- 23 Mar, 2018 1 commit
-
-
Christoph Hellwig authored
Otherwise this causes unused symbol warnings for configs that build swiotlb.c only for use by xen-swiotlb.c and that don't otherwise select CONFIG_DMA_DIRECT_OPS, which is possible on arm. Fixes: 16e73adb ("dma/swiotlb: Remove swiotlb_{alloc,free}_coherent()") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: iommu@lists.linux-foundation.org Cc: konrad.wilk@oracle.com Link: https://lkml.kernel.org/r/20180323174930.17767-1-hch@lst.de
-
- 20 Mar, 2018 17 commits
-
-
Christoph Hellwig authored
Unused now that everyone uses swiotlb_{alloc,free}(). Tested-by:Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Christoph Hellwig authored
With that in place the generic DMA-direct routines can be used to allocate non-encrypted bounce buffers, and the x86 SEV case can use the generic swiotlb ops including nice features such as using CMA allocations. Note that I'm not too happy about using sev_active() in DMA-direct, but I couldn't come up with a good enough name for a wrapper to make it worth adding. Tested-by:
-
Christoph Hellwig authored
Give the basic phys_to_dma() and dma_to_phys() helpers a __-prefix and add the memory encryption mask to the non-prefixed versions. Use the __-prefixed versions directly instead of clearing the mask again in various places. Tested-by:
-
Christoph Hellwig authored
Now that set_memory_decrypted() is always available we can just call it directly. Tested-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by:
-
Christoph Hellwig authored
... to make these APIs more universally available. Tested-by:
-
Christoph Hellwig authored
All dma_ops implementations used on x86 now take care of setting their own required GFP_ masks for the allocation. And given that the common code now clears harmful flags itself that means we can stop the flags in all the IOMMU implementations as well. Tested-by:
-
Christoph Hellwig authored
Use the dma_direct_*() helpers and clean up the code flow. Tested-by:
-
Christoph Hellwig authored
This cleans up the code a lot by removing duplicate logic. Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Christoph Hellwig authored
This gains support for CMA allocations for the force_iommu case, and cleans up the code a bit. Tested-by:
-
Christoph Hellwig authored
We want to phase out looking at the magic GFP_DMA flag in the DMA mapping routines, so switch the gart driver to use the dev->coherent_dma_mask instead, which is used to select the GFP_DMA flag in the caller. Tested-by:
-
Christoph Hellwig authored
The generic swiotlb DMA ops were based on the x86 ones and provide equivalent functionality, so use them. Also fix the sta2x11 case. For that SOC the DMA map ops need an additional physical to DMA address translations. For swiotlb buffers that is done throught the phys_to_dma helper, but the sta2x11_dma_ops also added an additional translation on the return value from x86_swiotlb_alloc_coherent, which is only correct if that functions returns a direct allocation and not a swiotlb buffer. With the generic swiotlb and DMA-direct code phys_to_dma is not always used and the separate sta2x11_dma_ops can be replaced with a simple bit that marks if the additional physical to DMA address translation is needed. Tested-by:
-
Christoph Hellwig authored
The generic DMA-direct (CONFIG_DMA_DIRECT_OPS=y) implementation is now functionally equivalent to the x86 nommu dma_map implementation, so switch over to using it. That includes switching from using x86_dma_supported in various IOMMU drivers to use dma_direct_supported instead, which provides the same functionality. Tested-by:
-
Christoph Hellwig authored
These days all devices (including the ISA fallback device) have a coherent DMA mask set, so remove the workaround. Tested-by:
-
Ingo Molnar authored
Signed-off-by: -
Christoph Hellwig authored
There were only a few Pentium Pro multiprocessors systems where this errata applied. They are more than 20 years old now, and we've slowly dropped places which put the workarounds in and discouraged anyone from enabling the workaround. Get rid of it for good. Tested-by:
-
H.J. Lu authored
Since the x86-64 kernel must be aligned to 2MB, refuse to boot the kernel if the alignment of the LOAD segment isn't a multiple of 2MB. Signed-off-by:
