1. 02 Jan, 2014 1 commit
  2. 22 Dec, 2013 6 commits
    • Tom Zanussi's avatar
      tracing: Add documentation for trace event triggers · ac38fb85
      Tom Zanussi authored
      Provide a basic overview of trace event triggers and document the
      available trigger commands, along with a few simple examples.
      
      Link: http://lkml.kernel.org/r/2595dd9196d7b553049611f2a3f849ca75d650a2.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: default avatarTom Zanussi <tom.zanussi@linux.intel.com>
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      ac38fb85
    • Tom Zanussi's avatar
      tracing: Add and use generic set_trigger_filter() implementation · bac5fb97
      Tom Zanussi authored
      Add a generic event_command.set_trigger_filter() op implementation and
      have the current set of trigger commands use it - this essentially
      gives them all support for filters.
      
      Syntactically, filters are supported by adding 'if <filter>' just
      after the command, in which case only events matching the filter will
      invoke the trigger.  For example, to add a filter to an
      enable/disable_event command:
      
          echo 'enable_event:system:event if common_pid == 999' > \
                    .../othersys/otherevent/trigger
      
      The above command will only enable the system:event event if the
      common_pid field in the othersys:otherevent event is 999.
      
      As another example, to add a filter to a stacktrace command:
      
          echo 'stacktrace if common_pid == 999' > \
                         .../somesys/someevent/trigger
      
      The above command will only trigger a stacktrace if the common_pid
      field in the event is 999.
      
      The filter syntax is the same as that described in the 'Event
      filtering' section of Documentation/trace/events.txt.
      
      Because triggers can now use filters, the trigger-invoking logic needs
      to be moved in those cases - e.g. for ftrace_raw_event_calls, if a
      trigger has a filter associated with it, the trigger invocation now
      needs to happen after the { assign; } part of the call, in order for
      the trigger condition to be tested.
      
      There's still a SOFT_DISABLED-only check at the top of e.g. the
      ftrace_raw_events function, so when an event is soft disabled but not
      because of the presence of a trigger, the original SOFT_DISABLED
      behavior remains unchanged.
      
      There's also a bit of trickiness in that some triggers need to avoid
      being invoked while an event is currently in the process of being
      logged, since the trigger may itself log data into the trace buffer.
      Thus we make sure the current event is committed before invoking those
      triggers.  To do that, we split the trigger invocation in two - the
      first part (event_triggers_call()) checks the filter using the current
      trace record; if a command has the post_trigger flag set, it sets a
      bit for itself in the return value, otherwise it directly invoks the
      trigger.  Once all commands have been either invoked or set their
      return flag, event_triggers_call() returns.  The current record is
      then either committed or discarded; if any commands have deferred
      their triggers, those commands are finally invoked following the close
      of the current event by event_triggers_post_call().
      
      To simplify the above and make it more efficient, the TRIGGER_COND bit
      is introduced, which is set only if a soft-disabled trigger needs to
      use the log record for filter testing or needs to wait until the
      current log record is closed.
      
      The syscall event invocation code is also changed in analogous ways.
      
      Because event triggers need to be able to create and free filters,
      this also adds a couple external wrappers for the existing
      create_filter and free_filter functions, which are too generic to be
      made extern functions themselves.
      
      Link: http://lkml.kernel.org/r/7164930759d8719ef460357f143d995406e4eead.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: default avatarTom Zanussi <tom.zanussi@linux.intel.com>
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      bac5fb97
    • Steven Rostedt (Red Hat)'s avatar
      tracing: Move ftrace_event_file() out of DYNAMIC_FTRACE ifdef · 2875a08b
      Steven Rostedt (Red Hat) authored
      Now that event triggers use ftrace_event_file(), it needs to be outside
      the #ifdef CONFIG_DYNAMIC_FTRACE, as it can now be used when that is
      not defined.
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      2875a08b
    • Tom Zanussi's avatar
      tracing: Add 'enable_event' and 'disable_event' event trigger commands · 7862ad18
      Tom Zanussi authored
      Add 'enable_event' and 'disable_event' event_command commands.
      
      enable_event and disable_event event triggers are added by the user
      via these commands in a similar way and using practically the same
      syntax as the analagous 'enable_event' and 'disable_event' ftrace
      function commands, but instead of writing to the set_ftrace_filter
      file, the enable_event and disable_event triggers are written to the
      per-event 'trigger' files:
      
          echo 'enable_event:system:event' > .../othersys/otherevent/trigger
          echo 'disable_event:system:event' > .../othersys/otherevent/trigger
      
      The above commands will enable or disable the 'system:event' trace
      events whenever the othersys:otherevent events are hit.
      
      This also adds a 'count' version that limits the number of times the
      command will be invoked:
      
          echo 'enable_event:system:event:N' > .../othersys/otherevent/trigger
          echo 'disable_event:system:event:N' > .../othersys/otherevent/trigger
      
      Where N is the number of times the command will be invoked.
      
      The above commands will will enable or disable the 'system:event'
      trace events whenever the othersys:otherevent events are hit, but only
      N times.
      
      This also makes the find_event_file() helper function extern, since
      it's useful to use from other places, such as the event triggers code,
      so make it accessible.
      
