- 05 Oct, 2014 40 commits
-
-
Weston Andros Adamson authored
commit 78270e8f upstream. Commit 6094f838 "nfs: allow coalescing of subpage requests" got rid of the requirement that requests cover whole pages, but it made some incorrect assumptions. It turns out that callers of this interface can map adjacent requests (by file position as seen by req_offset + req->wb_bytes) to different pages, even when they could share a page. An example is the direct I/O interface - iov_iter_get_pages_alloc may return one segment with a partial page filled and the next segment (which is adjacent in the file position) starts with a new page. Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Weston Andros Adamson authored
commit bba5c188 upstream. Adjacent requests that share the same page are allowed, but should only use one entry in the page vector. This avoids overruning the page vector - it is sized based on how many bytes there are, not by request count. This fixes issues that manifest as "Redzone overwritten" bugs (the vector overrun) and hangs waiting on page read / write, as it waits on the same page more than once. This also adds bounds checking to the page vector with a graceful failure (WARN_ON_ONCE and pgio error returned to application). Reported-by:
-
Weston Andros Adamson authored
commit 7c3af975 upstream. This handles the 'nonblock=false' case in nfs_lock_and_join_requests. If the group is already locked and blocking is allowed, drop the inode lock and wait for the group lock to be cleared before trying it all again. This should fix warnings found in peterz's tree (sched/wait branch), where might_sleep() checks are added to wait.[ch]. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Peng Tao <tao.peng@primarydata.com> Signed-off-by:
-
Weston Andros Adamson authored
commit 94970014 upstream. This fixes handling of errors from nfs_page_group_lock in nfs_lock_and_join_requests. It now releases the inode lock and the reference to the head request. Reported-by:
-
Weston Andros Adamson authored
commit bfd484a5 upstream. __nfs_pageio_add_request was calling nfs_page_group_lock nonblocking, but this can return -EAGAIN which would end up passing -EIO to the application. There is no reason not to block in this path, so change the two calls to do so. Also, there is no need to check the return value of nfs_page_group_lock when nonblock=false, so remove the error handling code. Signed-off-by:
-
Weston Andros Adamson authored
commit bc8a309e upstream. nfs_page_group_lock was calling wait_on_bit_lock even when told not to block. Fix by first trying test_and_set_bit, followed by wait_on_bit_lock if and only if blocking is allowed. Return -EAGAIN if nonblocking and the test_and_set of the bit was already locked. Signed-off-by:
-
Weston Andros Adamson authored
commit fd2f3a06 upstream. Flip the meaning of the second argument from 'wait' to 'nonblock' to match related functions. Update all five calls to reflect this change. Signed-off-by:
-
Weston Andros Adamson authored
commit 411a99ad upstream. Signed-off-by:
-
Weston Andros Adamson authored
commit e6cf82d1 upstream. This is useful when lsegs need to be released while holding locks. Signed-off-by:
-
Weston Andros Adamson authored
commit e7029206 upstream. Return errors from wait_on_bit_lock from nfs_page_group_lock. Add a bool argument @wait to nfs_page_group_lock. If true, loop over wait_on_bit_lock until it returns cleanly. If false, return the error from wait_on_bit_lock. Signed-off-by:
-
Weston Andros Adamson authored
commit 4714fb51 upstream. The refcounting on nfs_pgio_header was related to there being (possibly) more than one nfs_pgio_data. Now that nfs_pgio_data has been merged into nfs_pgio_header, there is no reason to do this ref counting. Just call the completion callback on nfs_pgio_release/nfs_pgio_error. Signed-off-by:
-
Weston Andros Adamson authored
