Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-11-06 (i40e)

This series contains updates to i40e driver only.

Ivan Vecera resolves a couple issues with devlink; removing a call to
devlink_port_type_clear() and ensuring devlink port is unregistered
after the net device.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Fix devlink port unregistering
  i40e: Do not call devlink_port_type_clear()
====================

Link: https://lore.kernel.org/r/20231107003600.653796-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

W=1 builds now warn if module is built without a MODULE_DESCRIPTION().

Link: https://lore.kernel.org/r/20231108020305.537293-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Add missing netfilter modules description to fix W=1, from Florian Westphal.

2) Fix catch-all element GC with timeout when use with the pipapo set
   backend, this remained broken since I tried to fix it this summer,
   then another attempt to fix it recently.

3) Add missing IPVS modules descriptions to fix W=1, also from Florian.

4) xt_recent allocated a too small buffer to store an IPv4-mapped IPv6
   address which can be parsed by in6_pton(), from Maciej Zenczykowski.
   Broken for many releases.

5) Skip IPv4-mapped IPv6, IPv4-compat IPv6, site/link local scoped IPv6
   addressses to set up IPv6 NAT redirect, also from Florian. This is
   broken since 2012.

* tag 'nf-23-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
  netfilter: xt_recent: fix (increase) ipv6 literal buffer length
  ipvs: add missing module descriptions
  netfilter: nf_tables: remove catchall element in GC sync path
  netfilter: add missing module descriptions
====================

Link: https://lore.kernel.org/r/20231108155802.84617-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2023-11-08

We've added 16 non-merge commits during the last 6 day(s) which contain
a total of 30 files changed, 341 insertions(+), 130 deletions(-).

The main changes are:

1) Fix a BPF verifier issue in precision tracking for BPF_ALU | BPF_TO_BE |
   BPF_END where the source register was incorrectly marked as precise,
   from Shung-Hsi Yu.

2) Fix a concurrency issue in bpf_timer where the former could still have
   been alive after an application releases or unpins the map, from Hou Tao.

3) Fix a BPF verifier issue where immediates are incorrectly cast to u32
   before being spilled and therefore losing sign information, from Hao Sun.

4) Fix a misplaced BPF_TRACE_ITER in check_css_task_iter_allowlist which
   incorrectly compared bpf_prog_type with bpf_attach_type, from Chuyi Zhou.

5) Add __bpf_hook_{start,end} as well as __bpf_kfunc_{start,end}_defs macros,
   migrate all BPF-related __diag callsites over to it, and add a new
   __diag_ignore_all for -Wmissing-declarations to the macros to address
   recent build warnings, from Dave Marchevsky.

6) Fix broken BPF selftest build of xdp_hw_metadata test on architectures
   where char is not signed, from Björn Töpel.

7) Fix test_maps selftest to properly use LIBBPF_OPTS() macro to initialize
   the bpf_map_create_opts, from Andrii Nakryiko.

8) Fix bpffs selftest to avoid unmounting /sys/kernel/debug as it may have
   been mounted and used by other applications already, from Manu Bretelle.

9) Fix a build issue without CONFIG_CGROUPS wrt css_task open-coded
   iterators, from Matthieu Baerts.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
  bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
  selftests/bpf: Fix broken build where char is unsigned
  selftests/bpf: precision tracking test for BPF_NEG and BPF_END
  bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
  selftests/bpf: Add test for using css_task iter in sleepable progs
  selftests/bpf: Add tests for css_task iter combining with cgroup iter
  bpf: Relax allowlist for css_task iter
  selftests/bpf: fix test_maps' use of bpf_map_create_opts
  bpf: Check map->usercnt after timer->timer is assigned
  bpf: Add __bpf_hook_{start,end} macros
  bpf: Add __bpf_kfunc_{start,end}_defs macros
  selftests/bpf: fix test_bpffs
  selftests/bpf: Add test for immediate spilled to stack
  bpf: Fix check_stack_write_fixed_off() to correctly spill imm
  bpf: fix compilation error without CGROUPS
====================

Link: https://lore.kernel.org/r/20231108132448.1970-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Referenced commit doesn't always set iifidx when offloading the flow to
hardware. Fix the following cases:

- nf_conn_act_ct_ext_fill() is called before extension is created with
nf_conn_act_ct_ext_add() in tcf_ct_act(). This can cause rule offload with
unspecified iifidx when connection is offloaded after only single
original-direction packet has been processed by tc data path. Always fill
the new nf_conn_act_ct_ext instance after creating it in
nf_conn_act_ct_ext_add().

