r/20230721152432.196382-3-deller@gmx.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

The io_uring testcase is broken on IA-64 since commit d808459b
("io_uring: Adjust mapping wrt architecture aliasing requirements").

The reason is, that this commit introduced an own architecture
independend get_unmapped_area() search algorithm which finds on IA-64 a
memory region which is outside of the regular memory region used for
shared userspace mappings and which can't be used on that platform
due to aliasing.

To avoid similar problems on IA-64 and other platforms in the future,
it's better to switch back to the architecture-provided
get_unmapped_area() function and adjust the needed input parameters
before the call. Beside fixing the issue, the function now becomes
easier to understand and maintain.

This patch has been successfully tested with the io_uring testcase on
physical x86-64, ppc64le, IA-64 and PA-RISC machines. On PA-RISC the LTP
mmmap testcases did not report any regressions.

Cc: stable@vger.kernel.org # 6.4
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: matoro <matoro_mailinglist_kernel@matoro.tk>
Fixes: d808459b ("io_uring: Adjust mapping wrt architecture aliasing requirements")
Link: https://lore.kernel.org/r/20230721152432.196382-2-deller@gmx.deSigned-off-by: Jens Axboe <axboe@kernel.dk>

io-wq assumes that an issue is blocking, but it may not be if the
request type has asked for a non-blocking attempt. If we get
-EAGAIN for that case, then we need to treat it as a final result
and not retry or arm poll for it.

Cc: stable@vger.kernel.org # 5.10+
Link: https://github.com/axboe/liburing/issues/897Signed-off-by: Jens Axboe <axboe@kernel.dk>

The check being unconditional may lead to unwanted denials reported by
LSMs when a process has the capability granted by DAC, but denied by an
LSM. In the case of SELinux such denials are a problem, since they can't
be effectively filtered out via the policy and when not silenced, they
produce noise that may hide a true problem or an attack.

Since not having the capability merely means that the created io_uring
context will be accounted against the current user's RLIMIT_MEMLOCK
limit, we can disable auditing of denials for this check by using
ns_capable_noaudit() instead of capable().

Fixes: 2b188cc1 ("Add io_uring IO interface")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2193317Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/20230718115607.65652-1-omosnace@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

I observed poor performance of io_uring compared to synchronous IO. That
turns out to be caused by deeper CPU idle states entered with io_uring,
due to io_uring using plain schedule(), whereas synchronous IO uses
io_schedule().

The losses due to this are substantial. On my cascade lake workstation,
t/io_uring from the fio repository e.g. yields regressions between 20%
and 40% with the following command:
./t/io_uring -r 5 -X0 -d 1 -s 1 -c 1 -p 0 -S$use_sync -R 0 /mnt/t2/fio/write.0.0

This is repeatable with different filesystems, using raw block devices
and using different block devices.

Use io_schedule_prepare() / io_schedule_finish() in
io_cqring_wait_schedule() to address the difference.

After that using io_uring is on par or surpassing synchronous IO (using
registered files etc makes it reliably win, but arguably is a less fair
comparison).

There are other calls to schedule() in io_uring/, but none immediately
jump out to be similarly situated, so I did not touch them. Similarly,
it's possible that mutex_lock_io() should be used, but it's not clear if
there are cases where that matters.

Cc: stable@vger.kernel.org # 5.10+
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: io-uring@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andres Freund <andres@anarazel.de>
Link: https://lore.kernel.org/r/20230707162007.194068-1-andres@anarazel.de
[axboe: minor style fixup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

io_uring offloads task_work for cancelation purposes when the task is
exiting. This is conceptually fine, but we should be nicer and actually
wait for that work to complete before returning.

Add an argument to io_fallback_tw() telling it to flush the deferred
work when it's all queued up, and have it flush a ctx behind whenever
the ctx changes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

It's used just one function higher up, get rid of the declaration and
just move it up a bit.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

struct msghdr->msg_inq is a signed type, yet we attempt to store what
is essentially an unsigned bitmask in there. We only really need to know
if the field was stored or not, but let's use the proper type to avoid
any misunderstandings on what is being attempted here.

Link: https://lore.kernel.org/io-uring/CAHk-=wjKb24aSe6fE4zDH-eh8hr-FB9BbukObUVSMGOrsBHCRQ@mail.gmail.com/Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'tag-chrome-platform-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
 "Improvements:

   - Support Pin Assignment D in getting mux state

   - Emit an uevent when EC panics so that userland programs get chance
     to capture EC coredumps (LPC interface only)

   - Send EC_CMD_HOST_SLEEP_EVENT to EC at the very beginning/end of
     system suspend/resume so that EC can watch the duration more
     accurately (LPC interface only)

  Misc:

   - Switch back from I2C .probe_new() to .probe()

   - Use %*ph for printing hexdump of small buffers"

* tag 'tag-chrome-platform-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_spi: Use %*ph for printing hexdump of a small buffer
  platform/chrome: Switch i2c drivers back to use .probe()
  platform/chrome: cros_ec_lpc: Move host command to prepare/complete
  platform/chrome: cros_ec: Report EC panic as uevent
  platform/chrome: cros_typec_switch: Add Pin D support

Pull thermal control updates from Rafael Wysocki:
 "These extend the int340x thermal driver, add thermal DT bindings for
  some Qcom platforms, add DT bindings and support for Armada AP807 and
  MSM8909, allow selecting the bang-bang thermal governor as the default
  one, address issues in several thermal drivers for ARM platforms and
  clean up code.

  Specifics:

   - Add new IOCTLs to the int340x thermal driver to allow user space to
     retrieve the Passive v2 thermal table (Srinivas Pandruvada)

   - Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms
     (Konrad Dybcio)

   - Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)

   - Add DT bindings for QCom ipq9574 (Praveenkumar I)

   - Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)

   - Allow selecting the bang-bang governor as default (Thierry Reding)

   - Refactor and prepare the code to set the scene for RCar Gen4
     (Wolfram Sang)

   - Clean up and fix the QCom tsens drivers. Add DT bindings and
     calibration for the MSM8909 platform (Stephan Gerhold)

   - Revert a patch introducing a wrong usage of devm_of_iomap() on the
     Mediatek platform (Ricardo Cañuelo)

   - Fix the clock vs reset ordering in order to conform to the
     documentation on the sun8i (Christophe JAILLET)

   - Prevent setting up undocumented registers, enable the only
     described sensors and add the version 2.1 on the Qoriq sensor (Peng
     Fan)

   - Add DT bindings and support for the Armada AP807 (Alex Leibovich)

   - Update the mlx5 driver with the recent thermal changes (Daniel
     Lezcano)

   - Convert to platform remove callback returning void on STM32 (Uwe
     Kleine-König)

   - Add an error information printing for devm_thermal_add_hwmon_sysfs()
     and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
     Qoriq, Mediateka and QCom (Yangtao Li)

   - Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)

   - Use the dev_err_probe() function in the QCom tsens alarm driver
     (Luca Weiss)"

* tag 'thermal-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits)
  thermal/drivers/qcom/temp-alarm: Use dev_err_probe
  thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
  thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()
  thermal/drivers/qcom: Remove redundant msg at probe time
  thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()
  thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()
  thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()
  drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
  thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
  thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()
  thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
  thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
  thermal/drivers/stm32: Convert to platform remove callback returning void
  net/mlx5: Update the driver with the recent thermal changes
  thermal/drivers/armada: Add support for AP807 thermal data
  dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
  thermal/drivers/qoriq: Support version 2.1
  thermal/drivers/qoriq: Only enable supported sensors
  thermal/drivers/qoriq: No need to program site adjustment register
  thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors
  ...

