As a preparation to splitting the code we need to untangle it:

x86_hyper_xen -> x86_hyper_xen_hvm and x86_hyper_xen_pv
xen_platform() -> xen_platform_hvm() and xen_platform_pv()
xen_cpu_up_prepare() -> xen_cpu_up_prepare_pv() and xen_cpu_up_prepare_hvm()
xen_cpu_dead() -> xen_cpu_dead_pv() and xen_cpu_dead_pv_hvm()

Add two parameters to xen_cpuhp_setup() to pass proper cpu_up_prepare and
cpu_dead hooks. xen_set_cpu_features() is now PV-only so the redundant
xen_pv_domain() check can be dropped.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>

Pull x86 mm updates from Ingo Molnar:
 "The main x86 MM changes in this cycle were:

   - continued native kernel PCID support preparation patches to the TLB
     flushing code (Andy Lutomirski)

   - various fixes related to 32-bit compat syscall returning address
     over 4Gb in applications, launched from 64-bit binaries - motivated
     by C/R frameworks such as Virtuozzo. (Dmitry Safonov)

   - continued Intel 5-level paging enablement: in particular the
     conversion of x86 GUP to the generic GUP code. (Kirill A. Shutemov)

   - x86/mpx ABI corner case fixes/enhancements (Joerg Roedel)

   - ... plus misc updates, fixes and cleanups"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (62 commits)
  mm, zone_device: Replace {get, put}_zone_device_page() with a single reference to fix pmem crash
  x86/mm: Fix flush_tlb_page() on Xen
  x86/mm: Make flush_tlb_mm_range() more predictable
  x86/mm: Remove flush_tlb() and flush_tlb_current_task()
  x86/vm86/32: Switch to flush_tlb_mm_range() in mark_screen_rdonly()
  x86/mm/64: Fix crash in remove_pagetable()
  Revert "x86/mm/gup: Switch GUP to the generic get_user_page_fast() implementation"
  x86/boot/e820: Remove a redundant self assignment
  x86/mm: Fix dump pagetables for 4 levels of page tables
  x86/mpx, selftests: Only check bounds-vs-shadow when we keep shadow
  x86/mpx: Correctly report do_mpx_bt_fault() failures to user-space
  Revert "x86/mm/numa: Remove numa_nodemask_from_meminfo()"
  x86/espfix: Add support for 5-level paging
  x86/kasan: Extend KASAN to support 5-level paging
  x86/mm: Add basic defines/helpers for CONFIG_X86_5LEVEL=y
  x86/paravirt: Add 5-level support to the paravirt code
  x86/mm: Define virtual memory map for 5-level paging
  x86/asm: Remove __VIRTUAL_MASK_SHIFT==47 assert
  x86/boot: Detect 5-level paging support
  x86/mm/numa: Remove numa_nodemask_from_meminfo()
  ...

Pull x86 vdso updates from Ingo Molnar:
 "Add support for vDSO acceleration of the "Hyper-V TSC page", to speed
  up clock reading on Hyper-V guests"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso: Add VCLOCK_HVCLOCK vDSO clock read method
  x86/hyperv: Move TSC reading method to asm/mshyperv.h
  x86/hyperv: Implement hv_get_tsc_page()

Pull x86 platform updates from Ingo Molnar:
 "Most of the commits are continued SGI UV4 hardware-enablement changes,
  plus there's also new Bluetooth support for the Intel Edison platform"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/intel-mid: Enable Bluetooth support on Intel Edison
  x86/platform/uv/BAU: Implement uv4_wait_completion with read_status
  x86/platform/uv/BAU: Add wait_completion to bau_operations
  x86/platform/uv/BAU: Add status mmr location fields to bau_control
  x86/platform/uv/BAU: Cleanup bau_operations declaration and instances
  x86/platform/uv/BAU: Add payload descriptor qualifier
  x86/platform/uv/BAU: Add uv_bau_version enumerated constants

Pull x86 irq update from Ingo Molnar:
 "A single commit that micro-optimizes an IRQ vectors code path in the
  CPU offlining code"

* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Optimize free vector check in the CPU offline path

Pull x86 debug updates from Ingo Molnar:
 "The biggest update is the addition of USB3 debug port based
  early-console.

  Greg was fine with the USB changes and with the routing of these
  patches:

    https://www.spinics.net/lists/linux-usb/msg155093.html"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  usb/doc: Add document for USB3 debug port usage
  usb/serial: Add DBC debug device support to usb_debug
  x86/earlyprintk: Add support for earlyprintk via USB3 debug port
  usb/early: Add driver for xhci debug capability
  x86/timers: Add simple udelay calibration

Pull x86 cleanups from Ingo Molnar:
 "A handful of small cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Remove a redundant #ifdef directive
  x86/smp: Remove the redundant #ifdef CONFIG_SMP directive
  x86/smp: Reduce code duplication
  x86/pci-calgary: Use setup_timer() instead of open coding it.

Pull x86 build update from Ingo Molnar:
 "A single CLang support related fix"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/kbuild: Use cc-option to enable -falign-{jumps/loops}

Pull x86 asm updates from Ingo Molnar:
 "The main changes in this cycle were:

   - unwinder fixes and enhancements

   - improve ftrace interaction with the unwinder

   - optimize the code footprint of WARN() and related debugging
     constructs

   - ... plus misc updates, cleanups and fixes"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
  x86/unwind: Dump all stacks in unwind_dump()
  x86/unwind: Silence more entry-code related warnings
  x86/ftrace: Fix ebp in ftrace_regs_caller that screws up unwinder
  x86/unwind: Remove unused 'sp' parameter in unwind_dump()
  x86/unwind: Prepend hex mask value with '0x' in unwind_dump()
  x86/unwind: Properly zero-pad 32-bit values in unwind_dump()
  x86/unwind: Ensure stack pointer is aligned
  debug: Avoid setting BUGFLAG_WARNING twice
  x86/unwind: Silence entry-related warnings
  x86/unwind: Read stack return address in update_stack_state()
  x86/unwind: Move common code into update_stack_state()
  debug: Fix __bug_table[] in arch linker scripts
  debug: Add _ONCE() logic to report_bug()
  x86/debug: Define BUG() again for !CONFIG_BUG
  x86/debug: Implement __WARN() using UD0
  x86/ftrace: Use Makefile logic instead of #ifdef for compiling ftrace_*.o
  x86/ftrace: Add -mfentry support to x86_32 with DYNAMIC_FTRACE set
  x86/ftrace: Clean up ftrace_regs_caller
  x86/ftrace: Add stack frame pointer to ftrace_caller
  x86/ftrace: Move the ftrace specific code out of entry_32.S
  ...