- Offloading of unidirectional UDP NEW connections is now supported, but ct
flow iifidx field is not updated when connection is promoted to
bidirectional which can result reply-direction iifidx to be zero when
refreshing the connection. Fill in the extension and update flow iifidx
before calling flow_offload_refresh().

Fixes: 9795ded7 ("net/sched: act_ct: Fill offloading tuple iifidx")
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 6a9bad00 ("net/sched: act_ct: offload UDP NEW connections")
Link: https://lore.kernel.org/r/20231103151410.764271-1-vladbu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The ipv6 redirect target was derived from the ipv4 one, i.e. its
identical to a 'dnat' with the first (primary) address assigned to the
network interface.  The code has been moved around to make it usable
from nf_tables too, but its still the same as it was back when this
was added in 2012.

IPv6, however, has different types of addresses, if the 'wrong' address
comes first the redirection does not work.

In Daniels case, the addresses are:
  inet6 ::ffff:192 ...
  inet6 2a01: ...

... so the function attempts to redirect to the mapped address.

Add more checks before the address is deemed correct:
1. If the packets' daddr is scoped, search for a scoped address too
2. skip tentative addresses
3. skip mapped addresses

Use the first address that appears to match our needs.
Reported-by: Daniel Huhardeaux <tech@tootai.net>
Closes: https://lore.kernel.org/netfilter/71be06b8-6aa0-4cf9-9e0b-e2839b01b22f@tootai.net/
Fixes: 115e23ac ("netfilter: ip6tables: add REDIRECT target")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

in6_pton() supports 'low-32-bit dot-decimal representation'
(this is useful with DNS64/NAT64 networks for example):

  # echo +aaaa:bbbb:cccc:dddd:eeee:ffff:1.2.3.4 > /proc/self/net/xt_recent/DEFAULT
  # cat /proc/self/net/xt_recent/DEFAULT
  src=aaaa:bbbb:cccc:dddd:eeee:ffff:0102:0304 ttl: 0 last_seen: 9733848829 oldest_pkt: 1 9733848829

but the provided buffer is too short:

  # echo +aaaa:bbbb:cccc:dddd:eeee:ffff:255.255.255.255 > /proc/self/net/xt_recent/DEFAULT
  -bash: echo: write error: Invalid argument

Fixes: 079aa88f ("netfilter: xt_recent: IPv6 support")
Signed-off-by: Maciej Żenczykowski <zenczykowski@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

W=1 builds warn on missing MODULE_DESCRIPTION, add them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The expired catchall element is not deactivated and removed from GC sync
path. This path holds mutex so just call nft_setelem_data_deactivate()
and nft_setelem_catchall_remove() before queueing the GC work.

Fixes: 4a9e12ea ("netfilter: nft_set_pipapo: call nft_trans_gc_queue_sync() in catchall GC")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

W=1 builds warn on missing MODULE_DESCRIPTION, add them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

In ppp_generic.c, memdup_user() is utilized to copy a userspace array.
This is done without an overflow-check, which is, however, not critical
because the multiplicands are an unsigned short and struct sock_filter,
which is currently of size 8.

Regardless, string.h now provides memdup_array_user(), a wrapper for
copying userspace arrays in a standardized manner, which has the
advantage of making it more obvious to the reader that an array is being
copied.
The wrapper additionally performs an obligatory overflow check, saving
the reader the effort of analyzing the potential for overflow, and
making the code a bit more robust in case of future changes to the
multiplicands len * size.