Pull power management updates from Rafael Wysocki:
 "These add Intel TPMI (Topology Aware Register and PM Capsule
  Interface) support to the power capping subsystem, extend the
  intel_idle driver to work in VM guests where MWAIT is not available,
  extend the system-wide power management diagnostics, fix bugs and
  clean up code.

  Specifics:

   - Introduce power capping core support for Intel TPMI (Topology Aware
     Register and PM Capsule Interface) and a TPMI interface driver for
     Intel RAPL (Zhang Rui, Dan Carpenter)

   - Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping
     driver (Zhang Rui)

   - Fix invalid initialization for pl4_supported field in the Intel
     RAPL power capping driver (Sumeet Pawnikar)

   - Clean up the intel_idle driver, make it work with VM guests that
     cannot use the MWAIT instruction and address the case in which the
     host may enter a deep idle state when the guest is idle (Arjan van
     de Ven)

   - Prevent cpufreq drivers that provide the ->adjust_perf() callback
     without a ->fast_switch() one which is used as a fallback from the
     former in some cases (Wyes Karny)

   - Fix some issues related to the AMD P-state cpufreq driver (Mario
     Limonciello, Wyes Karny)

   - Fix the energy_performance_preference attribute handling in the
     intel_pstate driver in passive mode (Tero Kristo)

   - Fix the handling of pm_suspend_target_state when CONFIG_PM is unset
     (Kai-Heng Feng)

   - Correct spelling mistake in a comment in the hibernation code (Wang
     Honghui)

   - Add arch_resume_nosmt() prototype to avoid a "missing prototypes"
     build warning (Arnd Bergmann)

   - Restrict pm_pr_dbg() to system-wide power transitions and use it in
     a few additional places (Mario Limonciello)

   - Drop verification of in-params from genpd_add_device() and ensure
     that all of its callers will do it (Ulf Hansson)

   - Prevent possible integer overflows from occurring in
     genpd_parse_state() (Nikita Zhandarovich)

   - Reorder fieldls in 'struct devfreq_dev_status' to reduce its size
     somewhat (Christophe JAILLET)

   - Ensure that the Exynos PPMU driver is already loaded before the
     Exynos Bus driver starts probing so as to avoid a possible freeze
     loading of the kernel modules (Marek Szyprowski)

   - Fix variable deferencing before NULL check in the mtk-cci devfreq
     driver (Sukrut Bellary)"

* tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits)
  intel_idle: Add a "Long HLT" C1 state for the VM guest mode
  cpufreq: intel_pstate: Fix energy_performance_preference for passive
  cpufreq: amd-pstate: Add a kernel config option to set default mode
  cpufreq: amd-pstate: Set a fallback policy based on preferred_profile
  ACPI: CPPC: Add definition for undefined FADT preferred PM profile value
  cpufreq: amd-pstate: Set default governor to schedutil
  PM: domains: Move the verification of in-params from genpd_add_device()
  cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated
  cpufreq: amd-pstate: Write CPPC enable bit per-socket
  intel_idle: Add support for using intel_idle in a VM guest using just hlt
  cpufreq: Fail driver register if it has adjust_perf without fast_switch
  intel_idle: clean up the (new) state_update_enter_method function
  intel_idle: refactor state->enter manipulation into its own function
  platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages
  pinctrl: amd: Use pm_pr_dbg to show debugging messages
  ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking
  include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume
  powercap: RAPL: Fix a NULL vs IS_ERR() bug
  powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
  powercap: RAPL: fix invalid initialization for pl4_supported field
  ...

Pull ACPI updates from Rafael Wysocki:
 "These rework the handling of notifications in ACPI button drivers (to
  enable future simplifications and cleanups), clean up the ACPI thermal
  driver, update the ACPI backlight driver, add quirks working around
  AML bugs on some systems, fix some assorted issues and clean up code.

  Specifics:

   - Reduce ACPI device enumeration overhead related to devices with
     dependencies (Rafael Wysocki)

   - Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario
     Limonciello)

   - Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd
     Bergmann)

   - Drop several ACPI resource management quirks related to IRQ
     ovverides on AMD "Zen" systems (Mario Limonciello)

   - Modify the ACPI EC driver to make it only clear the EC GPE status
     when handling the GPE (Jeremy Compostella)

   - Add quirks to work around ACPI tables defects on Lenovo Yoga Book
     yb1-x90f/l and Nextbook Ares 8A (Hans de Goede)

   - Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad
     X131e (3371 AMD version) and Apple iMac11,3 and stop trying to use
     vendor backlight control on relatively recent systems (Hans de
     Goede)

   - Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the
     ACPI LPSS (Intel SoC) driver (Hans de Goede)

   - Add nfit_intel_shutdown_status() declaration to a local header to
     avoid a "missing prototypes" build warning (Arnd Bergmann)

   - Clean up the ACPI thermal driver and drop some dead or otherwise
     unneded code from it (Rafael Wysocki)

   - Rework the handling of notifications in the ACPI button drivers so
     as to allow the common notification handling code for devices to be
     simplified (Rafael Wysocki)

   - Make ghes_get_devices() return NULL to indicate that there are no
     GHES devices so as to allow vendor-specific EDAC drivers to probe
     then (Li Yang)

   - Mark bert_disable() as __initdata and drop an unused function from
     the APEI GHES code (Miaohe Lin)

   - Make the ACPI PAD (Processor Aggregator Device) driver realize that
     Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc)

   - Drop the certainly unnecessary and likely incorrect inclusion of
     linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla)"

* tag 'acpi-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
  ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569
  ACPI: thermal: Drop struct acpi_thermal_flags
  ACPI: thermal: Drop struct acpi_thermal_state
  ACPI: bus: Simplify installation and removal of notify callback
  ACPI: tiny-power-button: Eliminate the driver notify callback
  ACPI: button: Use different notify handlers for lid and buttons
  ACPI: button: Eliminate the driver notify callback
  ACPI: thermal: Eliminate struct acpi_thermal_state_flags
  ACPI: thermal: Move acpi_thermal_driver definition
  ACPI: thermal: Move symbol definitions to one place
  ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol
  ACPI: thermal: Use BIT() macro for defining flags
  APEI: GHES: correctly return NULL for ghes_get_devices()
  ACPI: FFH: Drop the inclusion of linux/arm-smccc.h
  ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly
  ACPI: APEI: mark bert_disable as __initdata
  ACPI: EC: Clear GPE on interrupt handling only
  ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012
  ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence
  ACPI: resource: Remove "Zen" specific match and quirks
  ...

