1. 26 Feb, 2018 22 commits
    • Alexey Dobriyan's avatar
      net: make kmem caches as __ro_after_init · 08009a76
      Alexey Dobriyan authored
      All kmem caches aren't reallocated once set up.
      Signed-off-by: default avatarAlexey Dobriyan <adobriyan@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      08009a76
    • David S. Miller's avatar
      Merge branch 'sonic-ethernet-cleanups' · cb31232a
      David S. Miller authored
      Finn Thain says:
      
      ====================
      Fixes, cleanup and modernization for SONIC ethernet drivers
      
      Changes since v4 of combined patch series:
      - Removed redundant and non-portable MACH_IS_MAC tests.
      - Omitted patches unrelated to SONIC drivers.
      - Dropped changes to the 'version_printed' logic and debug message text.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cb31232a
    • Finn Thain's avatar
      net/sonic: Replace custom debug logging with netif_* calls · 995b2a65
      Finn Thain authored
      Eliminate duplicated debug code by moving it into the core driver.
      Don't log the only valid silicon revision number (it's in the source).
      
      Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
      Cc: Chris Zankel <chris@zankel.net>
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      995b2a65
    • Finn Thain's avatar
      net/sonic: Clean up and modernize log messages · bbc2f23a
      Finn Thain authored
      Add missing printk severity levels by adopting pr_foo() calls for the
      platform_driver and dev_foo() calls for the nubus_driver.
      Avoid KERN_CONT usage as per advice from checkpatch.
      Avoid #ifdef around printk calls.
      Don't log driver probe messages after calling register_netdev().
      
      Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
      Cc: Chris Zankel <chris@zankel.net>
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bbc2f23a
    • Finn Thain's avatar
      net/macsonic: Drop redundant MACH_IS_MAC test · 3d16bada
      Finn Thain authored
      The MACH_IS_MAC test is redundant here because the platform device
      won't get registered unless MACH_IS_MAC.
      
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Reviewed-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3d16bada
    • Finn Thain's avatar
      net/macsonic: Convert to nubus_driver · 0d12c687
      Finn Thain authored
      This resolves an old issue preventing any NuBus SONIC NICs from
      working in a Mac with an on-board SONIC device.
      Tested-by: default avatarStan Johnson <userm57@yahoo.com>
      Signed-off-by: default avatarFinn Thain <fthain@telegraphics.com.au>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0d12c687
    • Sergei Shtylyov's avatar
      sh_eth: fix TSU init on SH7734/R8A7740 · a94cf2a6
      Sergei Shtylyov authored
      It appears that the single port Ether controllers having TSU (like SH7734/
      R8A7740) need the same kind of treating in sh_eth_tsu_init() as R7S72100
      currently has -- they also don't have the TSU registers related e.g. to
      passing the frames between ports. Add the 'sh_eth_cpu_data::dual_port'
      flag and use it as a new criterion for taking a "short path" in the TSU
      init sequence in order to avoid writing to the non-existent registers...
      
      Fixes: f0e81fec ("net: sh_eth: Add support SH7734")
      Fixes: 73a0d907 ("net: sh_eth: add support R8A7740")
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Tested-by: default avatarGeert Uytterhoeven <geert+renesas@glider.be>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a94cf2a6
    • Sergei Shtylyov's avatar
      sh_eth: TSU_QTAG0/1 registers the same as TSU_QTAGM0/1 · 4869a147
      Sergei Shtylyov authored
      The TSU_QTAG0/1 registers found in the Gigabit Ether controllers actually
      have the same long name  as the TSU_QTAGM0/1 registers in the early Ether
      controllers:  Qtag Addition/Deletion Set Register (Port 0/1 to 1/0); thus
      there's no need to make a difference in sh_eth_tsu_init() between those
      controllers. Unfortunately, we can't just remove TSU_QTAG0/1 from the
      register *enum* because that would break the ethtool register dump...
      
      Fixes: b0ca2a21 ("sh_eth: Add support of SH7763 to sh_eth")
      Signed-off-by: default avatarSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4869a147
    • BTaskaya's avatar
      tc: python3, string formattings · 3adc1c63
      BTaskaya authored
      This patch converts old type string formattings to new type string
      formattings for adapting Linux Traffic Control (tc) unit testing suite
      python3.
      
