- 03 Dec, 2012 11 commits
-
-
Clemens Ladisch authored
commit e99ddfde upstream. Commit 88a8516a (ALSA: usbaudio: implement USB autosuspend) added autosuspend code to all files making up the snd-usb-audio driver. However, midi.c is part of snd-usb-lib and is also used by other drivers, not all of which support autosuspend. Thus, calls to usb_autopm_get_interface() could fail, and this unexpected error would result in the MIDI output being completely unusable. Make it work by ignoring the error that is expected with drivers that do not support autosuspend. Reported-by:
Colin Fletcher <colin.m.fletcher@googlemail.com> Reported-by:
Devin Venable <venable.devin@gmail.com> Reported-by:
Dr Nick Bailey <nicholas.bailey@glasgow.ac.uk> Reported-by:
Jannis Achstetter <jannis_achstetter@web.de> Reported-by:
Rui Nuno Capela <rncbc@rncbc.org> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maciej Patelczyk authored
commit 49bd665c upstream. SATA MICROCODE DOWNALOAD fails on isci driver. After receiving Register Device to Host (FIS 0x34) frame Initiator resets phy. In the frame handler routine response (FIS 0x34) was copied into wrong buffer and upper layer did not receive any answer which resulted in timeout and reset. This patch corrects this bug. Signed-off-by:
Maciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by:
Lukasz Dorau <lukasz.dorau@intel.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Bing Zhao authored
commit dd321acd upstream. When host_sleep_config command fails we should return error to MMC core to indicate the failure for our device. The misspelled variable is also removed as it's redundant. Signed-off-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Albert Pool authored
commit a485e827 upstream. This is an ISY IWL 2000. Probably a clone of Belkin F7D1102 050d:1102. Its FCC ID is the same. Signed-off-by:
Albert Pool <albertpool@solcon.nl> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Boris Ostrovsky authored
commit 36c46ca4 upstream. Add valid patch size for family 16h processors. [ hpa: promoting to urgent/stable since it is hw enabling and trivial ] Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@amd.com> Acked-by:
Andreas Herrmann <herrmann.der.user@googlemail.com> Link: http://lkml.kernel.org/r/1353004910-2204-1-git-send-email-boris.ostrovsky@amd.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Robert Richter authored
commit 10226238 upstream. In 32 bit the stack address provided by kernel_stack_pointer() may point to an invalid range causing NULL pointer access or page faults while in NMI (see trace below). This happens if called in softirq context and if the stack is empty. The address at ®s->sp is then out of range. Fixing this by checking if regs and ®s->sp are in the same stack context. Otherwise return the previous stack pointer stored in struct thread_info. If that address is invalid too, return address of regs. BUG: unable to handle kernel NULL pointer dereference at 0000000a IP: [<c1004237>] print_context_stack+0x6e/0x8d *pde = 00000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 4434, comm: perl Not tainted 3.6.0-rc3-oprofile-i386-standard-g4411a05 #4 Hewlett-Packard HP xw9400 Workstation/0A1Ch EIP: 0060:[<c1004237>] EFLAGS: 00010093 CPU: 0 EIP is at print_context_stack+0x6e/0x8d EAX: ffffe000 EBX: 0000000a ECX: f4435f94 EDX: 0000000a ESI: f4435f94 EDI: f4435f94 EBP: f5409ec0 ESP: f5409ea0 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 0000000a CR3: 34ac9000 CR4: 000007d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Process perl (pid: 4434, ti=f5408000 task=f5637850 task.ti=f4434000) Stack: 000003e8 ffffe000 00001ffc f4e39b00 00000000 0000000a f4435f94 c155198c f5409ef0 c1003723 c155198c f5409f04 00000000 f5409edc 00000000 00000000 f5409ee8 f4435f94 f5409fc4 00000001 f5409f1c c12dce1c 00000000 c155198c Call Trace: [<c1003723>] dump_trace+0x7b/0xa1 [<c12dce1c>] x86_backtrace+0x40/0x88 [<c12db712>] ? oprofile_add_sample+0x56/0x84 [<c12db731>] oprofile_add_sample+0x75/0x84 [<c12ddb5b>] op_amd_check_ctrs+0x46/0x260 [<c12dd40d>] profile_exceptions_notify+0x23/0x4c [<c1395034>] nmi_handle+0x31/0x4a [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45 [<c13950ed>] do_nmi+0xa0/0x2ff [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45 [<c13949e5>] nmi_stack_correct+0x28/0x2d [<c1029dc5>] ? ftrace_define_fields_irq_handler_entry+0x45/0x45 [<c1003603>] ? do_softirq+0x4b/0x7f <IRQ> [<c102a06f>] irq_exit+0x35/0x5b [<c1018f56>] smp_apic_timer_interrupt+0x6c/0x7a [<c1394746>] apic_timer_interrupt+0x2a/0x30 Code: 89 fe eb 08 31 c9 8b 45 0c ff 55 ec 83 c3 04 83 7d 10 00 74 0c 3b 5d 10 73 26 3b 5d e4 73 0c eb 1f 3b 5d f0 76 1a 3b 5d e8 73 15 <8b> 13 89 d0 89 55 e0 e8 ad 42 03 00 85 c0 8b 55 e0 75 a6 eb cc EIP: [<c1004237>] print_context_stack+0x6e/0x8d SS:ESP 0068:f5409ea0 CR2: 000000000000000a ---[ end trace 62afee3481b00012 ]--- Kernel panic - not syncing: Fatal exception in interrupt V2: * add comments to kernel_stack_pointer() * always return a valid stack address by falling back to the address of regs Reported-by:
Yang Wei <wei.yang@windriver.com> Signed-off-by:
Robert Richter <robert.richter@amd.com> Link: http://lkml.kernel.org/r/20120912135059.GZ8285@erda.amd.comSigned-off-by:
-
David S. Miller authored
commit 450faacc upstream. Documentation/networking/ifenslave.c: In function ‘if_getconfig’: Documentation/networking/ifenslave.c:508:14: warning: variable ‘mtu’ set but not used [-Wunused-but-set-variable] Documentation/networking/ifenslave.c:508:6: warning: variable ‘metric’ set but not used [-Wunused-but-set-variable] The purpose of this function is to simply print out the values it probes, so... Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Danny Kukawka authored
commit c718a546 upstream. Fix several -Wuninitialized compiler warnings by changing the order of getting modedb in riva_update_default_var() to set first the fallback and then the prefered timing. Signed-off-by:
Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by:
Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Danny Kukawka authored
commit cecd353a upstream. Set CommandMailbox with memset before use it. Fix for: drivers/block/DAC960.c: In function ‘DAC960_V1_EnableMemoryMailboxInterface’: arch/x86/include/asm/io.h:61:1: warning: ‘CommandMailbox.Bytes[12]’ may be used uninitialized in this function [-Wuninitialized] drivers/block/DAC960.c:1175:30: note: ‘CommandMailbox.Bytes[12]’ was declared here Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Danny Kukawka authored
commit bca505f1 upstream. Fixed compiler warning: comparison between ‘DAC960_V2_IOCTL_Opcode_T’ and ‘enum <anonymous>’ Renamed enum, added a new enum for SCSI_10.CommandOpcode in DAC960_V2_ProcessCompletedCommand(). Signed-off-by:
-
Takashi Iwai authored
commit 08ef7949 upstream. The drivers don't require the exclusive irqs. Let's fix the deprecated warnings. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
- 26 Nov, 2012 29 commits
-
-
Greg Kroah-Hartman authored
-
Ram Pai authored
commit 47ea91b4 upstream. __find_resource() incorrectly returns a resource window which overlaps an existing allocated window. This happens when the parent's resource-window spans 0x00000000 to 0xffffffff and is entirely allocated to all its children resource-windows. __find_resource() looks for gaps in resource allocation among the children resource windows. When it encounters the last child window it blindly tries the range next to one allocated to the last child. Since the last child's window ends at 0xffffffff the calculation overflows, leading the algorithm to believe that any window in the range 0x0000000 to 0xfffffff is available for allocation. This leads to a conflicting window allocation. Michal Ludvig reported this issue seen on his platform. The following patch fixes the problem and has been verified by Michal. I believe this bug has been there for ages. It got exposed by git commit 2bbc6942 ("PCI : ability to relocate assigned pci-resources") Signed-off-by:
Ram Pai <linuxram@us.ibm.com> Tested-by:
Michal Ludvig <mludvig@logix.net.nz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
-
Yinghai Lu authored
commit a4ac9fea upstream. During debug of one SRIOV enabled hotplug device, we found found that add_size is not passed properly. The device has devices under two level bridges: +-[0000:80]-+-00.0-[81-8f]-- | +-01.0-[90-9f]-- | +-02.0-[a0-af]----00.0-[a1-a3]--+-02.0-[a2]--+-00.0 Oracle Corporation Device | | \-03.0-[a3]--+-00.0 Oracle Corporation Device Which means later the parent bridge will not try to add a big enough range: [ 557.455077] pci 0000:a0:00.0: BAR 14: assigned [mem 0xf9000000-0xf93fffff] [ 557.461974] pci 0000:a0:00.0: BAR 15: assigned [mem 0xf6000000-0xf61fffff pref] [ 557.469340] pci 0000:a1:02.0: BAR 14: assigned [mem 0xf9000000-0xf91fffff] [ 557.476231] pci 0000:a1:02.0: BAR 15: assigned [mem 0xf6000000-0xf60fffff pref] [ 557.483582] pci 0000:a1:03.0: BAR 14: assigned [mem 0xf9200000-0xf93fffff] [ 557.490468] pci 0000:a1:03.0: BAR 15: assigned [mem 0xf6100000-0xf61fffff pref] [ 557.497833] pci 0000:a1:03.0: BAR 14: can't assign mem (size 0x200000) [ 557.504378] pci 0000:a1:03.0: failed to add optional resources res=[mem 0xf9200000-0xf93fffff] [ 557.513026] pci 0000:a1:02.0: BAR 14: can't assign mem (size 0x200000) [ 557.519578] pci 0000:a1:02.0: failed to add optional resources res=[mem 0xf9000000-0xf91fffff] It turns out we did not calculate size1 properly. static resource_size_t calculate_memsize(resource_size_t size, resource_size_t min_size, resource_size_t size1, resource_size_t old_size, resource_size_t align) { if (size < min_size) size = min_size; if (old_size == 1 ) old_size = 0; if (size < old_size) size = old_size; size = ALIGN(size + size1, align); return size; } We should not pass add_size with min_size in calculate_memsize since that will make add_size not contribute final add_size. So just pass add_size with size1 to calculate_memsize(). With this change, we should have chance to remove extra addon in pci_reassign_resource. Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Andrew Worsley <amworsley@gmail.com> Signed-off-by:
-
Ram Pai authored
commit 2bbc6942 upstream. Currently pci-bridges are allocated enough resources to satisfy their immediate requirements. Any additional resource-requests fail if additional free space, contiguous to the one already allocated, is not available. This behavior is not reasonable since sufficient contiguous resources, that can satisfy the request, are available at a different location. This patch provides the ability to expand and relocate a allocated resource. v2: Changelog: Fixed size calculation in pci_reassign_resource() v3: Changelog : Split this patch. The resource.c changes are already upstream. All the pci driver changes are in here. Signed-off-by:
-
Dave Jones authored
commit 88a693b5 upstream. =============================== [ INFO: suspicious RCU usage. ] 3.5.0-rc1+ #63 Not tainted ------------------------------- security/selinux/netnode.c:178 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by trinity-child1/8750: #0: (sel_netnode_lock){+.....}, at: [<ffffffff812d8f8a>] sel_netnode_sid+0x16a/0x3e0 stack backtrace: Pid: 8750, comm: trinity-child1 Not tainted 3.5.0-rc1+ #63 Call Trace: [<ffffffff810cec2d>] lockdep_rcu_suspicious+0xfd/0x130 [<ffffffff812d91d1>] sel_netnode_sid+0x3b1/0x3e0 [<ffffffff812d8e20>] ? sel_netnode_find+0x1a0/0x1a0 [<ffffffff812d24a6>] selinux_socket_bind+0xf6/0x2c0 [<ffffffff810cd1dd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff810cdb55>] ? lock_release_holdtime.part.9+0x15/0x1a0 [<ffffffff81093841>] ? lock_hrtimer_base+0x31/0x60 [<ffffffff812c9536>] security_socket_bind+0x16/0x20 [<ffffffff815550ca>] sys_bind+0x7a/0x100 [<ffffffff816c03d5>] ? sysret_check+0x22/0x5d [<ffffffff810d392d>] ? trace_hardirqs_on_caller+0x10d/0x1a0 [<ffffffff8133b09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff816c03a9>] system_call_fastpath+0x16/0x1b This patch below does what Paul McKenney suggested in the previous thread. Signed-off-by:
Dave Jones <davej@redhat.com> Reviewed-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by:
Paul Moore <paul@paul-moore.com> Cc: Eric Paris <eparis@parisplace.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Jan Kara authored
commit 361d94a3 upstream. Calls into reiserfs journalling code and reiserfs_get_block() need to be protected with write lock. We remove write lock around calls to high level quota code in the next patch so these paths would suddently become unprotected. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
commit 7af11686 upstream. Calls into highlevel quota code cannot happen under the write lock. These calls take dqio_mutex which ranks above write lock. So drop write lock before calling back into quota code. Signed-off-by:
-
Jan Kara authored
commit b9e06ef2 upstream. In reiserfs_quota_on() we do quite some work - for example unpacking tail of a quota file. Thus we have to hold write lock until a moment we call back into the quota code. Signed-off-by:
-
Jan Kara authored
commit 3bb3e1fc upstream. When remounting reiserfs dquot_suspend() or dquot_resume() can be called. These functions take dqonoff_mutex which ranks above write lock so we have to drop it before calling into quota code. Signed-off-by:
-
Bryan Schumaker authored
commit 399f11c3 upstream. Currently, we will schedule session recovery and then return to the caller of nfs4_handle_exception. This works for most cases, but causes a hang on the following test case: Client Server ------ ------ Open file over NFS v4.1 Write to file Expire client Try to lock file The server will return NFS4ERR_BADSESSION, prompting the client to schedule recovery. However, the client will continue placing lock attempts and the open recovery never seems to be scheduled. The simplest solution is to wait for session recovery to run before retrying the lock. Signed-off-by:
Bryan Schumaker <bjschuma@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Daniel Vetter authored
commit a9193983 upstream. The overlay on the i830M has a peculiar failure mode: It works the first time around after boot-up, but consistenly hangs the second time it's used. Chris Wilson has dug out a nice errata: "1.5.12 Clock Gating Disable for Display Register Address Offset: 06200h–06203h "Bit 3 Ovrunit Clock Gating Disable. 0 = Clock gating controlled by unit enabling logic 1 = Disable clock gating function DevALM Errata ALM049: Overlay Clock Gating Must be Disabled: Overlay & L2 Cache clock gating must be disabled in order to prevent device hangs when turning off overlay.SW must turn off Ovrunit clock gating (6200h) and L2 Cache clock gating (C8h)." Now I've nowhere found that 0xc8 register and hence couldn't apply the l2 cache workaround. But I've remembered that part of the magic that the OVERLAY_ON/OFF commands are supposed to do is to rearrange cache allocations so that the overlay scaler has some scratch space. And while pondering how that could explain the hang the 2nd time we enable the overlay, I've remembered that the old ums overlay code did _not_ issue the OVERLAY_OFF cmd. And indeed, disabling the OFF cmd results in the overlay working flawlessly, so I guess we can workaround the lack of the above workaround by simply never disabling the overlay engine once it's enabled. Note that we have the first part of the above w/a already implemented in i830_init_clock_gating - leave that as-is to avoid surprises. v2: Add a comment in the code. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47827Tested-by:
Rhys <rhyspuk@gmail.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> [bwh: Backported to 3.2: - Adjust context - s/intel_ring_emit(ring, /OUT_RING(/] Signed-off-by:
-
Mirko Lindner authored
commit d663d181 upstream. Re-enable interrupts if it is not our interrupt Signed-off-by:
Mirko Lindner <mlindner@marvell.com> Signed-off-by:
-
Tim Sally authored
commit 5f5b331d upstream. The issue occurs when eCryptfs is mounted with a cipher supported by the crypto subsystem but not by eCryptfs. The mount succeeds and an error does not occur until a write. This change checks for eCryptfs cipher support at mount time. Resolves Launchpad issue #338914, reported by Tyler Hicks in 03/2009. https://bugs.launchpad.net/ecryptfs/+bug/338914Signed-off-by:
Tim Sally <tsally@atomicpeace.com> Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
-
Tyler Hicks authored
commit 069ddcda upstream. When the eCryptfs mount options do not include '-o acl', but the lower filesystem's mount options do include 'acl', the MS_POSIXACL flag is not flipped on in the eCryptfs super block flags. This flag is what the VFS checks in do_last() when deciding if the current umask should be applied to a newly created inode's mode or not. When a default POSIX ACL mask is set on a directory, the current umask is incorrectly applied to new inodes created in the directory. This patch ignores the MS_POSIXACL flag passed into ecryptfs_mount() and sets the flag on the eCryptfs super block depending on the flag's presence on the lower super block. Additionally, it is incorrect to allow a writeable eCryptfs mount on top of a read-only lower mount. This missing check did not allow writes to the read-only lower mount because permissions checks are still performed on the lower filesystem's objects but it is best to simply not allow a rw mount on top of ro mount. However, a ro eCryptfs mount on top of a rw mount is valid and still allowed. https://launchpad.net/bugs/1009207Signed-off-by:
Stefan Beller <stefanbeller@googlemail.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
-
Jan Safrata authored
commit 0658a336 upstream. The use of kfree(serial) in error cases of usb_serial_probe was invalid - usb_serial structure allocated in create_serial() gets reference of usb_device that needs to be put, so we need to use usb_serial_put() instead of simple kfree(). Signed-off-by:
Jan Safrata <jan.nikitenko@gmail.com> Acked-by:
Johan Hovold <jhovold@gmail.com> Cc: Richard Retanubun <richardretanubun@ruggedcom.com> Signed-off-by:
-
Ulrich Weber authored
commit 38fe36a2 upstream. ICMP tuples have id in src and type/code in dst. So comparing src.u.all with dst.u.all will always fail here and ip_xfrm_me_harder() is called for every ICMP packet, even if there was no NAT. Signed-off-by:
Ulrich Weber <ulrich.weber@sophos.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jozsef Kadlecsik authored
commit 64f509ce upstream. Clients should not send such packets. By accepting them, we open up a hole by wich ephemeral ports can be discovered in an off-path attack. See: "Reflection scan: an Off-Path Attack on TCP" by Jan Wrobel, http://arxiv.org/abs/1201.2074Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Jozsef Kadlecsik authored
commit 4a70bbfa upstream. We spare nothing by not validating the sequence number of dataless ACK packets and enabling it makes harder off-path attacks. See: "Reflection scan: an Off-Path Attack on TCP" by Jan Wrobel, http://arxiv.org/abs/1201.2074Signed-off-by:
-
Jean Delvare authored
commit b1e0d8b7 upstream. The correct syntax for gcc -x is "gcc -x assembler", not "gcc -xassembler". Even though the latter happens to work, the former is what is documented in the manual page and thus what gcc wrappers such as icecream do expect. This isn't a cosmetic change. The missing space prevents icecream from recognizing compilation tasks it can't handle, leading to silent kernel miscompilations. Besides me, credits go to Michael Matz and Dirk Mueller for investigating the miscompilation issue and tracking it down to this incorrect -x parameter syntax. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Acked-by:
Ingo Molnar <mingo@kernel.org> Cc: Bernhard Walle <bernhard@bwalle.de> Cc: Michal Marek <mmarek@suse.cz> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Michal Schmidt authored