Replace memdup_user() with memdup_array_user().
Suggested-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

NETLINK_MAX_FMTMSG_LEN is currently hardcoded to 80, and we provide an
error printf-formatted string having 96 characters including the
terminating \0. Assuming each %d (representing a queue) gets replaced by
a number having at most 2 digits (a reasonable assumption), the final
string is also 96 characters wide, which is too much.

Reduce the verbiage a bit by removing some (partially) redundant words,
which makes the new printf-formatted string be 73 characters wide with
the trailing newline.

Fixes: 800db2d1 ("net: enetc: ensure we always have a minimum number of TXQs for stack")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/lkml/202311061336.4dsWMT1h-lkp@intel.com/Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20231106160311.616118-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

KMSAN reported the following uninit-value access issue:

=====================================================
BUG: KMSAN: uninit-value in virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
 virtio_transport_recv_pkt+0x1dfb/0x26a0 net/vmw_vsock/virtio_transport_common.c:1421
 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
 process_one_work kernel/workqueue.c:2630 [inline]
 process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
 kthread+0x3cc/0x520 kernel/kthread.c:388
 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

Uninit was stored to memory at:
 virtio_transport_space_update net/vmw_vsock/virtio_transport_common.c:1274 [inline]
 virtio_transport_recv_pkt+0x1ee8/0x26a0 net/vmw_vsock/virtio_transport_common.c:1415
 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
 process_one_work kernel/workqueue.c:2630 [inline]
 process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
 kthread+0x3cc/0x520 kernel/kthread.c:388
 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

Uninit was created at:
 slab_post_alloc_hook+0x105/0xad0 mm/slab.h:767
 slab_alloc_node mm/slub.c:3478 [inline]
 kmem_cache_alloc_node+0x5a2/0xaf0 mm/slub.c:3523
 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:559
 __alloc_skb+0x2fd/0x770 net/core/skbuff.c:650
 alloc_skb include/linux/skbuff.h:1286 [inline]
 virtio_vsock_alloc_skb include/linux/virtio_vsock.h:66 [inline]
 virtio_transport_alloc_skb+0x90/0x11e0 net/vmw_vsock/virtio_transport_common.c:58
 virtio_transport_reset_no_sock net/vmw_vsock/virtio_transport_common.c:957 [inline]
 virtio_transport_recv_pkt+0x1279/0x26a0 net/vmw_vsock/virtio_transport_common.c:1387
 vsock_loopback_work+0x3bb/0x5a0 net/vmw_vsock/vsock_loopback.c:120
 process_one_work kernel/workqueue.c:2630 [inline]
 process_scheduled_works+0xff6/0x1e60 kernel/workqueue.c:2703
 worker_thread+0xeca/0x14d0 kernel/workqueue.c:2784
 kthread+0x3cc/0x520 kernel/kthread.c:388
 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304

CPU: 1 PID: 10664 Comm: kworker/1:5 Not tainted 6.6.0-rc3-00146-g9f3ebbef #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc38 04/01/2014
Workqueue: vsock-loopback vsock_loopback_work
=====================================================

The following simple reproducer can cause the issue described above:

int main(void)
{
  int sock;
  struct sockaddr_vm addr = {
    .svm_family = AF_VSOCK,
    .svm_cid = VMADDR_CID_ANY,
    .svm_port = 1234,
  };

  sock = socket(AF_VSOCK, SOCK_STREAM, 0);
  connect(sock, (struct sockaddr *)&addr, sizeof(addr));
  return 0;
}

This issue occurs because the `buf_alloc` and `fwd_cnt` fields of the
`struct virtio_vsock_hdr` are not initialized when a new skb is allocated
in `virtio_transport_init_hdr()`. This patch resolves the issue by
initializing these fields during allocation.

Fixes: 71dc9ec9 ("virtio/vsock: replace virtio_vsock_pkt with sk_buff")
Reported-and-tested-by: syzbot+0c8ce1da0ac31abbadcd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0c8ce1da0ac31abbadcdSigned-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20231104150531.257952-1-syoshida@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

So far we ignore the setting of IFF_MULTICAST. Fix this and clear bit
AcceptMulticast if IFF_MULTICAST isn't set.