      Link: http://lkml.kernel.org/r/f825f3048c3f6b026ee37ae5825f9fc373451828.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: default avatarTom Zanussi <tom.zanussi@linux.intel.com>
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      7862ad18
    • Tom Zanussi's avatar
      tracing: Add 'stacktrace' event trigger command · f21ecbb3
      Tom Zanussi authored
      Add 'stacktrace' event_command.  stacktrace event triggers are added
      by the user via this command in a similar way and using practically
      the same syntax as the analogous 'stacktrace' ftrace function command,
      but instead of writing to the set_ftrace_filter file, the stacktrace
      event trigger is written to the per-event 'trigger' files:
      
          echo 'stacktrace' > .../tracing/events/somesys/someevent/trigger
      
      The above command will turn on stacktraces for someevent i.e. whenever
      someevent is hit, a stacktrace will be logged.
      
      This also adds a 'count' version that limits the number of times the
      command will be invoked:
      
          echo 'stacktrace:N' > .../tracing/events/somesys/someevent/trigger
      
      Where N is the number of times the command will be invoked.
      
      The above command will log N stacktraces for someevent i.e. whenever
      someevent is hit N times, a stacktrace will be logged.
      
      Link: http://lkml.kernel.org/r/0c30c008a0828c660aa0e1bbd3255cf179ed5c30.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: default avatarTom Zanussi <tom.zanussi@linux.intel.com>
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      f21ecbb3
    • Tom Zanussi's avatar
      tracing: Add 'snapshot' event trigger command · 93e31ffb
      Tom Zanussi authored
      Add 'snapshot' event_command.  snapshot event triggers are added by
      the user via this command in a similar way and using practically the
      same syntax as the analogous 'snapshot' ftrace function command, but
      instead of writing to the set_ftrace_filter file, the snapshot event
      trigger is written to the per-event 'trigger' files:
      
          echo 'snapshot' > .../somesys/someevent/trigger
      
      The above command will turn on snapshots for someevent i.e. whenever
      someevent is hit, a snapshot will be done.
      
      This also adds a 'count' version that limits the number of times the
      command will be invoked:
      
          echo 'snapshot:N' > .../somesys/someevent/trigger
      
      Where N is the number of times the command will be invoked.
      
      The above command will snapshot N times for someevent i.e. whenever
      someevent is hit N times, a snapshot will be done.
      
      Also adds a new tracing_alloc_snapshot() function - the existing
      tracing_snapshot_alloc() function is a special version of
      tracing_snapshot() that also does the snapshot allocation - the
      snapshot triggers would like to be able to do just the allocation but
      not take a snapshot; the existing tracing_snapshot_alloc() in turn now
      also calls tracing_alloc_snapshot() underneath to do that allocation.
      
      Link: http://lkml.kernel.org/r/c9524dd07ce01f9dcbd59011290e0a8d5b47d7ad.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: default avatarTom Zanussi <tom.zanussi@linux.intel.com>
      [ fix up from kbuild test robot <fengguang.wu@intel.com report ]
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      93e31ffb
  3. 20 Dec, 2013 2 commits
    • Tom Zanussi's avatar
      tracing: Add 'traceon' and 'traceoff' event trigger commands · 2a2df321
      Tom Zanussi authored
      Add 'traceon' and 'traceoff' event_command commands.  traceon and
      traceoff event triggers are added by the user via these commands in a
      similar way and using practically the same syntax as the analagous
      'traceon' and 'traceoff' ftrace function commands, but instead of
      writing to the set_ftrace_filter file, the traceon and traceoff
      triggers are written to the per-event 'trigger' files:
      
          echo 'traceon' > .../tracing/events/somesys/someevent/trigger
          echo 'traceoff' > .../tracing/events/somesys/someevent/trigger
      
      The above command will turn tracing on or off whenever someevent is
      hit.
      
      This also adds a 'count' version that limits the number of times the
      command will be invoked:
      
          echo 'traceon:N' > .../tracing/events/somesys/someevent/trigger
          echo 'traceoff:N' > .../tracing/events/somesys/someevent/trigger
      
      Where N is the number of times the command will be invoked.
      
      The above commands will will turn tracing on or off whenever someevent
      is hit, but only N times.
      
      Some common register/unregister_trigger() implementations of the
      event_command reg()/unreg() callbacks are also provided, which add and
      remove trigger instances to the per-event list of triggers, and
      arm/disarm them as appropriate.  event_trigger_callback() is a
      general-purpose event_command func() implementation that orchestrates
      command parsing and registration for most normal commands.
      
      Most event commands will use these, but some will override and
      possibly reuse them.
      
      The event_trigger_init(), event_trigger_free(), and
      event_trigger_print() functions are meant to be common implementations
      of the event_trigger_ops init(), free(), and print() ops,
      respectively.
      
      Most trigger_ops implementations will use these, but some will
      override and possibly reuse them.
      
      Link: http://lkml.kernel.org/r/00a52816703b98d2072947478dd6e2d70cde5197.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: default avatarTom Zanussi <tom.zanussi@linux.intel.com>
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      2a2df321
    • Tom Zanussi's avatar
      tracing: Add basic event trigger framework · 85f2b082
      Tom Zanussi authored
      Add a 'trigger' file for each trace event, enabling 'trace event
      triggers' to be set for trace events.
      
      'trace event triggers' are patterned after the existing 'ftrace
      function triggers' implementation except that triggers are written to
      per-event 'trigger' files instead of to a single file such as the
      'set_ftrace_filter' used for ftrace function triggers.
      
      The implementation is meant to be entirely separate from ftrace
      function triggers, in order to keep the respective implementations
      relatively simple and to allow them to diverge.
      
