- 21 Feb, 2023 33 commits
-
-
Jason Wang authored
This patch adds support for basic vendor stats that include counters for tx, rx and cvq. Acked-by:
Eugenio Pérez <eperezma@redhat.com> Signed-off-by:
Jason Wang <jasowang@redhat.com> Message-Id: <20221223055548.27810-5-jasowang@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com>
-
Jason Wang authored
This patch adds a new config ops callback to allow individual simulator to implement the vendor stats callback. Acked-by:
-
Jason Wang authored
Allow individual simulator to customize the allocation size. Reviewed-by:
-
Jason Wang authored
This allows us to control the allocation size of the structure. Reviewed-by:
-
Jason Wang authored
vDPA simulators are software emulated device, so let's switch to use weak barriers to avoid extra overhead in the driver. Signed-off-by:
-
Suwan Kim authored
This patch adds completion batching to the IRQ path. It reuses batch completion code of virtblk_poll(). It collects requests to io_comp_batch and processes them all at once. It can boost up the performance by 2%. To validate the performance improvement and stabilty, I did fio test with 4 vCPU VM and 12 vCPU VM respectively. Both VMs have 8GB ram and the same number of HW queues as vCPU. The fio cammad is as follows and I ran the fio 5 times and got IOPS average. (io_uring, randread, direct=1, bs=512, iodepth=64 numjobs=2,4) Test result shows about 2% improvement. 4 vcpu VM | numjobs=2 | numjobs=4 ----------------------------------------------------------- fio without patch | 367.2K IOPS | 397.6K IOPS ----------------------------------------------------------- fio with patch | 372.8K IOPS | 407.7K IOPS 12 vcpu VM | numjobs=2 | numjobs=4 ----------------------------------------------------------- fio without patch | 363.6K IOPS | 374.8K IOPS ----------------------------------------------------------- fio with patch | 373.8K IOPS | 385.3K IOPS Signed-off-by:Suwan Kim <suwan.kim027@gmail.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Message-Id: <20221221145456.281218-3-suwan.kim027@gmail.com> Signed-off-by:
-
Suwan Kim authored
Driver should set req->state to MQ_RQ_COMPLETE after it finishes to process req. But virtio-blk doesn't set MQ_RQ_COMPLETE after virtblk_poll() handles req and req->state still remains MQ_RQ_IN_FLIGHT. Fortunately so far there is no issue about it because blk_mq_end_request_batch() sets req->state to MQ_RQ_IDLE. In this patch, virblk_poll() calls blk_mq_complete_request_remote() to set req->state to MQ_RQ_COMPLETE before it adds req to a batch completion list. So it properly sets req->state after polling I/O is finished. Fixes: 4e040052 ("virtio-blk: support polling I/O") Signed-off-by:
-
Bagas Sanjaya authored
A sentence that checks for later spec version is meant for developers hacking the documentation source. Make it comment block (hidden from actual output). Signed-off-by:
Bagas Sanjaya <bagasdotme@gmail.com> Message-Id: <20221220095828.27588-4-bagasdotme@gmail.com> Signed-off-by:
-
Bagas Sanjaya authored
"It's at this stage that" means "At this point", so use the latter as it is more effective. Signed-off-by:
-
Bagas Sanjaya authored
Parenthesize targets to links in "References" section to distinguish them from remaining texts. While at it, describe the second target. Signed-off-by:
-
Sebastien Boeuf authored
Implement resume operation for vdpa_sim devices, so vhost-vdpa will offer that backend feature and userspace can effectively resume the device. Signed-off-by:
Sebastien Boeuf <sebastien.boeuf@intel.com> Message-Id: <15a4566826033c5dd9a2167e5cfb0ef4d90cea49.1672742878.git.sebastien.boeuf@intel.com> Signed-off-by:
-
Sebastien Boeuf authored
This new ioctl adds support for resuming the device from userspace. This is required when trying to restore the device in a functioning state after it's been suspended. It is already possible to reset a suspended device, but that means the device must be reconfigured and all the IOMMU/IOTLB mappings must be recreated. This new operation allows the device to be resumed without going through a full reset. This is particularly useful when trying to perform offline migration of a virtual machine (also known as snapshot/restore) as it allows the VMM to resume the virtual machine back to a running state after the snapshot is performed. Acked-by:
