- 26 Jun, 2006 40 commits
-
-
Andi Kleen authored
Use inline code bitmaps <= BITS_PER_LONG in bitmap_weight. This gives _much_ better code. Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Andi Kleen authored
It was originally added for 2.4 oprofile, but 2.6 oprofile doesn't need that anymore. Shouldn't be any use in tree anymore and it doesn't make much sense to export the ia32 syscalls when the main syscalls are not exported. I think Adrian Bunk asked for removing it several times. Also included hunk from Adrian to remove the .globl ia32_sys_call_table Signed-off-by:
-
Andi Kleen authored
Early development of x86-64 Linux was in CVS, but that hasn't been the case for a long time now. Remove the obsolete $Id$s. Signed-off-by:
-
Don Zickus authored
Misc header cleanup for nmi watchdog. Signed-off-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
-
Ingo Molnar authored
fix unlikely profiling in vsyscalls ... Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Jan Beulich authored
Since END()/ENDPROC() are now available, add respective annotations to x86_64's entry.S. This should help debugging activities. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Andi Kleen authored
Sometimes e.g. with crashme the compat layer warnings can be noisy. Add a way to turn them off by gating all output through compat_printk that checks a global sysctl. The default is not changed. Signed-off-by:
-
Andi Kleen authored
Fix initcall at 0xffffffff806c5b89: pci_iommu_init+0x0/0x53c(): returned with error code -1 Return -ENODEV instead when the IOMMU is not used. Signed-off-by:
-
Jan Beulich authored
Simplify (remove duplication of) code in ioapic_register_intr(). Signed-off-by:
-
Jan Beulich authored
Since assign_irq_vector() can be called at runtime, its access of static variables should be protected by a lock. Signed-off-by:
-
Andi Kleen authored
- Factor out the duplicated access/cache code into a single file * Shared between i386/x86-64. - Share flush code between AGP and IOMMU * Fix a bug: AGP didn't wait for end of flush before - Drop 8 northbridges limit and allocate dynamically - Add lock to serialize AGP and IOMMU GART flushes - Add PCI ID for next AMD northbridge - Random related cleanups The old K8 NUMA discovery code is unchanged. New systems should all use SRAT for this. Cc: "Navin Boppuri" <navin.boppuri@newisys.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by:
-
Jon Mason authored
A trivial change to have gart_unmap_sg call gart_unmap_single directly, instead of bouncing through the dma_unmap_single wrapper in dma-mapping.h. This change required moving the gart_unmap_single above gart_unmap_sg, and under gart_map_single (which seems a more logical place that its current location IMHO). Signed-off-by:
Jon Mason <jdmason@us.ibm.com> Signed-off-by:
-
Andi Kleen authored
Previously we would just silently provide 64 bit services for this to 32bit processes. I also added all the other cases explicitely to the ptrace compat wrapper to make sure this doesn't happen again. And removed one bogus check in the wrapper. Signed-off-by:
-
Mike Waychison authored
Allow search for a contiguous block of iommu space to cross the next_bit marker if we have already committed ourselves to flushing the gart. There shouldn't be any reason why we'd restrict the search. Signed-off-by:
Mike Waychison <mikew@google.com> Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
-
Ingo Molnar authored
enable large bzImages on x86_64. (fix is from x86's build.c) Using this patch i have successfully built and booted an allyesconfig 13MB+ bzImage on x86_64 too: $ size64 vmlinux text data bss dec hex filename 23444831 8202642 3439360 35086833 21761f1 vmlinux -rw-rw-r-- 1 mingo mingo 13121740 Apr 19 09:32 arch/x86_64/boot/bzImage Signed-off-by: -
Andi Kleen authored
It's only needed for three system calls, no need to maintain a full list forever. Signed-off-by:
-
Jon Mason authored
Replace hard coded DMA masks with #defines from include/linux/dma-mapping.h Signed-off-by:
-
Gerd Hoffmann authored
Changes are largely identical to the i386 version: * alternative #define are moved to the new alternative.h file. * one new elf section with pointers to the lock prefixes which can be nop'ed out for non-smp. * two new elf sections simliar to the "classic" alternatives to replace SMP code with simpler UP code. * fixup headers to use alternative.h instead of defining their own LOCK / LOCK_PREFIX macros. The patch reuses the i386 version of the alternatives code to avoid code duplication. The code in alternatives.c was shuffled around a bit to reduce the number of #ifdefs needed. It also got some tweaks needed for x86_64 (vsyscall page handling) and new features (noreplacement option which was x86_64 only up to now). Debug printk's are changed from compile-time to runtime. Loosely based on a early version from Bastian Blank <waldi@debian.org> Signed-off-by:
