- 30 Jul, 2021 17 commits
-
-
Salah Triki authored
Use swap() instead of implementing it in order to make code more clean. Signed-off-by: Salah Triki <salah.triki@gmail.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Mian Yousaf Kaukab authored
ecdsa_set_pub_key() makes an u64 pointer at 1 byte offset of the key. This results in an unaligned u64 pointer. This pointer is passed to ecc_swap_digits() which assumes natural alignment. This causes a kernel crash on an armv7 platform: [ 0.409022] Unhandled fault: alignment exception (0x001) at 0xc2a0a6a9 ... [ 0.416982] PC is at ecdsa_set_pub_key+0xdc/0x120 ... [ 0.491492] Backtrace: [ 0.492059] [<c07c266c>] (ecdsa_set_pub_key) from [<c07c75d4>] (test_akcipher_one+0xf4/0x6c0) Handle unaligned input buffer in ecc_swap_digits() by replacing be64_to_cpu() to get_unaligned_be64(). Change type of in pointer to void to reflect it doesn’t necessarily need to be aligned. Fixes: 4e660291 ("crypto: ecdsa - Add support for ECDSA signature verification") Reported-by: Guillaume Gardet <guillaume.gardet@arm.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Xiyu Yang authored
refcount_t type and corresponding API can protect refcounters from accidental underflow and overflow and further use-after-free situations. Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jason Wang authored
The kfree_sensitive is a kernel API to clear sensitive information that should not be leaked to other future users of the same memory objects and free the memory. Its function is the same as the combination of memzero_explicit and kfree. Thus, we can replace the combination APIs with the single kfree_sensitive API. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tudor Ambarus authored
Allocate the atmel_aes_dev data at tfm init time, and not for each crypt request. There's a single AES IP per SoC, clarify that in the code. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tudor Ambarus authored
XTS is supported just for input lengths with data units of 128-bit blocks. Add a fallback to software implementation when the last block is shorter than 128 bits. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tudor Ambarus authored
Set cra_blocksize to 1 to indicate OFB is a stream cipher. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tudor Ambarus authored
FIPS81 requires for the ECB, CBC, CFB, and OFB modes that the plaintext and ciphertext to have a positive integer length. Add this constraint and just return 0 for a zero length cryptlen. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tudor Ambarus authored
NIST 800-38A requires for the ECB, CBC, CFB, OFB and CTR modes that the plaintext and ciphertext to have a positive integer length. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tudor Ambarus authored
Input length smaller than block size does not make sense for XTS. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tudor Ambarus authored
NIST 800-38A requires for the ECB and CBC modes that the total number of bits in the plaintext to be a multiple of the block cipher. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tudor Ambarus authored
Downgrade all runtime error messages to dev_dbg so that we don't pollute the console. All probe error messages are kept with dev_err. Get rid of pr_err and use dev_dbg instead, so that we know from which device the error comes. dma_mapping_error() return code was overwritten, use the error code that the function returns. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tudor Ambarus authored
The tdes dev gets allocated to the tfm at alg->init time, there's no need to overwrite the pointer to tdes_dd afterwards. There's a single IP per SoC anyway, the first entry from the atmel_tdes.dev_list is chosen without counting for tfms for example, in case one thinks of an even distribution of tfms across the TDES IPs: there's only one. At alg->init time the ctx->dd should already be NULL, there's no need to check its value before requesting for a tdes dev. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tianjia Zhang authored
tcrypt supports testing of SM4 cipher algorithms that use avx instruction set acceleration. The implementation of sm4 instruction set acceleration supports up to 8 blocks in parallel encryption and decryption, which is 128 bytes. Therefore, the 128-byte block size is also added to block_sizes. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tianjia Zhang authored