      Linux Traffic Control (tc) unit testing suite's code quality improved is improved with this patch.
      According to python documentation;
      "The built-in string class provides the ability to do complex variable substitutions and
      value formatting via the format() method described in PEP 3101. "
      but the project was using old type formattings and new type string formattings together,
      this patch's main purpose is converting all old types to new types.
      
      Following files changed:
       1. tools/testing/selftests/tc-testing/tdc.py
       2. tools/testing/selftests/tc-testing/tdc_batch.py
      
      Following PEP rules applied:
       1. PEP8 - Code Styling
       2. PEP3101 - Advanced Code Formatting
      Signed-off-by: default avatarBatuhan Osman Taskaya <batuhanosmantaskaya@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3adc1c63
    • Colin Ian King's avatar
      xen-netback: make function xenvif_rx_skb static · ed820f47
      Colin Ian King authored
      The function xenvif_rx_skb is local to the source and does not need
      to be in global scope, so make it static.
      
      Cleans up sparse warning:
      drivers/net/xen-netback/rx.c:422:6: warning: symbol 'xenvif_rx_skb'
      was not declared. Should it be static?
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Acked-by: default avatarWei Liu <wei.liu2@citrix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ed820f47
    • David S. Miller's avatar
      Merge branch 'tools-tc-testing-better-error-reporting' · 9e25b6f5
      David S. Miller authored
      Brenda J. Butler says:
      
      ====================
      tools: tc-testing: better error reporting
      
      This patch set contains a bit of cleanup and better error reporting,
      esp. in pre- and post-suite, and pre- and post-case commands.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9e25b6f5
    • Brenda J. Butler's avatar
      tools: tc-testing: better error reporting · f9b63a1c
      Brenda J. Butler authored
      Do a better job with error handling - in pre- and post-suite,
      in pre- and post-case.  Show a traceback for errors.
      Signed-off-by: default avatarBrenda J. Butler <bjb@mojatatu.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f9b63a1c
    • Brenda J. Butler's avatar
      6a7b75f7
    • Colin Ian King's avatar
      sfc: falcon: remove duplicated bit-wise or of LOOPBACK_SGMII · 9baeb5eb
      Colin Ian King authored
      Bit pattern LOOPBACK_SGMII is being bit-wise or'd twice; remove the
      redundant 2nd LOOPBACK_SGMII
      Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9baeb5eb
    • Arnd Bergmann's avatar
      mlxsw: spectrum_kvdl: avoid uninitialized variable warning · ed2da627
      Arnd Bergmann authored
      gcc warns that 'resource_id' is not initialized if we don't come though
      any of the three 'case' statements before:
      
      drivers/net/ethernet/mellanox/mlxsw/spectrum_kvdl.c: In function 'mlxsw_sp_kvdl_part_init':
      drivers/net/ethernet/mellanox/mlxsw/spectrum_kvdl.c:275:8: error: 'resource_id' may be used uninitialized in this function [-Werror=maybe-uninitialized]
      
      In the current code, that won't happen, but it's more robust to explicitly
      handle this by returning a failure from mlxsw_sp_kvdl_part_init.
      
      Fixes: 887839e6 ("mlxsw: spectrum_kvdl: Add support for dynamic partition set")
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarArkadi Sharshevsky <arkadis@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ed2da627
    • Arnd Bergmann's avatar
      mlxsw: spectrum_kvdl: use div_u64() for 64-bit division · b89c7695
      Arnd Bergmann authored
      Calculating the number of entries now uses 64-bit arithmetic that
      causes a link error on 32-bit architectures:
      
      drivers/net/ethernet/mellanox/mlxsw/spectrum_kvdl.o: In function `mlxsw_sp_kvdl_init':
      spectrum_kvdl.c:(.text+0x51c): undefined reference to `__aeabi_uldivmod'
      
      We could probably use a 32-bit division here as before, but since this is
      not in a performance critical path, div_u64() seems cleaner here.
      