Pull arm64 updates from Catalin Marinas:
 "Notable features are user-space support for the memcpy/memset
  instructions and the permission indirection extension.

   - Support for the Armv8.9 Permission Indirection Extensions. While
     this feature doesn't add new functionality, it enables future
     support for Guarded Control Stacks (GCS) and Permission Overlays

   - User-space support for the Armv8.8 memcpy/memset instructions

   - arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
     identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
     cleanups

   - Removal of superfluous ISBs on context switch (following
     retrospective architecture tightening)

   - Decode the ISS2 register during faults for additional information
     to help with debugging

   - KPTI clean-up/simplification of the trampoline exit code

   - Addressing several -Wmissing-prototype warnings

   - Kselftest improvements for signal handling and ptrace

   - Fix TPIDR2_EL0 restoring on sigreturn

   - Clean-up, robustness improvements of the module allocation code

   - More sysreg conversions to the automatic register/bitfields
     generation

   - CPU capabilities handling cleanup

   - Arm documentation updates: ACPI, ptdump"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
  kselftest/arm64: Add a test case for TPIDR2 restore
  arm64/signal: Restore TPIDR2 register rather than memory state
  arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
  Documentation/arm64: Add ptdump documentation
  arm64: hibernate: remove WARN_ON in save_processor_state
  kselftest/arm64: Log signal code and address for unexpected signals
  docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
  arm64/fpsimd: Exit streaming mode when flushing tasks
  docs: perf: Add new description for HiSilicon UC PMU
  drivers/perf: hisi: Add support for HiSilicon UC PMU driver
  drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
  perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
  perf/arm-cmn: Add sysfs identifier
  perf/arm-cmn: Revamp model detection
  perf/arm_dmc620: Add cpumask
  arm64: mm: fix VA-range sanity check
  arm64/mm: remove now-superfluous ISBs from TTBR writes
  Documentation/arm64: Update ACPI tables from BBR
  Documentation/arm64: Update references in arm-acpi
  Documentation/arm64: Update ARM and arch reference
  ...

Pull ARM updates from Russell King:

 - lots of build cleanups from Arnd spread throughout the arch/arm tree

 - replace strlcpy() with the preferred strscpy()

 - use sign_extend32() in the module linker

 - drop handle_irq() machine descriptor method

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9315/1: fiq: include asm/mach/irq.h for prototypes
  ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.h
  ARM: 9313/1: vdso: add missing prototypes
  ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.c
  ARM: 9311/1: decompressor: move function prototypes to misc.h
  ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototype
  ARM: 9309/1: add missing syscall prototypes
  ARM: 9308/1: move setup functions to header
  ARM: 9307/1: nommu: include asm/idmap.h
  ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warning
  ARM: 9305/1: add clear/copy_user_highpage declarations
  ARM: 9304/1: add prototype for function called only from asm
  ARM: 9303/1: kprobes: avoid missing-declaration warnings
  ARM: 9302/1: traps: hide unused functions on NOMMU
  ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup function
  ARM: 9300/1: Replace all non-returning strlcpy with strscpy
  ARM: 9299/1: module: use sign_extend32() to extend the signedness
  ARM: 9298/1: Drop custom mdesc->handle_irq()

Pull m68k updates from Geert Uytterhoeven:

  - miscellaneous NuBus fixes and improvements

  - defconfig updates

* tag 'm68k-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: defconfig: Update defconfigs for v6.4-rc1
  nubus: Don't list slot resources by default
  nubus: Remove proc entries before adding them
  nubus: Partially revert proc_create_single_data() conversion

Pull x86 cleanups from Dave Hansen:
 "As usual, these are all over the map. The biggest cluster is work from
  Arnd to eliminate -Wmissing-prototype warnings:

   - Address -Wmissing-prototype warnings

   - Remove repeated 'the' in comments

   - Remove unused current_untag_mask()

   - Document urgent tip branch timing

   - Clean up MSR kernel-doc notation

   - Clean up paravirt_ops doc

   - Update Srivatsa S. Bhat's maintained areas

   - Remove unused extern declaration acpi_copy_wakeup_routine()"

* tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine()
  Documentation: virt: Clean up paravirt_ops doc
  x86/mm: Remove unused current_untag_mask()
  x86/mm: Remove repeated word in comments
  x86/lib/msr: Clean up kernel-doc notation
  x86/platform: Avoid missing-prototype warnings for OLPC
  x86/mm: Add early_memremap_pgprot_adjust() prototype
  x86/usercopy: Include arch_wb_cache_pmem() declaration
  x86/vdso: Include vdso/processor.h
  x86/mce: Add copy_mc_fragile_handle_tail() prototype
  x86/fbdev: Include asm/fb.h as needed
  x86/hibernate: Declare global functions in suspend.h
  x86/entry: Add do_SYSENTER_32() prototype
  x86/quirks: Include linux/pnp.h for arch_pnpbios_disabled()
  x86/mm: Include asm/numa.h for set_highmem_pages_init()
  x86: Avoid missing-prototype warnings for doublefault code
  x86/fpu: Include asm/fpu/regset.h
  x86: Add dummy prototype for mk_early_pgtbl_32()
  x86/pci: Mark local functions as 'static'
  x86/ftrace: Move prepare_ftrace_return prototype to header
  ...

Pull x86 tdx updates from Dave Hansen:

 - Fix a race window where load_unaligned_zeropad() could cause a fatal
   shutdown during TDX private<=>shared conversion

   The race has never been observed in practice but might allow
   load_unaligned_zeropad() to catch a TDX page in the middle of its
   conversion process which would lead to a fatal and unrecoverable
   guest shutdown.

 - Annotate sites where VM "exit reasons" are reused as hypercall
   numbers.

* tag 'x86_tdx_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix enc_status_change_finish_noop()
  x86/tdx: Fix race between set_memory_encrypted() and load_unaligned_zeropad()
  x86/mm: Allow guest.enc_status_change_prepare() to fail
  x86/tdx: Wrap exit reason with hcall_func()

Pull x86 platform updates from Dave Hansen:
 "Allow CPUs in SGX/HPE Ultraviolet to start using Sub-NUMA clustering
  (SNC) mode. SNC has been around outside the UV world for a while but
  evidently never worked on UV systems.