This patch adds AES-NI/AVX/x86_64 assembler implementation of SM4 block cipher. Through two affine transforms, we can use the AES S-Box to simulate the SM4 S-Box to achieve the effect of instruction acceleration. The main algorithm implementation comes from SM4 AES-NI work by libgcrypt and Markku-Juhani O. Saarinen at: https://github.com/mjosaarinen/sm4ni This optimization supports the four modes of SM4, ECB, CBC, CFB, and CTR. Since CBC and CFB do not support multiple block parallel encryption, the optimization effect is not obvious. Benchmark on Intel Xeon Cascadelake, the data comes from the 218 mode and 518 mode of tcrypt. The abscissas are blocks of different lengths. The data is tabulated and the unit is Mb/s: sm4-generic | 16 64 128 256 1024 1420 4096 ECB enc | 40.99 46.50 48.05 48.41 49.20 49.25 49.28 ECB dec | 41.07 46.99 48.15 48.67 49.20 49.25 49.29 CBC enc | 37.71 45.28 46.77 47.60 48.32 48.37 48.40 CBC dec | 36.48 44.82 46.43 47.45 48.23 48.30 48.36 CFB enc | 37.94 44.84 46.12 46.94 47.57 47.46 47.68 CFB dec | 37.50 42.84 43.74 44.37 44.85 44.80 44.96 CTR enc | 39.20 45.63 46.75 47.49 48.09 47.85 48.08 CTR dec | 39.64 45.70 46.72 47.47 47.98 47.88 48.06 sm4-aesni-avx ECB enc | 33.75 134.47 221.64 243.43 264.05 251.58 258.13 ECB dec | 34.02 134.92 223.11 245.14 264.12 251.04 258.33 CBC enc | 38.85 46.18 47.67 48.34 49.00 48.96 49.14 CBC dec | 33.54 131.29 223.88 245.27 265.50 252.41 263.78 CFB enc | 38.70 46.10 47.58 48.29 49.01 48.94 49.19 CFB dec | 32.79 128.40 223.23 244.87 265.77 253.31 262.79 CTR enc | 32.58 122.23 220.29 241.16 259.57 248.32 256.69 CTR dec | 32.81 122.47 218.99 241.54 258.42 248.58 256.61 Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tianjia Zhang authored
SM4 library is abstracted from sm4-generic algorithm, sm4-ce can depend on the SM4 library instead of sm4-generic, and some functions in sm4-generic do not need to be exported. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Tianjia Zhang authored
Take the existing small footprint and mostly time invariant C code and turn it into a SM4 library that can be used for non-performance critical, casual use of SM4, and as a fallback for, e.g., SIMD code that needs a secondary path that can be taken in contexts where the SIMD unit is off limits. Secondly, some codes have been optimized, such as unrolling small times loop, removing unnecessary memory shifts, exporting sbox, fk, ck arrays, and basic encryption and decryption functions. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 23 Jul, 2021 1 commit
-
-
Ard Biesheuvel authored
The updated XTS code fails to check the return code of skcipher_walk_virt, which may lead to skcipher_walk_abort() or skcipher_walk_done() being called while the walk argument is in an inconsistent state. So check the return value after each such call, and bail on errors. Fixes: 2481104f ("crypto: x86/aes-ni-xts - rewrite and drop indirections via glue helper") Reported-by: Dave Hansen <dave.hansen@intel.com> Reported-by: syzbot <syzbot+5d1bad8042a8f0e8117a@syzkaller.appspotmail.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 16 Jul, 2021 6 commits
-
-
Randy Dunlap authored
Rename module_init & module_exit functions that are named "mod_init" and "mod_exit" so that they are unique in both the System.map file and in initcall_debug output instead of showing up as almost anonymous "mod_init". This is helpful for debugging and in determining how long certain module_init calls take to execute. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Randy Dunlap authored
Rename module_init & module_exit functions that are named "mod_init" and "mod_exit" so that they are unique in both the System.map file and in initcall_debug output instead of showing up as almost anonymous "mod_init". This is helpful for debugging and in determining how long certain module_init calls take to execute. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Andres Salomon <dilinger@queued.net> Cc: linux-geode@lists.infradead.org Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Randy Dunlap authored