Pull x86 apic updates from Ingo Molnar:
 "Two small cleanups"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Fix a comment in init_apic_mappings()
  x86/apic: Remove the SET_APIC_ID(x) macro

Pull x86 cpu updates from Ingo Molnar:
 "The biggest changes are an extension of the Intel RDT code to extend
  it with Intel Memory Bandwidth Allocation CPU support: MBA allows
  bandwidth allocation between cores, while CBM (already upstream)
  allows CPU cache partitioning.

  There's also misc smaller fixes and updates"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/intel_rdt: Return error for incorrect resource names in schemata
  x86/intel_rdt: Trim whitespace while parsing schemata input
  x86/intel_rdt: Fix padding when resource is enabled via mount
  x86/intel_rdt: Get rid of anon union
  x86/cpu: Keep model defines sorted by model number
  x86/intel_rdt/mba: Add schemata file support for MBA
  x86/intel_rdt: Make schemata file parsers resource specific
  x86/intel_rdt/mba: Add info directory files for Memory Bandwidth Allocation
  x86/intel_rdt: Make information files resource specific
  x86/intel_rdt/mba: Add primary support for Memory Bandwidth Allocation (MBA)
  x86/intel_rdt/mba: Memory bandwith allocation feature detect
  x86/intel_rdt: Add resource specific msr update function
  x86/intel_rdt: Move CBM specific data into a struct
  x86/intel_rdt: Cleanup namespace to support multiple resource types
  Documentation, x86: Intel Memory bandwidth allocation
  x86/intel_rdt: Organize code properly
  x86/intel_rdt: Init padding only if a device exists
  x86/intel_rdt: Add cpus_list rdtgroup file
  x86/intel_rdt: Cleanup kernel-doc
  x86/intel_rdt: Update schemata read to show data in tabular format
  ...

Pull x86 boot updates from Ingo Molnar:
 "The biggest changes in this cycle were:

   - reworking of the e820 code: separate in-kernel and boot-ABI data
     structures and apply a whole range of cleanups to the kernel side.

     No change in functionality.

   - enable KASLR by default: it's used by all major distros and it's
     out of the experimental stage as well.

   - ... misc fixes and cleanups"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (63 commits)
  x86/KASLR: Fix kexec kernel boot crash when KASLR randomization fails
  x86/reboot: Turn off KVM when halting a CPU
  x86/boot: Fix BSS corruption/overwrite bug in early x86 kernel startup
  x86: Enable KASLR by default
  boot/param: Move next_arg() function to lib/cmdline.c for later reuse
  x86/boot: Fix Sparse warning by including required header file
  x86/boot/64: Rename start_cpu()
  x86/xen: Update e820 table handling to the new core x86 E820 code
  x86/boot: Fix pr_debug() API braindamage
  xen, x86/headers: Add <linux/device.h> dependency to <asm/xen/page.h>
  x86/boot/e820: Simplify e820__update_table()
  x86/boot/e820: Separate the E820 ABI structures from the in-kernel structures
  x86/boot/e820: Fix and clean up e820_type switch() statements
  x86/boot/e820: Rename the remaining E820 APIs to the e820__*() prefix
  x86/boot/e820: Remove unnecessary #include's
  x86/boot/e820: Rename e820_mark_nosave_regions() to e820__register_nosave_regions()
  x86/boot/e820: Rename e820_reserve_resources*() to e820__reserve_resources*()
  x86/boot/e820: Use bool in query APIs
  x86/boot/e820: Document e820__reserve_setup_data()
  x86/boot/e820: Clean up __e820__update_table() et al
  ...

Pull RAS updates from Ingo Molnar:
 "The main changes in this cycle were:

   - add the 'Corrected Errors Collector' kernel feature which collect
     and monitor correctable errors statistics and will preemptively
     (soft-)offline physical pages that have a suspiciously high error
     count.

   - handle MCE errors during kexec() more gracefully

   - factor out and deprecate the /dev/mcelog driver

   - ... plus misc fixes and cleanpus"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Check MCi_STATUS[MISCV] for usable addr on Intel only
  ACPI/APEI: Use setup_deferrable_timer()
  x86/mce: Update notifier priority check
  x86/mce: Enable PPIN for Knights Landing/Mill
  x86/mce: Do not register notifiers with invalid prio
  x86/mce: Factor out and deprecate the /dev/mcelog driver
  RAS: Add a Corrected Errors Collector
  x86/mce: Rename mce_log to mce_log_buffer
  x86/mce: Rename mce_log()'s argument
  x86/mce: Init some CPU features early
  x86/mce: Handle broadcasted MCE gracefully with kexec

Pull perf updates from Ingo Molnar:
 "The main changes in this cycle were:

  Kernel side changes:

   - Kprobes and uprobes changes:
      - Make their trampolines read-only while they are used
      - Make UPROBES_EVENTS default-y which is the distro practice
      - Apply misc fixes and robustization to probe point insertion.

   - add support for AMD IOMMU events

   - extend hw events on Intel Goldmont CPUs

   - ... plus misc fixes and updates.

  Tooling side changes:

   - support s390 jump instructions in perf annotate (Christian
     Borntraeger)

   - vendor hardware events updates (Andi Kleen)

   - add argument support for SDT events in powerpc (Ravi Bangoria)

   - beautify the statx syscall arguments in 'perf trace' (Arnaldo
     Carvalho de Melo)

   - handle inline functions in callchains (Jin Yao)

   - enable sorting by srcline as key (Milian Wolff)

   - add 'brstackinsn' field in 'perf script' to reuse the x86
     instruction decoder used in the Intel PT code to study hot paths to
     samples (Andi Kleen)

   - add PERF_RECORD_NAMESPACES so that the kernel can record
     information required to associate samples to namespaces, helping in
     container problem characterization. (Hari Bathini)

   - allow sorting by symbol_size in 'perf report' and 'perf top'
     (Charles Baylis)

   - in perf stat, make system wide (-a) the default option if no target
     was specified and one of following conditions is met:
      - no workload specified (current behaviour)
      - a workload is specified but all requested events are system wide
        ones, like uncore ones. (Jiri Olsa)

