- 10 Nov, 2015 8 commits
-
-
Jack Wang authored
commit cff549e4 ("scsi: proper state checking and module refcount handling in scsi_device_get") the reference count of scsi device was changed, which could lead to when rmmod with at least on drive attached, SCSI error handle will run into infinite loop, and lockup the system. Fix it by remove scsi host first, this way scsi core will not send commands down after detaching SAS transport. This is a follow up fix for Benjamin's fix for pm80xx. See also: http://www.spinics.net/lists/linux-scsi/msg90088.htmlSigned-off-by:
Jack Wang <jinpu.wang@profitbricks.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Jack Wang authored
commit cff549e4 ("scsi: proper state checking and module refcount handling in scsi_device_get") the reference count of scsi device was changed, which could lead to when rmmod with at least on drive attached, SCSI error handle will run into infinite loop, and lockup the system. Fix it by remove scsi host first, this way scsi core will not send commands down after detaching SAS transport. This is a follow up fix for Benjamin's fix for pm80xx. See also: http://www.spinics.net/lists/linux-scsi/msg90088.htmlSigned-off-by:
-
Jack Wang authored
commit cff549e4 ("scsi: proper state checking and module refcount handling in scsi_device_get") , the reference count of scsi device was changed, which could lead to when rmmod with at least on drive attached, SCSI error handle will run into infinite loop, and lockup the system. Fix it by remove scsi host first, this way scsi core will not send commands down after detaching SAS transport. This is a follow up fix for Benjamin's fix for pm80xx. See also: http://www.spinics.net/lists/linux-scsi/msg90088.htmlSigned-off-by:
-
Gabriel Krisman Bertazi authored
Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Acked-by:
Brian King <brking@linux.vnet.ibm.com> Reviewed-by:
Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
Some new adapters require a special Configure Cache Parameters command to enable the adapter write cache, so send this during the adapter initialization if the adapter requires it. Signed-off-by:
-
Gabriel Krisman Bertazi authored
Add an IOA Inquiry command for Page 0xC4 during IOA initialization to collect cache capabilities, particularly to check if Sync IOA Write Cache is supported. Inquiry will happen right after Cap Inquiry on page 0xD0; and will execute only if the "Supported Pages" field in Inquiry Page 0x0 shows support for Page 0xC4. Otherwise, assume Sync IOA Write Cache is not supported. Signed-off-by:
-
Gabriel Krisman Bertazi authored
According to the IPR specification, Inhibit Underlength Checking bit must be disabled when issuing commands to vsets. Enabling it in this case might cause SCSI commands to fail with an Illegal Request, so make sure we keep this bit cleared when resource is a vset. Signed-off-by:
Manoj Kumar <manoj@linux.vnet.ibm.com> Acked-by:
-
Gabriel Krisman Bertazi authored
Add a holding pattern prior to collecting dump data, to wait for the IOA indication that the Mailbox register is stable and won't change without an explicit reset. This ensures we'll be collecting meaningful dump data, even when dumping right after an adapter reset. In the event of a timeout, we still force the dump, since a partial dump still might be useful. Signed-off-by:
-
- 09 Nov, 2015 32 commits
-
-
Yaniv Gardi authored
New revisions of UFS host controller supports the new UniPro hardware controller (referred as QUniPro). This patch adds the support to enable this new UniPro controller hardware. This change also adds power optimization for bus scaling feature, as well as support for HS-G3 power mode. Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by:
Gilad Broner <gbroner@codeaurora.org> Signed-off-by:
Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
Yaniv Gardi authored
Adds support for configuring and reading the test bus and debug registers. This change also adds another vops in order to print the debug registers. Reviewed-by:
-
Yaniv Gardi authored
This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS a platform device. In order to do so a few additional changes are required: 1. The ufshcd-pltfrm is no longer serves as a platform device. Now it only serves as a group of platform APIs such as PM APIs (runtime suspend/resume, system suspend/resume etc), parsers of clocks, regulators and pm_levels from DT. 2. What used to be the old platform "probe" is now "only" a pltfrm_init() routine, that does exactly the same, but only being called by the new probe function of the UFS variant. Reviewed-by:
Rob Herring <robherring2@gmail.com> Reviewed-by:
Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by:
-
Yaniv Gardi authored