commit d45f60c6 upstream. struct nfs_pgio_data only exists as a member of nfs_pgio_header, but is passed around everywhere, because there used to be multiple _data structs per _header. Many of these functions then use the _data to find a pointer to the _header. This patch cleans this up by merging the nfs_pgio_data structure into nfs_pgio_header and passing nfs_pgio_header around instead. Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Weston Andros Adamson authored
commit 823b0c9d upstream. Rename "verf" to "writeverf" and "pages" to "page_array" to prepare for merge of nfs_pgio_data and nfs_pgio_header. Reviewed-by:
-
Weston Andros Adamson authored
commit 1e7f3a48 upstream. nfs_rw_header was used to allocate an nfs_pgio_header along with an nfs_pgio_data, because a _header would need at least one _data. Now there is only ever one nfs_pgio_data for each nfs_pgio_header -- move it to nfs_pgio_header and get rid of nfs_rw_header. Reviewed-by:
-
J. Bruce Fields authored
commit 15b23ef5 upstream. The calculation of page_ptr here is wrong in the case the read doesn't start at an offset that is a multiple of a page. The result is that nfs4svc_encode_compoundres sets rq_next_page to a value one too small, and then the loop in svc_free_res_pages may incorrectly fail to clear a page pointer in rq_respages[]. Pages left in rq_respages[] are available for the next rpc request to use, so xdr data may be written to that page, which may hold data still waiting to be transmitted to the client or data in the page cache. The observed result was silent data corruption seen on an NFSv4 client. We tag this as "fixing" 05638dc7 because that commit exposed this bug, though the incorrect calculation predates it. Particular thanks to Andrea Arcangeli and David Gilbert for analysis and testing. Fixes: 05638dc7 "nfsd4: simplify server xdr->next_page use" Reported-by:
Andrea Arcangeli <aarcange@redhat.com> Tested-by:
"Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Trond Myklebust authored
commit cd9288ff upstream. James Drew reports another bug whereby the NFS client is now sending an OPEN_DOWNGRADE in a situation where it should really have sent a CLOSE: the client is opening the file for O_RDWR, but then trying to do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec. Reported-by:
James Drews <drews@engr.wisc.edu> Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu Fixes: aee7af35 (NFSv4: Fix problems with close in the presence...) Signed-off-by:
-
Steve Dickson authored
commit 080af20c upstream. There is a race between nfs4_state_manager() and nfs_server_remove_lists() that happens during a nfsv3 mount. The v3 mount notices there is already a supper block so nfs_server_remove_lists() called which uses the nfs_client_lock spin lock to synchronize access to the client list. At the same time nfs4_state_manager() is running through the client list looking for work to do, using the same lock. When nfs4_state_manager() wins the race to the list, a v3 client pointer is found and not ignored properly which causes the panic. Moving some protocol checks before the state checking avoids the panic. Signed-off-by:
Steve Dickson <steved@redhat.com> Signed-off-by:
-
Li Zefan authored
commit aa32362f upstream. When cgroup_kn_lock_live() is called through some kernfs operation and another thread is calling cgroup_rmdir(), we'll trigger the warning in cgroup_get(). ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1228 at kernel/cgroup.c:1034 cgroup_get+0x89/0xa0() ... Call Trace: [<c16ee73d>] dump_stack+0x41/0x52 [<c10468ef>] warn_slowpath_common+0x7f/0xa0 [<c104692d>] warn_slowpath_null+0x1d/0x20 [<c10bb999>] cgroup_get+0x89/0xa0 [<c10bbe58>] cgroup_kn_lock_live+0x28/0x70 [<c10be3c1>] __cgroup_procs_write.isra.26+0x51/0x230 [<c10be5b2>] cgroup_tasks_write+0x12/0x20 [<c10bb7b0>] cgroup_file_write+0x40/0x130 [<c11aee71>] kernfs_fop_write+0xd1/0x160 [<c1148e58>] vfs_write+0x98/0x1e0 [<c114934d>] SyS_write+0x4d/0xa0 [<c16f656b>] sysenter_do_call+0x12/0x12 ---[ end trace 6f2e0c38c2108a74 ]--- Fix this by calling css_tryget() instead of cgroup_get(). v2: - move cgroup_tryget() right below cgroup_get() definition. (Tejun) Reported-by:
Zefan Li <lizefan@huawei.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
J. Bruce Fields authored