commit aee77e4a upstream. The r8169 driver currently limits the DMA burst for TX to 1024 bytes. I have a box where this prevents the interface from using the gigabit line to its full potential. This patch solves the problem by setting TX_DMA_BURST to unlimited. The box has an ASRock B75M motherboard with on-board RTL8168evl/8111evl (XID 0c900880). TSO is enabled. I used netperf (TCP_STREAM test) to measure the dependency of TX throughput on MTU. I did it for three different values of TX_DMA_BURST ('5'=512, '6'=1024, '7'=unlimited). This chart shows the results: http://michich.fedorapeople.org/r8169/r8169-effects-of-TX_DMA_BURST.png Interesting points: - With the current DMA burst limit (1024): - at the default MTU=1500 I get only 842 Mbit/s. - when going from small MTU, the performance rises monotonically with increasing MTU only up to a peak at MTU=1076 (908 MBit/s). Then there's a sudden drop to 762 MBit/s from which the throughput rises monotonically again with further MTU increases. - With a smaller DMA burst limit (512): - there's a similar peak at MTU=1076 and another one at MTU=564. - With unlimited DMA burst: - at the default MTU=1500 I get nice 940 Mbit/s. - the throughput rises monotonically with increasing MTU with no strange peaks. Notice that the peaks occur at MTU sizes that are multiples of the DMA burst limit plus 52. Why 52? Because: 20 (IP header) + 20 (TCP header) + 12 (TCP options) = 52 The Realtek-provided r8168 driver (v8.032.00) uses unlimited TX DMA burst too, except for CFG_METHOD_1 where the TX DMA burst is set to 512 bytes. CFG_METHOD_1 appears to be the oldest MAC version of "RTL8168B/8111B", i.e. RTL_GIGA_MAC_VER_11 in r8169. Not sure if this MAC version really needs the smaller burst limit, or if any other versions have similar requirements. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Signed-off-by:
-
Tom Herbert authored
[ Upstream commit baefa31d ] In commit c445477d which adds aRFS to the kernel, the CPU selected for RFS is not set correctly when CPU is changing. This is causing OOO packets and probably other issues. Signed-off-by:
Tom Herbert <therbert@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Jiri Pirko authored
[ Upstream commit a652208e ] Check (ha->addr == dev->dev_addr) is always true because dev_addr_init() sets this. Correct the check to behave properly on addr removal. Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit d4596bad ] Cc: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Xi Wang authored
[ Upstream commit 0c9f79be ] (1<<optname) is undefined behavior in C with a negative optname or optname larger than 31. In those cases the result of the shift is not necessarily zero (e.g., on x86). This patch simplifies the code with a switch statement on optname. It also allows the compiler to generate better code (e.g., using a 64-bit mask). Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Andreas Schwab authored
commit 34fa78b5 upstream. The sigaddset/sigdelset/sigismember functions that are implemented with bitfield insn cannot allow the sigset argument to be placed in a data register since the sigset is wider than 32 bits. Remove the "d" constraint from the asm statements. The effect of the bug is that sending RT signals does not work, the signal number is truncated modulo 32. Signed-off-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Johannes Berg authored
commit 43c771a1 upstream. When in world roaming mode, allow 40 MHz to be used on channels 12 and 13 so that an AP that is, e.g., using HT40+ on channel 9 (in the UK) can be used. Reported-by:
Eddie Chapman <eddie@ehuk.net> Tested-by:
Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Dan Williams authored
commit c0bc3098 upstream. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Dan Williams authored
commit fcb21645 upstream. The Dell 5800 appears to be a simple rebrand of the Novatel E362. Signed-off-by:
-
Heiko Carstens authored
commit d55c4c61 upstream. When walking page tables we need to make sure that everything is within bounds of the ASCE limit of the task's address space. Otherwise we might calculate e.g. a pud pointer which is not within a pud and dereference it. So check against TASK_SIZE (which is the ASCE limit) before walking page tables. Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