      Fixes: 887839e6 ("mlxsw: spectrum_kvdl: Add support for dynamic partition set")
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Acked-by: default avatarArkadi Sharshevsky <arkadis@mellanox.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b89c7695
    • David S. Miller's avatar
      Merge branch 'mv88e6xxx-Poll-when-no-interrupt-defined' · 25ab47ef
      David S. Miller authored
      Andrew Lunn says:
      
      ====================
      mv88e6xxx: Poll when no interrupt defined
      
      Not all boards using the mv88e6xxx switches have the interrupt output
      connected to a GPIO. On these boards phylib has to poll the PHYs,
      rather than use interrupts. Have the driver poll the interrupt status
      register, which is more efficient than having phylib do it. And it
      enables other switch interrupts to be services.
      
      The Armada 370RD is such a board without a interrupt GPIO. Now that
      interrupts work, wire up the PHYs to make use if them.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      25ab47ef
    • Andrew Lunn's avatar
      arm: mvebu: 370-rd: Enable PHY interrupt handling · f8c193ca
      Andrew Lunn authored
      The Ethernet switch has an embedded interrupt controller. Interrupts
      from the embedded PHYs are part of this interrupt controller.
      Explicitly list the MDIO bus the embedded PHYs are on, and wire up the
      interrupts.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f8c193ca
    • Andrew Lunn's avatar
      net: dsa: mv88e6xxx: Poll when no interrupt defined · 294d711e
      Andrew Lunn authored
      Not all boards have the interrupt output from the switch connected to
      a GPIO line. In such cases, phylib has to poll the internal PHYs,
      rather than receive an interrupt when there is a change in the link
      state. phylib polls once per second, and per PHY reads around 4
      words. With a switch typically having 4 internal PHYs, this means 16
      MDIO transactions per second.
      
      Rather than performing this phylib level polling, have the driver poll
      the interrupt status register. If the status register indicates an
      interrupt condition processing of interrupts in the same way as if a
      GPIO was used.
      
      Polling 10 times a second places less load on the MDIO bus. But rather
      than taking on average 0.5s to detect a link change, it takes less
      than 0.05s. Additionally, other interrupts, such as the watchdog, ATU
      and VTU violations will be reported.
      Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      294d711e
    • Ido Schimmel's avatar
      mlxsw: spectrum_switchdev: Allow port enslavement to a VLAN-unaware bridge · 65b53bfd
      Ido Schimmel authored
      Up until now we only allowed VLAN devices to be put in a VLAN-unaware
      bridge, but some users need the ability to enslave physical ports as
      well.
      
      This is achieved by mapping the port and VID 1 to the bridge's vFID,
      instead of the port and the VID used by the VLAN device.
      
      The above is valid because as long as the port is not enslaved to a
      bridge, VID 1 is guaranteed to be configured as PVID and egress
      untagged.
      Signed-off-by: default avatarIdo Schimmel <idosch@mellanox.com>
      Signed-off-by: default avatarJiri Pirko <jiri@mellanox.com>
      Tested-by: default avatarDavid Ahern <dsahern@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      65b53bfd
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next · ba6056a4
      David S. Miller authored
      Daniel Borkmann says:
      
      ====================
      pull-request: bpf-next 2018-02-26
      
      The following pull-request contains BPF updates for your *net-next* tree.
      
      The main changes are:
      
      1) Various improvements for BPF kselftests: i) skip unprivileged tests
         when kernel.unprivileged_bpf_disabled sysctl knob is set, ii) count
         the number of skipped tests from unprivileged, iii) when a test case
         had an unexpected error then print the actual but also the unexpected
         one for better comparison, from Joe.
      
      2) Add a sample program for collecting CPU state statistics with regards
         to how long the CPU resides in cstate and pstate levels. Based on
         cpu_idle and cpu_frequency trace points, from Leo.
      
      3) Various x64 BPF JIT optimizations to further shrink the generated
         image size in order to make it more icache friendly. When tested on
         the Cilium generated programs, image size reduced by approx 4-5% in
         best case mainly due to how LLVM emits unsigned 32 bit constants,
         from Daniel.
      
      4) Improvements and fixes on the BPF sockmap sample programs: i) fix
         the sockmap's Makefile to include nlattr.o for libbpf, ii) detach
         the sock ops programs from the cgroup before exit, from Prashant.
      