-
Sebastien Boeuf authored
Userspace knows if the device can be resumed or not by checking this feature bit. It's only exposed if the vdpa driver backend implements the resume() operation callback. Userspace trying to negotiate this feature when it hasn't been exposed will result in an error. Acked-by:
-
Sebastien Boeuf authored
Add a new operation to allow a vDPA device to be resumed after it has been suspended. Trying to resume a device that wasn't suspended will result in a no-op. This operation is optional. If it's not implemented, the associated backend feature bit will not be exposed. And if the feature bit is not exposed, invoking this operation will return an error. Acked-by:
-
Alvaro Karsz authored
This commit includes: 1) The driver to manage the controlplane over vDPA bus. 2) A HW monitor device to read health values from the DPU. Signed-off-by:
Alvaro Karsz <alvaro.karsz@solid-run.com> Acked-by:
-
Alvaro Karsz authored
This patch fixes a FLR bug on the SNET DPU rev 1 by setting the PCI_DEV_FLAGS_NO_FLR_RESET flag. As there is a quirk to avoid FLR (quirk_no_flr), I added a new quirk to check the rev ID before calling to quirk_no_flr. Without this patch, a SNET DPU rev 1 may hang when FLR is applied. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Message-Id: <20230110165638.123745-3-alvaro.karsz@solid-run.com> Signed-off-by:
-
Alvaro Karsz authored
Add SolidRun vendor ID to pci_ids.h The vendor ID is used in 2 different source files, the SNET vDPA driver and PCI quirks. Signed-off-by:
-
Eugenio Pérez authored
VIRTIO_NET_S_LINK_UP is already returned in config reads since vdpasim creation, but the feature bit was not offered to the driver. Tested modifying VIRTIO_NET_S_LINK_UP and different values of "status" in qemu virtio-net options, using vhost_vdpa. Not considering as a fix, because there should be no driver trusting in this config read before the feature flag. Signed-off-by:
Lei Yang <leiyang@redhat.com>
-
Zhu Lingshan authored
This commit implements features provisioning for ifcvf, that means: 1)checkk whether the provisioned features are supported by the management device 2)vDPA device only presents selected feature bits Examples: a)The management device supported features: $ vdpa mgmtdev show pci/0000:01:00.5 pci/0000:01:00.5: supported_classes net max_supported_vqs 9 dev_features MTU MAC MRG_RXBUF CTRL_VQ MQ ANY_LAYOUT VERSION_1 ACCESS_PLATFORM b)Provision a vDPA device with all supported features: $ vdpa dev add name vdpa0 mgmtdev pci/0000:01:00.5 $ vdpa/vdpa dev config show vdpa0 vdpa0: mac 00:e8:ca:11:be:05 link up link_announce false max_vq_pairs 4 mtu 1500 negotiated_features MRG_RXBUF CTRL_VQ MQ VERSION_1 ACCESS_PLATFORM c)Provision a vDPA device with a subset of the supported features: $ vdpa dev add name vdpa0 mgmtdev pci/0000:01:00.5 device_features 0x300020020 $ vdpa dev config show vdpa0 mac 00:e8:ca:11:be:05 link up link_announce false negotiated_features CTRL_VQ VERSION_1 ACCESS_PLATFORM Signed-off-by:
Zhu Lingshan <lingshan.zhu@intel.com> Message-Id: <20221125145724.1129962-13-lingshan.zhu@intel.com> Signed-off-by:
-
Zhu Lingshan authored
This commit retires ifcvf_private_to_vf, because the vf is already a member of the adapter, so it could be easily addressed by adapter->vf. Signed-off-by:
-
Zhu Lingshan authored
The adapter is the container of the vdpa_device, this commits allocate the adapter in dev_add() rather than in probe(). So that the vdpa_device() could be re-created when the userspace creates the vdpa device, and free-ed in dev_del() Signed-off-by:
-
Zhu Lingshan authored
This commit allocates the hw structure in the management device structure. So the hardware can be initialized once the management device is allocated in probe. Signed-off-by:
-
Zhu Lingshan authored