Gerd Hoffmann <kraxel@suse.de> Signed-off-by:
-
Andi Kleen authored
Intel systems report the cache level data from CPUID 4 in sysfs. Add a CPUID 4 emulation for AMD CPUs to report the same information for them. This allows programs to read this information in a uniform way. The AMD way to report this is less flexible so some assumptions are hardcoded (e.g. no L3) Signed-off-by:
-
Andi Kleen authored
Previously the apicid<->coreid split was computed based on the max number of cores. Now use a new CPUID AMD defined for that. On most systems right now it should be 0 and the old method will be used. Signed-off-by:
-
Andi Kleen authored
Inspired from i386 changes Signed-off-by:
-
ravikiran thirumalai authored
vSMPowered systems use apic_cluster too. Forcing apic_physflat works on these systems too, but only if we change phys_pkg_id to use hard_smp_prcoessor_id() instead of cpuid_ebx. I am guessing other multichassi cluster systems would need this too. Signed-off-by:
ravikiran thirumalai <kiran@scalex86.org> Signed-off-by:
-
Andi Kleen authored
Enable some hwmon drivers as modules and tulip and stack unwinding Kernel image should be somewhat bigger now because of the unwind information being included, but you'll get exact backtraces for that. Signed-off-by:
-
Malcolm Parsons authored
binfmt_flat.c calls set_personality with PER_LINUX as the personality. On the arm architecture this results in the program running in 26bit usermode. PER_LINUX_32BIT should be used instead. This doesn't affect other architectures that use binfmt_flat. Signed-off-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
-
Greg Ungerer authored
Change enable_irq() macro to be a statement, not expression. Signed-off-by:
-
Greg Ungerer authored
Fix PLL setting for the Coldfire 5249 CPU. This brings it into line with the new style frequency configuration of m68knommu parts. Signed-off-by:
-
Greg Ungerer authored
Fix flush code for the ColdFire 5206/5206e/5272 cases. Add support for the new ColdFire 532x CPU family Signed-off-by:
-
Philippe De Muyter authored
Here is a patch to the system call handling for 5307/5272/etc to: - fix the strace support (one tested the wrong bit) - make all system calls a little bit faster by inlining set_esp0 and supporting ENOSYS out of the critical path. - remove extraneous spaces Signed-off-by:
-
Greg Ungerer authored
This patch solve a bug triggered by execvp (this function use calloc to store the argument list and gcc 3.4.x align the stack to word, not to dword). This situation aren't related to signal handling and all 2.6.x have the bug. On ColdFire targets we must force the stack to be aligned. Original patch from Andrea Tarani <andrea.tarani@gilbarco.com>, Signed-off-by:
-
Greg Ungerer authored
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by:
-
Greg Ungerer authored
Remove list of fixed clock frequency options used for configuring master clock, and make field an int. Much more flexible this way, no need to add more options for every new used freqency. Signed-off-by:
-
Greg Ungerer authored
Add support for the AVNET 5282 board. Patch submitted by Daniel Alomar <dalomar@serrasold.com>. Signed-off-by:
-
Greg Ungerer authored
Add configure support for the new Freescale 532x family of CPUs. Patch submitted by Matt Waddel <Matt.Waddel@freescale.com>. Signed-off-by:
-
Linus Torvalds authored
This reverts commits 3e3318de [PATCH] swsusp: x86_64 mark special saveable/unsaveable pages b6370d96 [PATCH] swsusp: i386 mark special saveable/unsaveable pages ce4ab001 [PATCH] swsusp: add architecture special saveable pages support because not only do they apparently cause page faults on x86, the infrastructure doesn't compile on powerpc. Signed-off-by:
-
Greg Ungerer authored
Add build support for the new Freescale 532x CPU platforms. Signed-off-by:
-
Greg Ungerer authored
Add support for the UART addressing on the new Freescale M532x CPU family. Signed-off-by:
-
Greg Ungerer authored
Add build support for new Freescale M532x CPU family timer. Signed-off-by:
-
Greg Ungerer authored
A cleanup of m68knommu/kernel/setup.c : - No need to initialize global pointers to NULL, they will have that value automatically, and they eat up space in my data segment image in FLASH. - Remove get_cpuinfo. It has been replaced by show_cpuinfo. Signed-off-by:
Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
Greg Ungerer authored
Don't rely on DEBUG having a value, check for it being defined. Signed-off-by:
-