In order to simplify the code a set of wrapper functions is created to test and call each of the variant operations. Reviewed-by:
Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by:
-
Yaniv Gardi authored
This patch adds ufshcd_get_variant() and ufshcd_set_variant() routines in order to get/set the variant specific data. Reviewed-by:
-
Yaniv Gardi authored
This change is required in order to be able to build the component as a module. Reviewed-by:
-
Yaniv Gardi authored
This change fixes a compilation warning that happens if SCSI_UFS_QCOM is compiled as a module. Also this patch fixes an error happens when insmod the module: "ufs_qcom: module license 'unspecified' taints kernel." Reviewed-by:
-
Yaniv Gardi authored
Export the following functions in order to avoid build errors when the component PHY_QCOM_UFS is compiled as a module: ERROR: "ufs_qcom_phy_disable_ref_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined! ERROR: "ufs_qcom_phy_enable_ref_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined! ERROR: "ufs_qcom_phy_is_pcs_ready" [drivers/scsi/ufs/ufs-qcom.ko] undefined! ERROR: "ufs_qcom_phy_disable_iface_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined! ERROR: "ufs_qcom_phy_start_serdes" [drivers/scsi/ufs/ufs-qcom.ko] undefined! ERROR: "ufs_qcom_phy_calibrate_phy" [drivers/scsi/ufs/ufs-qcom.ko] undefined! ERROR: "ufs_qcom_phy_enable_dev_ref_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined! ERROR: "ufs_qcom_phy_set_tx_lane_enable" [drivers/scsi/ufs/ufs-qcom.ko] undefined! ERROR: "ufs_qcom_phy_disable_dev_ref_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined! ERROR: "ufs_qcom_phy_save_controller_version" [drivers/scsi/ufs/ufs-qcom.ko] undefined! ERROR: "ufs_qcom_phy_enable_iface_clk" [drivers/scsi/ufs/ufs-qcom.ko] undefined! make[1]: *** [__modpost] Error 1 Reviewed-by:
-
Tomas Henzl authored
This patch fixes a 'general protection fault' issue by moving the attribute to where it was likely meant. Signed-off-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
Don Brace <don.brace@pmcs.com> Signed-off-by:
-
Don Brace authored
Reviewed-by:
Justin Lindley <justin.lindley@pmcs.com> Reviewed-by:
Scott Teel <scott.teel@pmcs.com> Reviewed-by:
Kevin Barnett <kevin.barnett@pmcs.com> Reviewed-by: Gerry Morong <gerry.morong.pmcs.com> Reviewed-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by:
-
Kevin Barnett authored
Reviewed-by:
-
Rasmus Villemoes authored
path_info_show() seems to be broken in multiple ways. First, there's 817 return snprintf(buf, output_len+1, "%s%s%s%s%s%s%s%s", 818 path[0], path[1], path[2], path[3], 819 path[4], path[5], path[6], path[7]); so hopefully output_len contains the combined length of the eight strings. Otherwise, snprintf will stop copying to the output buffer, but still end up reporting that combined length - which in turn would result in user-space getting a bunch of useless nul bytes (thankfully the upper sysfs layer seems to clear the output buffer before passing it to the various ->show routines). But we have 767 output_len = snprintf(path[i], 768 PATH_STRING_LEN, "[%d:%d:%d:%d] %20.20s ", 769 h->scsi_host->host_no, 770 hdev->bus, hdev->target, hdev->lun, 771 scsi_device_type(hdev->devtype)); so output_len at best contains the length of the last string printed. Inside the loop, we then otherwise add to output_len. By magic, we still have PATH_STRING_LEN available every time... This wouldn't really be a problem if the bean-counting has been done properly and each line actually does fit in 50 bytes, and maybe it does, but I don't immediately see why. Suppose we end up taking this branch: 802 output_len += snprintf(path[i] + output_len, 803 PATH_STRING_LEN, 804 "BOX: %hhu BAY: %hhu %s\n", 805 box, bay, active); An optimistic estimate says this uses strlen("BOX: 1 BAY: 2 Active\n") which is 21. Now add the 20 bytes guaranteed by the %20.20s and then some for the rest of that format string, and we're easily over 50 bytes. I don't think we can get over 100 bytes even being pessimistic, so this just means we'll scribble into the next path[i+1] and maybe get that overwritten later, leading to some garbled output (in fact, since we'd overwrite the previous string's 0-terminator, we could end up with one very long string and then print various suffixes of that, leading to much more than 400 bytes of output). Except of course when we're filling path[7], where overrunning it means writing random stuff to the kernel stack, which is usually a lot of fun. We can fix all of that and get rid of the 400 byte stack buffer by simply writing directly to the given output buffer, which the upper layer guarantees is at least PAGE_SIZE. s[c]nprintf doesn't care where it is writing to, so this doesn't make the spin lock hold time any longer. Using scnprintf ensures that output_len always represents the number of bytes actually written to the buffer, so we'll report the proper amount to the upper layer. Reviewed-by:Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Don Brace authored