Note: Based on the implementations I've seen it doesn't seem to be 100% clear
what a driver is supposed to do if IFF_ALLMULTI is set but IFF_MULTICAST
is not. This patch is based on the understanding that IFF_MULTICAST has
precedence.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/4a57ba02-d52d-4369-9f14-3565e6c1f7dc@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Chuyi Zhou says:

====================
The patchset aims to let the BPF verivier consider
bpf_iter__cgroup->cgroup and bpf_iter__task->task is trusted suggested by
Alexei[1].

Please see individual patches for more details. And comments are always
welcome.

Link[1]:https://lore.kernel.org/bpf/20231022154527.229117-1-zhouchuyi@bytedance.com/T/#mb57725edc8ccdd50a1b165765c7619b4d65ed1b0

v2->v1:
 * Patch #1: Add Yonghong's ack and add description of similar case in
   log.
 * Patch #2: Add Yonghong's ack
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Commit f49843af (selftests/bpf: Add tests for css_task iter combining
with cgroup iter) added a test which demonstrates how css_task iter can be
combined with cgroup iter. That test used bpf_cgroup_from_id() to convert
bpf_iter__cgroup->cgroup to a trusted ptr which is pointless now, since
with the previous fix, we can get a trusted cgroup directly from
bpf_iter__cgroup.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231107132204.912120-3-zhouchuyi@bytedance.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

BTF_TYPE_SAFE_TRUSTED(struct bpf_iter__task) in verifier.c wanted to
teach BPF verifier that bpf_iter__task -> task is a trusted ptr. But it
doesn't work well.

The reason is, bpf_iter__task -> task would go through btf_ctx_access()
which enforces the reg_type of 'task' is ctx_arg_info->reg_type, and in
task_iter.c, we actually explicitly declare that the
ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL.

Actually we have a previous case like this[1] where PTR_TRUSTED is added to
the arg flag for map_iter.

This patch sets ctx_arg_info->reg_type is PTR_TO_BTF_ID_OR_NULL |
PTR_TRUSTED in task_reg_info.

Similarly, bpf_cgroup_reg_info -> cgroup is also PTR_TRUSTED since we are
under the protection of cgroup_mutex and we would check cgroup_is_dead()
in __cgroup_iter_seq_show().

This patch is to improve the user experience of the newly introduced
bpf_iter_css_task kfunc before hitting the mainline. The Fixes tag is
pointing to the commit introduced the bpf_iter_css_task kfunc.

Link[1]:https://lore.kernel.org/all/20230706133932.45883-3-aspsk@isovalent.com/

Fixes: 9c66dc94 ("bpf: Introduce css_task open-coded iterator kfuncs")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231107132204.912120-2-zhouchuyi@bytedance.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

Background: Turris Omnia (Armada 385); eth2 (mvneta) connected to SFP bus;
SFP module is present, but no fiber connected, so definitely no carrier.

After booting, eth2 is down, but netdev LED trigger surprisingly reports
link active. Then, after "ip link set eth2 up", the link indicator goes
away - as I would have expected it from the beginning.

It turns out, that the default carrier state after netdev creation is
"carrier ok". Some ethernet drivers explicitly call netif_carrier_off
during probing, others (like mvneta) don't - which explains the current
behaviour: only when the device is brought up, phylink_start calls
netif_carrier_off.

Fix this for all drivers using phylink, by calling netif_carrier_off in
phylink_create.

Fixes: 089381b2 ("leds: initial support for Turris Omnia LEDs")
Cc: stable@vger.kernel.org
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Filippo Storniolo says:

====================
vsock: fix server prevents clients from reconnecting

This patch series introduce fix and tests for the following vsock bug:
If the same remote peer, using the same port, tries to connect
to a server on a listening port more than once, the server will
reject the connection, causing a "connection reset by peer"
error on the remote peer. This is due to the presence of a
dangling socket from a previous connection in both the connected
and bound socket lists.
The inconsistency of the above lists only occurs when the remote
peer disconnects and the server remains active.
This bug does not occur when the server socket is closed.