  SNC is rather notorious for breaking bad assumptions of a 1:1
  relationship between physical sockets and NUMA nodes. The UV code was
  rather prolific with these assumptions and took quite a bit of
  refactoring to remove them"

* tag 'x86_platform_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Update UV[23] platform code for SNC
  x86/platform/uv: Remove remaining BUG_ON() and BUG() calls
  x86/platform/uv: UV support for sub-NUMA clustering
  x86/platform/uv: Helper functions for allocating and freeing conversion tables
  x86/platform/uv: When searching for minimums, start at INT_MAX not 99999
  x86/platform/uv: Fix printed information in calc_mmioh_map
  x86/platform/uv: Introduce helper function uv_pnode_to_socket.
  x86/platform/uv: Add platform resolving #defines for misc GAM_MMIOH_REDIRECT*

Pull x86 irq updates from Dave Hansen:
 "Add Hyper-V interrupts to /proc/stat"

* tag 'x86_irq_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Add hardcoded hypervisor interrupts to /proc/stat

Pull x86 cpu updates from Borislav Petkov:

 - Compute the purposeful misalignment of zen_untrain_ret automatically
   and assert __x86_return_thunk's alignment so that future changes to
   the symbol macros do not accidentally break them.

 - Remove CONFIG_X86_FEATURE_NAMES Kconfig option as its existence is
   pointless

* tag 'x86_cpu_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retbleed: Add __x86_return_thunk alignment checks
  x86/cpu: Remove X86_FEATURE_NAMES
  x86/Kconfig: Make X86_FEATURE_NAMES non-configurable in prompt

Pull x86 confidential computing update from Borislav Petkov:

 - Add support for unaccepted memory as specified in the UEFI spec v2.9.

   The gist of it all is that Intel TDX and AMD SEV-SNP confidential
   computing guests define the notion of accepting memory before using
   it and thus preventing a whole set of attacks against such guests
   like memory replay and the like.

   There are a couple of strategies of how memory should be accepted -
   the current implementation does an on-demand way of accepting.

* tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  virt: sevguest: Add CONFIG_CRYPTO dependency
  x86/efi: Safely enable unaccepted memory in UEFI
  x86/sev: Add SNP-specific unaccepted memory support
  x86/sev: Use large PSC requests if applicable
  x86/sev: Allow for use of the early boot GHCB for PSC requests
  x86/sev: Put PSC struct on the stack in prep for unaccepted memory support
  x86/sev: Fix calculation of end address based on number of pages
  x86/tdx: Add unaccepted memory support
  x86/tdx: Refactor try_accept_one()
  x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub
  efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory
  efi: Add unaccepted memory support
  x86/boot/compressed: Handle unaccepted memory
  efi/libstub: Implement support for unaccepted memory
  efi/x86: Get full memory map in allocate_e820()
  mm: Add support for unaccepted memory

Pull x86 resource control updates from Borislav Petkov:

 - Implement a rename operation in resctrlfs to facilitate handling of
   application containers with dynamically changing task lists

 - When reading the tasks file, show the tasks' pid which are only in
   the current namespace as opposed to showing the pids from the init
   namespace too

 - Other fixes and improvements

* tag 'x86_cache_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation/x86: Documentation for MON group move feature
  x86/resctrl: Implement rename op for mon groups
  x86/resctrl: Factor rdtgroup lock for multi-file ops
  x86/resctrl: Only show tasks' pid in current pid namespace

Pull x86 build update from Borislav Petkov:

 - Remove relocation information from vmlinux as it is not needed by
   other tooling and thus a slimmer binary is generated.

   This is important for distros who have to distribute vmlinux blobs
   with their kernel packages too and that extraneous unnecessary data
   bloats them for no good reason

* tag 'x86_build_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Avoid relocation information in final vmlinux

Pull x86 instruction alternatives updates from Borislav Petkov:

 - Up until now the Fast Short Rep Mov optimizations implied the
   presence of the ERMS CPUID flag. AMD decoupled them with a BIOS
   setting so decouple that dependency in the kernel code too

 - Teach the alternatives machinery to handle relocations

 - Make debug_alternative accept flags in order to see only that set of
   patching done one is interested in

 - Other fixes, cleanups and optimizations to the patching code

* tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternative: PAUSE is not a NOP
  x86/alternatives: Add cond_resched() to text_poke_bp_batch()
  x86/nospec: Shorten RESET_CALL_DEPTH
  x86/alternatives: Add longer 64-bit NOPs
  x86/alternatives: Fix section mismatch warnings
  x86/alternative: Optimize returns patching
  x86/alternative: Complicate optimize_nops() some more
  x86/alternative: Rewrite optimize_nops() some
  x86/lib/memmove: Decouple ERMS from FSRM
  x86/alternative: Support relocations in alternatives
  x86/alternative: Make debug-alternative selective

Pull RAS updates from Borislav Petkov:

 - Add initial support for RAS hardware found on AMD server GPUs (MI200).

   Those GPUs and CPUs are connected together through the coherent
   fabric and the GPU memory controllers report errors through x86's MCA
   so EDAC needs to support them. The amd64_edac driver supports now HBM
   (High Bandwidth Memory) and thus such heterogeneous memory controller
   systems

 - Other small cleanups and improvements

* tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  EDAC/amd64: Cache and use GPU node map
  EDAC/amd64: Add support for AMD heterogeneous Family 19h Model 30h-3Fh
  EDAC/amd64: Document heterogeneous system enumeration
  x86/MCE/AMD, EDAC/mce_amd: Decode UMC_V2 ECC errors
  x86/amd_nb: Re-sort and re-indent PCI defines
  x86/amd_nb: Add MI200 PCI IDs
  ras/debugfs: Fix error checking for debugfs_create_dir()
  x86/MCE: Check a hw error's address to determine proper recovery action

Pull EDAC updates from Borislav Petkov:

 - amd64_edac: Add support for Zen4 client hardware

 - amd64_edac: Remove the version string as it is useless and actively
   confusing when looking at backported versions of the driver

 - Add a driver for the Nuvoton NPCM memory controller

 - A debugfs error checking cleanup

* tag 'edac_updates_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/npcm: Add NPCM memory controller driver
  dt-bindings: memory-controllers: nuvoton: Add NPCM memory controller
  EDAC/thunderx: Check debugfs file creation retval properly
  EDAC/amd64: Add support for ECC on family 19h model 60h-7Fh
  EDAC/amd64: Remove module version string

Pull x86 core updates from Thomas Gleixner:
 "A set of fixes for kexec(), reboot and shutdown issues:

   - Ensure that the WBINVD in stop_this_cpu() has been completed before
     the control CPU proceedes.

     stop_this_cpu() is used for kexec(), reboot and shutdown to park
     the APs in a HLT loop.