      5) Avoid including xdp.h in filter.h by just forward declaring the
         struct xdp_rxq_info in filter.h, from Jesper.
      
      6) Fix the BPF kselftests Makefile for cgroup_helpers.c by only declaring
         it a dependency for test_dev_cgroup.c but not every other test case
         where it is not needed, from Jesper.
      
      7) Adjust rlimit RLIMIT_MEMLOCK for test_tcpbpf_user selftest since the
         default is insufficient for creating the 'global_map' used in the
         corresponding BPF program, from Yonghong.
      
      8) Likewise, for the xdp_redirect sample, Tushar ran into the same when
         invoking xdp_redirect and xdp_monitor at the same time, therefore
         in order to have the sample generically work bump the limit here,
         too. Fix from Tushar.
      
      9) Avoid an unnecessary NULL check in BPF_CGROUP_RUN_PROG_INET_SOCK()
         since sk is always guaranteed to be non-NULL, from Yafang.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ba6056a4
    • Leo Yan's avatar
      samples/bpf: Add program for CPU state statistics · c5350777
      Leo Yan authored
      CPU is active when have running tasks on it and CPUFreq governor can
      select different operating points (OPP) according to different workload;
      we use 'pstate' to present CPU state which have running tasks with one
      specific OPP.  On the other hand, CPU is idle which only idle task on
      it, CPUIdle governor can select one specific idle state to power off
      hardware logics; we use 'cstate' to present CPU idle state.
      
      Based on trace events 'cpu_idle' and 'cpu_frequency' we can accomplish
      the duration statistics for every state.  Every time when CPU enters
      into or exits from idle states, the trace event 'cpu_idle' is recorded;
      trace event 'cpu_frequency' records the event for CPU OPP changing, so
      it's easily to know how long time the CPU stays in the specified OPP,
      and the CPU must be not in any idle state.
      
      This patch is to utilize the mentioned trace events for pstate and
      cstate statistics.  To achieve more accurate profiling data, the program
      uses below sequence to insure CPU running/idle time aren't missed:
      
      - Before profiling the user space program wakes up all CPUs for once, so
        can avoid to missing account time for CPU staying in idle state for
        long time; the program forces to set 'scaling_max_freq' to lowest
        frequency and then restore 'scaling_max_freq' to highest frequency,
        this can ensure the frequency to be set to lowest frequency and later
        after start to run workload the frequency can be easily to be changed
        to higher frequency;
      
      - User space program reads map data and update statistics for every 5s,
        so this is same with other sample bpf programs for avoiding big
        overload introduced by bpf program self;
      
      - When send signal to terminate program, the signal handler wakes up
        all CPUs, set lowest frequency and restore highest frequency to
        'scaling_max_freq'; this is exactly same with the first step so
        avoid to missing account CPU pstate and cstate time during last
        stage.  Finally it reports the latest statistics.
      
      The program has been tested on Hikey board with octa CA53 CPUs, below
      is one example for statistics result, the format mainly follows up
      Jesper Dangaard Brouer suggestion.
      
      Jesper reminds to 'get printf to pretty print with thousands separators
      use %' and setlocale(LC_NUMERIC, "en_US")', tried three different arm64
      GCC toolchains (5.4.0 20160609, 6.2.1 20161016, 6.3.0 20170516) but all
      of them cannot support printf flag character %' on arm64 platform, so go
      back print number without grouping mode.
      
      CPU states statistics:
      state(ms)  cstate-0    cstate-1    cstate-2    pstate-0    pstate-1    pstate-2    pstate-3    pstate-4
      CPU-0      767         6111        111863      561         31          756         853         190
      CPU-1      241         10606       107956      484         125         646         990         85
      CPU-2      413         19721       98735       636         84          696         757         89
      CPU-3      84          11711       79989       17516       909         4811        5773        341
      CPU-4      152         19610       98229       444         53          649         708         1283
      CPU-5      185         8781        108697      666         91          671         677         1365
      CPU-6      157         21964       95825       581         67          566         684         1284
      CPU-7      125         15238       102704      398         20          665         786         1197
      
      Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
      Cc: Vincent Guittot <vincent.guittot@linaro.org>
      Signed-off-by: default avatarLeo Yan <leo.yan@linaro.org>
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      c5350777
  2. 24 Feb, 2018 8 commits
  3. 23 Feb, 2018 10 commits
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 9cb9c07d
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh.
      