Rename module_init & module_exit functions that are named "mod_init" and "mod_exit" so that they are unique in both the System.map file and in initcall_debug output instead of showing up as almost anonymous "mod_init". This is helpful for debugging and in determining how long certain module_init calls take to execute. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jason A. Donenfeld <Jason@zx2c4.com> Cc: linux-arm-kernel@lists.infradead.org Cc: patches@armlinux.org.uk Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Sean Anderson authored
This uses the sg_pcopy_from_buffer to copy data, instead of doing it ourselves. In addition to reducing code size, this fixes the following oops resulting from failing to kmap the page: [ 68.896381] Unable to handle kernel NULL pointer dereference at virtual address 00000ab8 [ 68.904539] pgd = 3561adb3 [ 68.907475] [00000ab8] *pgd=00000000 [ 68.911153] Internal error: Oops: 805 [#1] ARM [ 68.915618] Modules linked in: cfg80211 rfkill des_generic libdes arc4 libarc4 cbc ecb algif_skcipher sha256_generic libsha256 sha1_generic hmac aes_generic libaes cmac sha512_generic md5 md4 algif_hash af_alg i2c_imx i2c_core ci_hdrc_imx ci_hdrc mxs_dcp ulpi roles udc_core imx_sdma usbmisc_imx usb_common firmware_class virt_dma phy_mxs_usb nf_tables nfnetlink ip_tables x_tables ipv6 autofs4 [ 68.950741] CPU: 0 PID: 139 Comm: mxs_dcp_chan/ae Not tainted 5.10.34 #296 [ 68.958501] Hardware name: Freescale i.MX6 Ultralite (Device Tree) [ 68.964710] PC is at memcpy+0xa8/0x330 [ 68.968479] LR is at 0xd7b2bc9d [ 68.971638] pc : [<c053e7c8>] lr : [<d7b2bc9d>] psr: 000f0013 [ 68.977920] sp : c2cbbee4 ip : 00000010 fp : 00000010 [ 68.983159] r10: 00000000 r9 : c3283a40 r8 : 1a5a6f08 [ 68.988402] r7 : 4bfe0ecc r6 : 76d8a220 r5 : c32f9050 r4 : 00000001 [ 68.994945] r3 : 00000ab8 r2 : fffffff0 r1 : c32f9050 r0 : 00000ab8 [ 69.001492] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 69.008646] Control: 10c53c7d Table: 83664059 DAC: 00000051 [ 69.014414] Process mxs_dcp_chan/ae (pid: 139, stack limit = 0x667b57ab) [ 69.021133] Stack: (0xc2cbbee4 to 0xc2cbc000) [ 69.025519] bee0: c32f9050 c3235408 00000010 00000010 00000ab8 00000001 bf10406c [ 69.033720] bf00: 00000000 00000000 00000010 00000000 c32355d0 832fb080 00000000 c13de2fc [ 69.041921] bf20: c3628010 00000010 c33d5780 00000ab8 bf1067e8 00000002 c21e5010 c2cba000 [ 69.050125] bf40: c32f8040 00000000 bf106a40 c32f9040 c3283a80 00000001 bf105240 c3234040 [ 69.058327] bf60: ffffe000 c3204100 c2c69800 c2cba000 00000000 bf103b84 00000000 c2eddc54 [ 69.066530] bf80: c3204144 c0140d1c c2cba000 c2c69800 c0140be8 00000000 00000000 00000000 [ 69.074730] bfa0: 00000000 00000000 00000000 c0100114 00000000 00000000 00000000 00000000 [ 69.082932] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 69.091131] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 69.099364] [<c053e7c8>] (memcpy) from [<bf10406c>] (dcp_chan_thread_aes+0x4e8/0x840 [mxs_dcp]) [ 69.108117] [<bf10406c>] (dcp_chan_thread_aes [mxs_dcp]) from [<c0140d1c>] (kthread+0x134/0x160) [ 69.116941] [<c0140d1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20) [ 69.124178] Exception stack(0xc2cbbfb0 to 0xc2cbbff8) [ 69.129250] bfa0: 00000000 00000000 00000000 00000000 [ 69.137450] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 69.145648] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 69.152289] Code: e320f000 e4803004 e4804004 e4805004 (e4806004) Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Sean Anderson authored
After calling dma_map_single(), we must also call dma_mapping_error(). This fixes the following warning when compiling with CONFIG_DMA_API_DEBUG: [ 311.241478] WARNING: CPU: 0 PID: 428 at kernel/dma/debug.c:1027 check_unmap+0x79c/0x96c [ 311.249547] DMA-API: mxs-dcp 2280000.crypto: device driver failed to check map error[device address=0x00000000860cb080] [size=32 bytes] [mapped as single] Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
With the swtich to use HMAC(SHA-512) as the default DRBG type, the configuration must now also select SHA-512. Fixes: 9b7b9468 "crypto: DRBG - switch to HMAC SHA512 DRBG as default DRBG" Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Stephan Mueller <smueller@chronox.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 11 Jul, 2021 11 commits