     The control CPU sends an IPI to the APs and waits for their CPU
     online bits to be cleared. Once they all are marked "offline" it
     proceeds.

     But stop_this_cpu() clears the CPU online bit before issuing
     WBINVD, which means there is no guarantee that the AP has reached
     the HLT loop.

     This was reported to cause intermittent reboot/shutdown failures
     due to some dubious interaction with the firmware.

     This is not only a problem of WBINVD. The code to actually "stop"
     the CPU which runs between clearing the online bit and reaching the
     HLT loop can cause large enough delays on its own (think
     virtualization). That's especially dangerous for kexec() as kexec()
     expects that all APs are in a safe state and not executing code
     while the boot CPU jumps to the new kernel. There are more issues
     vs kexec() which are addressed separately.

     Cure this by implementing an explicit synchronization point right
     before the AP reaches HLT. This guarantees that the AP has
     completed the full stop proceedure.

   - Fix the condition for WBINVD in stop_this_cpu().

     The WBINVD in stop_this_cpu() is required for ensuring that when
     switching to or from memory encryption no dirty data is left in the
     cache lines which might cause a write back in the wrong more later.

     This checks CPUID directly because the feature bit might have been
     cleared due to a command line option.

     But that CPUID check accesses leaf 0x8000001f::EAX unconditionally.
     Intel CPUs return the content of the highest supported leaf when a
     non-existing leaf is read, while AMD CPUs return all zeros for
     unsupported leafs.

     So the result of the test on Intel CPUs is lottery and on AMD its
     just correct by chance.

     While harmless it's incorrect and causes the conditional wbinvd()
     to be issued where not required, which caused the above issue to be
     unearthed.

   - Make kexec() robust against AP code execution

     Ashok observed triple faults when doing kexec() on a system which
     had been booted with "nosmt".

     It turned out that the SMT siblings which had been brought up
     partially are parked in mwait_play_dead() to enable power savings.

     mwait_play_dead() is monitoring the thread flags of the AP's idle
     task, which has been chosen as it's unlikely to be written to.

     But kexec() can overwrite the previous kernel text and data
     including page tables etc. When it overwrites the cache lines
     monitored by an AP that AP resumes execution after the MWAIT on
     eventually overwritten text, stack and page tables, which obviously
     might end up in a triple fault easily.

     Make this more robust in several steps:

      1) Use an explicit per CPU cache line for monitoring.

      2) Write a command to these cache lines to kick APs out of MWAIT
         before proceeding with kexec(), shutdown or reboot.

         The APs confirm the wakeup by writing status back and then
         enter a HLT loop.

      3) If the system uses INIT/INIT/STARTUP for AP bringup, park the
         APs in INIT state.

         HLT is not a guarantee that an AP won't wake up and resume
         execution. HLT is woken up by NMI and SMI. SMI puts the CPU
         back into HLT (+/- firmware bugs), but NMI is delivered to the
         CPU which executes the NMI handler. Same issue as the MWAIT
         scenario described above.

         Sending an INIT/INIT sequence to the APs puts them into wait
         for STARTUP state, which is safe against NMI.

     There is still an issue remaining which can't be fixed: #MCE

     If the AP sits in HLT and receives a broadcast #MCE it will try to
     handle it with the obvious consequences.

     INIT/INIT clears CR4.MCE in the AP which will cause a broadcast
     #MCE to shut down the machine.

     So there is a choice between fire (HLT) and frying pan (INIT).
     Frying pan has been chosen as it's at least preventing the NMI
     issue.

     On systems which are not using INIT/INIT/STARTUP there is not much
     which can be done right now, but at least the obvious and easy to
     trigger MWAIT issue has been addressed"

* tag 'x86-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/smp: Put CPUs into INIT on shutdown if possible
  x86/smp: Split sending INIT IPI out into a helper function
  x86/smp: Cure kexec() vs. mwait_play_dead() breakage
  x86/smp: Use dedicated cache-line for mwait_play_dead()
  x86/smp: Remove pointless wmb()s from native_stop_other_cpus()
  x86/smp: Dont access non-existing CPUID leaf
  x86/smp: Make stop_other_cpus() more robust

Pull timer updates from Thomas Gleixner:
 "Time, timekeeping and related device driver updates:

  Core:

   - A set of fixes, cleanups and enhancements to the posix timer code:

       - Prevent another possible live lock scenario in the exit() path,
         which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures.

       - Fix a loop termination issue which was reported syzcaller/KSAN
         in the posix timer ID allocation code.

         That triggered a deeper look into the posix-timer code which
         unearthed more small issues.

       - Add missing READ/WRITE_ONCE() annotations

       - Fix or remove completely outdated comments

       - Document places which are subtle and completely undocumented.

   - Add missing hrtimer modes to the trace event decoder

   - Small cleanups and enhancements all over the place

  Drivers:

   - Rework the Hyper-V clocksource and sched clock setup code

   - Remove a deprecated clocksource driver

   - Small fixes and enhancements all over the place"

* tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
  dt-bindings: timers: Add Ralink SoCs timer
  clocksource/drivers/hyper-v: Rework clocksource and sched clock setup
  dt-bindings: timer: brcm,kona-timer: convert to YAML
  clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user
  clk: imx: Drop inclusion of unused header <soc/imx/timer.h>
  hrtimer: Add missing sparse annotations to hrtimer locking
  clocksource/drivers/imx-gpt: Use only a single name for functions
  clocksource/drivers/loongson1: Move PWM timer to clocksource framework
  dt-bindings: timer: Add Loongson-1 clocksource
  MIPS: Loongson32: Remove deprecated PWM timer clocksource
  clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro
  tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
  posix-timers: Add sys_ni_posix_timers() prototype
  tick/rcu: Fix bogus ratelimit condition
  alarmtimer: Remove unnecessary (void *) cast
  alarmtimer: Remove unnecessary initialization of variable 'ret'
  posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS
  posix-timers: Polish coding style in a few places
  posix-timers: Remove pointless comments
  ...

Pull SMP updates from Thomas Gleixner:
 "A large update for SMP management:

   - Parallel CPU bringup

     The reason why people are interested in parallel bringup is to
     shorten the (kexec) reboot time of cloud servers to reduce the
     downtime of the VM tenants.

     The current fully serialized bringup does the following per AP:

       1) Prepare callbacks (allocate, intialize, create threads)
       2) Kick the AP alive (e.g. INIT/SIPI on x86)
       3) Wait for the AP to report alive state
       4) Let the AP continue through the atomic bringup
       5) Let the AP run the threaded bringup to full online state

     There are two significant delays:

       #3 The time for an AP to report alive state in start_secondary()
          on x86 has been measured in the range between 350us and 3.5ms
          depending on vendor and CPU type, BIOS microcode size etc.

