The driver has never used the netdev->{irq,base_addr,mem_start}
members, so this call is completely unnecessary.
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Heiner Kallweit says:

====================
ethtool: runtime-resume netdev parent before ethtool ops

If a network device is runtime-suspended then:
- network device may be flagged as detached and all ethtool ops (even if
  not accessing the device) will fail because netif_device_present()
  returns false
- ethtool ops may fail because device is not accessible (e.g. because being
  in D3 in case of a PCI device)

It may not be desirable that userspace can't use even simple ethtool ops
that not access the device if interface or link is down. To be more friendly
to userspace let's ensure that device is runtime-resumed when executing
ethtool ops in kernel.

This patch series covers the typical case that the netdev parent is power-
managed, e.g. a PCI device. Not sure whether cases exist where the netdev
itself is power-managed. If yes then we may need an extension for this.
But the series as-is at least shouldn't cause problems in that case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If a network device is runtime-suspended then:
- network device may be flagged as detached and all ethtool ops (even if not
  accessing the device) will fail because netif_device_present() returns
  false
- ethtool ops may fail because device is not accessible (e.g. because being
  in D3 in case of a PCI device)

It may not be desirable that userspace can't use even simple ethtool ops
that not access the device if interface or link is down. To be more friendly
to userspace let's ensure that device is runtime-resumed when executing the
respective ethtool op in kernel.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If device is runtime-suspended and not accessible then it may be
flagged as not present. If checking whether device is present is
done too early then we may bail out before we have the chance to
runtime-resume the device. Therefore move this check to
ethnl_ops_begin(). This is in preparation of a follow-up patch
that tries to runtime-resume the device before executing ethtool
ops.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation of subsequent extensions to both functions move the
implementations from netlink.h to netlink.c.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If a network device is runtime-suspended then:
- network device may be flagged as detached and all ethtool ops (even if not
  accessing the device) will fail because netif_device_present() returns
  false
- ethtool ops may fail because device is not accessible (e.g. because being
  in D3 in case of a PCI device)

It may not be desirable that userspace can't use even simple ethtool ops
that not access the device if interface or link is down. To be more friendly
to userspace let's ensure that device is runtime-resumed when executing the
respective ethtool op in kernel.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We ended up merging two versions of the same patch set:

commit 8fb7da9e ("virtio_net: get build_skb() buf by data ptr")
commit 5c37711d ("virtio-net: fix for unable to handle page fault for address")

into net, and

commit 7bf64460 ("virtio-net: get build_skb() buf by data ptr")
commit 6c66c147 ("virtio-net: fix for unable to handle page fault for address")

into net-next. Redo the merge from commit 12628565 ("Merge
ra.kernel.org:/pub/scm/linux/kernel/git/netdev/net"), so that
the most recent code remains.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michael Chan says:

====================
bnxt_en: Increase maximum RX ring size when jumbo ring is unused

The RX jumbo ring is automatically enabled when HW GRO/LRO is enabled or
when the MTU exceeds the page size.  The RX jumbo ring provides a lot
more RX buffer space when it is in use.  When the RX jumbo ring is not
in use, some users report that the current maximum of 2K buffers is
too limiting.  This patchset increases the maximum to 8K buffers when
the RX jumbo ring is not used.  The default RX ring size is unchanged
at 511.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current maximum RX ring size is defined assuming the RX jumbo ring
(aka aggregation ring) is used.  The RX jumbo ring is automicatically used
when the MTU exceeds a threshold or when rx-gro-hw/lro is enabled.  The RX
jumbo ring is automatically sized up to 4 times the size of the RX ring
size.

The BNXT_MAX_RX_DESC_CNT constant is the upper limit on the size of the
RX ring whether or not the RX jumbo ring is used.  Obviously, the
maximum amount of RX buffer space is significantly less when the RX jumbo
ring is not used.

To increase flexibility for the user who does not use the RX jumbo ring,
we now define a bigger maximum RX ring size when the RX jumbo ring is not
used.  The maximum RX ring size is now up to 8K when the RX jumbo ring
is not used.  The maximum completion ring size also needs to be scaled
up to accomodate the larger maximum RX ring size.

Note that when the RX jumbo ring is re-enabled, the RX ring size will
automatically drop if it exceeds the maximum.
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We currently store these page addresses and DMA addreses in static
arrays.  On systems with 4K pages, we support up to 64 pages per
completion ring.  The actual number of pages for each completion ring
may be much less than 64.  For example, when the RX ring size is set
to the default 511 entries, only 16 completion ring pages are needed
per ring.

In the next patch, we'll be doubling the maximum number of completion
pages.  So we convert to allocate these arrays as needed instead of
declaring them statically.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Those files under /proc/net/stat/ don't have vertical alignment, it looks
very difficult. Modify the seq_printf statement, keep vertical alignment.

v2:
 - Use seq_puts() and seq_printf() correctly.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add an option lacp_active, which is similar with team's runner.active.
This option specifies whether to send LACPDU frames periodically. If set
on, the LACPDU frames are sent along with the configured lacp_rate
setting. If set off, the LACPDU frames acts as "speak when spoken to".

