- 07 Nov, 2019 8 commits
-
-
Johan Hovold authored
Drop redundant NULL check from tower_abort_transfers(), which is never called with a NULL argument. Signed-off-by:
Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20191105084152.16322-3-johan@kernel.orgSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
The MODULE_LICENSE macro is unconditionally defined in module.h, no need to ifdef its use. Signed-off-by:
-
Johan Hovold authored
Drop space between function identifiers and opening parenthesis, which was no longer even used consistently within the driver. Signed-off-by:
-
Johan Hovold authored
The open count will always be exactly one when release is called, so drop the redundant sanity check. Signed-off-by:
-
Johan Hovold authored
Since commit d4ead16f ("USB: prevent char device open/deregister race") core prevents further calls to open() after usb_deregister_dev() returns so there's no need to use the interface data for synchronisation. This effectively reverts commit 54d2bc06 ("USB: fix locking in idmouse") with respect to the open-disconnect race. Note that the driver already uses a present flag to suppress I/O post disconnect (even if all USB I/O take place at open). Signed-off-by:
-
Kai-Heng Feng authored
On Dell WD15 dock, sometimes USB ethernet cannot be detected after plugging cable to the ethernet port, the hub and roothub get runtime resumed and runtime suspended immediately: ... [ 433.315169] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0 [ 433.315204] usb usb4: usb auto-resume [ 433.315226] hub 4-0:1.0: hub_resume [ 433.315239] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10202e2, return 0x10343 [ 433.315264] usb usb4-port1: status 0343 change 0001 [ 433.315279] xhci_hcd 0000:3a:00.0: clear port1 connect change, portsc: 0x10002e2 [ 433.315293] xhci_hcd 0000:3a:00.0: Get port status 4-2 read: 0x2a0, return 0x2a0 [ 433.317012] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.422282] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343 [ 433.422307] usb usb4-port1: do warm reset [ 433.422311] usb 4-1: device reset not allowed in state 8 [ 433.422339] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 433.422346] xhci_hcd 0000:3a:00.0: Get port status 4-1 read: 0x10002e2, return 0x343 [ 433.422356] usb usb4-port1: do warm reset [ 433.422358] usb 4-1: device reset not allowed in state 8 [ 433.422428] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 0 status = 0xf0002e2 [ 433.422455] xhci_hcd 0000:3a:00.0: set port remote wake mask, actual port 1 status = 0xe0002a0 [ 433.422465] hub 4-0:1.0: hub_suspend [ 433.422475] usb usb4: bus auto-suspend, wakeup 1 [ 433.426161] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.466209] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.510204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.554051] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.598235] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.642154] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.686204] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.730205] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.774203] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.818207] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.862040] xhci_hcd 0000:3a:00.0: port 0 polling in bus suspend, waiting [ 433.862053] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.862077] xhci_hcd 0000:3a:00.0: xhci_suspend: stopping port polling. [ 433.862096] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001 [ 433.862312] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_suspend: 0 [ 433.862445] xhci_hcd 0000:3a:00.0: PME# enabled [ 433.902376] xhci_hcd 0000:3a:00.0: restoring config space at offset 0xc (was 0x0, writing 0x20) [ 433.902395] xhci_hcd 0000:3a:00.0: restoring config space at offset 0x4 (was 0x100000, writing 0x100403) [ 433.902490] xhci_hcd 0000:3a:00.0: PME# disabled [ 433.902504] xhci_hcd 0000:3a:00.0: enabling bus mastering [ 433.902547] xhci_hcd 0000:3a:00.0: // Setting command ring address to 0x8578fc001 [ 433.902649] pcieport 0000:00:1b.0: PME: Spurious native interrupt! [ 433.902839] xhci_hcd 0000:3a:00.0: Port change event, 4-1, id 3, portsc: 0xb0202e2 [ 433.902842] xhci_hcd 0000:3a:00.0: resume root hub [ 433.902845] xhci_hcd 0000:3a:00.0: handle_port_status: starting port polling. [ 433.902877] xhci_hcd 0000:3a:00.0: xhci_resume: starting port polling. [ 433.902889] xhci_hcd 0000:3a:00.0: xhci_hub_status_data: stopping port polling. [ 433.902891] xhci_hcd 0000:3a:00.0: hcd_pci_runtime_resume: 0 [ 433.902919] usb usb4: usb wakeup-resume [ 433.902942] usb usb4: usb auto-resume [ 433.902966] hub 4-0:1.0: hub_resume ... As Mathias pointed out, the hub enters Cold Attach Status state and requires a warm reset. However usb_reset_device() bails out early when the device is in suspended state, as its callers port_event() and hub_event() don't always resume the device. Since there's nothing wrong to reset a suspended device, allow usb_reset_device() to do so to solve the issue. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191106062710.29880-1-kai.heng.feng@canonical.comSigned-off-by:
-
Gustavo A. R. Silva authored
Remove pointer dereference after free. pci_pool_free doesn't care about contents of td. It's just a void* for it Addresses-Coverity-ID: 1091173 ("Use after free") Cc: stable@vger.kernel.org Acked-by:Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Link: https://lore.kernel.org/r/20191106202821.GA20347@embeddedorSigned-off-by:
-
Yoshihiro Shimoda authored
Convert Renesas USB 3.0 Peripheral controller bindings documentation to json-schema. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1573036493-16525-1-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
- 04 Nov, 2019 32 commits
-
-
Heikki Krogerus authored
There is no need to reset the PPM when the interface is unregistered. Quietly silencing the notifications and then unregistering everything is enough. This speeds up ucsi_unregister() a lot. Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by:
Ajay Gupta <ajayg@nvidia.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191104142435.29960-19-heikki.krogerus@linux.intel.comSigned-off-by:
-
Heikki Krogerus authored
Adding new error codes to the driver that were introduced in UCSI specification v1.1. Signed-off-by:
-
Heikki Krogerus authored
We can't use bit fields with data that is received or send to/from the device. Signed-off-by:
-
Heikki Krogerus authored
That data structure was used for constructing the commands before executing them, but it was never really useful. Using the structure just complicated the driver. The commands are 64-bit wide, so it is enough to simply fill a u64 variable. No data structures needed. This simplifies the driver considerable and makes it much easier to for example add support for big endian systems later on. Signed-off-by:
-
Heikki Krogerus authored
The drivers now only use the new API, so removing the old one. Signed-off-by:
-
Heikki Krogerus authored
Replacing the old "cmd" and "sync" callbacks with an implementation of struct ucsi_operations. The interrupt handler will from now on read the CCI (Command Status and Connector Change Indication) register, and call ucsi_connector_change() function and/or complete pending command completions based on it. Signed-off-by:
-
Heikki Krogerus authored
Replacing the old "cmd" and "sync" callbacks with an implementation of struct ucsi_operations. The ACPI notification (interrupt) handler will from now on read the CCI (Command Status and Connector Change Indication) register, and call ucsi_connector_change() function and/or complete pending command completions based on it. Signed-off-by:
-
Heikki Krogerus authored
Adding more simplified API for interface registration and read and write operations. The registration is split into separate creation and registration phases. That allows the drivers to properly initialize the interface before registering it if necessary. The read and write operations are supplied in a completely separate struct ucsi_operations that is passed to the ucsi_register() function during registration. The new read and write operations will work more traditionally so that the read callback function reads a requested amount of data from an offset, and the write callback functions write the given data to the offset. The drivers will have to support both non-blocking writing and blocking writing. In blocking writing the driver itself is responsible of waiting for the completion event. The new API makes it possible for the drivers to perform tasks also independently of the core ucsi.c, and that should allow for example quirks to be handled completely in the drivers without the need to touch ucsi.c. The old API is kept until all drivers have been converted to the new API. Signed-off-by:
-
Heikki Krogerus authored
The driver already finds the node in order to get reference to the USB role switch. Signed-off-by:
Biju Das <biju.das@bp.renesas.com> Reviewed-by:
-
Heikki Krogerus authored
The members for the muxes are not used, so dropping them. Signed-off-by:
-
Heikki Krogerus authored
There are no more users for them. Signed-off-by:
-
Heikki Krogerus authored
Supplying the operation callbacks as part of a struct typec_operations instead of as part of struct typec_capability during port registration. After this there is not need to keep the capabilities stored anywhere in the driver. Signed-off-by:
-
Heikki Krogerus authored
Supplying the operation callbacks as part of a struct typec_operations instead of as part of struct typec_capability during port registration. Signed-off-by:
-
Heikki Krogerus authored
Supplying the operation callbacks as part of a struct typec_operations instead of as part of struct typec_capability during port registration. After this there is not need to keep the capabilities stored anywhere in the driver. Signed-off-by:
-
Heikki Krogerus authored
Supplying the operation callbacks as part of a struct typec_operations instead of as part of struct typec_capability during port registration. Signed-off-by:
-
Heikki Krogerus authored