       #4 The atomic bringup does the microcode update. This has been
          measured to take up to ~8ms on the primary threads depending
          on the microcode patch size to apply.

     On a two socket SKL server with 56 cores (112 threads) the boot CPU
     spends on current mainline about 800ms busy waiting for the APs to
     come up and apply microcode. That's more than 80% of the actual
     onlining procedure.

     This can be reduced significantly by splitting the bringup
     mechanism into two parts:

       1) Run the prepare callbacks and kick the AP alive for each AP
          which needs to be brought up.

          The APs wake up, do their firmware initialization and run the
          low level kernel startup code including microcode loading in
          parallel up to the first synchronization point. (#1 and #2
          above)

       2) Run the rest of the bringup code strictly serialized per CPU
          (#3 - #5 above) as it's done today.

          Parallelizing that stage of the CPU bringup might be possible
          in theory, but it's questionable whether required surgery
          would be justified for a pretty small gain.

     If the system is large enough the first AP is already waiting at
     the first synchronization point when the boot CPU finished the
     wake-up of the last AP. That reduces the AP bringup time on that
     SKL from ~800ms to ~80ms, i.e. by a factor ~10x.

     The actual gain varies wildly depending on the system, CPU,
     microcode patch size and other factors. There are some
     opportunities to reduce the overhead further, but that needs some
     deep surgery in the x86 CPU bringup code.

     For now this is only enabled on x86, but the core functionality
     obviously works for all SMP capable architectures.

   - Enhancements for SMP function call tracing so it is possible to
     locate the scheduling and the actual execution points. That allows
     to measure IPI delivery time precisely"

* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  trace,smp: Add tracepoints for scheduling remotelly called functions
  trace,smp: Add tracepoints around remotelly called functions
  MAINTAINERS: Add CPU HOTPLUG entry
  x86/smpboot: Fix the parallel bringup decision
  x86/realmode: Make stack lock work in trampoline_compat()
  x86/smp: Initialize cpu_primary_thread_mask late
  cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
  x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
  x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
  x86/smpboot: Support parallel startup of secondary CPUs
  x86/smpboot: Implement a bit spinlock to protect the realmode stack
  x86/apic: Save the APIC virtual base address
  cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
  x86/apic: Provide cpu_primary_thread mask
  x86/smpboot: Enable split CPU startup
  cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
  cpu/hotplug: Reset task stack state in _cpu_up()
  cpu/hotplug: Remove unused state functions
  riscv: Switch to hotplug core state synchronization
  parisc: Switch to hotplug core state synchronization
  ...

Pull x86 boot updates from Thomas Gleixner:
 "Initialize FPU late.

  Right now FPU is initialized very early during boot. There is no real
  requirement to do so. The only requirement is to have it done before
  alternatives are patched.

  That's done in check_bugs() which does way more than what the function
  name suggests.

  So first rename check_bugs() to arch_cpu_finalize_init() which makes
  it clear what this is about.

  Move the invocation of arch_cpu_finalize_init() earlier in
  start_kernel() as it has to be done before fork_init() which needs to
  know the FPU register buffer size.

  With those prerequisites the FPU initialization can be moved into
  arch_cpu_finalize_init(), which removes it from the early and fragile
  part of the x86 bringup"

* tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build
  x86/fpu: Move FPU initialization into arch_cpu_finalize_init()
  x86/fpu: Mark init functions __init
  x86/fpu: Remove cpuinfo argument from init functions
  x86/init: Initialize signal frame size late
  init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init()
  init: Invoke arch_cpu_finalize_init() earlier
  init: Remove check_bugs() leftovers
  um/cpu: Switch to arch_cpu_finalize_init()
  sparc/cpu: Switch to arch_cpu_finalize_init()
  sh/cpu: Switch to arch_cpu_finalize_init()
  mips/cpu: Switch to arch_cpu_finalize_init()
  m68k/cpu: Switch to arch_cpu_finalize_init()
  loongarch/cpu: Switch to arch_cpu_finalize_init()
  ia64/cpu: Switch to arch_cpu_finalize_init()
  ARM: cpu: Switch to arch_cpu_finalize_init()
  x86/cpu: Switch to arch_cpu_finalize_init()
  init: Provide arch_cpu_finalize_init()

Pull irq updates from Thomas Gleixner:
 "Updates for the interrupt subsystem:

  Core:

   - Convert the interrupt descriptor storage to a maple tree to
     overcome the limitations of the radixtree + fixed size bitmap.

     This allows us to handle very large servers with a huge number of
     guests without imposing a huge memory overhead on everyone

   - Implement optional retriggering of interrupts which utilize the
     fasteoi handler to work around a GICv3 architecture issue

  Drivers:

   - A set of fixes and updates for the Loongson/Loongarch related
     drivers

   - Workaound for an ASR8601 integration hickup which ends up with CPU
     numbering which can't be represented in the GIC implementation

   - The usual set of boring fixes and updates all over the place"

* tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  Revert "irqchip/mxs: Include linux/irqchip/mxs.h"
  irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
  irqchip/stm32-exti: Fix warning on initialized field overwritten
  irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map
  irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype
  irqchip/mxs: Include linux/irqchip/mxs.h
  irqchip/clps711x: Remove unused clps711x_intc_init() function
  irqchip/mmp: Remove non-DT codepath
  irqchip/ftintc010: Mark all function static
  irqdomain: Include internals.h for function prototypes
  irqchip/loongson-eiointc: Add DT init support
  dt-bindings: interrupt-controller: Add Loongson EIOINTC
  irqchip/loongson-eiointc: Fix irq affinity setting during resume
  irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag
  irqchip/loongson-liointc: Fix IRQ trigger polarity
  irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment
  irqchip/loongson-pch-pic: Fix initialization of HT vector register
  irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs
  genirq: Allow fasteoi handler to resend interrupts on concurrent handling
  genirq: Expand doc for PENDING and REPLAY flags
  ...