       2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang.
      
       3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song.
      
       4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang.
      
       5) Fix potential deadlocks in netfilter getsockopt() code paths, from
          Paolo Abeni.
      
       6) Netfilter stackpointer size checks really are needed to validate
          user input, from Florian Westphal.
      
       7) Missing timer init in x_tables, from Paolo Abeni.
      
       8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg.
      
       9) When an ibmvnic device is brought down then back up again, it can be
          sent queue entries from a previous session, handle this properly
          instead of crashing. From Thomas Falcon.
      
      10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman.
      
      11) When we are dumping filters in cls_api, the output SKB is empty, and
          the filter we are dumping is too large for the space in the SKB, we
          should return -EMSGSIZE like other netlink dump operations do.
          Otherwise userland has no signal that is needs to increase the size
          of its read buffer. From Roman Kapl.
      
      12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer.
      
      13) Module refcount leak in netlink when a dump start fails, from Jason
          Donenfeld.
      
      14) Handle sub-optimal GSO sizes better in TCP BBR congestion control,
          from Eric Dumazet.
      
      15) Releasing bpf per-cpu arraymaps can take a long time, add a
          condtional scheduling point. From Eric Dumazet.
      
      16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From
          Daniel Borkmann.
      
      17) Fix page leak in gianfar driver, from Andy Spencer.
      
      18) Missed clearing of estimator scratch buffer, from Eric Dumazet.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
        net_sched: gen_estimator: fix broken estimators based on percpu stats
        gianfar: simplify FCS handling and fix memory leak
        ipv6 sit: work around bogus gcc-8 -Wrestrict warning
        macvlan: fix use-after-free in macvlan_common_newlink()
        bpf, arm64: fix out of bounds access in tail call
        bpf, x64: implement retpoline for tail call
        rxrpc: Fix send in rxrpc_send_data_packet()
        net: aquantia: Fix error handling in aq_pci_probe()
        bpf: fix rcu lockdep warning for lpm_trie map_free callback
        bpf: add schedule points in percpu arrays management
        regulatory: add NUL to request alpha2
        ibmvnic: Fix early release of login buffer
        net/smc9194: Remove bogus CONFIG_MAC reference
        net: ipv4: Set addr_type in hash_keys for forwarded case
        tcp_bbr: better deal with suboptimal GSO
        smsc75xx: fix smsc75xx_set_features()
        netlink: put module reference if dump start fails
        selftests/bpf/test_maps: exit child process without error in ENOMEM case
        selftests/bpf: update gitignore with test_libbpf_open
        selftests/bpf: tcpbpf_kern: use in6_* macros from glibc
        ..
      9cb9c07d
    • Linus Torvalds's avatar
      Merge branch 'fixes-v4.16-rc3' of... · 2eb02aa9
      Linus Torvalds authored
      Merge branch 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
      
      Pull security subsystem fixes from James Morris:
      
       - keys fixes via David Howells:
            "A collection of fixes for Linux keyrings, mostly thanks to Eric
             Biggers:
      
              - Fix some PKCS#7 verification issues.
      
              - Fix handling of unsupported crypto in X.509.
      
              - Fix too-large allocation in big_key"
      
       - Seccomp updates via Kees Cook:
            "These are fixes for the get_metadata interface that landed during
             -rc1. While the new selftest is strictly not a bug fix, I think
             it's in the same spirit of avoiding bugs"
      
       - an IMA build fix from Randy Dunlap
      
      * 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
        integrity/security: fix digsig.c build error with header file
        KEYS: Use individual pages in big_key for crypto buffers
        X.509: fix NULL dereference when restricting key with unsupported_sig
        X.509: fix BUG_ON() when hash algorithm is unsupported
        PKCS#7: fix direct verification of SignerInfo signature
        PKCS#7: fix certificate blacklisting
        PKCS#7: fix certificate chain verification
        seccomp: add a selftest for get_metadata
        ptrace, seccomp: tweak get_metadata behavior slightly
        seccomp, ptrace: switch get_metadata types to arch independent
      2eb02aa9
    • Linus Torvalds's avatar
      Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux · 65738c6b
      Linus Torvalds authored
      Pull arm64 fixes from Catalin Marinas:
       "arm64 and perf fixes:
      
