- 30 Jul, 2020 1 commit
-
-
Sean Christopherson authored
Move the initialization of shadow NPT MMU's shadow_root_level into kvm_init_shadow_npt_mmu() and explicitly set the level in the shadow NPT MMU's role to be the TDP level. This ensures the role and MMU levels are synchronized and also initialized before __kvm_mmu_new_pgd(), which consumes the level when attempting a fast PGD switch. Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Fixes: 9fa72119 ("kvm: x86: Introduce kvm_mmu_calc_root_page_role()") Fixes: a506fdd2 ("KVM: nSVM: implement nested_svm_load_cr3() and use it for host->guest switch") Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200716034122.5998-2-sean.j.christopherson@intel.com> Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- 27 Jul, 2020 2 commits
-
-
Haiwei Li authored
Instead of using magic values, use macros. Signed-off-by:
Haiwei Li <lihaiwei@tencent.com> Message-Id: <4c072161-80dd-b7ed-7adb-02acccaa0701@gmail.com> Reviewed-by:
-
Huacai Chen authored
Commit c34b26b9 ("KVM: MIPS: clean up redundant 'kvm_run' parameters") remove the 'kvm_run' parameter in kvm_mips_complete_mmio_ load(), but forget to update all callers. Fixes: c34b26b9 ("KVM: MIPS: clean up redundant 'kvm_run' parameters") Reported-by:
kernel test robot <lkp@intel.com> Cc: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by:
Huacai Chen <chenhc@lemote.com> Message-Id: <1595154207-9787-1-git-send-email-chenhc@lemote.com> Signed-off-by:
-
- 10 Jul, 2020 25 commits
-
-
Paolo Bonzini authored
The "if" that drops the present bit from the page structure fauls makes no sense. It was added by yours truly in order to be bug-compatible with pre-existing code and in order to make the tests pass; however, the tests are wrong. The behavior after this patch matches bare metal. Reported-by:
Nadav Amit <namit@vmware.com> Signed-off-by:
-
Mohammed Gamal authored
This patch adds a new capability KVM_CAP_SMALLER_MAXPHYADDR which allows userspace to query if the underlying architecture would support GUEST_MAXPHYADDR < HOST_MAXPHYADDR and hence act accordingly (e.g. qemu can decide if it should warn for -cpu ..,phys-bits=X) The complications in this patch are due to unexpected (but documented) behaviour we see with NPF vmexit handling in AMD processor. If SVM is modified to add guest physical address checks in the NPF and guest #PF paths, we see the followning error multiple times in the 'access' test in kvm-unit-tests: test pte.p pte.36 pde.p: FAIL: pte 2000021 expected 2000001 Dump mapping: address: 0x123400000000 ------L4: 24c3027 ------L3: 24c4027 ------L2: 24c5021 ------L1: 1002000021 This is because the PTE's accessed bit is set by the CPU hardware before the NPF vmexit. This is handled completely by hardware and cannot be fixed in software. Therefore, availability of the new capability depends on a boolean variable allow_smaller_maxphyaddr which is set individually by VMX and SVM init routines. On VMX it's always set to true, on SVM it's only set to true when NPT is not enabled. CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Babu Moger <babu.moger@amd.com> Signed-off-by:Mohammed Gamal <mgamal@redhat.com> Message-Id: <20200710154811.418214-10-mgamal@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
Ignore non-present page faults, since those cannot have reserved bits set. When running access.flat with "-cpu Haswell,phys-bits=36", the number of trapped page faults goes down from 8872644 to 3978948. Signed-off-by:
-
Mohammed Gamal authored
Check guest physical address against its maximum, which depends on the guest MAXPHYADDR. If the guest's physical address exceeds the maximum (i.e. has reserved bits set), inject a guest page fault with PFERR_RSVD_MASK set. This has to be done both in the EPT violation and page fault paths, as there are complications in both cases with respect to the computation of the correct error code. For EPT violations, unfortunately the only possibility is to emulate, because the access type in the exit qualification might refer to an access to a paging structure, rather than to the access performed by the program. Trapping page faults instead is needed in order to correct the error code, but the access type can be obtained from the original error code and passed to gva_to_gpa. The corrections required in the error code are subtle. For example, imagine that a PTE for a supervisor page has a reserved bit set. On a supervisor-mode access, the EPT violation path would trigger. However, on a user-mode access, the processor will not notice the reserved bit and not include PFERR_RSVD_MASK in the error code. Co-developed-by:
-
Paolo Bonzini authored
Signed-off-by:
-
Paolo Bonzini authored
Allow vendor code to observe changes to MAXPHYADDR and start/stop intercepting page faults. Reviewed-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Paolo Bonzini authored
We would like to introduce a callback to update the #PF intercept when CPUID changes. Just reuse update_bp_intercept since VMX is already using update_exception_bitmap instead of a bespoke function. While at it, remove an unnecessary assignment in the SVM version, which is already done in the caller (kvm_arch_vcpu_ioctl_set_guest_debug) and has nothing to do with the exception bitmap. Reviewed-by:
-
Mohammed Gamal authored
Intel processors of various generations have supported 36, 39, 46 or 52 bits for physical addresses. Until IceLake introduced MAXPHYADDR==52, running on a machine with higher MAXPHYADDR than the guest more or less worked, because software that relied on reserved address bits (like KVM) generally used bit 51 as a marker and therefore the page faults where generated anyway. Unfortunately this is not true anymore if the host MAXPHYADDR is 52, and this can cause problems when migrating from a MAXPHYADDR<52 machine to one with MAXPHYADDR==52. Typically, the latter are machines that support 5-level page tables, so they can be identified easily from the LA57 CPUID bit. When that happens, the guest might have a physical address with reserved bits set, but the host won't see that and trap it. Hence, we need to check page faults' physical addresses against the guest's maximum physical memory and if it's exceeded, we need to add the PFERR_RSVD_MASK bits to the page fault error code. This patch does this for the MMU's page walks. The next patches will ensure that the correct exception and error code is produced whenever no host-reserved bits are set in page table entries. Signed-off-by:
-
Mohammed Gamal authored
Also no point of it being inline since it's always called through function pointers. So remove that. Signed-off-by:
-
Mohammed Gamal authored
This patch adds two helper functions that will be used to support virtualizing MAXPHYADDR in both kvm-intel.ko and kvm.ko. kvm_fixup_and_inject_pf_error() injects a page fault for a user-specified GVA, while kvm_mmu_is_illegal_gpa() checks whether a GPA exceeds vCPU address limits. Signed-off-by:
-
Vitaly Kuznetsov authored
The mmu_check_root() check in fast_pgd_switch() seems to be superfluous: when GPA is outside of the visible range cached_root_available() will fail for non-direct roots (as we can't have a matching one on the list) and we don't seem to care for direct ones. Also, raising #TF immediately when a non-existent GFN is written to CR3 doesn't seem to mach architectural behavior. Drop the check. Signed-off-by:
-
Vitaly Kuznetsov authored
Make nSVM code resemble nVMX where nested_vmx_load_cr3() is used on both guest->host and host->guest transitions. Also, we can now eliminate unconditional kvm_mmu_reset_context() and speed things up. Note, nVMX has two different paths: load_vmcs12_host_state() and nested_vmx_restore_host_state() and the later is used to restore from 'partial' switch to L2, it always uses kvm_mmu_reset_context(). nSVM doesn't have this yet. Also, nested_svm_vmexit()'s return value is almost always ignored nowadays. Signed-off-by:
-
Vitaly Kuznetsov authored
Undesired triple fault gets injected to L1 guest on SVM when L2 is launched with certain CR3 values. #TF is raised by mmu_check_root() check in fast_pgd_switch() and the root cause is that when kvm_set_cr3() is called from nested_prepare_vmcb_save() with NPT enabled CR3 points to a nGPA so we can't check it with kvm_is_visible_gfn(). Using generic kvm_set_cr3() when switching to nested guest is not a great idea as we'll have to distinguish between 'real' CR3s and 'nested' CR3s to e.g. not call kvm_mmu_new_pgd() with nGPA. Following nVMX implement nested-specific nested_svm_load_cr3() doing the job. To support the change, nested_svm_load_cr3() needs to be re-ordered with nested_svm_init_mmu_context(). Note: the current implementation is sub-optimal as we always do TLB flush/MMU sync but this is still an improvement as we at least stop doing kvm_mmu_reset_context(). Fixes: 7c390d35 ("kvm: x86: Add fast CR3 switch code path") Signed-off-by:
-
Vitaly Kuznetsov authored
kvm_mmu_new_pgd() refers to arch.mmu and at this point it still references arch.guest_mmu while arch.root_mmu is expected. Note, the change is effectively a nop: when !npt_enabled, nested_svm_uninit_mmu_context() does nothing (as we don't do nested_svm_init_mmu_context()) and with npt_enabled we don't do kvm_set_cr3(). However, it will matter when we move the call to kvm_mmu_new_pgd into nested_svm_load_cr3(). No functional change intended. Signed-off-by:
-
Vitaly Kuznetsov authored
As a preparatory change for implementing nSVM-specific PGD switch (following nVMX' nested_vmx_load_cr3()), introduce nested_svm_load_cr3() instead of relying on kvm_set_cr3(). No functional change intended. Signed-off-by:
-
Vitaly Kuznetsov authored
Some operations in enter_svm_guest_mode() may fail, e.g. currently we suppress kvm_set_cr3() return value. Prepare the code to proparate errors. No functional change intended. Signed-off-by:
-
Vitaly Kuznetsov authored
WARN_ON_ONCE(svm->nested.nested_run_pending) in nested_svm_vmexit() will fire if nested_run_pending remains '1' but it doesn't really need to, we are already failing and not going to run nested guest. Signed-off-by:
-
Paolo Bonzini authored
kvm_init_shadow_mmu() was actually the only function that could be called with different vcpu->arch.mmu values. Now that kvm_init_shadow_npt_mmu() is separated from kvm_init_shadow_mmu(), we always know the MMU context we need to use and there is no need to dereference vcpu->arch.mmu pointer. Based on a patch by Vitaly Kuznetsov <vkuznets@redhat.com>. Signed-off-by:
-
Vitaly Kuznetsov authored
As a preparatory change for moving kvm_mmu_new_pgd() from nested_prepare_vmcb_save() to nested_svm_init_mmu_context() split kvm_init_shadow_npt_mmu() from kvm_init_shadow_mmu(). This also makes the code look more like nVMX (kvm_init_shadow_ept_mmu()). No functional change intended. Signed-off-by:
-
Vitaly Kuznetsov authored
state_test/smm_test selftests are failing on AMD with: "Unexpected result from KVM_GET_MSRS, r: 51 (failed MSR was 0x345)" MSR_IA32_PERF_CAPABILITIES is an emulated MSR on Intel but it is not known to AMD code, we can move the emulation to common x86 code. For AMD, we basically just allow the host to read and write zero to the MSR. Fixes: 27461da3 ("KVM: x86/pmu: Support full width counting") Suggested-by:
-
Tianjia Zhang authored
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu' structure. For historical reasons, many kvm-related function parameters retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This patch does a unified cleanup of these remaining redundant parameters. Signed-off-by:
Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Reviewed-by:
-
Tianjia Zhang authored
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu' structure. For historical reasons, many kvm-related function parameters retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This patch does a unified cleanup of these remaining redundant parameters. Signed-off-by:
-
Tianjia Zhang authored
In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu' structure. For historical reasons, many kvm-related function parameters retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This patch does a unified cleanup of these remaining redundant parameters. Signed-off-by:
-
Jiaxun Yang authored
This file was created long ago and information inside is obviously outdated. Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20200710063047.154611-4-jiaxun.yang@flygoat.com> Signed-off-by:
-
Jiaxun Yang authored
After tons of fixes to get Trap-and-Emulate build on Loongson64, I've got panic on host machine when trying to run a VM. I found that it can never work on 64bit systems. Revewing the code, it looks like R6 can't supportrd by TE as well. Signed-off-by:
-
- 09 Jul, 2020 12 commits
-
-
Sean Christopherson authored
Move to the common MMU memory cache implementation now that the common code and MIPS's existing code are semantically compatible. No functional change intended. Suggested-by:
Christoffer Dall <christoffer.dall@arm.com> Signed-off-by:
-