   - ... plus lots of other updates, enhancements, cleanups and fixes"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (235 commits)
  perf tools: Fix the code to strip command name
  tools arch x86: Sync cpufeatures.h
  tools arch: Sync arch/x86/lib/memcpy_64.S with the kernel
  tools: Update asm-generic/mman-common.h copy from the kernel
  perf tools: Use just forward declarations for struct thread where possible
  perf tools: Add the right header to obtain PERF_ALIGN()
  perf tools: Remove poll.h and wait.h from util.h
  perf tools: Remove string.h, unistd.h and sys/stat.h from util.h
  perf tools: Remove stale prototypes from builtin.h
  perf tools: Remove string.h from util.h
  perf tools: Remove sys/ioctl.h from util.h
  perf tools: Remove a few more needless includes from util.h
  perf tools: Include sys/param.h where needed
  perf callchain: Move callchain specific routines from util.[ch]
  perf tools: Add compress.h for the *_decompress_to_file() headers
  perf mem: Fix display of data source snoop indication
  perf debug: Move dump_stack() and sighandler_dump_stack() to debug.h
  perf kvm: Make function only used by 'perf kvm' static
  perf tools: Move timestamp routines from util.h to time-utils.h
  perf tools: Move units conversion/formatting routines to separate object
  ...

Pul x86/process updates from Ingo Molnar:
 "The main change in this cycle was to add the ARCH_[GET|SET]_CPUID
  prctl() ABI extension to control the availability of the CPUID
  instruction, analogously to the existing PR_GET|SET_TSC ABI that
  controls RDTSC.

  Motivation: the 'rr' user-space record-and-replay execution debugger
  would like to trap and emulate the CPUID instruction - which
  instruction is normally unprivileged.

  Trapping CPUID is possible on IvyBridge and later Intel CPUs - expose
  this hardware capability"

* 'x86-process-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/syscalls/32: Ignore arch_prctl for other architectures
  um/arch_prctl: Fix fallout from x86 arch_prctl() rework
  x86/arch_prctl: Add ARCH_[GET|SET]_CPUID
  x86/cpufeature: Detect CPUID faulting support
  x86/syscalls/32: Wire up arch_prctl on x86-32
  x86/arch_prctl: Add do_arch_prctl_common()
  x86/arch_prctl/64: Rename do_arch_prctl() to do_arch_prctl_64()
  x86/arch_prctl/64: Use SYSCALL_DEFINE2 to define sys_arch_prctl()
  x86/arch_prctl: Rename 'code' argument to 'option'
  x86/msr: Rename MISC_FEATURE_ENABLES to MISC_FEATURES_ENABLES
  x86/process: Optimize TIF_NOTSC switch
  x86/process: Correct and optimize TIF_BLOCKSTEP switch
  x86/process: Optimize TIF checks in __switch_to_xtra()

Pull locking updates from Ingo Molnar:
 "The main changes in this cycle were:

   - a big round of FUTEX_UNLOCK_PI improvements, fixes, cleanups and
     general restructuring

   - lockdep updates such as new checks for lock_downgrade()

   - introduce the new atomic_try_cmpxchg() locking API and use it to
     optimize refcount code generation

   - ... plus misc fixes, updates and cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  MAINTAINERS: Add FUTEX SUBSYSTEM
  futex: Clarify mark_wake_futex memory barrier usage
  futex: Fix small (and harmless looking) inconsistencies
  futex: Avoid freeing an active timer
  rtmutex: Plug preempt count leak in rt_mutex_futex_unlock()
  rtmutex: Fix more prio comparisons
  rtmutex: Fix PI chain order integrity
  sched,tracing: Update trace_sched_pi_setprio()
  sched/rtmutex: Refactor rt_mutex_setprio()
  rtmutex: Clean up
  sched/deadline/rtmutex: Dont miss the dl_runtime/dl_period update
  sched/rtmutex/deadline: Fix a PI crash for deadline tasks
  rtmutex: Deboost before waking up the top waiter
  locking/ww-mutex: Limit stress test to 2 seconds
  locking/atomic: Fix atomic_try_cmpxchg() semantics
  lockdep: Fix per-cpu static objects
  futex: Drop hb->lock before enqueueing on the rtmutex
  futex: Futex_unlock_pi() determinism
  futex: Rework futex_lock_pi() to use rt_mutex_*_proxy_lock()
  futex,rt_mutex: Restructure rt_mutex_finish_proxy_lock()
  ...

Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - another round of rq-clock handling debugging, robustization and
     fixes

   - PELT accounting improvements

   - CPU hotplug related ->cpus_allowed affinity handling fixes all
     around the tree

   - ... plus misc fixes, cleanups and updates"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
  sched/x86: Update reschedule warning text
  crypto: N2 - Replace racy task affinity logic
  cpufreq/sparc-us2e: Replace racy task affinity logic
  cpufreq/sparc-us3: Replace racy task affinity logic
  cpufreq/sh: Replace racy task affinity logic
  cpufreq/ia64: Replace racy task affinity logic
  ACPI/processor: Replace racy task affinity logic
  ACPI/processor: Fix error handling in __acpi_processor_start()
  sparc/sysfs: Replace racy task affinity logic
  powerpc/smp: Replace open coded task affinity logic
  ia64/sn/hwperf: Replace racy task affinity logic
  ia64/salinfo: Replace racy task affinity logic
  workqueue: Provide work_on_cpu_safe()
  ia64/topology: Remove cpus_allowed manipulation
  sched/fair: Move the PELT constants into a generated header
  sched/fair: Increase PELT accuracy for small tasks
  sched/fair: Fix comments
  sched/Documentation: Add 'sched-pelt' tool
  sched/fair: Fix corner case in __accumulate_sum()
  sched/core: Remove 'task' parameter and rename tsk_restore_flags() to current_restore_flags()
  ...