         - build error when accessing MPIDR_HWID_BITMASK from .S
      
         - fix CTR_EL0 field definitions
      
         - remove/disable some kernel messages on user faults (unhandled
           signals, unimplemented syscalls)
      
         - fix kernel page fault in unwind_frame() with function graph tracing
      
         - fix perf sleeping while atomic errors when booting with ACPI"
      
      * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
        arm64: fix unwind_frame() for filtered out fn for function graph tracing
        arm64: Enforce BBM for huge IO/VMAP mappings
        arm64: perf: correct PMUVer probing
        arm_pmu: acpi: request IRQs up-front
        arm_pmu: note IRQs and PMUs per-cpu
        arm_pmu: explicitly enable/disable SPIs at hotplug
        arm_pmu: acpi: check for mismatched PPIs
        arm_pmu: add armpmu_alloc_atomic()
        arm_pmu: fold platform helpers into platform code
        arm_pmu: kill arm_pmu_platdata
        ARM: ux500: remove PMU IRQ bouncer
        arm64: __show_regs: Only resolve kernel symbols when running at EL1
        arm64: Remove unimplemented syscall log message
        arm64: Disable unhandled signal log messages by default
        arm64: cpufeature: Fix CTR_EL0 field definitions
        arm64: uaccess: Formalise types for access_ok()
        arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files
      65738c6b
    • Linus Torvalds's avatar
      Merge tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips · 2bd06ce7
      Linus Torvalds authored
      Pull MIPS fix from James Hogan:
       "A single MIPS fix for mismatching struct compat_flock, resulting in
        bus errors starting Firefox on Debian 8 since 4.13"
      
      * tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips:
        MIPS: Drop spurious __unused in struct compat_flock
      2bd06ce7
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk · 13f514be
      Linus Torvalds authored
      Pull printk fixlet from Petr Mladek:
       "People expect to see the real pointer value for %px.
      
        Let's substitute '(null)' only for the other %p? format modifiers that
        need to deference the pointer"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
        vsprintf: avoid misleading "(null)" for %px
      13f514be
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · 938e1426
      Linus Torvalds authored
      Pull i2c fixes from Wolfram Sang:
       "Two bugfixes, one v4.16 regression fix, and two documentation fixes"
      
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: designware: Consider SCL GPIO optional
        i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula".
        i2c: bcm2835: Set up the rising/falling edge delays
        i2c: i801: Add missing documentation entries for Braswell and Kaby Lake
        i2c: designware: must wait for enable
      938e1426
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 170e07bf
      Linus Torvalds authored
      Pull SCSI fixes from James Bottomley:
       "These are mostly fixes for problems with merge window code.
      
        In addition we have one doc update (alua) and two dead code removals
        (aiclib and octogon) a spurious assignment removal (csiostor) and a
        performance improvement for storvsc involving better interrupt
        spreading and increasing the command per lun handling"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        scsi: qla4xxx: skip error recovery in case of register disconnect.
        scsi: aacraid: fix shutdown crash when init fails
        scsi: qedi: Cleanup local str variable
        scsi: qedi: Fix truncation of CHAP name and secret
        scsi: qla2xxx: Fix incorrect handle for abort IOCB
        scsi: qla2xxx: Fix double free bug after firmware timeout
        scsi: storvsc: Increase cmd_per_lun for higher speed devices
        scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els()
        scsi: scsi_dh: Document alua_rtpg_queue() arguments
        scsi: Remove Makefile entry for oktagon files
        scsi: aic7xxx: remove aiclib.c
        scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion()
        scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo()
        scsi: sym53c8xx_2: iterator underflow in sym_getsync()
        scsi: bnx2fc: Fix check in SCSI completion handler for timed out request
        scsi: csiostor: remove redundant assignment to pointer 'ln'
        scsi: ufs: Enable quirk to ignore sending WRITE_SAME command
        scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info
        scsi: qla2xxx: Fix memory corruption during hba reset test
        scsi: mpt3sas: fix an out of bound write
      170e07bf
    • Donald Sharp's avatar
      net: fib_rules: Add new attribute to set protocol · 1b71af60
      Donald Sharp authored
      For ages iproute2 has used `struct rtmsg` as the ancillary header for
      FIB rules and in the process set the protocol value to RTPROT_BOOT.
      Until ca56209a66 ("net: Allow a rule to track originating protocol")
      the kernel rules code ignored the protocol value sent from userspace
      and always returned 0 in notifications. To avoid incompatibility with
      existing iproute2, send the protocol as a new attribute.
      