H.J. Lu <hjl.tools@gmail.com> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CAMe9rOrR7xSJgUfiCoZLuqWUwymRxXPoGBW38%2BpN%3D9g%2ByKNhZw@mail.gmail.comSigned-off-by:
-
H.J. Lu authored
Binutils 2.31 will enable -z separate-code by default for x86 to avoid mixing code pages with data to improve cache performance as well as security. To reduce x86-64 executable and shared object sizes, the maximum page size is reduced from 2MB to 4KB. But x86-64 kernel must be aligned to 2MB. Pass -z max-page-size=0x200000 to linker to force 2MB page size regardless of the default page size used by linker. Tested with Linux kernel 4.15.6 on x86-64. Signed-off-by:
-
- 19 Mar, 2018 1 commit
-
-
Andy Lutomirski authored
glibc keeps getting cleverer, and my version now turns raise() into more than one syscall. Since the test relies on ptrace seeing an exact set of syscalls, this breaks the test. Replace raise(SIGSTOP) with syscall(SYS_tgkill, ...) to force glibc to get out of our way. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kselftest@vger.kernel.org Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/bc80338b453afa187bc5f895bd8e2c8d6e264da2.1521300271.git.luto@kernel.orgSigned-off-by:
-
- 16 Mar, 2018 3 commits
-
-
Borislav Petkov authored
Emanuel reported an issue with a hang during microcode update because my dumb idea to use one atomic synchronization variable for both rendezvous - before and after update - was simply bollocks: microcode: microcode_reload_late: late_cpus: 4 microcode: __reload_late: cpu 2 entered microcode: __reload_late: cpu 1 entered microcode: __reload_late: cpu 3 entered microcode: __reload_late: cpu 0 entered microcode: __reload_late: cpu 1 left microcode: Timeout while waiting for CPUs rendezvous, remaining: 1 CPU1 above would finish, leave and the others will still spin waiting for it to join. So do two synchronization atomics instead, which makes the code a lot more straightforward. Also, since the update is serialized and it also takes quite some time per microcode engine, increase the exit timeout by the number of CPUs on the system. That's ok because the moment all CPUs are done, that timeout will be cut short. Furthermore, panic when some of the CPUs timeout when returning from a microcode update: we can't allow a system with not all cores updated. Also, as an optimization, do not do the exit sync if microcode wasn't updated. Reported-by:
Emanuel Czirai <xftroxgpx@protonmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Ashok Raj <ashok.raj@intel.com> Tested-by:
-
Borislav Petkov authored
Return UCODE_NEW from the scanning functions to denote that new microcode was found and only then attempt the expensive synchronization dance. Reported-by:
-
Alexander Sergeyev authored
In accordance with Intel's microcode revision guidance from March 6 MCU rev 0xc2 is cleared on both Skylake H/S and Skylake Xeon E3 processors that share CPUID 506E3. Signed-off-by:
Alexander Sergeyev <sergeev917@gmail.com> Signed-off-by:
-
- 15 Mar, 2018 1 commit
-
-
Toshi Kani authored
vmalloc_fault() sets user's pgd or p4d from the kernel page table. Once it's set, all tables underneath are identical. There is no point of following the same page table with two separate pointers and make sure they see the same with BUG(). Remove the pointless checks in vmalloc_fault(). Also rename the kernel pgd/p4d pointers to pgd_k/p4d_k so that their names are consistent in the file. Suggested-by:
Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
-
- 14 Mar, 2018 7 commits
-
-
Thomas Gleixner authored
-
Toshi Kani authored
Gratian Crisan reported that vmalloc_fault() crashes when CONFIG_HUGETLBFS is not set since the function inadvertently uses pXn_huge(), which always return 0 in this case. ioremap() does not depend on CONFIG_HUGETLBFS. Fix vmalloc_fault() to call pXd_large() instead. Fixes: f4eafd8b ("x86/mm: Fix vmalloc_fault() to handle large pages properly") Reported-by:
Gratian Crisan <gratian.crisan@ni.com> Signed-off-by:
-
Josh Poimboeuf authored
The kbuild test robot reported the following warning on sparc64: kernel/jump_label.c: In function '__jump_label_update': kernel/jump_label.c:376:51: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] WARN_ONCE(1, "can't patch jump_label at %pS", (void *)entry->code); On sparc64, the jump_label entry->code field is of type u32, but pointers are 64-bit. Silence the warning by casting entry->code to an unsigned long before casting it to a pointer. This is also what the sparc jump label code does. Fixes: dc1dd184 ("jump_label: Warn on failed jump_label patching attempt") Reported-by:kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Andy Whitcroft authored