      The event trigger functionality is built on top of SOFT_DISABLE
      functionality.  It adds a TRIGGER_MODE bit to the ftrace_event_file
      flags which is checked when any trace event fires.  Triggers set for a
      particular event need to be checked regardless of whether that event
      is actually enabled or not - getting an event to fire even if it's not
      enabled is what's already implemented by SOFT_DISABLE mode, so trigger
      mode directly reuses that.  Event trigger essentially inherit the soft
      disable logic in __ftrace_event_enable_disable() while adding a bit of
      logic and trigger reference counting via tm_ref on top of that in a
      new trace_event_trigger_enable_disable() function.  Because the base
      __ftrace_event_enable_disable() code now needs to be invoked from
      outside trace_events.c, a wrapper is also added for those usages.
      
      The triggers for an event are actually invoked via a new function,
      event_triggers_call(), and code is also added to invoke them for
      ftrace_raw_event calls as well as syscall events.
      
      The main part of the patch creates a new trace_events_trigger.c file
      to contain the trace event triggers implementation.
      
      The standard open, read, and release file operations are implemented
      here.
      
      The open() implementation sets up for the various open modes of the
      'trigger' file.  It creates and attaches the trigger iterator and sets
      up the command parser.  If opened for reading set up the trigger
      seq_ops.
      
      The read() implementation parses the event trigger written to the
      'trigger' file, looks up the trigger command, and passes it along to
      that event_command's func() implementation for command-specific
      processing.
      
      The release() implementation does whatever cleanup is needed to
      release the 'trigger' file, like releasing the parser and trigger
      iterator, etc.
      
      A couple of functions for event command registration and
      unregistration are added, along with a list to add them to and a mutex
      to protect them, as well as an (initially empty) registration function
      to add the set of commands that will be added by future commits, and
      call to it from the trace event initialization code.
      
      also added are a couple trigger-specific data structures needed for
      these implementations such as a trigger iterator and a struct for
      trigger-specific data.
      
      A couple structs consisting mostly of function meant to be implemented
      in command-specific ways, event_command and event_trigger_ops, are
      used by the generic event trigger command implementations.  They're
      being put into trace.h alongside the other trace_event data structures
      and functions, in the expectation that they'll be needed in several
      trace_event-related files such as trace_events_trigger.c and
      trace_events.c.
      
      The event_command.func() function is meant to be called by the trigger
      parsing code in order to add a trigger instance to the corresponding
      event.  It essentially coordinates adding a live trigger instance to
      the event, and arming the triggering the event.
      
      Every event_command func() implementation essentially does the
      same thing for any command:
      
         - choose ops - use the value of param to choose either a number or
           count version of event_trigger_ops specific to the command
         - do the register or unregister of those ops
         - associate a filter, if specified, with the triggering event
      
      The reg() and unreg() ops allow command-specific implementations for
      event_trigger_op registration and unregistration, and the
      get_trigger_ops() op allows command-specific event_trigger_ops
      selection to be parameterized.  When a trigger instance is added, the
      reg() op essentially adds that trigger to the triggering event and
      arms it, while unreg() does the opposite.  The set_filter() function
      is used to associate a filter with the trigger - if the command
      doesn't specify a set_filter() implementation, the command will ignore
      filters.
      
      Each command has an associated trigger_type, which serves double duty,
      both as a unique identifier for the command as well as a value that
      can be used for setting a trigger mode bit during trigger invocation.
      
      The signature of func() adds a pointer to the event_command struct,
      used to invoke those functions, along with a command_data param that
      can be passed to the reg/unreg functions.  This allows func()
      implementations to use command-specific blobs and supports code
      re-use.
      
      The event_trigger_ops.func() command corrsponds to the trigger 'probe'
      function that gets called when the triggering event is actually
      invoked.  The other functions are used to list the trigger when
      needed, along with a couple mundane book-keeping functions.
      
      This also moves event_file_data() into trace.h so it can be used
      outside of trace_events.c.
      
      Link: http://lkml.kernel.org/r/316d95061accdee070aac8e5750afba0192fa5b9.1382622043.git.tom.zanussi@linux.intel.comSigned-off-by: default avatarTom Zanussi <tom.zanussi@linux.intel.com>
      Idea-by: default avatarSteve Rostedt <rostedt@goodmis.org>
      Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      85f2b082
  4. 15 Dec, 2013 10 commits
    • Linus Torvalds's avatar
      Linux 3.13-rc4 · 319e2e3f
      Linus Torvalds authored
      319e2e3f
    • Matias Bjorling's avatar
      null_blk: mem garbage on NUMA systems during init · 57053d8c
      Matias Bjorling authored
      For NUMA systems, initializing the blk-mq layer and using per node hctx.
      We initialize submit queues to 1, while blk-mq nr_hw_queues is
      initialized to the number of NUMA nodes.
      
      This makes the null_init_hctx function overwrite memory outside of what
      it allocated.  In my case it lead to writing garbage into struct
      request_queue's mq_map.
      Signed-off-by: default avatarMatias Bjorling <m@bjorling.me>
      Cc: Jens Axboe <axboe@kernel.dk>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      57053d8c
    • Sergey Senozhatsky's avatar
      radeon_pm: fix oops in hwmon_attributes_visible() and radeon_hwmon_show_temp_thresh() · e4158f1b
      Sergey Senozhatsky authored
      Since commit ec39f64b ("drm/radeon/dpm: Convert to use
      devm_hwmon_register_with_groups") radeon_hwmon_init() is using
      hwmon_device_register_with_groups(), which sets `rdev' as a device
      private driver_data, while hwmon_attributes_visible() and
      radeon_hwmon_show_temp_thresh() are still waiting for `drm_device'.
      