More details on the first patch changelog.
The remaining patches are refactoring and test.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This add bind connect test which creates a listening server socket
and tries to connect a client with a bound local port to it twice.
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is a preliminary patch to introduce SOCK_STREAM bind connect test.
vsock_accept() is split into vsock_listen() and vsock_accept().
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add check on socket() return value in vsock_listen()
and vsock_connect()
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the same remote peer, using the same port, tries to connect
to a server on a listening port more than once, the server will
reject the connection, causing a "connection reset by peer"
error on the remote peer. This is due to the presence of a
dangling socket from a previous connection in both the connected
and bound socket lists.
The inconsistency of the above lists only occurs when the remote
peer disconnects and the server remains active.

This bug does not occur when the server socket is closed:
virtio_transport_release() will eventually schedule a call to
virtio_transport_do_close() and the latter will remove the socket
from the bound and connected socket lists and clear the sk_buff.

However, virtio_transport_do_close() will only perform the above
actions if it has been scheduled, and this will not happen
if the server is processing the shutdown message from a remote peer.

To fix this, introduce a call to vsock_remove_sock()
when the server is handling a client disconnect.
This is to remove the socket from the bound and connected socket
lists without clearing the sk_buff.

Fixes: 06a8fc78 ("VSOCK: Introduce virtio_vsock_common.ko")
Reported-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Tested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Co-developed-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Signed-off-by: Filippo Storniolo <f.storniolo95@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Clang warns (or errors with CONFIG_WERROR=y) when CONFIG_TCP_AO is set:

  net/ipv4/tcp_output.c:663:2: error: label at end of compound statement is a C23 extension [-Werror,-Wc23-extensions]
    663 |         }
        |         ^
  1 error generated.

On earlier releases (such as clang-11, the current minimum supported
version for building the kernel) that do not support C23, this was a
hard error unconditionally:

  net/ipv4/tcp_output.c:663:2: error: expected statement
          }
          ^
  1 error generated.

While adding a semicolon after the label would resolve this, it is more
in line with the kernel as a whole to refactor this block into a
standalone function, which means the goto a label construct can just be
replaced with a return statement. Do so to resolve the warning.

Closes: https://github.com/ClangBuiltLinux/linux/issues/1953
Fixes: 1e03d32b ("net/tcp: Add TCP-AO sign to outgoing packets")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TX ring maintained by the tg3 driver can end up in the state, when it
has packets queued for sending but the NIC hardware is not informed, so no
progress is made. This leads to a multi-second interruption in network
traffic followed by dev_watchdog() firing and resetting the queue.

The specific sequence of steps is:

1. tg3_start_xmit() is called at least once and queues packet(s) without
   updating tnapi->prodmbox (netdev_xmit_more() returns true)
2. tg3_start_xmit() is called with an SKB which causes tg3_tso_bug() to be
   called.
3. tg3_tso_bug() determines that the SKB is too large, ...

        if (unlikely(tg3_tx_avail(tnapi) <= frag_cnt_est)) {

   ... stops the queue, and returns NETDEV_TX_BUSY:

        netif_tx_stop_queue(txq);
        ...
        if (tg3_tx_avail(tnapi) <= frag_cnt_est)
                return NETDEV_TX_BUSY;

4. Since all tg3_tso_bug() call sites directly return, the code updating
   tnapi->prodmbox is skipped.

5. The queue is stuck now. tg3_start_xmit() is not called while the queue
   is stopped. The NIC is not processing new packets because
   tnapi->prodmbox wasn't updated. tg3_tx() is not called by
   tg3_poll_work() because the all TX descriptions that could be freed has
   been freed:

        /* run TX completion thread */
        if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) {
                tg3_tx(tnapi);

6. Eventually, dev_watchdog() fires triggering a reset of the queue.

This fix makes sure that the tnapi->prodmbox update happens regardless of
the reason tg3_start_xmit() returned.
Signed-off-by: Alex Pakhunov <alexey.pakhunov@spacex.com>
Signed-off-by: Vincent Wong <vincent.wong2@spacex.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace 'weed' with 'we' in the comment.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_cow_head() can change skb->head (and thus skb_shinfo(skb))

We must not cache skb_shinfo(skb) before skb_cow_head().