Pull EFI updates from Ingo Molnar:
 "The main changes in this cycle were:

   - move BGRT handling to drivers/acpi so it can be shared between x86
     and ARM

   - bring the EFI stub's initrd and FDT allocation logic in line with
     the latest changes to the arm64 boot protocol

   - improvements and fixes to the EFI stub's command line parsing
     routines

   - randomize the virtual mapping of the UEFI runtime services on
     ARM/arm64

   - ... and other misc enhancements, cleanups and fixes"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/libstub/arm: Don't use TASK_SIZE when randomizing the RT space
  ef/libstub/arm/arm64: Randomize the base of the UEFI rt services region
  efi/libstub/arm/arm64: Disable debug prints on 'quiet' cmdline arg
  efi/libstub: Unify command line param parsing
  efi/libstub: Fix harmless command line parsing bug
  efi/arm32-stub: Allow boot-time allocations in the vmlinux region
  x86/efi: Clean up a minor mistake in comment
  efi/pstore: Return error code (if any) from efi_pstore_write()
  efi/bgrt: Enable ACPI BGRT handling on arm64
  x86/efi/bgrt: Move efi-bgrt handling out of arch/x86
  efi/arm-stub: Round up FDT allocation to mapping size
  efi/arm-stub: Correct FDT and initrd allocation rules for arm64

Pull timer updates from Thomas Gleixner:
 "The timer departement delivers:

   - more year 2038 rework

   - a massive rework of the arm achitected timer

   - preparatory patches to allow NTP correction of clock event devices
     to avoid early expiry

   - the usual pile of fixes and enhancements all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (91 commits)
  timer/sysclt: Restrict timer migration sysctl values to 0 and 1
  arm64/arch_timer: Mark errata handlers as __maybe_unused
  Clocksource/mips-gic: Remove redundant non devicetree init
  MIPS/Malta: Probe gic-timer via devicetree
  clocksource: Use GENMASK_ULL in definition of CLOCKSOURCE_MASK
  acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver
  clocksource: arm_arch_timer: add GTDT support for memory-mapped timer
  acpi/arm64: Add memory-mapped timer support in GTDT driver
  clocksource: arm_arch_timer: simplify ACPI support code.
  acpi/arm64: Add GTDT table parse driver
  clocksource: arm_arch_timer: split MMIO timer probing.
  clocksource: arm_arch_timer: add structs to describe MMIO timer
  clocksource: arm_arch_timer: move arch_timer_needs_of_probing into DT init call
  clocksource: arm_arch_timer: refactor arch_timer_needs_probing
  clocksource: arm_arch_timer: split dt-only rate handling
  x86/uv/time: Set ->min_delta_ticks and ->max_delta_ticks
  unicore32/time: Set ->min_delta_ticks and ->max_delta_ticks
  um/time: Set ->min_delta_ticks and ->max_delta_ticks
  tile/time: Set ->min_delta_ticks and ->max_delta_ticks
  score/time: Set ->min_delta_ticks and ->max_delta_ticks
  ...

Pull irq updates from Thomas Gleixner:
 "Nothing exciting from the irq side for this merge window:

   - a new driver for a Mediatek SoC

   - ACPI support for ARM GICV3

   - support for shared nested interrupts

   - the usual pile of fixes and updates all over te place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  irqchip/mbigen: Fix return value check in mbigen_device_probe()
  irqchip/mips-gic: Replace static map with dynamic
  irqchip/mips-gic: Remove device IRQ domain
  irqchip/mips-gic: Separate IPI reservation & usage tracking
  genirq: Use irqd_get_trigger_type to compare the trigger type for shared IRQs
  genirq: Use cpumask_available() for check of cpumask variable
  cpumask: Add helper cpumask_available()
  irqchip/irq-imx-gpcv2: Clear OF_POPULATED flag
  irqchip/atmel-aic5: Handle suspend to RAM
  irqchip: Add Mediatek mtk-cirq driver
  dt-bindings: mtk-cirq: Add binding document
  irqchip/gic-v3-its: Add IORT hook for platform MSI support
  irqchip/mbigen: Add ACPI support
  irqchip/mbigen: Introduce mbigen_of_create_domain()
  irqchip/mbigen: Drop module owner
  platform-msi: Make platform_msi_create_device_domain() ACPI aware
  irqchip/gicv3-its: platform-msi: Scan MADT to create platform msi domain
  irqchip/gicv3-its: platform-msi: Refactor its_pmsi_init() to prepare for ACPI
  irqchip/gicv3-its: platform-msi: Refactor its_pmsi_prepare()
  irqchip/gic-v3-its: Keep the include header files in alphabetic order
  ...

Pull AVR32 removal from Hans-Christian Noren Egtvedt:
 "This will remove support for AVR32 architecture from the kernel and
  clean away the most obvious architecture related parts. Removing dead
  code in drivers is the next step"

Notes from previous discussion about this:
 "The AVR32 architecture is not keeping up with the development of the
  kernel, and since it shares so much of the drivers with Atmel ARM SoC,
  it is starting to hinder these drivers to develop swiftly.

  Also, all AVR32 AP7 SoC processors are end of lifed from Atmel (now
  Microchip).

  Finally, the GCC toolchain is stuck at version 4.2.x, and has not
  received any patches since the last release from Atmel;
  4.2.4-atmel.1.1.3.avr32linux.1.

  When building kernel v4.10, this toolchain is no longer able to
  properly link the network stack.

  Haavard and I have came to the conclusion that we feel keeping AVR32
  on life support offers more obstacles for Atmel ARMs, than it gives
  joy to AVR32 users. I also suspect there are very few AVR32 users left
  today, if anybody at all"

That discussion was acked by Andy Shevchenko, Boris Brezillon, Nicolas
Ferre, and Haavard Skinnemoen.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  mm: remove AVR32 arch special handling in mm/Kconfig
  lib: remove check for AVR32 arch in test_user_copy
  lib: remove AVR32 entry in Kconfig.debug compile with frame pointers
  scripts: remove AVR32 support from checkstack.pl
  docs: remove all references to AVR32 architecture
  avr32: remove support for AVR32 architecture

Starting from gcc-5.4+ gcc generates MLX instructions in more cases to
refer local symbols:

    https://gcc.gnu.org/PR60465

That caused ia64 module loader to choke on such instructions:

    fuse: invalid slot number 1 for IMM64

The Linux kernel used to handle only case where relocation pointed to
slot=2 instruction in the bundle.  That limitation was fixed in linux by
commit 9c184a07 ("[IA64] Fix 2.6 kernel for the new ia64 assembler")
See

    http://sources.redhat.com/bugzilla/show_bug.cgi?id=1433

This change lifts the slot=2 restriction from the kernel module loader.

Tested on 'fuse' and 'btrfs' kernel modules.

Cc: Markus Elfring <elfring@users.sourceforge.net>
Cc: H J Lu <hjl.tools@gmail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Bug: https://bugs.gentoo.org/601014Tested-by: Émeric MASCHINO <emeric.maschino@gmail.com>
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull uaccess unification updates from Al Viro:
 "This is the uaccess unification pile. It's _not_ the end of uaccess
  work, but the next batch of that will go into the next cycle. This one
  mostly takes copy_from_user() and friends out of arch/* and gets the
  zero-padding behaviour in sync for all architectures.