Reviewed-by:
-
Scott Teel authored
When external target arrays are present, disable the firmware's normal behavior of returning a cached copy of the report lun data, and force it to collect new data each time we request a report luns. This is necessary for external arrays, since there may be no reliable signal from the external array to the smart array when lun configuration changes, and thus when driver requests report luns, it may be stale data. Use diag options to turn off RPL data caching. Reviewed-by:
-
Scott Teel authored
There are problems with getting configuration change notification in pass-through RAID environments. So, activate flag h->discovery_polling when one of these devices is detected in update_scsi_devices. After discovery_polling is set, execute a report luns from rescan_controller_worker (every 30 seconds). If the data from report_luns is different than last time (binary compare), execute a full rescan via update_scsi_devices. Reviewed-by:
-
Scott Teel authored
We don't need to create fake enclosure devices at Lun0 in external target array configurations anymore. This was done to support Pre-SCSI rev 5 controllers that didn't suppoprt report luns commands, so the SCSI layer had to scan targets. If there was no LUN at LUN 0, then the target scan would stop, and move to the next target. Lun0 enclosure device was added to prevent sparsely-numbered LUNs from being missed. Reviewed-by:
-
Scott Teel authored
External array LUNs must use target and lun numbers assigned by the external array. So the driver must treat these differently from local LUNs when assigning lun/target. LUN's 'model' field has been used to detect Lun types that need special treatment, but the desire is to eliminate the need to reference specific array models, and support any external array. Pass-through RAID (PTRAID) luns are not luns of the local controller, so they are not reported in LUN count of command 'ID controller'. However, they ARE reported in "Report logical Luns" command. Local luns are listed first, then PTRAID LUNs. The number of luns from "Report LUNs" in excess of those reported by 'ID controller' are therefore the PTRAID LUNS. We can now remove function is_ext_target, and the 'white list' array of supported model names. Reviewed-by:
-
Kevin Barnett authored
preparation for adding the sas transport class Reviewed-by:
-
Kevin Barnett authored
setup for sas transport. Need to set the bus and target accordingly. Reviewed-by:
-
Don Brace authored
use an index into vpd data for SAS/SATA drives Reviewed-by:
-
Kevin Barnett authored
simplify checking for logical/physical devices Reviewed-by:
-
Kevin Barnett authored
remove repeated calculation that checks for physical or logical devices. Reviewed-by:
-
Kevin Barnett authored
remove macros and cleanup device exposure checking Reviewed-by:
-
Don Brace authored
Reviewed-by:
-
Don Brace authored
The driver is using two MACROs which seemingly are looking in the wrong location for the device_flags returned from CISS_REPORT_PHYS. Both MACROs, NON_DISK_PHYS_DEV and PHYS_IOACCEL, are using the pointer returned from figure_lunaddrbytes which is the address of the LUN.lunid element in the extended CISS_REPORT_PHYS. But the MACROS are using offsets beyond the range of the element (offset 17 of an 8 byte element). These MACROs actually are looking at the correct location but they fail static checker analysis. It also will not work if any new elements are added to the extended LUN structure. Change the code to use the structure elements directly since this MACRO is only used in one location. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
-
Scott Teel authored
Set reset type in device_reset_handler to do either logical unit reset for logical devices, or physical target reset, for physical devices. Reviewed-by:
-
Don Brace authored
Fix a NULL pointer issue in the driver when devices are removed during a reset. Signed-off-by:
-
Don Brace authored
handle block counts of 0. Cleanup block and block count calculations. Reviewed-by:
-
Don Brace authored
Abandon and reschedule rescan process only if device inquiries fail due to mem alloc failures, which are likely to occur for all devices. Otherwise, skip device if inquiry fails for other reasons, and continue rescanning process for other devices. Reviewed-by:
-
Don Brace authored
Reviewed-by:
-
Don Brace authored
Reviewed-by:
-
Don Brace authored
Check for NULLs. Reviewed-by:
-