Introducing struct typec_operations which has the same callbacks as struct typec_capability. The old callbacks are kept for now, but after all users have been converted, they will be removed. Signed-off-by:
-
Heikki Krogerus authored
Leaving the private driver_data pointer of the port device to the port drivers. Signed-off-by:
-
Heikki Krogerus authored
Copying everything from struct typec_capability to struct typec_port during port registration. This will make sure that under no circumstances the driver can change the values in the struct typec_capability that the port uses. Signed-off-by:
-
Andrey Konovalov authored
Commit fea34091 ("USB: add direction bit to urb->transfer_flags") has added a usb_urb_dir_in() helper function that can be used to determine the direction of the URB. With that patch USB_DIR_IN control requests with wLength == 0 are considered out requests by real USB HCDs. This patch changes dummy-hcd to use the usb_urb_dir_in() helper to match that behavior. Signed-off-by:
Andrey Konovalov <andreyknvl@google.com> Link: https://lore.kernel.org/r/4ae9e68ebca02f08a93ac61fe065057c9a01f0a8.1571667489.git.andreyknvl@google.comSigned-off-by:
-
Andrey Konovalov authored
When fuzzing the USB subsystem with syzkaller, we currently use 8 testing processes within one VM. To isolate testing processes from one another it is desirable to assign a dedicated USB bus to each of those, which means we need at least 8 Dummy UDC/HCD devices. This patch increases the maximum number of Dummy UDC/HCD devices to 32 (more than 8 in case we need more of them in the future). Signed-off-by:
-
Chuhong Yuan authored
The driver forgets to call clk_put when probe fails and remove. Add the calls to fix it. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191102062245.4014-1-hslester96@gmail.comSigned-off-by:
-
Geert Uytterhoeven authored
Fix misspellings of "disconnect". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20191024152747.30617-1-geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
Fix misspellings of "endpoint". Signed-off-by:
Li Yang <leoyang.li@nxp.com> Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/20191024152833.30698-1-geert+renesas@glider.beSigned-off-by:
-
Uwe Kleine-König authored
The USB2422 uses a different package that the USB251x and only comes in a variant with 2 downstream ports. Other than that it is software compatible. Tested-by:
Carsten Stelling <carsten.stelling@goerlitz.com> Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20191023105250.16537-3-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The next patch introduces support for the USB2422. Add it to the list of devices supported by the binding. Signed-off-by:
-
Uwe Kleine-König authored
The five removed symbols are unused since they were introduced in commit 3ec72a2a ("usb: misc: add USB251xB/xBi Hi-Speed Hub Controller Driver") back in 2017. Signed-off-by:
-
Ben Dooks (Codethink) authored
There are a number of places in the driver where it fails to maintain __iomem on pointers used to access registers so fixup the warnings by adding these in the appropriate places. Examples of the sparse warnings fixed: drivers/usb/host/oxu210hp-hcd.c:686:9: warning: incorrect type in argument 2 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:686:9: expected void volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:686:9: got void * drivers/usb/host/oxu210hp-hcd.c:686:9: warning: incorrect type in argument 2 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:686:9: expected void volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:686:9: got void * drivers/usb/host/oxu210hp-hcd.c:686:9: warning: incorrect type in argument 2 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:686:9: expected void volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:686:9: got void * drivers/usb/host/oxu210hp-hcd.c:681:16: warning: incorrect type in argument 1 (different address spaces) drivers/usb/host/oxu210hp-hcd.c:681:16: expected void const volatile [noderef] <asn:2> *addr drivers/usb/host/oxu210hp-hcd.c:681:16: got void * Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191017171934.8771-1-ben.dooks@codethink.co.ukSigned-off-by:
-
Chuhong Yuan authored
bcma_hcd_probe misses a check for devm_gpiod_get and may miss the error. Add a check for it and return the error if a failure occurs. Signed-off-by:
-
Ben Dooks authored
The hcd pointer in ohci_hcd_nxp_probe() is being initialised with a 0, so fix to NULL to avoid the following sparse warning: drivers/usb/host/ohci-nxp.c:153:31: warning: Using plain integer as NULL pointer Signed-off-by:
Sylvain Lemieux <slemieux.tyco@gmail.com> Link: https://lore.kernel.org/r/20191015141945.16067-1-ben.dooks@codethink.co.ukSigned-off-by:
-
Heikki Krogerus authored
Getting handle to the USB role switch by first finding its software fwnode. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Tested-by:
-
Heikki Krogerus authored
Simple wrapper function that searches USB role switches with class_find_device_by_fwnode(). Signed-off-by:
-
Greg Kroah-Hartman authored
We need the USB fixes in here to build on top of. Signed-off-by:
-