Sean Christopherson authored
Use GFP_KERNEL_ACCOUNT instead of GFP_KERNEL when allocating pages for the the GPA page tables. The primary motivation for accounting the allocations is to align with the common KVM memory cache helpers in preparation for moving to the common implementation in a future patch. The actual accounting is a bonus side effect. Signed-off-by:
-
Sean Christopherson authored
Replace the @max param in mmu_topup_memory_cache() and instead use ARRAY_SIZE() to terminate the loop to fill the cache. This removes a BUG_ON() and sets the stage for moving MIPS to the common memory cache implementation. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move to the common MMU memory cache implementation now that the common code and arm64's existing code are semantically compatible. No functional change intended. Cc: Marc Zyngier <maz@kernel.org> Suggested-by:
-
Sean Christopherson authored
Add a "gfp_zero" member to arm64's 'struct kvm_mmu_memory_cache' to make the struct and its usage compatible with the common 'struct kvm_mmu_memory_cache' in linux/kvm_host.h. This will minimize code churn when arm64 moves to the common implementation in a future patch, at the cost of temporarily having somewhat silly code. Note, GFP_PGTABLE_USER is equivalent to GFP_KERNEL_ACCOUNT | GFP_ZERO: #define GFP_PGTABLE_USER (GFP_PGTABLE_KERNEL | __GFP_ACCOUNT) | -> #define GFP_PGTABLE_KERNEL (GFP_KERNEL | __GFP_ZERO) == GFP_KERNEL | __GFP_ACCOUNT | __GFP_ZERO versus #define GFP_KERNEL_ACCOUNT (GFP_KERNEL | __GFP_ACCOUNT) with __GFP_ZERO explicitly OR'd in == GFP_KERNEL | __GFP_ACCOUNT | __GFP_ZERO No functional change intended. Tested-by:Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Sean Christopherson authored
Replace the @max param in mmu_topup_memory_cache() and instead use ARRAY_SIZE() to terminate the loop to fill the cache. This removes a BUG_ON() and sets the stage for moving arm64 to the common memory cache implementation. No functional change intended. Tested-by:
-
Sean Christopherson authored
Move x86's memory cache helpers to common KVM code so that they can be reused by arm64 and MIPS in future patches. Suggested-by:
Ben Gardon <bgardon@google.com> Signed-off-by:
-
Sean Christopherson authored
Move x86's 'struct kvm_mmu_memory_cache' to common code in anticipation of moving the entire x86 implementation code to common KVM and reusing it for arm64 and MIPS. Add a new architecture specific asm/kvm_types.h to control the existence and parameters of the struct. The new header is needed to avoid a chicken-and-egg problem with asm/kvm_host.h as all architectures define instances of the struct in their vCPU structs. Add an asm-generic version of kvm_types.h to avoid having empty files on PPC and s390 in the long term, and for arm64 and mips in the short term. Suggested-by:
-
Sean Christopherson authored
Rename the memory helpers that will soon be moved to common code and be made globaly available via linux/kvm_host.h. "mmu" alone is not a sufficient namespace for globally available KVM symbols. Opportunistically add "nr_" in mmu_memory_cache_free_objects() to make it clear the function returns the number of free objects, as opposed to freeing existing objects. Suggested-by:
-
Sean Christopherson authored
Don't bother filling the gfn array cache when the caller is a fully direct MMU, i.e. won't need a gfn array for shadow pages. Reviewed-by:
-
Sean Christopherson authored
Set __GFP_ZERO for the shadow page memory cache and drop the explicit clear_page() from kvm_mmu_get_page(). This moves the cost of zeroing a page to the allocation time of the physical page, i.e. when topping up the memory caches, and thus avoids having to zero out an entire page while holding mmu_lock. Cc: Peter Feiner <pfeiner@google.com> Cc: Peter Shier <pshier@google.com> Cc: Junaid Shahid <junaids@google.com> Cc: Jim Mattson <jmattson@google.com> Suggested-by:
-
Sean Christopherson authored
Add a gfp_zero flag to 'struct kvm_mmu_memory_cache' and use it to control __GFP_ZERO instead of hardcoding a call to kmem_cache_zalloc(). A future patch needs such a flag for the __get_free_page() path, as gfn arrays do not need/want the allocator to zero the memory. Convert the kmem_cache paths to __GFP_ZERO now so as to avoid a weird and inconsistent API in the future. No functional change intended. Reviewed-by:
-