      Fix them by using dev_get_drvdata(), in order to avoid this oops:
      
        BUG: unable to handle kernel paging request at 0000000000001e28
        IP: [<ffffffffa02ae8b4>] hwmon_attributes_visible+0x18/0x3d [radeon]
        PGD 15057e067 PUD 151a8e067 PMD 0
        Oops: 0000 [#1] PREEMPT SMP
        Call Trace:
          internal_create_group+0x114/0x1d9
          sysfs_create_group+0xe/0x10
          sysfs_create_groups+0x22/0x5f
          device_add+0x34f/0x501
          device_register+0x15/0x18
          hwmon_device_register_with_groups+0xb5/0xed
          radeon_hwmon_init+0x56/0x7c [radeon]
          radeon_pm_init+0x134/0x7e5 [radeon]
          radeon_modeset_init+0x75f/0x8ed [radeon]
          radeon_driver_load_kms+0xc6/0x187 [radeon]
          drm_dev_register+0xf9/0x1b4 [drm]
          drm_get_pci_dev+0x98/0x129 [drm]
          radeon_pci_probe+0xa3/0xac [radeon]
          pci_device_probe+0x6e/0xcf
          driver_probe_device+0x98/0x1c4
          __driver_attach+0x5c/0x7e
          bus_for_each_dev+0x7b/0x85
          driver_attach+0x19/0x1b
          bus_add_driver+0x104/0x1ce
          driver_register+0x89/0xc5
          __pci_register_driver+0x58/0x5b
          drm_pci_init+0x86/0xea [drm]
          radeon_init+0x97/0x1000 [radeon]
          do_one_initcall+0x7f/0x117
          load_module+0x1583/0x1bb4
          SyS_init_module+0xa0/0xaf
      Signed-off-by: default avatarSergey Senozhatsky <sergey.senozhatsky@gmail.com>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Alexander Deucher <Alexander.Deucher@amd.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e4158f1b
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4a251dd2
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Revert CHECKSUM_COMPLETE optimization in pskb_trim_rcsum(), I can't
          figure out why it breaks things.
      
       2) Fix comparison in netfilter ipset's hash_netnet4_data_equal(), it
          was basically doing "x == x", from Dave Jones.
      
       3) Freescale FEC driver was DMA mapping the wrong number of bytes, from
          Sebastian Siewior.
      
       4) Blackhole and prohibit routes in ipv6 were not doing the right thing
          because their ->input and ->output methods were not being assigned
          correctly.  Now they behave properly like their ipv4 counterparts.
          From Kamala R.
      
       5) Several drivers advertise the NETIF_F_FRAGLIST capability, but
          really do not support this feature and will send garbage packets if
          fed fraglist SKBs.  From Eric Dumazet.
      
       6) Fix long standing user triggerable BUG_ON over loopback in RDS
          protocol stack, from Venkat Venkatsubra.
      
       7) Several not so common code paths can potentially try to invoke
          packet scheduler actions that might be NULL without checking.  Shore
          things up by either 1) defining a method as mandatory and erroring
          on registration if that method is NULL 2) defininig a method as
          optional and the registration function hooks up a default
          implementation when NULL is seen.  From Jamal Hadi Salim.
      
       8) Fix fragment detection in xen-natback driver, from Paul Durrant.
      
       9) Kill dangling enter_memory_pressure method in cg_proto ops, from
          Eric W Biederman.
      
      10) SKBs that traverse namespaces should have their local_df cleared,
          from Hannes Frederic Sowa.
      
      11) IOCB file position is not being updated by macvtap_aio_read() and
          tun_chr_aio_read().  From Zhi Yong Wu.
      
      12) Don't free virtio_net netdev before releasing all of the NAPI
          instances.  From Andrey Vagin.
      
      13) Procfs entry leak in xt_hashlimit, from Sergey Popovich.
      
      14) IPv6 routes that are no cached routes should not count against the
          garbage collection limits.  We had this almost right, but were
          missing handling addrconf generated routes properly.  From Hannes
          Frederic Sowa.
      
      15) fib{4,6}_rule_suppress() have to consider potentially seeing NULL
          route info when they are called, from Stefan Tomanek.
      
      16) TUN and MACVTAP have had truncated packet signalling for some time,
          fix from Jason Wang.
      
      17) Fix use after frrr in __udp4_lib_rcv(), from Eric Dumazet.
      
      18) xen-netback does not interpret the NAPI budget properly for TX work,
          fix from Paul Durrant.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (132 commits)
        igb: Fix for issue where values could be too high for udelay function.
        i40e: fix null dereference
        xen-netback: fix gso_prefix check
        net: make neigh_priv_len in struct net_device 16bit instead of 8bit
        drivers: net: cpsw: fix for cpsw crash when build as modules
        xen-netback: napi: don't prematurely request a tx event
        xen-netback: napi: fix abuse of budget
        sch_tbf: use do_div() for 64-bit divide
        udp: ipv4: must add synchronization in udp_sk_rx_dst_set()
        net:fec: remove duplicate lines in comment about errata ERR006358
        Revert "8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature"
        8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature
        xen-netback: make sure skb linear area covers checksum field
        net: smc91x: Fix device tree based configuration so it's usable
        udp: ipv4: fix potential use after free in udp_v4_early_demux()
        macvtap: signal truncated packets
        tun: unbreak truncated packet signalling
        net: sched: htb: fix the calculation of quantum
        net: sched: tbf: fix the calculation of max_size
        micrel: add support for KSZ8041RNLI
        ...
      4a251dd2
    • Linus Torvalds's avatar
      Merge branch 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 908bfda7
      Linus Torvalds authored
      Pull x86 fixes from Peter Anvin:
       "This is a pretty small batch:
      
        The biggest single change is to stop using EFI time services on 32-bit
        platforms.  This matches our current behavior on 64-bit platforms as
        we already had ruled them out there as being too unreliable.  Turns
        out that affects 32-bit platforms, too.
      