Fixes: 6818c4d5 ("idpf: add splitq start_xmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Phani Burra <phani.r.burra@intel.com>
Cc: Sridhar Samudrala <sridhar.samudrala@intel.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Bailey Forrest <bcf@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20231103200451.514047-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Dell R650xs servers hangs on reboot if tg3 driver calls
tg3_power_down.

This happens only if network adapters (BCM5720 for R650xs) were
initialized using SNP (e.g. by booting ipxe.efi).

The actual problem is on Dell side, but this fix allows servers
to come back alive after reboot.
Signed-off-by: George Shuklin <george.shuklin@gmail.com>
Fixes: 2ca1c94c ("tg3: Disable tg3 device on system reboot to avoid triggering AER")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231103115029.83273-1-george.shuklin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Ensure that devlink port is unregistered after unregistering
of net device.

Reproducer:
[root@host ~]# rmmod i40e
[ 4742.939386] i40e 0000:02:00.1: i40e_ptp_stop: removed PHC on enp2s0f1np1
[ 4743.059269] ------------[ cut here ]------------
[ 4743.063900] WARNING: CPU: 21 PID: 10766 at net/devlink/port.c:1078 devl_port_unregister+0x69/0x80
...

Fixes: 9e479d64 ("i40e: Add initial devlink support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Do not call devlink_port_type_clear() prior devlink port unregister
and let devlink core to take care about it.

Reproducer:
[root@host ~]# rmmod i40e
[ 4539.964699] i40e 0000:02:00.0: devlink port type for port 0 cleared without a software interface reference, device type not supported by the kernel?
[ 4540.319811] i40e 0000:02:00.1: devlink port type for port 1 cleared without a software interface reference, device type not supported by the kernel?

Fixes: 9e479d64 ("i40e: Add initial devlink support")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

D. Wythe says

====================
bugfixs for smc

This patches includes bugfix following:

1. hung state
2. sock leak
3. potential panic

We have been testing these patches for some time, but
if you have any questions, please let us know.

--
v1:
Fix spelling errors and incorrect function names in descriptions

v2->v1:
Add fix tags for bugfix patch
====================
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Note that we always hold a reference to sock when attempting
to submit close_work. Therefore, if we have successfully
canceled close_work from pending, we MUST release that reference
to avoid potential leaks.

Fixes: 42bfba9e ("net/smc: immediate termination for SMCD link groups")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch re-fix the issues mentioned by commit 22a825c5
("net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()").

Blocking sending message do solve the issues though, but it also
prevents the peer to receive the final message. Besides, in logic,
whether the sndbuf_desc is NULL or not have no impact on the processing
of cdc message sending.

Hence that, this patch allows the cdc message sending but to check the
sndbuf_desc with care in smc_cdc_tx_handler().

Fixes: 22a825c5 ("net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Considering scenario:

				smc_cdc_rx_handler
__smc_release
				sock_set_flag
smc_close_active()
sock_set_flag

__set_bit(DEAD)			__set_bit(DONE)

Dues to __set_bit is not atomic, the DEAD or DONE might be lost.
if the DEAD flag lost, the state SMC_CLOSED  will be never be reached
in smc_close_passive_work:

if (sock_flag(sk, SOCK_DEAD) &&
	smc_close_sent_any_close(conn)) {
	sk->sk_state = SMC_CLOSED;
} else {
	/* just shutdown, but not yet closed locally */
	sk->sk_state = SMC_APPFINCLOSEWAIT;
}

Replace sock_set_flags or __set_bit to set_bit will fix this problem.
Since set_bit is atomic.