  Dealing with the nocache/writethrough mess is for the next cycle;
  fortunately, that's x86-only. Same for cleanups in iov_iter.c (I am
  sold on access_ok() in there, BTW; just not in this pile), same for
  reducing __copy_... callsites, strn*... stuff, etc. - there will be a
  pile about as large as this one in the next merge window.

  This one sat in -next for weeks. -3KLoC"

* 'work.uaccess' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (96 commits)
  HAVE_ARCH_HARDENED_USERCOPY is unconditional now
  CONFIG_ARCH_HAS_RAW_COPY_USER is unconditional now
  m32r: switch to RAW_COPY_USER
  hexagon: switch to RAW_COPY_USER
  microblaze: switch to RAW_COPY_USER
  get rid of padding, switch to RAW_COPY_USER
  ia64: get rid of copy_in_user()
  ia64: sanitize __access_ok()
  ia64: get rid of 'segment' argument of __do_{get,put}_user()
  ia64: get rid of 'segment' argument of __{get,put}_user_check()
  ia64: add extable.h
  powerpc: get rid of zeroing, switch to RAW_COPY_USER
  esas2r: don't open-code memdup_user()
  alpha: fix stack smashing in old_adjtimex(2)
  don't open-code kernel_setsockopt()
  mips: switch to RAW_COPY_USER
  mips: get rid of tail-zeroing in primitives
  mips: make copy_from_user() zero tail explicitly
  mips: clean and reorder the forest of macros...
  mips: consolidate __invoke_... wrappers
  ...

Pull generic device properties framework updates from Rafael Wysocki:
 "These add support for the ports and endpoints concepts, based on the
  existing DT support for them, to the generic device properties
  framework and update the ACPI _DSD properties code to recognize ports
  and endpoints accordingly.

  Specifics:

   - Extend the ACPI _DSD properties code and the generic device
     properties framework to support the concept of remote endponts
     (Mika Westerberg, Sakari Ailus).

   - Document the support for ports and endpoints in _DSD properties and
     extend the generic device properties framework to make it more
     suitable for the handling of ports and endpoints (Sakari Ailus)"

* tag 'devprop-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  device property: Read strings using string array reading functions
  device property: fwnode_property_read_string_array() returns nr of strings
  device property: Fix reading pset strings using array access functions
  device property: fwnode_property_read_string_array() may return -EILSEQ
  ACPI / DSD: Document references, ports and endpoints
  device property: Add fwnode_get_next_parent()
  device property: Add support for fwnode endpoints
  device property: Make dev_fwnode() public
  of: Add of_fwnode_handle() to convert device nodes to fwnode_handle
  device property: Add fwnode_handle_get()
  device property: Add support for remote endpoints
  ACPI / property: Add support for remote endpoints
  device property: Add fwnode_get_named_child_node()
  ACPI / property: Add fwnode_get_next_child_node()
  device property: Add fwnode_get_parent()
  ACPI / property: Add possiblity to retrieve parent firmware node

Pull ACPI updates from Rafael Wysocki:
 "These are some device enumeration code changes, updates of the AC and
  battery drivers to help them avoid attaching to devices that cannot be
  handled by them, new operation region driver for the Intel CHT Whiskey
  Cove PMIC, new sysfs entries for CPPC performance capabilities, a new
  _REV quirk blacklist entry and a couple of assorted minor fixes and
  cleanups.

  Specifics:

   - Update the core device enumeration code to make it more internally
     consistent and robust and drop the force_remove sysfs attribute
     that could be used to tell it to ignore errors on device
     hot-removal which was dangerous in general and no real and still
     relevant use cases for it could be found (Rafael Wysocki, Michal
     Hocko).

   - Make the core device enumeration code use _PXM to associate
     platform devices created by it with specific NUMA nodes (Shanker
     Donthineni).

   - Extend the CPPC library by adding more sysfs entries for
     performance capabilities to it and making it use the lowest
     nonlinear performance parameter (Prashanth Prakash).

   - Make the CPU online more consistent with CPU initialization in the
     ACPI processor driver (Prashanth Prakash).

   - Update the AC and battery drivers to help them avoid attaching to
     devices that cannot be handled by them and update the
     axp288_charger power supply driver to work correctly on ACPI
     systems without the INT3496 device (Hans de Goede).

   - Add an ACPI operation region driver for the Intel CHT Whiskey Cove
     PMIC and update the xpower operation region driver to work without
     IIO which isn't really necessary for it to work (Hans de Goede).

   - Add a new entry for Dell Inspiron 7537 to the _REV quirk blacklist
     (Kai Heng Feng).

   - Make the code in the ACPI video driver easier to follow by adding
     symbols and comments to it (Dmitry Frank).

   - Update ACPI documentation and drop a function that has no users
     from the tables-handling code (Cao jin, Baoquan He)"

* tag 'acpi-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: Stop xpower OPRegion handler relying on IIO
  ACPI / PMIC: Add opregion driver for Intel CHT Whiskey Cove PMIC
  ACPI / scan: Avoid enumerating devices more than once
  ACPI / scan: Apply default enumeration to devices with ACPI drivers
  power: supply: axp288_charger: Only wait for INT3496 device if present
  ACPI / AC: Add a blacklist with PMIC ACPI HIDs with a native charger driver
  ACPI / battery: Add a blacklist with PMIC ACPI HIDs with a native battery driver
  ACPI / battery: Fix acpi_battery_exit on acpi_battery_init_async errors
  ACPI / utils: Add new acpi_dev_present helper
  ACPI / video: add comments about subtle cases
  ACPI / video: get rid of magic numbers and use enum instead
  ACPI / doc: linuxized-acpica.txt: fix typos
  ACPI / blacklist: add _REV quirk for Dell Inspiron 7537
  ACPI / tables: Drop acpi_parse_entries() which is not used
  ACPI / CPPC: add sysfs entries for CPPC perf capabilities
  ACPI / CPPC: Read lowest nonlinear perf in cppc_get_perf_caps()
  ACPI / platform: Update platform device NUMA node based on _PXM method
  ACPI / Processor: Drop setup_max_cpus check from acpi_processor_add()
  ACPI / scan: Drop support for force_remove

Pull power management updates from Rafael Wysocki:
 "This time the majority of changes go to the cpufreq subsystem (and to
  the intel_pstate driver in particular) and there are some updates in
  the generic power domains framework, cpuidle, tools and a couple of
  other places.

  One thing worth mentioning is that the intel_pstate's sysfs interface
  has been reworked to be more consistent with the general expectations
  of the cpufreq core and less confusing, hopefully for the better.
  Also, we have a new cpufreq driver for Tegra186 and new hardware
  support in intel_pstata and the Mediatek cpufreq driver.