-
-
Linus Torvalds authored
-
Hugh Dickins authored
I know nothing about zone_device pages and !device_private pages; but if try_to_migrate_one() will do nothing for them, then it's better that try_to_migrate() filter them first, than trawl through all their vmas. Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
In the unlikely race case that page_mlock_one() finds VM_LOCKED has been cleared by the time it got page table lock, page_vma_mapped_walk_done() must be called before returning, either explicitly, or by a final call to page_vma_mapped_walk() - otherwise the page table remains locked. Fixes: cd62734c ("mm/rmap: split try_to_munlock from try_to_unmap") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reported-by: kernel test robot <oliver.sang@intel.com> Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/ Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
The kernel recovers in due course from missing Mlocked pages: but there was no point in calling page_mlock() (formerly known as try_to_munlock()) on a THP, because nothing got done even when it was found to be mapped in another VM_LOCKED vma. It's true that we need to be careful: Mlocked accounting of pte-mapped THPs is too difficult (so consistently avoided); but Mlocked accounting of only-pmd-mapped THPs is supposed to work, even when multiple mappings are mlocked and munlocked or munmapped. Refine the tests. There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so page_mlock_one() does not even have to worry about that complication. (I said the kernel recovers: but would page reclaim be likely to split THP before rediscovering that it's VM_LOCKED? I've not followed that up) Fixes: 9a73f61b ("thp, mlock: do not mlock PTE-mapped file huge pages") Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alistair Popple <apopple@nvidia.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Hugh Dickins authored
Parallel developments in mm/rmap.c have left behind some out-of-date comments: try_to_migrate_one() also accepts TTU_SYNC (already commented in try_to_migrate() itself), and try_to_migrate() returns nothing at all. TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so delete the "recently referenced" comment from try_to_unmap_one() (once upon a time the comment was near the removed codeblock, but they drifted apart). Signed-off-by: Hugh Dickins <hughd@google.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Yang Shi <shy828301@gmail.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Ingo Molnar: "Two fixes: - Fix a MIPS IRQ handling RCU bug - Remove a DocBook annotation for a parameter that doesn't exist anymore" * tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry genirq/irqdesc: Drop excess kernel-doc entry @lookup
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Ingo Molnar: "Three fixes: - Fix load tracking bug/inconsistency - Fix a sporadic CFS bandwidth constraints enforcement bug - Fix a uclamp utilization tracking bug for newly woken tasks" * tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/uclamp: Ignore max aggregation if rq is idle sched/fair: Fix CFS bandwidth hrtimer expiry type sched/fair: Sync load_sum with load_avg after dequeue
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "A fix and a hardware-enablement addition: - Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup - Add cstate event support for Intel ICELAKE_X and ICELAKE_D" * tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Clean up error handling path of iio mapping perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull locking fixes from Ingo Molnar: - Fix a Sparc crash - Fix a number of objtool warnings - Fix /proc/lockdep output on certain configs - Restore a kprobes fail-safe * tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/atomic: sparc: Fix arch_cmpxchg64_local() kprobe/static_call: Restore missing static_call_text_reserved() static_call: Fix static_call_text_reserved() vs __init jump_label: Fix jump_label_text_reserved() vs __init locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull more SCSI updates from James Bottomley: "This is a set of minor fixes and clean ups in the core and various drivers. The only core change in behaviour is the