Fixes: b38d7324 ("smc: socket closing and linkgroup cleanup")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 8cea95b0 ("tools: ynl-gen: handle do ops with no input attrs")
added support for some of the previously-skipped ops in nfsd.
Regenerate the user space parsers to fill them in.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When building SYN packet in tcp_syn_options(), MSS, TS, WS, and
SACKPERM are used without checking the remaining bytes in the
options area.

To keep that logic as is, we limit the TCP-AO MAC length in
tcp_ao_parse_crypto().  Currently, the limit is calculated as below.

  MAX_TCP_OPTION_SPACE - TCPOLEN_TSTAMP_ALIGNED
                       - TCPOLEN_WSCALE_ALIGNED
                       - TCPOLEN_SACKPERM_ALIGNED

This looks confusing as (1) we pack SACKPERM into the leading
2-bytes of the aligned 12-bytes of TS and (2) TCPOLEN_MSS_ALIGNED
is not used.  Fortunately, the calculated limit is not wrong as
TCPOLEN_SACKPERM_ALIGNED and TCPOLEN_MSS_ALIGNED are the same value.

However, we should use the proper constant in the formula.

  MAX_TCP_OPTION_SPACE - TCPOLEN_MSS_ALIGNED
                       - TCPOLEN_TSTAMP_ALIGNED
                       - TCPOLEN_WSCALE_ALIGNED

Fixes: 4954f17d ("net/tcp: Introduce TCP_AO setsockopt()s")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On interface down, the pending SQEs in the NIX get dropped
or drained out during SMQ flush. But skb's pointed by these
SQEs never get free or updated to the stack as respective CQE
never get added.
This patch fixes the issue by freeing all valid skb's in SQ SG list.

Fixes: b1bc8457 ("octeontx2-pf: Cleanup all receive buffers in SG descriptor")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Getting the following splat [1] with CONFIG_DEBUG_NET=y and this
reproducer [2]. Problem seems to be that classifiers clear 'struct
tcf_result::drop_reason', thereby triggering the warning in
__kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0).

Fixed by disambiguating a legit error from a verdict with a bogus drop_reason

[1]
WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
Modules linked in:
CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d95 #682
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:kfree_skb_reason+0x38/0x130
[...]
Call Trace:
 <IRQ>
 __netif_receive_skb_core.constprop.0+0x837/0xdb0
 __netif_receive_skb_one_core+0x3c/0x70
 process_backlog+0x95/0x130
 __napi_poll+0x25/0x1b0
 net_rx_action+0x29b/0x310
 __do_softirq+0xc0/0x29b
 do_softirq+0x43/0x60
 </IRQ>

[2]

ip link add name veth0 type veth peer name veth1
ip link set dev veth0 up
ip link set dev veth1 up
tc qdisc add dev veth1 clsact
tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1

Ido reported:

  [...] getting the following splat [1] with CONFIG_DEBUG_NET=y and this
  reproducer [2]. Problem seems to be that classifiers clear 'struct
  tcf_result::drop_reason', thereby triggering the warning in
  __kfree_skb_reason() due to reason being 'SKB_NOT_DROPPED_YET' (0). [...]

  [1]
  WARNING: CPU: 0 PID: 181 at net/core/skbuff.c:1082 kfree_skb_reason+0x38/0x130
  Modules linked in:
  CPU: 0 PID: 181 Comm: mausezahn Not tainted 6.6.0-rc6-custom-ge43e6d95 #682
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
  RIP: 0010:kfree_skb_reason+0x38/0x130
  [...]
  Call Trace:
   <IRQ>
   __netif_receive_skb_core.constprop.0+0x837/0xdb0
   __netif_receive_skb_one_core+0x3c/0x70
   process_backlog+0x95/0x130
   __napi_poll+0x25/0x1b0
   net_rx_action+0x29b/0x310
   __do_softirq+0xc0/0x29b
   do_softirq+0x43/0x60
   </IRQ>

