- 26 May, 2015 6 commits
-
-
Hannes Reinecke authored
These definitions are only ever used for the wide-scsi board, so they should be prefixed with 'ADV', not 'ASC'. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com>
-
Hannes Reinecke authored
Was uncommented in the original driver, and I'm too lazy to figure out the conversion. Signed-off-by:
-
Hannes Reinecke authored
Removed unused structure ASC_SCSI_REQ_Q and update the comments to 'ADV_SCSI_REQ_Q'. Signed-off-by:
-
Hannes Reinecke authored
The 'data_addr' field is accessed by the board, and needs to be kept in little endian format. Signed-off-by:
-
Hannes Reinecke authored
Signed-off-by:
-
Hannes Reinecke authored
AscIsrChipHalted will only ever return '0', so make it a void function. Signed-off-by:
-
- 25 May, 2015 34 commits
-
-
Hannes Reinecke authored
Signed-off-by:
-
Hannes Reinecke authored
Use 'bool' type instead. Signed-off-by:
-
Hannes Reinecke authored
No point in defining our own. Signed-off-by:
-
Hannes Reinecke authored
Signed-off-by:
-
Hannes Reinecke authored
The sg elements should be allocated from a dma pool. And rename the structure to 'adv_sg_block' as they are only used by the wide board. Signed-off-by:
-
Hannes Reinecke authored
Signed-off-by:
-
Hannes Reinecke authored
Signed-off-by:
-
Hannes Reinecke authored
Signed-off-by:
-
Hannes Reinecke authored
Convert to use a shared host tag map for command lookup. This saves us having an internal structure and avoid the command pointer abuse. Signed-off-by:
-
Hannes Reinecke authored
The advansys_reset() function is actually a host reset, not a bus reset. And there is no need to have a 'last_reset' value; the same value exists in struct Scsi_Host. Signed-off-by:
-
Christoph Hellwig authored
T10 PI is just another optional feature, LLDDs should work without the infrastructure. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Paolo Bonzini <pbonzini@redhat.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
John Soni Jose authored
Bump the driver version [jejb: resolve conflict with 4627de93 MAINTAINERS, be2iscsi: change email domain] Signed-off-by:
John Soni Jose <sony.john-n@emulex.com> Signed-off-by:
Jayamohan Kallickal <jayamohan.kallickal@emulex.com> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
-
John Soni Jose authored
Once be2iscsi driver is loaded and operational close Boot session established by FW. Signed-off-by:
-
John Soni Jose authored
Check DMA memory before it is unmapped. Signed-off-by:
-
John Soni Jose authored
Driver was not freeing the DMA memory allocated for EQ/CQ in the unload path. This patch frees the DMA memory during the driver unload. Signed-off-by:
-
John Soni Jose authored
Reserve device PCI I/O and Memory resources. Signed-off-by:
-
John Soni Jose authored
Increment the retry count to get the boot target info when port async event is received by the driver. Update sysfs enteries with the boot target parameters. Signed-off-by:
Minh Tran <minhduc.tran@emulex.com> Signed-off-by:
-
Christoph Hellwig authored
Swap the whole 32 bits we read from the hardware instead of swapping just the 16bits we care about in place later. Signed-off-by:
Sumit Saxena <sumit.saxena@avagotech.com> Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Christoph Hellwig authored
The fusion HBAs don't really use the instance template like the other variants, as it branches off at a much higher level. So instead of trying to squeeze megasas_fire_cmd_fusion into the wrong calling convention call it locally with argument data types that match what is passed. [jejb: fix up 32 bit compile failure] Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
Converting structure fields in place is always a bad idea, and in this case by moving it into the only caller we also only have to do a single byte swap as most fields of this structure are never used. Signed-off-by:
-
Christoph Hellwig authored
Add noop conversions for all ones to make sparse happy. Signed-off-by:
-
Christoph Hellwig authored
This adds endianness annotations to all data structures, and a few variables directly referencing them. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
kbuild test robot authored
drivers/scsi/megaraid/megaraid_sas_base.c:1701:6: sparse: symbol 'megasas_complete_outstanding_ioctls' was not declared. Should it be static? From: Christoph Hellwig <hch@lst.de> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
This patch will add support for Single Server High Availability(SSHA) cluster support. Here is the short decsription of changes done to add support for SSHA- 1) Host will send system's Unique ID based on DMI_PRODUCT_UUID to firmware. 2) Toggle the devhandle in LDIO path for Remote LDs. Signed-off-by:
Kashyap Desai <kashyap.desai@avagotech.com> Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
This patch will upgrade the driver version and add back the release date and sysfs hook for the same. Some internal applications uses sysfs parameter for release date, so they were broken because of removal of release date from sysfs. Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
megaraid_sas driver will use block layer provided tag for indexing internal MPT frames to get any unique MPT frame tied with tag. Each IO request submitted from SCSI mid layer will get associated MPT frame from MPT framepool (retrieved and return back using spinlock inside megaraid_sas driver's submission/completion call back). Getting MPT frame from MPT Frame pool is very expensive operation because of associated spin lock operation (spinlock overhead increase on multi NUMA node). This type of locking in driver is very expensive call considering each IO request need - Acquire and Release of the same lock. With this support, in IO path driver will directly provide the unique command index(which is based on block layer tag) and will get the MPT frame tied to the tag and this way driver can get rid off lock, which synchronizes the access to MPT frame pool while fetching and returning MPT frame from the pool. This support in driver provides siginificant performance improvement(on multi NUMA node system)on latest upstream with SCSI.MQ as well as on existing linux distributions. Here is the data for test executed at Avago- - IO Tool- FIO - 4 Socket SMC server. (4 NUMA node server) - 12 SSDs in JBOD mode . - 4K Rand READ, QD=32 - SCSI MQ x86_64 (Latest Upstream kernel) - upto 300% Performance Improvement. If IOs are running on single Node, perfromance gain is less, but as soon as increase number of nodes, performance improvement is significant. IOs running on all 4 NUMA nodes, with this patch applied IOPs observed was 1170K vs 344K IOPs seen without this patch. Logically, there are two parts of this patch- 1) Block layer tag support 2) changes in calling convention of return_cmd. part 2 will revert the changes done by patch- 90dc9d98 megaraid_sas : MFI MPT linked list corruption fix because changes done in part 1 has fixed the problem of MFI MPT linked list corruption. part 2 is very much dependent on part 1, so we decided to have single patch for these two logical changes. [jejb: remove chatty printk pointed out by hch] Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
Signed-off-by:
-
Sumit.Saxena@avagotech.com authored
This patch will add separate function for refiring MFI commands in Fusion adapters's OCR code. Signed-off-by:
-