Note, the LACPDU state frames still will be sent when init or unbind port.

v2: remove module parameter
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Duplicate include header file <linux/kernel.h>
line 4: #include <linux/kernel.h>
line 7: #include <linux/kernel.h>
Signed-off-by: zhouchuangao <zhouchuangao@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. The safe replacement is strscpy().
Signed-off-by: Len Baker <len.baker@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove redundant prints from the iWARP SYN handling.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device recovery flow will reset the entire HW device, in that case
the DORQ HW block attention is redundant.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid calling the qed doorbell recovery - qed_db_rec_handler()
during device recovery.
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vasily Averin says:

====================
skbuff: introduce skb_expand_head()

currently if skb does not have enough headroom skb_realloc_headrom is called.
It is not optimal because it creates new skb.

this patch set introduces new helper skb_expand_head()
Unlike skb_realloc_headroom, it does not allocate a new skb if possible;
copies skb->sk on new skb when as needed and frees original skb in case of failures.

This helps to simplify ip[6]_finish_output2(), ip6_xmit() and few other
functions in vrf, ax25 and bpf.

There are few other cases where this helper can be used
but it requires an additional investigations.

v3 changes:
 - ax25 compilation warning fixed
 - v5.14-rc4 rebase
 - now it does not depend on non-committed pathces

v2 changes:
 - helper's name was changed to skb_expand_head
 - fixed few mistakes inside skb_expand_head():
    skb_set_owner_w should set sk on nskb
    kfree was replaced by kfree_skb()
    improved warning message
 - added minor refactoring in changed functions in vrf and bpf patches
 - removed kfree_skb() in ax25_rt_build_path caller ax25_ip_xmit
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike skb_realloc_headroom, new helper skb_expand_head
does not allocate a new skb if possible.

Additionally this patch replaces commonly used dereferencing with variables.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use skb_expand_head() in ax25_transmit_buffer and ax25_rt_build_path.
Unlike skb_realloc_headroom, new helper does not allocate a new skb if possible.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike skb_realloc_headroom, new helper skb_expand_head
does not allocate a new skb if possible.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike skb_realloc_headroom, new helper skb_expand_head
does not allocate a new skb if possible.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike skb_realloc_headroom, new helper skb_expand_head
does not allocate a new skb if possible.

Additionally this patch replaces commonly used dereferencing with variables.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Unlike skb_realloc_headroom, new helper skb_expand_head does not allocate
a new skb if possible.

Additionally this patch replaces commonly used dereferencing with variables.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Like skb_realloc_headroom(), new helper increases headroom of specified skb.
Unlike skb_realloc_headroom(), it does not allocate a new skb if possible;
copies skb->sk on new skb when as needed and frees original skb in case
of failures.

This helps to simplify ip[6]_finish_output2() and a few other similar cases.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
This patch-set changes the TTC (Traffic Type Classification) logic
to be independent from the mlx5 ethernet driver by renaming the traffic
types enums and making the TTC API generic to the mlx5 core driver.

It allows to decouple TTC logic from mlx5e and reused by other parts
of mlx5 drivers, namely ADQ and lag TX steering hashing.

Patches overview:
1 - Rename traffic type enums to be mlx5 generic.
2 - Rename related TTC arguments and functions.
3 - Remove dependency in the mlx5e driver from the TTC implementation.
4 - Move TTC logic to fs_ttc.
5 - Embed struct mlx5_ttc_table in fs_ttc.

The refactoring series is followed by misc' cleanup patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The return value is missing in this code scenario, add the return value
'0' to the return value 'err'.

Eliminate the follow smatch warning:

drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c:3083
mlx5_devlink_eswitch_inline_mode_set() warn: missing error code 'err'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: 8e0aa4bc ("net/mlx5: E-switch, Protect eswitch mode changes")
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Instead of returning -EINVAL.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

counter is being initialized before being used.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Passing parse_attr is redundant in parse_tc_nic_actions() and
mlx5e_tc_add_nic_flow() as we can get it from flow.
This is the same as with parse_tc_fdb_actions() and mlx5e_tc_add_fdb_flow().
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cap is very old and today will always exists.
The cap is not being checked anywhere else. Remove the check from
drop action when parsing tc rules in nic mode.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

filter_dev is saved in parse_attr. and being used in other cases from
there. use it also for the leftover case.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Since the code changed to use the flow action infra
there is no usage of tcf values from those includes.
Remove those.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

mlx5_ttc_table struct shouldn't be exposed to the users so
this patch make it internal to ttc.

In addition add a getter function to get the TTC flow table for users
that need to add a rule which points on it.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>

Now that TTC logic is not dependent on mlx5e structs, move it to
lib/fs_ttc.c so it could be used other part of the mlx5 driver.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Remove dependency in the mlx5e driver from the TTC implementation
by changing the TTC related functions to receive mlx5 generic arguments.
It allows to decouple TTC logic from mlx5e and reused by other parts of
mlx5 driver.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Since TTC logic is going to be moved to a separate file, make the
relevant functions and arguments that used by TTC to be mlx5 generic.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Rename traffic type enums as part of the preparation for moving
the traffic type logic to a separate file.
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The channels array in struct mlx5e_rx_res is converted to a dynamic one,
which will use the dynamic value of max_nch instead of
implementation-defined maximum of MLX5E_MAX_NUM_CHANNELS.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This commit moves all implementation details of struct mlx5e_rx_res
under en/rx_res.c. All access to RX resources is now done using methods.
Encapsulating RX resources into an object allows for better
manageability, because all the implementation details are now in a
single place, and external code can use only a limited set of API
methods to init/teardown the whole thing, reconfigure RSS and LRO
parameters, connect TIRs to flow steering and activate/deactivate TIRs.

mlx5e_rx_res is self-contained and doesn't depend on struct mlx5e_priv
or include en.h.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>