  [2]
  #!/bin/bash

  ip link add name veth0 type veth peer name veth1
  ip link set dev veth0 up
  ip link set dev veth1 up
  tc qdisc add dev veth1 clsact
  tc filter add dev veth1 ingress pref 1 proto all flower dst_mac 00:11:22:33:44:55 action drop
  mausezahn veth0 -a own -b 00:11:22:33:44:55 -q -c 1

What happens is that inside most classifiers the tcf_result is copied over
from a filter template e.g. *res = f->res which then implicitly overrides
the prior SKB_DROP_REASON_TC_{INGRESS,EGRESS} default drop code which was
set via sch_handle_{ingress,egress}() for kfree_skb_reason().

Commit text above copied verbatim from Daniel. The general idea of the patch
is not very different from what Ido originally posted but instead done at the
cls_api codepath.

Fixes: 54a59aed ("net, sched: Make tc-related drop reason more flexible")
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/netdev/ZTjY959R+AFXf3Xy@shredderReviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

W=1 builds now warn if a module is built without
a MODULE_DESCRIPTION(). Fill it in for sock_diag.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot managed to trigger a fault by sending TCP packets
with all flags being set.

v2:
 - While fixing this bug, add PSH flag handling and represent
   flags the way tcpdump does : [S], [S.], [P.]
 - Print 4-tuples more consistently between families.

BUG: KASAN: stack-out-of-bounds in string_nocheck lib/vsprintf.c:645 [inline]
BUG: KASAN: stack-out-of-bounds in string+0x394/0x3d0 lib/vsprintf.c:727
Read of size 1 at addr ffffc9000397f3f5 by task syz-executor299/5039

CPU: 1 PID: 5039 Comm: syz-executor299 Not tainted 6.6.0-rc7-syzkaller-02075-g55c90047 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/09/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x1b0 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc4/0x620 mm/kasan/report.c:475
kasan_report+0xda/0x110 mm/kasan/report.c:588
string_nocheck lib/vsprintf.c:645 [inline]
string+0x394/0x3d0 lib/vsprintf.c:727
vsnprintf+0xc5f/0x1870 lib/vsprintf.c:2818
vprintk_store+0x3a0/0xb80 kernel/printk/printk.c:2191
vprintk_emit+0x14c/0x5f0 kernel/printk/printk.c:2288
vprintk+0x7b/0x90 kernel/printk/printk_safe.c:45
_printk+0xc8/0x100 kernel/printk/printk.c:2332
tcp_inbound_hash.constprop.0+0xdb2/0x10d0 include/net/tcp.h:2760
tcp_v6_rcv+0x2b31/0x34d0 net/ipv6/tcp_ipv6.c:1882
ip6_protocol_deliver_rcu+0x33b/0x13d0 net/ipv6/ip6_input.c:438
ip6_input_finish+0x14f/0x2f0 net/ipv6/ip6_input.c:483
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ip6_input+0xce/0x440 net/ipv6/ip6_input.c:492
dst_input include/net/dst.h:461 [inline]
ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
NF_HOOK include/linux/netfilter.h:308 [inline]
ipv6_rcv+0x563/0x720 net/ipv6/ip6_input.c:310
__netif_receive_skb_one_core+0x115/0x180 net/core/dev.c:5527
__netif_receive_skb+0x1f/0x1b0 net/core/dev.c:5641
netif_receive_skb_internal net/core/dev.c:5727 [inline]
netif_receive_skb+0x133/0x700 net/core/dev.c:5786
tun_rx_batched+0x429/0x780 drivers/net/tun.c:1579
tun_get_user+0x29e7/0x3bc0 drivers/net/tun.c:2002
tun_chr_write_iter+0xe8/0x210 drivers/net/tun.c:2048
call_write_iter include/linux/fs.h:1956 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x650/0xe40 fs/read_write.c:584
ksys_write+0x12f/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: 2717b5ad ("net/tcp: Add tcp_hash_fail() ratelimited logs")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Francesco Ruggeri <fruggeri@arista.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>