        One NULL pointer fix for SGI UV.
      
        Two minor build fixes, one of which only affects icc and the other
        which affects icc and future versions or nonstandard default settings
        of gcc"
      
      * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        x86, efi: Don't use (U)EFI time services on 32 bit
        x86, build, icc: Remove uninitialized_var() from compiler-intel.h
        x86/UV: Fix NULL pointer dereference in uv_flush_tlb_others() if the 'nobau' boot option is used
        x86, build: Pass in additional -mno-mmx, -mno-sse options
      908bfda7
    • Linus Torvalds's avatar
      Merge tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci · 9199c4ca
      Linus Torvalds authored
      Pull PCI updates from Bjorn Helgaas:
       "PCI device hotplug
          - Move device_del() from pci_stop_dev() to pci_destroy_dev() (Rafael
            Wysocki)
      
        Host bridge drivers
          - Update maintainers for DesignWare, i.MX6, Armada, R-Car (Bjorn
            Helgaas)
          - mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
            (Jason Gunthorpe)
      
        Miscellaneous
          - Avoid unnecessary CPU switch when calling .probe() (Alexander
            Duyck)
          - Revert "workqueue: allow work_on_cpu() to be called recursively"
            (Bjorn Helgaas)
          - Disable Bus Master only on kexec reboot (Khalid Aziz)
          - Omit PCI ID macro strings to shorten quirk names for LTO (Michal
            Marek)"
      
      * tag 'pci-v3.13-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
        MAINTAINERS: Add DesignWare, i.MX6, Armada, R-Car PCI host maintainers
        PCI: Disable Bus Master only on kexec reboot
        PCI: mvebu: Return 'unsupported' for Interrupt Line and Interrupt Pin
        PCI: Omit PCI ID macro strings to shorten quirk names
        PCI: Move device_del() from pci_stop_dev() to pci_destroy_dev()
        Revert "workqueue: allow work_on_cpu() to be called recursively"
        PCI: Avoid unnecessary CPU switch when calling driver .probe() method
      9199c4ca
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security · b5745c59
      Linus Torvalds authored
      Pull SELinux fixes from James Morris.
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
        selinux: process labeled IPsec TCP SYN-ACK packets properly in selinux_ip_postroute()
        selinux: look for IPsec labels on both inbound and outbound packets
        selinux: handle TCP SYN-ACK packets correctly in selinux_ip_postroute()
        selinux: handle TCP SYN-ACK packets correctly in selinux_ip_output()
        selinux: fix possible memory leak
      b5745c59
    • Linus Torvalds's avatar
      Revert "selinux: consider filesystem subtype in policies" · 29b1deb2
      Linus Torvalds authored
      This reverts commit 102aefdd.
      
      Tom London reports that it causes sync() to hang on Fedora rawhide:
      
        https://bugzilla.redhat.com/show_bug.cgi?id=1033965
      
      and Josh Boyer bisected it down to this commit.  Reverting the commit in
      the rawhide kernel fixes the problem.
      
      Eric Paris root-caused it to incorrect subtype matching in that commit
      breaking fuse, and has a tentative patch, but by now we're better off
      retrying this in 3.14 rather than playing with it any more.
      Reported-by: default avatarTom London <selinux@gmail.com>
      Bisected-by: default avatarJosh Boyer <jwboyer@fedoraproject.org>
      Acked-by: default avatarEric Paris <eparis@redhat.com>
      Cc: James Morris <jmorris@namei.org>
      Cc: Anand Avati <avati@redhat.com>
      Cc: Paul Moore <paul@paul-moore.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      29b1deb2
    • Carolyn Wyborny's avatar
      igb: Fix for issue where values could be too high for udelay function. · df29df92
      Carolyn Wyborny authored
      This patch changes the igb_phy_has_link function to check the value of the
      parameter before deciding to use udelay or mdelay in order to be sure that
      the value is not too high for udelay function.
      
      CC: stable kernel <stable@vger.kernel.org> # 3.9+
      Signed-off-by: default avatarSunil K Pandey <sunil.k.pandey@intel.com>
      Signed-off-by: default avatarKevin B Smith <kevin.b.smith@intel.com>
      Signed-off-by: default avatarCarolyn Wyborny <carolyn.wyborny@intel.com>
      Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      df29df92
    • Jesse Brandeburg's avatar
      i40e: fix null dereference · 3c325ced
      Jesse Brandeburg authored
      If the vsi->tx_rings structure is NULL we don't want to panic.
      
      Change-Id: Ic694f043701738c434e8ebe0caf0673f4410dc10
      Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
      Tested-by: default avatarKavindya Deegala <kavindya.s.deegala@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3c325ced
  5. 14 Dec, 2013 3 commits
  6. 13 Dec, 2013 18 commits
    • Linus Torvalds's avatar
      Merge tag 'dm-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm · 93e1585e
      Linus Torvalds authored
      Pull device mapper fixes from Mike Snitzer:
       "A set of device-mapper fixes for 3.13.
      