Merge tag 'core-debugobjects-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull debugobjects update from Thomas Gleixner:
 "A single update for debug objects:

   - Recheck whether debug objects is enabled before reporting a problem
     to avoid spamming the logs with messages which are caused by a
     concurrent OOM"

* tag 'core-debugobjects-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Recheck debug_objects_enabled before reporting

Pull block updates from Jens Axboe:

 - NVMe pull request via Keith:
      - Various cleanups all around (Irvin, Chaitanya, Christophe)
      - Better struct packing (Christophe JAILLET)
      - Reduce controller error logs for optional commands (Keith)
      - Support for >=64KiB block sizes (Daniel Gomez)
      - Fabrics fixes and code organization (Max, Chaitanya, Daniel
        Wagner)

 - bcache updates via Coly:
      - Fix a race at init time (Mingzhe Zou)
      - Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)

 - use page pinning in the block layer for dio (David)

 - convert old block dio code to page pinning (David, Christoph)

 - cleanups for pktcdvd (Andy)

 - cleanups for rnbd (Guoqing)

 - use the unchecked __bio_add_page() for the initial single page
   additions (Johannes)

 - fix overflows in the Amiga partition handling code (Michael)

 - improve mq-deadline zoned device support (Bart)

 - keep passthrough requests out of the IO schedulers (Christoph, Ming)

 - improve support for flush requests, making them less special to deal
   with (Christoph)

 - add bdev holder ops and shutdown methods (Christoph)

 - fix the name_to_dev_t() situation and use cases (Christoph)

 - decouple the block open flags from fmode_t (Christoph)

 - ublk updates and cleanups, including adding user copy support (Ming)

 - BFQ sanity checking (Bart)

 - convert brd from radix to xarray (Pankaj)

 - constify various structures (Thomas, Ivan)

 - more fine grained persistent reservation ioctl capability checks
   (Jingbo)

 - misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
   Jordy, Li, Min, Yu, Zhong, Waiman)

* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
  scsi/sg: don't grab scsi host module reference
  ext4: Fix warning in blkdev_put()
  block: don't return -EINVAL for not found names in devt_from_devname
  cdrom: Fix spectre-v1 gadget
  block: Improve kernel-doc headers
  blk-mq: don't insert passthrough request into sw queue
  bsg: make bsg_class a static const structure
  ublk: make ublk_chr_class a static const structure
  aoe: make aoe_class a static const structure
  block/rnbd: make all 'class' structures const
  block: fix the exclusive open mask in disk_scan_partitions
  block: add overflow checks for Amiga partition support
  block: change all __u32 annotations to __be32 in affs_hardblocks.h
  block: fix signed int overflow in Amiga partition support
  block: add capacity validation in bdev_add_partition()
  block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
  block: disallow Persistent Reservation on partitions
  reiserfs: fix blkdev_put() warning from release_journal_dev()
  block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
  block: document the holder argument to blkdev_get_by_path
  ...

Pull io_uring updates from Jens Axboe:
 "Nothing major in this release, just a bunch of cleanups and some
  optimizations around networking mostly.

   - clean up file request flags handling (Christoph)

   - clean up request freeing and CQ locking (Pavel)

   - support for using pre-registering the io_uring fd at setup time
     (Josh)

   - Add support for user allocated ring memory, rather than having the
     kernel allocate it. Mostly for packing rings into a huge page (me)

   - avoid an unnecessary double retry on receive (me)

   - maintain ordering for task_work, which also improves performance
     (me)

   - misc cleanups/fixes (Pavel, me)"

* tag 'for-6.5/io_uring-2023-06-23' of git://git.kernel.dk/linux: (39 commits)
  io_uring: merge conditional unlock flush helpers
  io_uring: make io_cq_unlock_post static
  io_uring: inline __io_cq_unlock
  io_uring: fix acquire/release annotations
  io_uring: kill io_cq_unlock()
  io_uring: remove IOU_F_TWQ_FORCE_NORMAL
  io_uring: don't batch task put on reqs free
  io_uring: move io_clean_op()
  io_uring: inline io_dismantle_req()
  io_uring: remove io_free_req_tw
  io_uring: open code io_put_req_find_next
  io_uring: add helpers to decode the fixed file file_ptr
  io_uring: use io_file_from_index in io_msg_grab_file
  io_uring: use io_file_from_index in __io_sync_cancel
  io_uring: return REQ_F_ flags from io_file_get_flags
  io_uring: remove io_req_ffs_set
  io_uring: remove a confusing comment above io_file_get_flags
  io_uring: remove the mode variable in io_file_get_flags
  io_uring: remove __io_file_supports_nowait
  io_uring: wait interruptibly for request completions on exit
  ...

Pull splice updates from Jens Axboe:
 "This kills off ITER_PIPE to avoid a race between truncate,
  iov_iter_revert() on the pipe and an as-yet incomplete DMA to a bio
  with unpinned/unref'ed pages from an O_DIRECT splice read. This causes
  memory corruption.

  Instead, we either use (a) filemap_splice_read(), which invokes the
  buffered file reading code and splices from the pagecache into the
  pipe; (b) copy_splice_read(), which bulk-allocates a buffer, reads
  into it and then pushes the filled pages into the pipe; or (c) handle
  it in filesystem-specific code.

  Summary:

   - Rename direct_splice_read() to copy_splice_read()

   - Simplify the calculations for the number of pages to be reclaimed
     in copy_splice_read()

   - Turn do_splice_to() into a helper, vfs_splice_read(), so that it
     can be used by overlayfs and coda to perform the checks on the
     lower fs

   - Make vfs_splice_read() jump to copy_splice_read() to handle
     direct-I/O and DAX

   - Provide shmem with its own splice_read to handle non-existent pages
     in the pagecache. We don't want a ->read_folio() as we don't want
     to populate holes, but filemap_get_pages() requires it

   - Provide overlayfs with its own splice_read to call down to a lower
     layer as overlayfs doesn't provide ->read_folio()

   - Provide coda with its own splice_read to call down to a lower layer
     as coda doesn't provide ->read_folio()

   - Direct ->splice_read to copy_splice_read() in tty, procfs, kernfs
     and random files as they just copy to the output buffer and don't
     splice pages

   - Provide wrappers for afs, ceph, ecryptfs, ext4, f2fs, nfs, ntfs3,
     ocfs2, orangefs, xfs and zonefs to do locking and/or revalidation

   - Make cifs use filemap_splice_read()

   - Replace pointers to generic_file_splice_read() with pointers to
     filemap_splice_read() as DIO and DAX are handled in the caller;
     filesystems can still provide their own alternate ->splice_read()
     op

   - Remove generic_file_splice_read()

   - Remove ITER_PIPE and its paraphernalia as generic_file_splice_read
     was the only user"

* tag 'for-6.5/splice-2023-06-23' of git://git.kernel.dk/linux: (31 commits)
  splice: kdoc for filemap_splice_read() and copy_splice_read()
  iov_iter: Kill ITER_PIPE
  splice: Remove generic_file_splice_read()
  splice: Use filemap_splice_read() instead of generic_file_splice_read()
  cifs: Use filemap_splice_read()
  trace: Convert trace/seq to use copy_splice_read()
  zonefs: Provide a splice-read wrapper
  xfs: Provide a splice-read wrapper
  orangefs: Provide a splice-read wrapper
  ocfs2: Provide a splice-read wrapper
  ntfs3: Provide a splice-read wrapper
  nfs: Provide a splice-read wrapper
  f2fs: Provide a splice-read wrapper
  ext4: Provide a splice-read wrapper
  ecryptfs: Provide a splice-read wrapper
  ceph: Provide a splice-read wrapper
  afs: Provide a splice-read wrapper
  9p: Add splice_read wrapper
  net: Make sock_splice_read() use copy_splice_read() by default
  tty, proc, kernfs, random: Use copy_splice_read()
  ...