  Apart from that, the AnalyzeSuspend utility for system suspend
  profiling gets a companion called AnalyzeBoot for the analogous
  profiling of system boot and they both go into one place under
  tools/power/pm-graph/.

  The rest is mostly fixes, cleanups and code reorganization.

  Specifics:

   - Rework the intel_pstate driver's sysfs interface to make it more
     straightforward and more intuitive (Rafael Wysocki).

   - Make intel_pstate support all processors which advertise HWP
     (hardware-managed P-states) to the kernel in all operation modes
     and make it use the load-based P-state selection algorithm on a
     wider range of systems in the active mode (Rafael Wysocki).

   - Add cpufreq driver for Tegra186 (Mikko Perttunen).

   - Add support for Gemini Lake SoCs to intel_pstate (David Box).

   - Add support for MT8176 and MT817x to the Mediatek cpufreq driver
     and clean up that driver a bit (Daniel Kurtz).

   - Clean up intel_pstate and optimize it slightly (Rafael Wysocki).

   - Update the schedutil cpufreq governor, mostly to fix a couple of
     issues with it related to specific workloads, and rework its sysfs
     tunable and initialization a bit (Rafael Wysocki, Viresh Kumar).

   - Fix minor issues in the imx6q, dbx500 and qoriq cpufreq drivers
     (Christophe Jaillet, Irina Tirdea, Leonard Crestez, Viresh Kumar,
     YuanTian Tang).

   - Add file patterns for cpufreq DT bindings to MAINTAINERS (Geert
     Uytterhoeven).

   - Add support for "always on" power domains to the genpd (generic
     power domains) framework and clean up that code somewhat (Ulf
     Hansson, Lina Iyer, Viresh Kumar).

   - Fix minor issues in the powernv cpuidle driver and clean it up
     (Anton Blanchard, Gautham Shenoy).

   - Move the AnalyzeSuspend utility under tools/power/pm-graph/ and add
     an analogous boot-profiling utility called AnalyzeBoot to it (Todd
     Brandt).

   - Add rk3328 support to the rockchip-io AVS (Adaptive Voltage
     Scaling) driver (David Wu).

   - Fix minor issues in the cpuidle core, the intel_pstate_tracer
     utility, the devfreq framework and the PM core documentation
     (Chanwoo Choi, Doug Smythies, Johan Hovold, Marcin Nowakowski)"

* tag 'pm-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (56 commits)
  PM / runtime: Document autosuspend-helper side effects
  PM / runtime: Fix autosuspend documentation
  tools: power: pm-graph: Package makefile and man pages
  tools: power: pm-graph: AnalyzeBoot v2.0
  tools: power: pm-graph: AnalyzeSuspend v4.6
  cpufreq: Add Tegra186 cpufreq driver
  cpufreq: imx6q: Fix error handling code
  cpufreq: imx6q: Set max suspend_freq to avoid changes during suspend
  cpufreq: imx6q: Fix handling EPROBE_DEFER from regulator
  cpuidle: powernv: Avoid a branch in the core snooze_loop() loop
  cpuidle: powernv: Don't continually set thread priority in snooze_loop()
  cpuidle: powernv: Don't bounce between low and very low thread priority
  cpuidle: cpuidle-cps: remove unused variable
  tools/power/x86/intel_pstate_tracer: Adjust directory ownership
  cpufreq: schedutil: Use policy-dependent transition delays
  cpufreq: schedutil: Reduce frequencies slower
  PM / devfreq: Move struct devfreq_governor to devfreq directory
  PM / Domains: Ignore domain-idle-states that are not compatible
  cpufreq: intel_pstate: Add support for Gemini Lake
  powernv-cpuidle: Validate DT property array size
  ...

Pull cgroup updates from Tejun Heo:
 "Nothing major. Two notable fixes are Li's second stab at fixing the
  long-standing race condition in the mount path and suppression of
  spurious warning from cgroup_get(). All other changes are trivial"

* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: mark cgroup_get() with __maybe_unused
  cgroup: avoid attaching a cgroup root to two different superblocks, take 2
  cgroup: fix spurious warnings on cgroup_is_dead() from cgroup_sk_alloc()
  cgroup: move cgroup_subsys_state parent field for cache locality
  cpuset: Remove cpuset_update_active_cpus()'s parameter.
  cgroup: switch to BUG_ON()
  cgroup: drop duplicate header nsproxy.h
  kernel: convert css_set.refcount from atomic_t to refcount_t
  kernel: convert cgroup_namespace.count from atomic_t to refcount_t

Pull workqueue update from Tejun Heo:
 "One trivial patch to use setup_deferrable_timer() instead of
  open-coding the initialization"

* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: use setup_deferrable_timer

Pull libata updates from Tejun Heo:
 "The biggest core change is removal of SCT WRITE SAME support, which
  never worked properly.

  Other than that, trivial updates in core code and specific embedded
  driver updates"

* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: remove SCT WRITE SAME support
  libata: reject passthrough WRITE SAME requests
  dt-bindings: ata: add DT bindings for ahci-dm816 SATA controller
  ata: ahci: add support for DaVinci DM816 SATA controller
  pata: remove the at91 driver
  libata: make ata_sg_clean static over again
  libata: use setup_deferrable_timer
  ata: allow subsystem to be used on m32r and s390 archs
  Delete redundant return value check of platform_get_resource()
  ata: constify of_device_id structures

Pull LED updates from Jacek Anaszewski:
 "New drivers:

   - add LED support for MT6323 PMIC

   - add LED support for Motorola CPCAP PMIC

  New features and improvements:

   - add LED trigger for all CPUs aggregated which is useful on tiny
     boards with more CPU cores than LED pins

   - add OF variants of LED registering functions as a preparation for
     adding generic support for Device Tree parsing

   - dell-led improvements and cleanups, followed by moving it to the
     x86 platform driver subsystem which is a more appropriate place for
     it

   - extend pca9532 Device Tree support by adding the LEDs
     'default-state' property

   - extend pca963x Device Tree support by adding nxp,inverted-out
     property for inverting the polarity of the output

   - remove ACPI support for lp3952 since it relied on a non-official
     ACPI IDs"