        A fix for possible memory corruption during DM table load, fix a
        possible leak of snapshot space in case of a crash, fix a possible
        deadlock due to a shared workqueue in the delay target, fix to
        initialize read-only module parameters that are used to export metrics
        for dm stats and dm bufio.
      
        Quite a few stable fixes were identified for both the thin-
        provisioning and caching targets as a result of increased regression
        testing using the device-mapper-test-suite (dmts).  The most notable
        of these are the reference counting fixes for the space map btree that
        is used by the dm-array interface -- without these the dm-cache
        metadata will leak, resulting in dm-cache devices running out of
        metadata blocks.  Also, some important fixes related to the
        thin-provisioning target's transition to read-only mode on error"
      
      * tag 'dm-3.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
        dm array: fix a reference counting bug in shadow_ablock
        dm space map: disallow decrementing a reference count below zero
        dm stats: initialize read-only module parameter
        dm bufio: initialize read-only module parameters
        dm cache: actually resize cache
        dm cache: update Documentation for invalidate_cblocks's range syntax
        dm cache policy mq: fix promotions to occur as expected
        dm thin: allow pool in read-only mode to transition to read-write mode
        dm thin: re-establish read-only state when switching to fail mode
        dm thin: always fallback the pool mode if commit fails
        dm thin: switch to read-only mode if metadata space is exhausted
        dm thin: switch to read only mode if a mapping insert fails
        dm space map metadata: return on failure in sm_metadata_new_block
        dm table: fail dm_table_create on dm_round_up overflow
        dm snapshot: avoid snapshot space leak on crash
        dm delay: fix a possible deadlock due to shared workqueue
      93e1585e
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid · 1008ebb6
      Linus Torvalds authored
      Pull HID fixes from Jiri Kosina:
      
       - Genius Gx Imperator Keyboard regression fix (missing break in case),
         by Ben Hutchings
      
       - duplicate sysfs entry error fix for hid-sensor-hub driver, by
         Srinivas Pandruvada
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
        HID: hid-sensor-hub: fix duplicate sysfs entry error
        HID: kye: Fix missing break in kye_report_fixup()
      1008ebb6
    • Russell King's avatar
      ARM: fix asm/memory.h build error · b713aa0b
      Russell King authored
      Jason Gunthorpe reports a build failure when ARM_PATCH_PHYS_VIRT is
      not defined:
      
      In file included from arch/arm/include/asm/page.h:163:0,
                       from include/linux/mm_types.h:16,
                       from include/linux/sched.h:24,
                       from arch/arm/kernel/asm-offsets.c:13:
      arch/arm/include/asm/memory.h: In function '__virt_to_phys':
      arch/arm/include/asm/memory.h:244:40: error: 'PHYS_OFFSET' undeclared (first use in this function)
      arch/arm/include/asm/memory.h:244:40: note: each undeclared identifier is reported only once for each function it appears in
      arch/arm/include/asm/memory.h: In function '__phys_to_virt':
      arch/arm/include/asm/memory.h:249:13: error: 'PHYS_OFFSET' undeclared (first use in this function)
      
      Fixes: ca5a45c0 ("ARM: mm: use phys_addr_t appropriately in p2v and v2p conversions")
      Tested-By: default avatarJason Gunthorpe <jgunthorpe@obsidianresearch.com>
      Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      b713aa0b
    • Linus Torvalds's avatar
      Merge tag 'regulator-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator · ca336751
      Linus Torvalds authored
      Pull regulator fixes from Mark Brown:
       "A small set of driver fixes plus one larger core change which changes
        the way we check to see if we're using DT so that there aren't any
        races between deciding we're using DT and the regulator subsystem
        noticing.
      
        This makes the new support for substituting a dummy regulator and
        optional regulators work a lot better on DT systems since it ensures
        that we don't trigger probe deferral when we shouldn't which was
        causing bugs in clients"
      
      * tag 'regulator-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
        regulator: pfuze100: allow misprogrammed ID
        regulator: pfuze100: Fix address of FABID
        regulator: as3722: set the correct current limit
        regulator: core: Check for DT every time we check full constraints
        regulator: core: Replace checks of have_full_constraints with a function
      ca336751
    • Linus Torvalds's avatar
      Merge tag 'regmap-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap · 599eefa0
      Linus Torvalds authored
      Pull regmap fixes from Mark Brown:
       "Two small changes to fix some error handling and checking (both of
        which would be quite serious if the errors trigger) plus a trivial
        documentation fix"
      
      * tag 'regmap-v3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
        regmap: use IS_ERR() to check clk_get() results
        regmap: make sure we unlock on failure in regmap_bulk_write
        regmap: trivial comment fix (copy'n'paste error)
      599eefa0
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · 31f984d1
      Linus Torvalds authored
      Pull i2c fixes from Wolfram Sang:
       "Here are two simple but wanted fixes for the i2c subsystem"
      
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: imx: Check the return value from clk_prepare_enable()
        i2c: mux: Inherit retry count and timeout from parent for muxed bus
      31f984d1
    • Linus Torvalds's avatar
      Merge tag 'for-linus-20131212' of git://git.infradead.org/linux-mtd · dbb022cb
      Linus Torvalds authored
      Pull MTD fixes from Brian Norris:
       "Two MTD fixes, for the pxa3xx-nand driver:
      
         - This driver was not ready to fully Armada 370 NAND, with
           particularly notable problems seen on flash with 2KB page sizes.
           This "compatible" entry really should have been held back until
           3.14 or later.
      
