- 24 Aug, 2010 12 commits
-
-
Wey-Yi Guy authored
"Thermal Throttling" is an advance feature which only available for newer _agn devices. Move from iwl-core to iwl-agn for better code organization. Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Julia Lawall authored
Error codes are stored in ret, but the return value is always 0. Return ret instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
In each case, error codes are stored in ret, but the return value is always 0. Return ret instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by:
Kalle Valo <kvalo@adurom.com> Signed-off-by:
-
Bob Copeland authored
AR5K_RX_FILTER_PROBEREQ enables reception of probe requests, but the filter flag FIF_BCN_PRBRESP_PROMISC is actually about receiving beacons and probe _responses_, so we shouldn't turn on the filter when scanning. Signed-off-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Bob Copeland authored
Monitor interfaces are never seen by the driver so these cases are never reached. Signed-off-by:
-
Bob Copeland authored
Monitor interfaces are never seen by the driver, so tests based on that opmode don't make sense. Also, we already pass all mic failure packets. Consequently this code is actually accepting any frames with just crypto errors and rejecting those with CRC, FIFO, and PHY errors for all interface types. Adjust the code and comment accordingly. Signed-off-by:
-
Bob Copeland authored
This fixes a few misspellings, word repetitions, and some grammar nits in ath5k comments. No code changes. Signed-off-by:
-
Nick Kossifidis authored
Use the version already supplied in include/linux/ieee80211.h. Signed-off-by:
-
Nick Kossifidis authored
Although the named function also sets the aid, its main purpose is configuring the bssid and we use that everywhere else. Signed-off-by:
-
Johannes Berg authored
Allow userspace to register for more than just action frames by giving the frame subtype, and make it possible to use this in various modes as well. With some tweaks and some added functionality this will, in the future, also be usable in AP mode and be able to replace the cooked monitor interface currently used in that case. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Johannes Berg authored
When MFP is disabled, action frames will not be encrypted since they are management frames and the only management frames that can then be encrypted are authentication frames. Therefore, setting the don't-encrypt flag on action frames is unnecessary. Signed-off-by:
-
Johannes Berg authored
This function analyses only its single, value-passed argument, and has no side effects. Thus it can be const, which makes mac80211 smaller, for example: text data bss dec hex filename 362518 16720 884 380122 5ccda mac80211.ko (before) 362358 16720 884 379962 5cc3a mac80211.ko (after) a 160 byte saving in text size, and an optimisation because the function won't be called as often. Signed-off-by:
-
- 16 Aug, 2010 28 commits
-
-
Andrew Morton authored
i386 allmodconfig: drivers/net/wireless/libertas/cfg.c: In function 'lbs_scan_worker': drivers/net/wireless/libertas/cfg.c:722: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/net/wireless/libertas/cfg.c:722: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cfg.c:722: error: for each function it appears in.) drivers/net/wireless/libertas/cfg.c: In function 'lbs_cfg_connect': drivers/net/wireless/libertas/cfg.c:1267: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function 'signal_pending' drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function 'schedule_timeout' So wait.h has a dependency on sched.h, but doesn't include sched.h. This patch doesn't fix that. Cc: Dan Williams <dcbw@redhat.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Johannes Berg authored
When shared key auth is requested, cfg80211 should verify that the device is capable of WEP crypto which is required. Signed-off-by:
-
Johannes Berg authored
When WEP is unavailable, don't advertise it to cfg80211. Signed-off-by:
-
Johannes Berg authored
The decryption code verifies whether or not a given frame was decrypted and verified by hardware. This is unnecessary, as the crypto RX handler already does it long before the decryption code is even invoked, so remove that code to avoid confusion. Signed-off-by:
-
Johannes Berg authored
There's no need to keep separate if statements for setting up the CCMP/AES-CMAC tfm structs; move that into the existing switch statement. Signed-off-by:
-
Johannes Berg authored
Currently, mac80211 translates the cfg80211 cipher suite selectors into ALG_* values. That isn't all too useful, and some drivers benefit from the distinction between WEP40 and WEP104 as well. Therefore, convert it all to use the cipher suite selectors. Signed-off-by:
Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by:
-
Dan Williams authored
linux-firmware puts libertas firmware in /libertas. Fix the driver to look there first, but fall back to the old firmware names if the new ones don't exist. Add preference for newer firmware versions too. Signed-off-by:
Dan Williams <dcbw@redhat.com> Signed-off-by:
-
Dan Williams authored
linux-firmware puts libertas firmware in /libertas. Fix the driver to look there first, but fall back to the old firmware names if the new ones don't exist. Add preference for newer firmware versions too. Signed-off-by:
-
Dan Williams authored
linux-firmware puts libertas firmware in /libertas. Fix the driver to look there first, but fall back to the old firmware names if the new ones don't exist. Signed-off-by:
-
Dan Williams authored
SDIO, GSPI, and CS all use 2-stage firmware and the loading process and logic should be the same. Allow module parameters to override the automatic firmware choice, otherwise just walk the bus driver's firmware table and pick out the first firmware pair that exists for the given model. Some special care is taken to allow overriding of just the helper or the main firmware, but let the other of the pair be chosen automatically. Signed-off-by:
-
Dan Williams authored
Look for firmware where the linux-firmware tree actually puts it, but fall back to original firmware name & location when the new location doesn't exist. Signed-off-by:
-
Ivo van Doorn authored
rt2x00 was keeping a copy of ieee80211_rx_status embedded into the rt2x00_dev structure. For each RX frame, this structure was copied into the skb->cb where mac80211 would handle it further. However at the moment only the fields current band, and frequency were updated. Whereas the band was already provided directly within the rt2x00_dev structure. Save a memcpy action, and reduce memory a bit, by adding a curr_freq field to rt2x00_dev, and completely remove the ieee80211_rx_status structure from rt2x00_dev. Signed-off-by:
Ivo van Doorn <IvDoorn@gmail.com> Acked-by:
-
Helmut Schaa authored
Add some comments about the TXWI fields and the TX_STA_FIFO register. Especially describe the relationship between the TXWI field PACKETID and the PID field in the TX_STA_FIFO register. Signed-off-by:
Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by:
-
Ivo van Doorn authored
The TX_STA_FIFO register which is used for per-frame TX frame status reporting is also valid on rt2800usb. We can move the rt2800pci_txdone function into rt2800lib where it can also be used by rt2800usb. rt2800usb needs to overwrite the txdone work handler to a different function. Both rt2800usb as rt2800_txdone need to take into account that IO failures can occur while uploading the URB, which means that when obtaining the new entry the IO status must be checked. Signed-off-by:
-
Ivo van Doorn authored
The only reason why the write_tx_data callback function is needed inside the driver, is because the location of the TXWI descriptor is different on PCI and USB hardware. Except for the beacon, where the TXWI is always at the start of the SKB buffer. In both cases the drivers write_tx_data function only wrap around the function rt2800_write_txwi. Move write_tx_data completely into the rt2800lib library, and add a callback function to obtain the TXWI pointer. Signed-off-by:
-
Ivo van Doorn authored
At some points, some drivers can't report the full TX status information. This can happen for the UNKNOWN state, or the FAILURE state (in case the URB failed). Add a wrapper function to simplify reporting the empty TX information. Signed-off-by:
-
Ivo van Doorn authored
Signed-off-by:
-
Ivo van Doorn authored
Move all TX and RX completion handling into a work structure, which is handeled on the mac80211 workqueue. This simplifies the code in rt2x00lib since it no longer needs to check if the device is USB or PCI to decide which mac80211 function should be used. In the watchdog some changes are needed since it can no longer rely on the TX completion function to be run while looping through the entries. (Both functions now work on the same workqueue, so this would deadlock). So the watchdog now waits for the URB to return, and handle the TX status report directly. As a side-effect, the debugfs entry for the RX queue now correctly displays the positions of the INDEX and INDEX_DONE counters. This also implies that it is not possible to perform checks like queue_empty() and queue_full() on the RX queue. Signed-off-by:
-
Luis R. Rodriguez authored
Use ath9k_cmn_get_hw_crypto_keytype() instead which is already exported and shared, and does exactly the same thing. Reported-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by:
-
Julia Lawall authored
Outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by:
-
Julia Lawall authored
Indent the branch of an if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by:
-
Julia Lawall authored
At the point of the patched code, err has already been tested, so it is only worthwhile to test it again in the if branches where it is changed. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by:
-
Johannes Berg authored
Enable using network namespaces with wireless devices even when sysfs is enabled using the same infrastructure that was built for netdevs. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Johannes Berg authored
Sometimes drivers have more information than the stack about how their antennas/chains are used, and may require that the SM PS mode be changed. This could happen, for example, when detecting that the user disconnected an antenna. Thus this patch introduces API to allow drivers to request SM PS mode changes. Signed-off-by:
-
Johannes Berg authored
Sometimes we don't just need to know whether or not the device is idle, but also per interface. This adds that reporting capability to mac80211. Signed-off-by:
-
Andrea Gelmini authored
"userpace" -> "userspace" Signed-off-by:
Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by:
-
Johannes Berg authored
When an AP sends a deauth frame, or we send one to an AP, that only means we lost our connection if we were actually connected to that AP. Check this to avoid sending spurious "disconnected" events and breaking "iw ... link" reporting. Signed-off-by:
-
Christian Lamparter authored
This patch introduces a new timer, which will release queued-up MPDUs from the reorder buffer, whenever they've waited for more than HT_RX_REORDER_BUF_TIMEOUT (which is at around 100 ms). The advantage of having a dedicated timer, instead of relying on a constant stream of freshly arriving aMPDUs to release the old ones, is particularly observable when even a small fraction of MPDUs are forever lost at low network speeds. Previously under these circumstances frames would become stuck in the reorder buffer and the network stack of both HT peers throttled back, instead of revving up and gunning the pipes. Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