* tag 'leds_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: pca9532: Extend pca9532 device tree support
  leds: cpcap: new driver
  mfd: cpcap: Add missing include dependencies
  leds: lp3952: Use 'if (ret)' pattern
  leds: lp3952: Remove ACPI support for lp3952
  leds: mt6323: Fix an off by one bug in probe
  dt-bindings: leds: Add document bindings for leds-mt6323
  leds: Add LED support for MT6323 PMIC
  leds: gpio: use OF variant of LED registering function
  leds: core: add OF variants of LED registering functions
  platform/x86: dell-wmi-led: fix coding style issues
  dell-led: move driver to drivers/platform/x86/dell-wmi-led.c
  dell-led: remove code related to mic mute LED
  platform/x86: dell-laptop: import dell_micmute_led_set() from drivers/leds/dell-led.c
  ALSA: hda - rename dell_led_set_func to dell_micmute_led_set_func
  ALSA: hda - use dell_micmute_led_set() instead of dell_app_wmi_led_set()
  dell-led: remove GUID check from dell_micmute_led_set()
  leds/trigger/cpu: Add LED trigger for all CPUs aggregated

Pull mailbox updates from Jassi Brar:

 - new driver for Broadcom FlexRM controller

 - constify data structures of callback functions in some drivers

 - a few bug fixes uncovered by multi-threaded use of mailbox channels
   in blocking mode

* 'mailbox-for-next' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: handle empty message in tx_tick
  mailbox: skip complete wait event if timer expired
  mailbox: always wait in mbox_send_message for blocking Tx mode
  mailbox: Remove depends on COMPILE_TEST for BCM_FLEXRM_MBOX
  mailbox: check ->last_tx_done for NULL in case of timer-based polling
  dt-bindings: Add DT bindings info for FlexRM ring manager
  mailbox: Add driver for Broadcom FlexRM ring manager
  dt-bindings: mailbox: Update doc with NSP PDC/mailbox support
  mailbox: bcm-pdc: Add Northstar Plus support to PDC driver
  mailbox: constify mbox_chan_ops structures

Pull IPMI updates from Corey Minyard:
 "A few fixes of things in the IPMI area, the watchdog would have issues
  at panic time cause by a recently introduced change, a problem with
  device numbering, one possible panic in the I2C driver (destined for
  stable).

  Nothing earth-shattering, but some things that need to go in"

* tag 'for-linux-4.12' of git://github.com/cminyard/linux-ipmi:
  ipmi/watchdog: fix wdog hang on panic waiting for ipmi response
  ipmi_si: use smi_num for init_name
  ipmi: bt-bmc: Add ast2500 compatible string
  ACPI / IPMI: change warning to debug on timeout
  ACPI / IPMI: allow ACPI_IPMI with IPMI_SSIF
  ipmi_ssif: use setup_timer
  ipmi: Fix kernel panic at ipmi_ssif_thread()

Pull HSI fix from Sebastian Reichel:
 "Fix double free fix in ssi-protocol"

* tag 'hsi-for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: ssi_protocol: double free in ssip_pn_xmit()

Pull power supply and reset updates from Sebastian Reichel:
 "New drivers:
   - gemini-poweroff
   - cpcap-charger (for Motorola Droid 4)
   - battery-lego-ev3 (for LEGO Mindstorms EV3)

  New chip/feature support:
   - bq24190-charger: add runtime PM support
   - bq24190-charger: add bq24192i support
   - register masking for syscon-poweroff

  ... and misc small fixes & cleanups

* tag 'for-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (29 commits)
  power: supply: bq24190_charger: Use new extcon_register_notifier_all()
  power: supply: bq24190_charger: Longer delay while polling reset flag
  power: supply: bq24190_charger: Uniform pm_runtime_get() failure handling
  power: supply: bq24190_charger: Clean up extcon code
  power: supply: bq24190_charger: Limit over/under voltage fault logging
  power: supply: New driver for LEGO MINDSTORMS EV3 battery
  dt-bindings: power: supply: New bindings for LEGO MINDSTORMS EV3 battery
  power: supply: tps65217: remove debug messages for function calls
  power: supply: ltc2941-battery-gauge: Add OF device ID table
  power: supply: ltc2941-battery-gauge: Add vendor to compatibles in binding
  power: supply: charger-manager: simplify return statements
  power: supply: lp8788: prevent out of bounds array access
  power: supply: cpcap-charger: Add minimal CPCAP PMIC battery charger
  power: supply: bq24190_charger: Use extcon to determine ilimit, 5v boost
  power: supply: bq24190_charger: Add support for bq24192i
  power: supply: bq24190_charger: Use i2c-core irq-mapping code
  power: bq24190_charger: mark PM functions as __maybe_unused
  power: supply: sbs-charger: simplified bool function
  power: supply: ab8500: Replaced spaces with tabs in indent
  power: supply: bq25890: Use gpiod_get()
  ...

a590b90d ("cgroup: fix spurious warnings on cgroup_is_dead() from
cgroup_sk_alloc()") converted most cgroup_get() usages to
cgroup_get_live() leaving cgroup_sk_alloc() the sole user of
cgroup_get().  When !CONFIG_SOCK_CGROUP_DATA, this ends up triggering
unused warning for cgroup_get().

Silence the warning by adding __maybe_unused to cgroup_get().
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: http://lkml.kernel.org/r/20170501145340.17e8ef86@canb.auug.org.auSigned-off-by: Tejun Heo <tj@kernel.org>

Merge tag 'hwmon-for-linus-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:

 - removed twl4030-madc driver

 - added ASPEED PWM/fan driver

 - various minor improvements and fixes in several drivers

* tag 'hwmon-for-linus-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits)
  hwmon: (twl4030-madc) drop driver
  hwmon: (tmp103) Use SIMPLE_DEV_PM_OPS helper macro
  hwmon: (adt7475) set start bit in probe
  hwmon: (ina209) Handled signed registers
  hwmon: (lm87) Add OF device ID table
  hwmon: (lm87) Remove unused I2C devices driver_data
  drivers: hwmon: Support for ASPEED PWM/Fan tach
  Documentation: dt-bindings: Document bindings for ASPEED AST2400/AST2500 PWM and Fan tach controller device driver
  hwmon: (lm87) Allow channel data to be set from dts file
  Documentation: dtb: lm87: Add hwmon binding documentation
  hwmon: (ads7828) Accept optional parameters from device tree
  hwmon: (dell-smm) Add Dell XPS 15 9560 into DMI list
  hwmon: Constify str parameter of hwmon_ops->read_string
  dt: Add vendor prefix for Sensirion
  hwmon: (tmp421) Add OF device ID table
  hwmon: (tmp103) Add OF device ID table
  hwmon: (tmp102) Add OF device ID table
  hwmon: (stts751) Add OF device ID table
  hwmon: (ucd9200) Add OF device ID table
  hwmon: (ucd9000) Add OF device ID table
  ...