      Fixes: cac56209 ("net: Allow a rule to track originating protocol")
      Signed-off-by: default avatarDonald Sharp <sharpd@cumulusnetworks.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1b71af60
    • Linus Torvalds's avatar
      Merge tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux · 8961ca44
      Linus Torvalds authored
      Pull drm fixes from Dave Airlie:
       "A bunch of fixes for rc3:
      
        Exynos:
         - fixes for using monotonic timestamps
         - register definitions
         - removal of unused file
      
        ipu-v3L
         - minor changes
         - make some register arrays const+static
         - fix some leaks
      
        meson:
         - fix for vsync
      
        atomic:
         - fix for memory leak
      
        EDID parser:
         - add quirks for some more non-desktop devices
         - 6-bit panel fix.
      
        drm_mm:
         - fix a bug in the core drm mm hole handling
      
        cirrus:
         - fix lut loading regression
      
        Lastly there is a deadlock fix around runtime suspend for secondary
        GPUs.
      
        There was a deadlock between one thread trying to wait for a workqueue
        job to finish in the runtime suspend path, and the workqueue job it
        was waiting for in turn waiting for a runtime_get_sync to return.
      
        The fixes avoids it by not doing the runtime sync in the workqueue as
        then we always wait for all those tasks to complete before we runtime
        suspend"
      
      * tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits)
        drm/tve200: fix kernel-doc documentation comment include
        drm/edid: quirk Sony PlayStation VR headset as non-desktop
        drm/edid: quirk Windows Mixed Reality headsets as non-desktop
        drm/edid: quirk Oculus Rift headsets as non-desktop
        drm/meson: fix vsync buffer update
        drm: Handle unexpected holes in color-eviction
        drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1
        drm/exynos: remove exynos_drm_rotator.h
        drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions
        drm/exynos: fix comparison to bitshift when dealing with a mask
        drm/exynos: g2d: use monotonic timestamps
        drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA
        gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg
        gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image
        gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle
        gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle
        drm/amdgpu: Fix deadlock on runtime suspend
        drm/radeon: Fix deadlock on runtime suspend
        drm/nouveau: Fix deadlock on runtime suspend
        drm: Allow determining if current task is output poll worker
        ...
      8961ca44
    • Willem de Bruijn's avatar
      selftests/net: ignore background traffic in psock_fanout · cc30c93f
      Willem de Bruijn authored
      The packet fanout test generates UDP traffic and reads this with
      a pair of packet sockets, testing the various fanout algorithms.
      
      Avoid non-determinism from reading unrelated background traffic.
      Fanout decisions are made before unrelated packets can be dropped with
      a filter, so that is an insufficient strategy [*]. Run the packet
      socket tests in a network namespace, similar to msg_zerocopy.
      
      It it still good practice to install a filter on a packet socket
      before accepting traffic. Because this is example code, demonstrate
      that pattern. Open the socket initially bound to no protocol, install
      a filter, and only then bind to ETH_P_IP.
      
      Another source of non-determinism is hash collisions in FANOUT_HASH.
      The hash function used to select a socket in the fanout group includes
      the pseudorandom number hashrnd, which is not visible from userspace.
      To work around this, the test tries to find a pair of UDP source ports
      that do not collide. It gives up too soon (5 times, every 32 runs) and
      output is confusing. Increase tries to 20 and revise the error msg.
      
      [*] another approach would be to add a third socket to the fanout
          group and direct all unexpected traffic here. This is possible
          only when reimplementing methods like RR or HASH alongside this
          extra catch-all bucket, using the BPF fanout method.
      Signed-off-by: default avatarWillem de Bruijn <willemb@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cc30c93f