commit aee37764 upstream. Commit 3b299709 "nfsd4: enforce rd_dircount" totally misunderstood rd_dircount; it refers to total non-attribute bytes returned, not number of directory entries returned. Bring the code into agreement with RFC 3530 section 14.2.24. Fixes: 3b299709 "nfsd4: enforce rd_dircount" Signed-off-by:
-
Olav Haugan authored
commit 1fc870c7 upstream. Stage-1 context banks do not have the SMMU_CBn_TCR[SL0] field since it is only applicable to stage-2 context banks. This patch ensures that we don't set the reserved TCR bits for stage-1 translations. Signed-off-by:
Olav Haugan <ohaugan@codeaurora.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Varun Sethi authored
commit 5a9137a6 upstream. iommu_group_get_for_dev determines the iommu group for the PCI device and adds the device to the group. In the PAMU driver we were again adding the device to the same group without checking if the device already had an iommu group. This resulted in the following warning. sysfs: cannot create duplicate filename '/devices/ffe200000.pcie/pci0000:00/0000:00:00.0/iommu_group' ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:31 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc3-00002-g7505ceaf-dirty #126 task: c0000001fe0a0000 ti: c0000001fe044000 task.ti: c0000001fe044000 NIP: c00000000018879c LR: c000000000188798 CTR: c00000000001ea50 REGS: c0000001fe047040 TRAP: 0700 Not tainted (3.17.0-rc3-00002-g7505ceaf-dirty) MSR: 0000000080029000 <CE,EE,ME> CR: 24ad8e22 XER: 20000000 SOFTE: 1 GPR00: c000000000188798 c0000001fe0472c0 c0000000009a52e0 0000000000000065 GPR04: 0000000000000001 0000000000000000 3a30303a00000000 0000000027000000 GPR08: 2f696f6d00000000 c0000000008d3830 c0000000009b3938 c0000000009bb3d0 GPR12: 0000000028ad8e24 c00000000fff4000 c00000000000205c 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c0000000008a4c70 GPR24: c0000000007e9010 c0000001fe0140a8 ffffffffffffffef 0000000000000001 GPR28: c0000001fe22ebb8 c0000000007e9010 c00000000090bf10 c0000001fe220000 NIP [c00000000018879c] .sysfs_warn_dup+0x74/0xa4 LR [c000000000188798] .sysfs_warn_dup+0x70/0xa4 Call Trace: [c0000001fe0472c0] [c000000000188798] .sysfs_warn_dup+0x70/0xa4 (unreliable) [c0000001fe047350] [c000000000188d34] .sysfs_do_create_link_sd.clone.2+0x168/0x174 [c0000001fe047400] [c0000000004b3cf8] .iommu_group_add_device+0x78/0x244 [c0000001fe0474b0] [c0000000004b6964] .fsl_pamu_add_device+0x88/0x1a8 [c0000001fe047570] [c0000000004b3960] .iommu_bus_notifier+0xdc/0x15c [c0000001fe047600] [c000000000059848] .notifier_call_chain+0x8c/0xe8 [c0000001fe0476a0] [c000000000059d04] .__blocking_notifier_call_chain+0x58/0x84 [c0000001fe047750] [c00000000036619c] .device_add+0x464/0x5c8 [c0000001fe047820] [c000000000300ebc] .pci_device_add+0x14c/0x17c [c0000001fe0478c0] [c000000000300fbc] .pci_scan_single_device+0xd0/0xf4 [c0000001fe047970] [c00000000030104c] .pci_scan_slot+0x6c/0x18c [c0000001fe047a10] [c00000000030226c] .pci_scan_child_bus+0x40/0x114 [c0000001fe047ac0] [c000000000021974] .pcibios_scan_phb+0x240/0x2c8 [c0000001fe047b70] [c00000000085a970] .pcibios_init+0x64/0xc8 [c0000001fe047c00] [c000000000001884] .do_one_initcall+0xbc/0x224 [c0000001fe047d00] [c000000000852d50] .kernel_init_freeable+0x14c/0x21c [c0000001fe047db0] [c000000000002078] .kernel_init+0x1c/0xfa4 [c0000001fe047e30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4 Instruction dump: 7c7f1b79 4182001c 7fe4fb78 7f83e378 38a01000 4bffc905 60000000 7c641b78 e87e8008 7fa5eb78 48482ff5 60000000 <0fe00000> 7fe3fb78 4bf7bd39 60000000 Signed-off-by:
Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Joerg Roedel authored
commit c0df975f upstream. Checking adev == NULL is not sufficient as acpi_bus_get_device() might not touch the value of this parameter in an error case, so check the return value directly. Fixes: ed40356b Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Bjørn Mork authored