Pull btrfs updates from David Sterba:
 "Mainly core changes, refactoring and optimizations.

  Performance is improved in some areas, overall there may be a
  cumulative improvement due to refactoring that removed lookups in the
  IO path or simplified IO submission tracking.

  Core:

   - submit IO synchronously for fast checksums (crc32c and xxhash),
     remove high priority worker kthread

   - read extent buffer in one go, simplify IO tracking, bio submission
     and locking

   - remove additional tracking of redirtied extent buffers, originally
     added for zoned mode but actually not needed

   - track ordered extent pointer in bio to avoid rbtree lookups during
     IO

   - scrub, use recovered data stripes as cache to avoid unnecessary
     read

   - in zoned mode, optimize logical to physical mappings of extents

   - remove PageError handling, not set by VFS nor writeback

   - cleanups, refactoring, better structure packing

   - lots of error handling improvements

   - more assertions, lockdep annotations

   - print assertion failure with the exact line where it happens

   - tracepoint updates

   - more debugging prints

  Performance:

   - speedup in fsync(), better tracking of inode logged status can
     avoid transaction commit

   - IO path structures track logical offsets in data structures and
     does not need to look it up

  User visible changes:

   - don't commit transaction for every created subvolume, this can
     reduce time when many subvolumes are created in a batch

   - print affected files when relocation fails

   - trigger orphan file cleanup during START_SYNC ioctl

  Notable fixes:

   - fix crash when disabling quota and relocation

   - fix crashes when removing roots from drity list

   - fix transacion abort during relocation when converting from newer
     profiles not covered by fallback

   - in zoned mode, stop reclaiming block groups if filesystem becomes
     read-only

   - fix rare race condition in tree mod log rewind that can miss some
     btree node slots

   - with enabled fsverity, drop up-to-date page bit in case the
     verification fails"

* tag 'for-6.5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (194 commits)
  btrfs: fix race between quota disable and relocation
  btrfs: add comment to struct btrfs_fs_info::dirty_cowonly_roots
  btrfs: fix race when deleting free space root from the dirty cow roots list
  btrfs: fix race when deleting quota root from the dirty cow roots list
  btrfs: tracepoints: also show actual number of the outstanding extents
  btrfs: update i_version in update_dev_time
  btrfs: make btrfs_compressed_bioset static
  btrfs: add handling for RAID1C23/DUP to btrfs_reduce_alloc_profile
  btrfs: scrub: remove btrfs_fs_info::scrub_wr_completion_workers
  btrfs: scrub: remove scrub_ctx::csum_list member
  btrfs: do not BUG_ON after failure to migrate space during truncation
  btrfs: do not BUG_ON on failure to get dir index for new snapshot
  btrfs: send: do not BUG_ON() on unexpected symlink data extent
  btrfs: do not BUG_ON() when dropping inode items from log root
  btrfs: replace BUG_ON() at split_item() with proper error handling
  btrfs: do not BUG_ON() on tree mod log failures at btrfs_del_ptr()
  btrfs: do not BUG_ON() on tree mod log failures at insert_ptr()
  btrfs: do not BUG_ON() on tree mod log failure at insert_new_root()
  btrfs: do not BUG_ON() on tree mod log failures at push_nodes_for_insert()
  btrfs: abort transaction at update_ref_for_cow() when ref count is zero
  ...

Pull zonefs updates from Damien Le Moal:

 - Modify the synchronous direct write path to use iomap instead of
   manually coding issuing zone append write BIOs (me)

 - Use the FMODE_CAN_ODIRECT file flag to indicate support from direct
   IO instead of using the old way with noop direct_io methods
   (Christoph)

* tag 'zonefs-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
  zonefs: use iomap for synchronous direct writes

Pull erofs updates from Gao Xiang:
 "No outstanding new feature for this cycle.

  Most of these commits are decompression cleanups which are part of the
  ongoing development for subpage/folio compression support as well as
  xattr cleanups for the upcoming xattr bloom filter optimization [1].

  In addition, there are bugfixes to address some corner cases of
  compressed images due to global data de-duplication and arm64 16k
  pages.

  Summary:

   - Fix rare I/O hang on deduplicated compressed images due to loop
     hooked chains

   - Fix compact compression layout of 16k blocks on arm64 devices

   - Fix atomic context detection of async decompression

   - Decompression/Xattr code cleanups"

Link: https://lore.kernel.org/r/20230621083209.116024-1-jefflexu@linux.alibaba.com [1]

* tag 'erofs-for-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: clean up zmap.c
  erofs: remove unnecessary goto
  erofs: Fix detection of atomic context
  erofs: use separate xattr parsers for listxattr/getxattr
  erofs: unify inline/shared xattr iterators for listxattr/getxattr
  erofs: make the size of read data stored in buffer_ofs
  erofs: unify xattr_iter structures
  erofs: use absolute position in xattr iterator
  erofs: fix compact 4B support for 16k block size
  erofs: convert erofs_read_metabuf() to erofs_bread() for xattr
  erofs: use poison pointer to replace the hard-coded address
  erofs: use struct lockref to replace handcrafted approach
  erofs: adapt managed inode operations into folios
  erofs: kill hooked chains to avoid loops on deduplicated compressed images
  erofs: avoid on-stack pagepool directly passed by arguments
  erofs: allocate extra bvec pages directly instead of retrying
  erofs: clean up z_erofs_pcluster_readmore()
  erofs: remove the member readahead from struct z_erofs_decompress_frontend
  erofs: fold in z_erofs_decompress()

Pull fsverity updates from Eric Biggers:
 "Several updates for fs/verity/:

   - Do all hashing with the shash API instead of with the ahash API.

     This simplifies the code and reduces API overhead. It should also
     make things slightly easier for XFS's upcoming support for
     fsverity. It does drop fsverity's support for off-CPU hash
     accelerators, but that support was incomplete and not known to be
     used

   - Update and export fsverity_get_digest() so that it's ready for
     overlayfs's upcoming support for fsverity checking of lowerdata

   - Improve the documentation for builtin signature support

   - Fix a bug in the large folio support"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fsverity/linux:
  fsverity: improve documentation for builtin signature support
  fsverity: rework fsverity_get_digest() again
  fsverity: simplify error handling in verify_data_block()
  fsverity: don't use bio_first_page_all() in fsverity_verify_bio()
  fsverity: constify fsverity_hash_alg
  fsverity: use shash API instead of ahash API

Pull fscrypt update from Eric Biggers:
 "Just one flex array conversion patch"

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
  fscrypt: Replace 1-element array with flexible array