I/O retry for spinup notify, but that shouldn't impact anything other than the failing case" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits) scsi: virtio_scsi: Add validation for residual bytes from response scsi: ipr: System crashes when seeing type 20 error scsi: core: Retry I/O for Notify (Enable Spinup) Required error scsi: mpi3mr: Fix warnings reported by smatch scsi: qedf: Add check to synchronize abort and flush scsi: MAINTAINERS: Add mpi3mr driver maintainers scsi: libfc: Fix array index out of bound exception scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro scsi: qedf: Use DEVICE_ATTR_RO() macro scsi: qedi: Use DEVICE_ATTR_RO() macro scsi: message: mptfc: Switch from pci_ to dma_ API scsi: be2iscsi: Fix some missing space in some messages scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe() scsi: ufs: Fix build warning without CONFIG_PM scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment scsi: qla2xxx: Add heartbeat check scsi: virtio_scsi: Do not overwrite SCSI status scsi: libsas: Add LUN number check in .slave_alloc callback scsi: core: Inline scsi_mq_alloc_queue() ...
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tool updates from Arnaldo Carvalho de Melo: "New features: - Enable use of BPF counters with 'perf stat --for-each-cgroup', using per-CPU 'cgroup-switch' events with an attached BPF program that does aggregation per-cgroup in the kernel instead of using per-cgroup perf events. - Add Topdown metrics L2 events as default events in 'perf stat' for systems having those events. Hardware tracing: - Add a config for max loops without consuming a packet in the Intel PT packet decoder, set via 'perf config intel-pt.max-loops=N' Hardware enablement: - Disable misleading NMI watchdog message in 'perf stat' on hybrid systems such as Intel Alder Lake. - Add a dummy event on hybrid systems to collect metadata records. - Add 24x7 nest metric events for the Power10 platform. Fixes: - Fix event parsing for PMUs starting with the same prefix. - Fix the 'perf trace' 'trace' alias installation dir. - Fix buffer size to report iregs in perf script python scripts, supporting the extended registers in PowerPC. - Fix overflow in elf_sec__is_text(). - Fix 's' on source line when disasm is empty in the annotation TUI, accessible via 'perf annotate', 'perf report' and 'perf top'. - Plug leaks in scandir() returned dirent entries in 'perf test' when sorting the shell tests. - Fix --task and --stat with pipe input in 'perf report'. - Fix 'perf probe' use of debuginfo files by build id. - If a DSO has both dynsym and symtab ELF sections, read from both when loading the symbol table, fixing a problem processing Fedora 32 glibc DSOs. Libraries: - Add grouping of events to libperf, from code in tools/perf, allowing libperf users to use that mode. Misc: - Filter plt stubs from the 'perf probe --functions' output. - Update UAPI header copies for asound, DRM, mman-common.h and the ones affected by the quotactl_fd syscall" * tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits) perf test: Add free() calls for scandir() returned dirent entries libperf: Add tests for perf_evlist__set_leader() libperf: Remove BUG_ON() from library code in get_group_fd() libperf: Add group support to perf_evsel__open() perf tools: Fix pattern matching for same substring in different PMU type perf record: Add a dummy event on hybrid systems to collect metadata records perf stat: Add Topdown metrics L2 events as default events libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader() libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups libperf: Move 'leader' from tools/perf to perf_evsel::leader libperf: Move 'idx' from tools/perf to perf_evsel::idx libperf: Change tests to single static and shared binaries perf intel-pt: Add a config for max loops without consuming a packet perf stat: Disable the NMI watchdog message on hybrid perf vendor events power10: Adds 24x7 nest metric events for power10 platform perf script python: Fix buffer size to report iregs in perf script perf trace: Fix the perf trace link location perf top: Fix overflow in elf_sec__is_text() perf annotate: Fix 's' on source line when disasm is empty perf probe: Do not show @plt function by default ...