commit 508b3c67 upstream. This reverts commit 232de514 ("ACPI / battery: fix wrong value of capacity_now reported when fully charged") There is nothing wrong or unexpected about 'capacity_now' increasing above the last 'full_charge_capacity' value. Different charging cycles will cause 'full_charge_capacity' to vary, both up and down. Good battery firmwares will update 'full_charge_capacity' when the current charging cycle is complete, increasing it if necessary. It might even go above 'design_capacity' on a fresh and healthy battery. Capping 'capacity_now' to 'full_charge_capacity' is plain wrong, and printing a warning if this doesn't happen to match the 'design_capacity' is both annoying and terribly wrong. This results in bogus warnings on perfectly working systems/firmwares: [Firmware Bug]: battery: reported current charge level (39800) is higher than reported maximum charge level (39800). and wrong values being reported for 'capacity_now' and 'full_charge_capacity' after the warning has been triggered. Fixes: 232de514 ("ACPI / battery: fix wrong value of capacity_now reported when fully charged") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Fu Zhonghui authored
commit f4168b61 upstream. PM entries of LPSS power domain were not implemented correctly in commit c78b0830 "ACPI / LPSS: custom power domain for LPSS". This patch fixes and completes these PM entries. Fixes: c78b0830 (ACPI / LPSS: custom power domain for LPSS) Signed-off-by:
Li Aubrey <aubrey.li@linux.intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Fu Zhonghui <zhonghui.fu@linux.intel.com> Signed-off-by:
-
Lee, Chun-Yi authored
commit 9389f46e upstream. The value64 parameter is an u64 point that used to transfer the value for write to CMOS, or used to return the value that's read from CMOS. The value64 is an u64 point, so don't need get address again. It causes acpi_cmos_rtc_space_handler always return 0 to reader and didn't write expected value to CMOS. Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
-
Robert Baldyga authored
commit 604eac3c upstream. Endpoint 0 should not be disabled, so we start loop counter from number 1. Signed-off-by:
Robert Baldyga <r.baldyga@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
commit eb3c56c5 upstream. This patch fixes kernel panic/interrupt storm/etc issues if bootloader left s3c-hsotg module in enabled state. Now interrupt handler is enabled only after proper configuration of hardware registers. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Marek Szyprowski authored
commit b510df5a upstream. This leads to potential spinlock recursion in composite framework, other udc drivers also don't call it directly from pullup method. Signed-off-by:
-
Marek Szyprowski authored
commit e0cbe595 upstream. This patch fixes possible freeze caused by infinite loop in interrupt context. Signed-off-by:
-
Kamil Debski authored
commit ca2c5ba8 upstream. In the Generic PHY Framework a NULL phy is considered to be a valid phy thus the "if (hsotg->phy)" check does not give us the information whether the Generic PHY Framework is used. In addition to the above this patch also removes phy_init from probe and phy_exit from remove. This is not necessary when init/exit is done in the s3c_hsotg_phy_enable/disable functions. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Kamil Debski authored
commit 0655314b upstream. When the driver is removed s3c_hsotg_phy_disable is called three times instead of once. This results in decreasing of the phy reference counter below zero and thus consecutive inserts of the module fails. This patch removes calls to s3c_hsotg_phy_disable from s3c_hsotg_remove and s3c_hsotg_udc_stop. s3c_hsotg_udc_stop is called from udc-core.c only after usb_gadget_disconnect, which in turn calls s3c_hsotg_pullup, which already calls s3c_hsotg_phy_disable. s3c_hsotg_remove must be called only after udc_stop, so there is no point in disabling phy once again there. Signed-off-by:
-
Felipe Balbi authored
commit 81a60b7f upstream. we don't to gate clocks until our children are done with their remove path. Fixes: af310e96 (usb: dwc3: omap: use runtime API's to enable clocks) Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