In the following commit: 9e0e3c51 ("x86/speculation, objtool: Annotate indirect calls/jumps for objtool") ... we added annotations for CALL_NOSPEC/JMP_NOSPEC on 64-bit x86 kernels, but we did not annotate the 32-bit path. Annotate it similarly. Signed-off-by:
Andy Whitcroft <apw@canonical.com> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20180314112427.22351-1-apw@canonical.comSigned-off-by:
-
Andy Lutomirski authored
POPF would trap if VIP was set regardless of whether IF was set. Fix it. Suggested-by:
Stas Sergeev <stsp@list.ru> Reported-by:
Bart Oldeman <bartoldeman@gmail.com> Signed-off-by:
-
Andy Lutomirski authored
POPF is currently broken -- add tests to catch the error. This results in: [RUN] POPF with VIP set and IF clear from vm86 mode [INFO] Exited vm86 mode due to STI [FAIL] Incorrect return reason (started at eip = 0xd, ended at eip = 0xf) because POPF currently fails to check IF before reporting a pending interrupt. This patch also makes the FAIL message a bit more informative. Reported-by:
-
Andy Lutomirski authored
Fix a logic error that caused the test to exit with 0 even if test cases failed. Signed-off-by:
-
- 12 Mar, 2018 10 commits
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Hightlights include the following stable fixes: - NFS: Fix an incorrect type in struct nfs_direct_req - pNFS: Prevent the layout header refcount going to zero in pnfs_roc() - NFS: Fix unstable write completion" * tag 'nfs-for-4.16-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix unstable write completion pNFS: Prevent the layout header refcount going to zero in pnfs_roc() NFS: Fix an incorrect type in struct nfs_direct_req -
Andy Shevchenko authored
When switching to ACPI HW reduced platforms we still want to initialize timers. Override x86_init.acpi.reduced_hw_init to achieve that. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-acpi@vger.kernel.org Link: http://lkml.kernel.org/r/20180220180506.65523-3-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
Some ACPI hardware reduced platforms need to initialize certain devices defined by the ACPI hardware specification even though in principle those devices should not be present in an ACPI hardware reduced platform. To allow that to happen, make it possible to override the generic x86_init callbacks and provide a custom legacy_pic value, add a new ->reduced_hw_early_init() callback to struct x86_init_acpi and make acpi_reduced_hw_init() use it. Signed-off-by:
-
Andy Shevchenko authored
This is a preparation patch to allow override the hardware reduced initialization on ACPI enabled platforms. No functional change intended. Signed-off-by:
-
Kirill A. Shutemov authored
MKTME_KEY_PROG allows to manipulate MKTME keys in the CPU. Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Kai Huang <kai.huang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20180305162610.37510-6-kirill.shutemov@linux.intel.comSigned-off-by:
-
Kirill A. Shutemov authored
Intel PCONFIG targets are enumerated via new CPUID leaf 0x1b. This patch detects all supported targets of PCONFIG and implements helper to check if the target is supported. Signed-off-by:
-
Kirill A. Shutemov authored
IA32_TME_ACTIVATE MSR (0x982) can be used to check if BIOS has enabled TME and MKTME. It includes which encryption policy/algorithm is selected for TME or available for MKTME. For MKTME, the MSR also enumerates how many KeyIDs are available. We would need to exclude KeyID bits from physical address bits. detect_tme() would adjust cpuinfo_x86::x86_phys_bits accordingly. We have to do this even if we are not going to use KeyID bits ourself. VM guests still have to know that these bits are not usable for physical address. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by: -
Kirill A. Shutemov authored
CPUID.0x7.0x0:EDX[18] indicates whether Intel CPU support PCONFIG instruction. Signed-off-by:
-
Kirill A. Shutemov authored
CPUID.0x7.0x0:ECX[13] indicates whether CPU supports Intel Total Memory Encryption. Signed-off-by:
-