         - Fix a bug seen in rare cases on the error path of a failed probe
           attempt, where we free unallocated DMA resources"
      
      * tag 'for-linus-20131212' of git://git.infradead.org/linux-mtd:
        mtd: nand: pxa3xx: Use info->use_dma to release DMA resources
        Partially revert "mtd: nand: pxa3xx: Introduce 'marvell,armada370-nand' compatible string"
      dbb022cb
    • Linus Torvalds's avatar
      Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma · f6493505
      Linus Torvalds authored
      Pull slave-dmaengine fixes from Vinod Koul:
       "Here is the common fixes PULL for dmaengine.
      
        Dan has been working on fixing the build issues in bunch of drivers.
        Here we have one fixing s3c24xx-dma, along with fix from Russell on
        pl08x.  Also we have Kuninori rcar dma fixes.  The s3c24xx-dma which
        was added in last merge window missed updates to usage of DMA_COMPLETE
        so converting the last driver"
      
      * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
        dma: fix build breakage in s3c24xx-dma
        Fix pl08x warnings
        rcar-hpbdma: initialise plane information when halted
        rcar-hpbdma: fixup channel busy check for double plane
        rcar-hpbdma: add max transfer size
        dma: mmp_pdma: add missing platform_set_drvdata() in mmp_pdma_probe()
        dmaengine: s3c24xx-dma: use DMA_COMPLETE for dma completion status
      f6493505
    • Joe Thornber's avatar
      dm array: fix a reference counting bug in shadow_ablock · ed9571f0
      Joe Thornber authored
      An old array block could have its reference count decremented below
      zero when it is being replaced in the btree by a new array block.
      
      The fix is to increment the old ablock's reference count just before
      inserting a new ablock into the btree.
      Signed-off-by: default avatarJoe Thornber <ejt@redhat.com>
      Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      Cc: stable@vger.kernel.org # 3.9+
      ed9571f0
    • Joe Thornber's avatar
      dm space map: disallow decrementing a reference count below zero · 5b564d80
      Joe Thornber authored
      The old behaviour, returning -EINVAL if a ref_count of 0 would be
      decremented, was removed in commit f722063e ("dm space map: optimise
      sm_ll_dec and sm_ll_inc").  To fix this regression we return an error
      code from the mutator function pointer passed to sm_ll_mutate() and have
      dec_ref_count() return -EINVAL if the old ref_count is 0.
      
      Add a DMERR to reflect the potential seriousness of this error.
      
      Also, add missing dm_tm_unlock() to sm_ll_mutate()'s error path.
      
      With this fix the following dmts regression test now passes:
       dmtest run --suite cache -n /metadata_use_kernel/
      
      The next patch fixes the higher-level dm-array code that exposed this
      regression.
      Signed-off-by: default avatarJoe Thornber <ejt@redhat.com>
      Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      Cc: stable@vger.kernel.org # 3.12+
      5b564d80
    • Mark Brown's avatar
    • James Morris's avatar
    • Linus Torvalds's avatar
      Merge branch 'akpm' (fixes from Andrew) · 8d276377
      Linus Torvalds authored
      Merge patches from Andrew Morton:
        "13 fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        mm: memcg: do not allow task about to OOM kill to bypass the limit
        mm: memcg: fix race condition between memcg teardown and swapin
        thp: move preallocated PTE page table on move_huge_pmd()
        mfd/rtc: s5m: fix register updating by adding regmap for RTC
        rtc: s5m: enable IRQ wake during suspend
        rtc: s5m: limit endless loop waiting for register update
        rtc: s5m: fix unsuccesful IRQ request during probe
        drivers/rtc/rtc-s5m.c: fix info->rtc assignment
        include/linux/kernel.h: make might_fault() a nop for !MMU
        drivers/rtc/rtc-at91rm9200.c: correct alarm over day/month wrap
        procfs: also fix proc_reg_get_unmapped_area() for !MMU case
        mm: memcg: do not declare OOM from __GFP_NOFAIL allocations
        include/linux/hugetlb.h: make isolate_huge_page() an inline
      8d276377
    • Johannes Weiner's avatar
      mm: memcg: do not allow task about to OOM kill to bypass the limit · 1f14c1ac
      Johannes Weiner authored
      Commit 49426420 ("mm: memcg: handle non-error OOM situations more
      gracefully") allowed tasks that already entered a memcg OOM condition to
      bypass the memcg limit on subsequent allocation attempts hoping this
      would expedite finishing the page fault and executing the kill.
      
      David Rientjes is worried that this breaks memcg isolation guarantees
      and since there is no evidence that the bypass actually speeds up fault
      processing just change it so that these subsequent charge attempts fail
      outright.  The notable exception being __GFP_NOFAIL charges which are
      required to bypass the limit regardless.
      Signed-off-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Reported-by: default avatarDavid Rientjes <rientjes@google.com>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Acked-bt: David Rientjes <rientjes@google.com>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1f14c1ac
    • Johannes Weiner's avatar
      mm: memcg: fix race condition between memcg teardown and swapin · 96f1c58d
      Johannes Weiner authored
      There is a race condition between a memcg being torn down and a swapin
      triggered from a different memcg of a page that was recorded to belong
      to the exiting memcg on swapout (with CONFIG_MEMCG_SWAP extension).  The
      result is unreclaimable pages pointing to dead memcgs, which can lead to
      anything from endless loops in later memcg teardown (the page is charged
      to all hierarchical parents but is not on any LRU list) or crashes from
      following the dangling memcg pointer.
      