All ifcvf_request_irq's callees are refactored to work on ifcvf_hw, so it should be decoupled from the adapter as well Signed-off-by:
-
Zhu Lingshan authored
This commit decouples the config irq requester, the device shared irq requester and the MSI vectors allocator from the adapter. So they can be safely invoked since probe before the adapter is allocated. Signed-off-by:
-
Zhu Lingshan authored
This commit decouples the vq irq requester from the adapter, so that these functions can be invoked since probe. Signed-off-by:
-
Zhu Lingshan authored
This commit decouples config IRQ releaser from the adapter, so that it could be invoked once probe or in err handlers. ifcvf_free_irq() works on ifcvf_hw in this commit Signed-off-by:
-
Zhu Lingshan authored
This commit decouples the IRQ releasers from the adapter, so that these functions could be safely invoked once probe Signed-off-by:
-
Zhu Lingshan authored
This commit reverses the order of allocating the management device and the adapter. So that it would be possible to move the allocation of the adapter to dev_add(). Signed-off-by:
-
Zhu Lingshan authored
This commit decopules the config space ops from the adapter layer, so these functions can be invoked once the device is probed. Signed-off-by:
-
Zhu Lingshan authored
This commit gets rid of ifcvf_adapter in hw features related functions in ifcvf_base. Then these functions are more rubust and de-coupling from the ifcvf_adapter layer. So these functions could be invoded once the device is probed, even before the adapter is allocaed. Signed-off-by:
-
Eli Cohen authored
For each interface, either VLAN tagged or untagged, add two hardware counters: one for unicast and another for multicast. The counters count RX packets and bytes and can be read through debugfs: $ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/untagged/mcast/packets $ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/untagged/ucast/bytes This feature is controlled via the config option MLX5_VDPA_STEERING_DEBUG. It is off by default as it may have some impact on performance. includes a fixup By Yang Yingliang <yangyingliang@huawei.com>: vdpa/mlx5: fix check wrong pointer in mlx5_vdpa_add_mac_vlan_rules() The local variable 'rule' is not used anymore, fix return value check after calling mlx5_add_flow_rules(). Signed-off-by:
Eli Cohen <elic@nvidia.com> Message-Id: <20221114131759.57883-9-elic@nvidia.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Message-Id: <20230104074418.1737510-1-yangyingliang@huawei.com> Signed-off-by:
-
Eli Cohen authored
Add debugfs subtree and expose flow table ID and TIR number. This information can be used by external tools to do extended troubleshooting. The information can be retrieved like so: $ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/table_id $ cat /sys/kernel/debug/mlx5/mlx5_core.sf.1/vdpa-0/rx/tirn Reviewed-by:
Si-Wei Liu <si-wei.liu@oracle.com> Acked-by:
-
Eli Cohen authored
Move some definitions from mlx5_vnet.c to newly added header file mlx5_vnet.h. We need these definitions for the following patches that add debugfs tree to expose information vital for debug. Reviewed-by:
-
- 15 Feb, 2023 6 commits
-
-
Michael S. Tsirkin authored
zone is a virtio 1.x feature so all fields are LE, they are handled as such, but have mistakenly been labeled __virtioXX in the header. This results in a bunch of sparse warnings. Use the __leXX tags to make sparse happy. Message-Id: <20221222193214.55146-1-mst@redhat.com> Signed-off-by: -
Michael S. Tsirkin authored
virtio blk returns a 64 bit append_sector in an input buffer, in LE format. This field is not tagged as LE correctly, so even though the generated code is ok, we get warnings from sparse: drivers/block/virtio_blk.c:332:33: sparse: sparse: cast to restricted __le64 Make sparse happy by using the correct type. Message-Id: <20221220125154.564265-1-mst@redhat.com> Signed-off-by: -
Michael S. Tsirkin authored