Pull EDAC updates from Borislav Petkov:

 - an EDAC driver for Cavium ThunderX RAS IP (Sergey Temerkhanov)

 - removal of DRAM error reporting through PCI SERR NMI (Borislav
   Petkov)

 - misc small fixes (Jan Glauber, Thor Thayer)

* tag 'edac_for_4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, ghes: Do not enable it by default
  EDAC: Rename report status accessors
  EDAC: Delete edac_stub.c
  EDAC: Update Kconfig help text
  EDAC: Remove EDAC_MM_EDAC
  EDAC: Issue tracepoint only when it is defined
  ACPI/extlog: Add EDAC dependency
  EDAC: Move edac_op_state to edac_mc.c
  EDAC: Remove edac_err_assert
  EDAC: Get rid of edac_handlers
  x86/nmi, EDAC: Get rid of DRAM error reporting thru PCI SERR NMI
  EDAC, highbank: Align Makefile directives
  EDAC, thunderx: Remove unused code
  EDAC, thunderx: Change LMC index calculation
  EDAC, altera: Fix peripheral warnings for Cyclone5
  EDAC, thunderx: Fix L2C MCI interrupt disable
  EDAC, thunderx: Add Cavium ThunderX EDAC driver

Pull second round of block layer updates from Jens Axboe:

 - Further fixups to the NVMe APST code, from Andy.

 - Various fixes for (mostly) nvme-fc, from Christoph and James.

 - NVMe scsi fixes from Jon and Christoph.

* 'for-4.12/post-merge' of git://git.kernel.dk/linux-block: (39 commits)
  nvme-scsi: remove nvme_trans_security_protocol
  nvme-lightnvm: add missing endianess conversion in nvme_nvm_end_io
  nvme-scsi: Consider LBA format in IO splitting calculation
  nvme-fc: avoid memory corruption caused by calling nvmf_free_options() twice
  lpfc: Fix memory corruption of the lpfc_ncmd->list pointers
  nvme: Add nvme_core.force_apst to ignore the NO_APST quirk
  nvme: Display raw APST configuration via DYNAMIC_DEBUG
  nvme: Fix APST comment
  lpfc revison 11.2.0.12
  Fix Express lane queue creation.
  Update ABORT processing for NVMET.
  Fix implicit logo and RSCN handling for NVMET
  Add Fabric assigned WWN support.
  Fix max_sgl_segments settings for NVME / NVMET
  Fix crash after issuing lip reset
  Fix driver load issues when MRQ=8
  Remove hba lock from NVMET issue WQE.
  Fix nvme initiator handling when not enabled.
  Fix driver usage of 128B WQEs when WQ_CREATE is V1.
  Fix driver unload/reload operation.
  ...

Pull block layer updates from Jens Axboe:

 - Add BFQ IO scheduler under the new blk-mq scheduling framework. BFQ
   was initially a fork of CFQ, but subsequently changed to implement
   fairness based on B-WF2Q+, a modified variant of WF2Q. BFQ is meant
   to be used on desktop type single drives, providing good fairness.
   From Paolo.

 - Add Kyber IO scheduler. This is a full multiqueue aware scheduler,
   using a scalable token based algorithm that throttles IO based on
   live completion IO stats, similary to blk-wbt. From Omar.

 - A series from Jan, moving users to separately allocated backing
   devices. This continues the work of separating backing device life
   times, solving various problems with hot removal.

 - A series of updates for lightnvm, mostly from Javier. Includes a
   'pblk' target that exposes an open channel SSD as a physical block
   device.

 - A series of fixes and improvements for nbd from Josef.

 - A series from Omar, removing queue sharing between devices on mostly
   legacy drivers. This helps us clean up other bits, if we know that a
   queue only has a single device backing. This has been overdue for
   more than a decade.

 - Fixes for the blk-stats, and improvements to unify the stats and user
   windows. This both improves blk-wbt, and enables other users to
   register a need to receive IO stats for a device. From Omar.

 - blk-throttle improvements from Shaohua. This provides a scalable
   framework for implementing scalable priotization - particularly for
   blk-mq, but applicable to any type of block device. The interface is
   marked experimental for now.

 - Bucketized IO stats for IO polling from Stephen Bates. This improves
   efficiency of polled workloads in the presence of mixed block size
   IO.

 - A few fixes for opal, from Scott.

 - A few pulls for NVMe, including a lot of fixes for NVMe-over-fabrics.
   From a variety of folks, mostly Sagi and James Smart.

 - A series from Bart, improving our exposed info and capabilities from
   the blk-mq debugfs support.

 - A series from Christoph, cleaning up how handle WRITE_ZEROES.

 - A series from Christoph, cleaning up the block layer handling of how
   we track errors in a request. On top of being a nice cleanup, it also
   shrinks the size of struct request a bit.

 - Removal of mg_disk and hd (sorry Linus) by Christoph. The former was
   never used by platforms, and the latter has outlived it's usefulness.

 - Various little bug fixes and cleanups from a wide variety of folks.

* 'for-4.12/block' of git://git.kernel.dk/linux-block: (329 commits)
  block: hide badblocks attribute by default
  blk-mq: unify hctx delay_work and run_work
  block: add kblock_mod_delayed_work_on()
  blk-mq: unify hctx delayed_run_work and run_work
  nbd: fix use after free on module unload
  MAINTAINERS: bfq: Add Paolo as maintainer for the BFQ I/O scheduler
  blk-mq-sched: alloate reserved tags out of normal pool
  mtip32xx: use runtime tag to initialize command header
  scsi: Implement blk_mq_ops.show_rq()
  blk-mq: Add blk_mq_ops.show_rq()
  blk-mq: Show operation, cmd_flags and rq_flags names
  blk-mq: Make blk_flags_show() callers append a newline character
  blk-mq: Move the "state" debugfs attribute one level down
  blk-mq: Unregister debugfs attributes earlier
  blk-mq: Only unregister hctxs for which registration succeeded
  blk-mq-debugfs: Rename functions for registering and unregistering the mq directory
  blk-mq: Let blk_mq_debugfs_register() look up the queue name
  blk-mq: Register <dev>/queue/mq after having registered <dev>/queue
  ide-pm: always pass 0 error to ide_complete_rq in ide_do_devset
  ide-pm: always pass 0 error to __blk_end_request_all
  ..

AVR32 architecture has been removed from the Linux kernel sources, hence
clean up the special handling setting two quicklists by default in
mm/Kconfig.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>