-
- 10 Jul, 2021 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linuxLinus Torvalds authored
Pull RTC updates from Alexandre Belloni: "Mostly documentation/comment changes and non urgent fixes. - add or fix SPDX identifiers - NXP pcf*: fix datasheet URLs - imxdi: add wakeup support - pcf2127: handle timestamp interrupts, this fixes a possible interrupt storm - bd70528: Drop BD70528 support" * tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits) rtc: pcf8523: rename register and bit defines rtc: pcf2127: handle timestamp interrupts rtc: at91sam9: Remove unnecessary offset variable checks rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt() rtc: spear: convert to SPDX identifier rtc: tps6586x: convert to SPDX identifier rtc: tps80031: convert to SPDX identifier rtc: rtd119x: Fix format of SPDX identifier rtc: sc27xx: Fix format of SPDX identifier rtc: palmas: convert to SPDX identifier rtc: max6900: convert to SPDX identifier rtc: ds1374: convert to SPDX identifier rtc: au1xxx: convert to SPDX identifier rtc: pcf85063: Update the PCF85063A datasheet revision dt-bindings: rtc: ti,bq32k: take maintainership rtc: pcf8563: Fix the datasheet URL rtc: pcf85063: Fix the datasheet URL rtc: pcf2127: Fix the datasheet URL dt-bindings: rtc: ti,bq32k: Convert to json-schema dt-bindings: rtc: rx8900: Convert to YAML schema ...
-
Mel Gorman authored
Commit dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to local_lock") folded in a workaround patch for pahole that was unable to deal with zero-sized percpu structures. A superior workaround is achieved with commit a0b8200d ("kbuild: skip per-CPU BTF generation for pahole v1.18-v1.21"). This patch reverts the dummy field and the pahole version check. Fixes: dbbee9d5 ("mm/page_alloc: convert per-cpu list protection to local_lock") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Belloni authored
arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly and defines REG_OFFSET. Rename the register and bit definition to something specific to the driver. Fixes: 7fd70c65 ("ARM: irqstat: Get rid of duplicated declaration") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "13 cifs/smb3 fixes. Most are to address minor issues pointed out by Coverity. Also includes a packet signing enhancement and mount improvement" * tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal version number cifs: prevent NULL deref in cifs_compose_mount_options() SMB3.1.1: Add support for negotiating signing algorithm cifs: use helpers when parsing uid/gid mount options and validate them CIFS: Clarify SMB1 code for POSIX Lock CIFS: Clarify SMB1 code for rename open file CIFS: Clarify SMB1 code for delete CIFS: Clarify SMB1 code for SetFileSize smb3: fix typo in header file CIFS: Clarify SMB1 code for UnixSetPathInfo CIFS: Clarify SMB1 code for UnixCreateSymLink cifs: clarify SMB1 code for UnixCreateHardLink cifs: make locking consistent around the server session status
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fix from Bjorn Helgaas: "Revert host bridge window patch that fixed HP EliteDesk 805 G6, but broke ppc:sam460ex (Bjorn Helgaas)" * tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Coalesce host bridge contiguous apertures"
-