virtblk_result returns blk_status_t which is a bitwise restricted type, so we are not supposed to stuff it in a plain int temporary variable. All we do with it is pass it on to a function expecting blk_status_t so the generated code is ok, but we get warnings from sparse: drivers/block/virtio_blk.c:326:36: sparse: sparse: incorrect type in initializer (different base types) @@ expected int status @@ +got restricted blk_status_t @@ drivers/block/virtio_blk.c:334:33: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected restricted +blk_status_t [usertype] error @@ got int status @@ Make sparse happy by using the correct type. Message-Id: <20221220124152.523531-1-mst@redhat.com> Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com>
-
Dmitry Fomichev authored
This patch adds support for Zoned Block Devices (ZBDs) to the kernel virtio-blk driver. The patch accompanies the virtio-blk ZBD support draft that is now being proposed for standardization. The latest version of the draft is linked at https://github.com/oasis-tcs/virtio-spec/issues/143 . The QEMU zoned device code that implements these protocol extensions has been developed by Sam Li and it is currently in review at the QEMU mailing list. A number of virtblk request structure changes has been introduced to accommodate the functionality that is specific to zoned block devices and, most importantly, make room for carrying the Zoned Append sector value from the device back to the driver along with the request status. The zone-specific code in the patch is heavily influenced by NVMe ZNS code in drivers/nvme/host/zns.c, but it is simpler because the proposed virtio ZBD draft only covers the zoned device features that are relevant to the zoned functionality provided by Linux block layer. includes the following fixup: virtio-blk: fix probe without CONFIG_BLK_DEV_ZONED When building without CONFIG_BLK_DEV_ZONED, VIRTIO_BLK_F_ZONED is excluded from array of driver features. As a result virtio_has_feature panics in virtio_check_driver_offered_feature since that by design verifies that a feature we are checking for is listed in the feature array. To fix, replace the call to virtio_has_feature with a stub. Message-Id: <20221016034127.330942-3-dmitry.fomichev@wdc.com> Co-developed-by:
Stefan Hajnoczi <stefanha@gmail.com> Signed-off-by:
Dmitry Fomichev <dmitry.fomichev@wdc.com> Message-Id: <20221220112340.518841-1-mst@redhat.com> Reported-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Debugged-by:
Anders Roxell <anders.roxell@linaro.org> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Ricardo Cañuelo authored
Basic doc about Virtio on Linux and a short tutorial on Virtio drivers. includes the following fixup: virtio: fix virtio_config_ops kerneldocs Fixes two warning messages when building htmldocs: warning: duplicate section name 'Note' warning: expecting prototype for virtio_config_ops(). Prototype was for vq_callback_t() instead Message-Id: <20221010064359.1324353-2-ricardo.canuelo@collabora.com> Signed-off-by:Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Message-Id: <20221220100035.2712449-1-ricardo.canuelo@collabora.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
-
Michael Sammler authored
Compute the numa information for a virtio_pmem device from the memory range of the device. Previously, the target_node was always 0 since the ndr_desc.target_node field was never explicitly set. The code for computing the numa node is taken from cxl_pmem_region_probe in drivers/cxl/pmem.c. Signed-off-by:
Michael Sammler <sammler@google.com> Reviewed-by:
Pasha Tatashin <pasha.tatashin@soleen.com> Reviewed-by:
Pankaj Gupta <pankaj.gupta@amd.com> Tested-by:
Mina Almasry <almasrymina@google.com> Message-Id: <20221115214036.1571015-1-sammler@google.com> Signed-off-by:
-
- 13 Feb, 2023 1 commit
-
-
Eugenio Pérez authored
vdpasim_queue_ready calls vringh_init_iotlb, which resets split indexes. But it can be called after setting a ring base with vdpasim_set_vq_state. Fix it by stashing them. They're still resetted in vdpasim_vq_reset. This was discovered and tested live migrating the vdpa_sim_net device. Fixes: 2c53d0f6 ("vdpasim: vDPA device simulator") Signed-off-by:
-