      Memcgs with tasks in them can not be torn down and usually charges don't
      show up in memcgs without tasks.  Swapin with the CONFIG_MEMCG_SWAP
      extension is the notable exception because it charges the cgroup that
      was recorded as owner during swapout, which may be empty and in the
      process of being torn down when a task in another memcg triggers the
      swapin:
      
        teardown:                 swapin:
      
                                  lookup_swap_cgroup_id()
                                  rcu_read_lock()
                                  mem_cgroup_lookup()
                                  css_tryget()
                                  rcu_read_unlock()
        disable css_tryget()
        call_rcu()
          offline_css()
            reparent_charges()
                                  res_counter_charge() (hierarchical!)
                                  css_put()
                                    css_free()
                                  pc->mem_cgroup = dead memcg
                                  add page to dead lru
      
      Add a final reparenting step into css_free() to make sure any such raced
      charges are moved out of the memcg before it's finally freed.
      
      In the longer term it would be cleaner to have the css_tryget() and the
      res_counter charge under the same RCU lock section so that the charge
      reparenting is deferred until the last charge whose tryget succeeded is
      visible.  But this will require more invasive changes that will be
      harder to evaluate and backport into stable, so better defer them to a
      separate change set.
      Signed-off-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
      Acked-by: default avatarMichal Hocko <mhocko@suse.cz>
      Cc: David Rientjes <rientjes@google.com>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      96f1c58d
    • Kirill A. Shutemov's avatar
      thp: move preallocated PTE page table on move_huge_pmd() · 3592806c
      Kirill A. Shutemov authored
      Andrey Wagin reported crash on VM_BUG_ON() in pgtable_pmd_page_dtor() with
      fallowing backtrace:
      
        free_pgd_range+0x2bf/0x410
        free_pgtables+0xce/0x120
        unmap_region+0xe0/0x120
        do_munmap+0x249/0x360
        move_vma+0x144/0x270
        SyS_mremap+0x3b9/0x510
        system_call_fastpath+0x16/0x1b
      
      The crash can be reproduce with this test case:
      
        #define _GNU_SOURCE
        #include <sys/mman.h>
        #include <stdio.h>
        #include <unistd.h>
      
        #define MB (1024 * 1024UL)
        #define GB (1024 * MB)
      
        int main(int argc, char **argv)
        {
      	char *p;
      	int i;
      
      	p = mmap((void *) GB, 10 * MB, PROT_READ | PROT_WRITE,
      			MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0);
      	for (i = 0; i < 10 * MB; i += 4096)
      		p[i] = 1;
      	mremap(p, 10 * MB, 10 * MB, MREMAP_FIXED | MREMAP_MAYMOVE, 2 * GB);
      	return 0;
        }
      
      Due to split PMD lock, we now store preallocated PTE tables for THP
      pages per-PMD table.  It means we need to move them to other PMD table
      if huge PMD moved there.
      Signed-off-by: default avatarKirill A. Shutemov <kirill.shutemov@linux.intel.com>
      Reported-by: default avatarAndrey Vagin <avagin@openvz.org>
      Tested-by: default avatarAndrey Vagin <avagin@openvz.org>
      Reviewed-by: default avatarNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3592806c
    • Krzysztof Kozlowski's avatar
      mfd/rtc: s5m: fix register updating by adding regmap for RTC · 3e1e4a5f
      Krzysztof Kozlowski authored
      Rename old regmap field of "struct sec_pmic_dev" to "regmap_pmic" and
      add new regmap for RTC.
      
      On S5M8767A registers were not properly updated and read due to usage of
      the same regmap as the PMIC.  This could be observed in various hangs,
      e.g.  in infinite loop during waiting for UDR field change.
      
      On this chip family the RTC has different I2C address than PMIC so
      additional regmap is needed.
      Signed-off-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
      Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
      Reviewed-by: default avatarMark Brown <broonie@linaro.org>
      Acked-by: default avatarSangbeom Kim <sbkim73@samsung.com>
      Cc: Samuel Ortiz <sameo@linux.intel.com>
      Cc: Lee Jones <lee.jones@linaro.org>
      Cc: Liam Girdwood <lgirdwood@gmail.com>
      Cc: Alessandro Zummo <a.zummo@towertech.it>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Kyungmin Park <kyungmin.park@samsung.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      3e1e4a5f
    • Krzysztof Kozlowski's avatar
      rtc: s5m: enable IRQ wake during suspend · 222ead7f
      Krzysztof Kozlowski authored
      Add PM suspend/resume ops to rtc-s5m driver and enable IRQ wake during
      suspend so the RTC would act like a wake up source.  This allows waking
      up from suspend to RAM on RTC alarm interrupt.
      Signed-off-by: default avatarKrzysztof Kozlowski <k.kozlowski@samsung.com>
      Signed-off-by: default avatarKyungmin Park <kyungmin.park@samsung.com>
      Cc: Mark Brown <broonie@linaro.org>
      Acked-by: default avatarSangbeom Kim <sbkim73@samsung.com>
      Cc: Samuel Ortiz <sameo@linux.intel.com>
      Cc: Lee Jones <lee.jones@linaro.org>
      Cc: Liam Girdwood <lgirdwood@gmail.com>
      Cc: Alessandro Zummo <a.zummo@towertech.it>
      Cc: Marek Szyprowski <m.szyprowski@samsung.com>
      Cc: Geert Uytterhoeven <geert@linux-m68k.org>
      Cc: Kyungmin Park <kyungmin.park@samsung.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      222ead7f