commit dc99f16f upstream. We can't suspend the PHYs before dwc3_core_exit_mode() has been called, that's because the host and/or device sides might still need to communicate with the far end link partner. Fixes: 8ba007a9 (usb: dwc3: core: enable the USB2 and USB3 phy in probe) Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Felipe Balbi authored
commit fed33afc upstream. Currently, we disable pm_runtime before all register accesses are done, this is dangerous and might lead to abort exceptions due to the driver trying to access a register which is clocked by a clock which was long gated. Fix that by moving pm_runtime_put_sync() and pm_runtime_disable() as the last thing we do before returning from our ->remove() method. Fixes: 72246da4 (usb: Introduce DesignWare USB3 DRD Driver) Signed-off-by:
-
Alan Stern authored
commit 7312b5dd upstream. Old code in ehci-hcd tries to expedite disabling endpoints after the controller has stopped, by destroying the endpoint's associated QH without first unlinking the QH. This was necessary back when the driver wasn't so careful about keeping track of the controller's state. But now we are careful about it, and the driver knows that when the controller isn't running, no unlinking delay is needed. Furthermore, skipping the unlink step will trigger a BUG() in qh_destroy() when the preceding QH is released, because the link pointer will be non-NULL. Removing the lines that skip the unlinking step and go directly to QH_STATE_IDLE fixes the problem. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Tested-by:
-
Mark authored
commit c80b4495 upstream. This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB- SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI chain to be accessed. Without it only the (single) device with SCSI ID 0 can be used. The standalone converter sold by Entrega had model number U1-SC25. Xircom acquired Entrega and re-branded the product line PortGear. The PortGear USB to SCSI Converter (model PGSCSI) is internally identical to the Entrega product, but later models may use a different USB ID. The Entrega-branded units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and Macintosh drivers also support 085A:0028. Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac (8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may have initially used the same ID as the standalone U1-SC25 (1645:0007), but later production used 085A:0026. My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133 probably also exist. This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I couldn't find any mention of that actually existing in the wild; perhaps it was cancelled before release? Signed-off-by:
Mark Knibbs <markk@clara.co.uk> Signed-off-by:
-
Mark authored
commit b6a3ed67 upstream. Hi, The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g. iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM Microsystems chips. Only the connectors differ; both have the same USB ID. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have one of these, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the products use. Signed-off-by:
-
Mark authored
commit 67d365a5 upstream. The Adaptec USBConnect 2000 is another SCSI-USB converter which uses Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have a USBConnect 2000, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the product uses. Signed-off-by:
-
Mark authored
commit c66f1c62 upstream. The Iomega Jaz USB Adapter is a SCSI-USB converter cable. The hardware seems to be identical to e.g. the Microtech XpressSCSI, using a Shuttle/ SCM chip set. However its firmware restricts it to only work with Jaz drives. On connecting the cable a message like this appears four times in the log: reset full speed USB device number 4 using uhci_hcd That's non-fatal but the US_FL_SINGLE_LUN quirk fixes it. Signed-off-by:
-
Alan Stern authored
commit b6089f19 upstream. Commit d24d481b (usb-storage: Modify and export adjust_quirks so that it can be used by uas) added the 'u' flag to the quirks module parameter for usb-storage, but neglected to update the documentation. This patch adds the documentation. Signed-off-by:
-
