- 11 Jul, 2014 40 commits
-
-
Peter Zijlstra authored
commit 46ce0fe9 upstream. When removing a (sibling) event we do: raw_spin_lock_irq(&ctx->lock); perf_group_detach(event); raw_spin_unlock_irq(&ctx->lock); <hole> perf_remove_from_context(event); raw_spin_lock_irq(&ctx->lock); ... raw_spin_unlock_irq(&ctx->lock); Now, assuming the event is a sibling, it will be 'unreachable' for things like ctx_sched_out() because that iterates the groups->siblings, and we just unhooked the sibling. So, if during <hole> we get ctx_sched_out(), it will miss the event and not call event_sched_out() on it, leaving it programmed on the PMU. The subsequent perf_remove_from_context() call will find the ctx is inactive and only call list_del_event() to remove the event from all other lists. Hereafter we can proceed to free the event; while still programmed! Close this hole by moving perf_group_detach() inside the same ctx->lock region(s) perf_remove_from_context() has. The condition on inherited events only in __perf_event_exit_task() is likely complete crap because non-inherited events are part of groups too and we're tearing down just the same. But leave that for another patch. Most-likely-Fixes: e03a9a55 ("perf: Change close() semantics for group events") Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Tested-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140505093124.GN17778@laptop.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> [bwh: Backported to 3.2: drop change in perf_pmu_migrate_context()] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
James Bottomley authored
commit f2495e22 upstream. In the highly unusual case where two threads are running concurrently through the scanning code scanning the same target, we run into the situation where one may allocate the target while the other is still using it. In this case, because the reap checks for STARGET_CREATED and kills the target without reference counting, the second thread will do the wrong thing on reap. Fix this by reference counting even creates and doing the STARGET_CREATED check in the final put. Tested-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
James Bottomley authored
commit e63ed0d7 upstream. This patch eliminates the reap_ref and replaces it with a proper kref. On last put of this kref, the target is removed from visibility in sysfs. The final call to scsi_target_reap() for the device is done from __scsi_remove_device() and only if the device was made visible. This ensures that the target disappears as soon as the last device is gone rather than waiting until final release of the device (which is often too long). Reviewed-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
-
Bart Van Assche authored
commit b485462a upstream. Avoid that the code for requeueing SCSI requests triggers a crash by making sure that that code isn't scheduled anymore after a device has been removed. Also, source code inspection of __scsi_remove_device() revealed a race condition in this function: no new SCSI requests must be accepted for a SCSI device after device removal started. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Mike Christie <michaelc@cs.wisc.edu> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 83ff42fc upstream. This patch fixes a left-over se_lun->lun_sep pointer OOPs when one of the /sys/kernel/config/target/$FABRIC/$WWPN/$TPGT/lun/$LUN/alua* attributes is accessed after the $DEVICE symlink has been removed. To address this bug, go ahead and clear se_lun->lun_sep memory in core_dev_unexport(), so that the existing checks for show/store ALUA attributes in target_core_fabric_configfs.c work as expected. Reported-by:
Sebastian Herbszt <herbszt@gmx.de> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Markos Chandras authored
commit ab6c15bc upstream. Previously, the lower limit for the MIPS SC initialization loop was set incorrectly allowing one extra loop leading to writes beyond the MSC ioremap'd space. More precisely, the value of the 'imp' in the last loop increased beyond the msc_irqmap_t boundaries and as a result of which, the 'n' variable was loaded with an incorrect value. This value was used later on to calculate the offset in the MSC01_IC_SUP which led to random crashes like the following one: CPU 0 Unable to handle kernel paging request at virtual address e75c0200, epc == 8058dba4, ra == 8058db90 [...] Call Trace: [<8058dba4>] init_msc_irqs+0x104/0x154 [<8058b5bc>] arch_init_irq+0xd8/0x154 [<805897b0>] start_kernel+0x220/0x36c Kernel panic - not syncing: Attempted to kill the idle task! This patch fixes the problem Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7118/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Alex Smith authored
commit 91ad11d7 upstream. On MIPS calls to _mcount in modules generate 2 instructions to load the _mcount address (and therefore 2 relocations). The mcount_loc table should only reference the first of these, so the second is filtered out by checking the relocation offset and ignoring ones that immediately follow the previous one seen. However if a module has an _mcount call at offset 0, the second relocation would not be filtered out due to old_r_offset == 0 being taken to mean that the current relocation is the first one seen, and both would end up in the mcount_loc table. This results in ftrace_make_nop() patching both (adjacent) instructions to branches over the _mcount call sequence like so: 0xffffffffc08a8000: 04 00 00 10 b 0xffffffffc08a8014 0xffffffffc08a8004: 04 00 00 10 b 0xffffffffc08a8018 0xffffffffc08a8008: 2d 08 e0 03 move at,ra ... The second branch is in the delay slot of the first, which is defined to be unpredictable - on the platform on which this bug was encountered, it triggers a reserved instruction exception. Fix by initializing old_r_offset to ~0 and using that instead of 0 to determine whether the current relocation is the first seen. Signed-off-by:
Alex Smith <alex.smith@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7098/Signed-off-by:
-
Zhaowei Yuan authored
commit 1539fb9b upstream. If user uses wrong ioctl command with _IOC_NONE and argument size greater than 0, it can cause NULL pointer access from memset of line 463. If _IOC_NONE, don't memset to 0 for kdata. Signed-off-by:
Zhaowei Yuan <zhaowei.yuan@samsung.com> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> [bwh: Backported to 3.2: adjust indentation] Signed-off-by:
-
Hugh Dickins authored
commit d05f0cdc upstream. In v2.6.34 commit 9d8cebd4 ("mm: fix mbind vma merge problem") introduced vma merging to mbind(), but it should have also changed the convention of passing start vma from queue_pages_range() (formerly check_range()) to new_vma_page(): vma merging may have already freed that structure, resulting in BUG at mm/mempolicy.c:1738 and probably worse crashes. Fixes: 9d8cebd4 ("mm: fix mbind vma merge problem") Reported-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Tested-by:
Hugh Dickins <hughd@google.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Minchan Kim <minchan.kim@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.2: - Adjust context - Keep the same arguments to migrate_pages() except for private=start] Signed-off-by:
-
Minchan Kim authored
commit 08270807 upstream. Revert commit 0def08e3 because check_range can't fail in migrate_to_node with considering current usecases. Quote from Johannes : I think it makes sense to revert. Not because of the semantics, but I : just don't see how check_range() could even fail for this callsite: : : 1. we pass mm->mmap->vm_start in there, so we should not fail due to : find_vma() : : 2. we pass MPOL_MF_DISCONTIG_OK, so the discontig checks do not apply : and so can not fail : : 3. we pass MPOL_MF_MOVE | MPOL_MF_MOVE_ALL, the page table loops will : continue until addr == end, so we never fail with -EIO And I added a new VM_BUG_ON for checking migrate_to_node's future usecase which might pass to MPOL_MF_STRICT. Suggested-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
Minchan Kim <minchan@kernel.org> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vasiliy Kulikov <segooon@gmail.com> Acked-by:
-
Naoya Horiguchi authored
commit 4a705fef upstream. There's a race between fork() and hugepage migration, as a result we try to "dereference" a swap entry as a normal pte, causing kernel panic. The cause of the problem is that copy_hugetlb_page_range() can't handle "swap entry" family (migration entry and hwpoisoned entry) so let's fix it. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Andy Lutomirski authored
commit 554086d8 upstream. The bad syscall nr paths are their own incomprehensible route through the entry control flow. Rearrange them to work just like syscalls that return -ENOSYS. This fixes an OOPS in the audit code when fast-path auditing is enabled and sysenter gets a bad syscall nr (CVE-2014-4508). This has probably been broken since Linux 2.6.27: af0575bb i386 syscall audit fast-path Cc: Roland McGrath <roland@redhat.com> Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/e09c499eade6fc321266dd6b54da7beb28d6991c.1403558229.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Greg Kroah-Hartman authored
commit 206a81c1 upstream. The lzo decompressor can, if given some really crazy data, possibly overrun some variable types. Modify the checking logic to properly detect overruns before they happen. Reported-by:
"Don A. Bailey" <donb@securitymouse.com> Tested-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Markus F.X.J. Oberhumer authored
commit 8b975bd3 upstream. This commit updates the kernel LZO code to the current upsteam version which features a significant speed improvement - benchmarking the Calgary and Silesia test corpora typically shows a doubled performance in both compression and decompression on modern i386/x86_64/powerpc machines. Signed-off-by:
Markus F.X.J. Oberhumer <markus@oberhumer.com> Signed-off-by:
-
Markus F.X.J. Oberhumer authored
commit b6bec26c upstream. Rename the source file to match the function name and thereby also make room for a possible future even slightly faster "non-safe" decompressor version. Signed-off-by:
-
Oleg Nesterov authored
commit 4af4206b upstream. syscall_regfunc() and syscall_unregfunc() should set/clear TIF_SYSCALL_TRACEPOINT system-wide, but do_each_thread() can race with copy_process() and miss the new child which was not added to the process/thread lists yet. Change copy_process() to update the child's TIF_SYSCALL_TRACEPOINT under tasklist. Link: http://lkml.kernel.org/p/20140413185854.GB20668@redhat.com Fixes: a871bd33 "tracing: Add syscall tracepoints" Acked-by:
Frederic Weisbecker <fweisbec@gmail.com> Acked-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Rafał Miłecki authored
commit 2fc68eb1 upstream. Support for firmware rev 508+ was added years ago, but we never noticed it reports channel in a different way for G-PHY devices. Instead of offset from 2400 MHz it simply passes channel id (AKA hw_value). So far it was (most probably) affecting monitor mode users only, but the following recent commit made it noticeable for quite everybody: commit 3afc2167 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Mar 4 16:50:13 2014 +0200 cfg80211/mac80211: ignore signal if the frame was heard on wrong channel Reported-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Tested-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 8edcb0ba upstream. On USB we can not get atomically TKIP key. We have to disable support for TKIP acceleration on USB hardware to avoid bug as showed bellow. [ 860.827243] BUG: scheduling while atomic: hostapd/3397/0x00000002 <snip> [ 860.827280] Call Trace: [ 860.827282] [<ffffffff81682ea6>] dump_stack+0x4d/0x66 [ 860.827284] [<ffffffff8167eb9b>] __schedule_bug+0x47/0x55 [ 860.827285] [<ffffffff81685bb3>] __schedule+0x733/0x7b0 [ 860.827287] [<ffffffff81685c59>] schedule+0x29/0x70 [ 860.827289] [<ffffffff81684f8a>] schedule_timeout+0x15a/0x2b0 [ 860.827291] [<ffffffff8105ac50>] ? ftrace_raw_event_tick_stop+0xc0/0xc0 [ 860.827294] [<ffffffff810c13c2>] ? __module_text_address+0x12/0x70 [ 860.827296] [<ffffffff81686823>] wait_for_completion_timeout+0xb3/0x140 [ 860.827298] [<ffffffff81080fc0>] ? wake_up_state+0x20/0x20 [ 860.827301] [<ffffffff814d5b3d>] usb_start_wait_urb+0x7d/0x150 [ 860.827303] [<ffffffff814d5cd5>] usb_control_msg+0xc5/0x110 [ 860.827305] [<ffffffffa02fb0c6>] rt2x00usb_vendor_request+0xc6/0x160 [rt2x00usb] [ 860.827307] [<ffffffffa02fb215>] rt2x00usb_vendor_req_buff_lock+0x75/0x150 [rt2x00usb] [ 860.827309] [<ffffffffa02fb393>] rt2x00usb_vendor_request_buff+0xa3/0xe0 [rt2x00usb] [ 860.827311] [<ffffffffa023d1a3>] rt2x00usb_register_multiread+0x33/0x40 [rt2800usb] [ 860.827314] [<ffffffffa05805f9>] rt2800_get_tkip_seq+0x39/0x50 [rt2800lib] [ 860.827321] [<ffffffffa0480f88>] ieee80211_get_key+0x218/0x2a0 [mac80211] [ 860.827322] [<ffffffff815cc68c>] ? __nlmsg_put+0x6c/0x80 [ 860.827329] [<ffffffffa051b02e>] nl80211_get_key+0x22e/0x360 [cfg80211] Reported-and-tested-by:
Peter Wu <lekensteyn@gmail.com> Reported-and-tested-by:
Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Johan Hedberg authored
commit ba15a58b upstream. From the Bluetooth Core Specification 4.1 page 1958: "if both devices have set the Authentication_Requirements parameter to one of the MITM Protection Not Required options, authentication stage 1 shall function as if both devices set their IO capabilities to DisplayOnly (e.g., Numeric comparison with automatic confirmation on both devices)" So far our implementation has done user confirmation for all just-works cases regardless of the MITM requirements, however following the specification to the word means that we should not be doing confirmation when neither side has the MITM flag set. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Tested-by:
Szymon Janc <szymon.janc@tieto.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> [bwh: Backported to 3.2: s/conn->flags/conn->pend/] Signed-off-by:
-
Johan Hedberg authored
commit e694788d upstream. The conn->link_key variable tracks the type of link key in use. It is set whenever we respond to a link key request as well as when we get a link key notification event. These two events do not however always guarantee that encryption is enabled: getting a link key request and responding to it may only mean that the remote side has requested authentication but not encryption. On the other hand, the encrypt change event is a certain guarantee that encryption is enabled. The real encryption state is already tracked in the conn->link_mode variable through the HCI_LM_ENCRYPT bit. This patch fixes a check for encryption in the hci_conn_auth function to use the proper conn->link_mode value and thereby eliminates the chance of a false positive result. Signed-off-by:
-
Lars-Peter Clausen authored
commit 883a1d49 upstream. The ALSA control code expects that the range of assigned indices to a control is continuous and does not overflow. Currently there are no checks to enforce this. If a control with a overflowing index range is created that control becomes effectively inaccessible and unremovable since snd_ctl_find_id() will not be able to find it. This patch adds a check that makes sure that controls with a overflowing index range can not be created. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Lars-Peter Clausen authored
commit ac902c11 upstream. Each control gets automatically assigned its numids when the control is created. The allocation is done by incrementing the numid by the amount of allocated numids per allocation. This means that excessive creation and destruction of controls (e.g. via SNDRV_CTL_IOCTL_ELEM_ADD/REMOVE) can cause the id to eventually overflow. Currently when this happens for the control that caused the overflow kctl->id.numid + kctl->count will also over flow causing it to be smaller than kctl->id.numid. Most of the code assumes that this is something that can not happen, so we need to make sure that it won't happen Signed-off-by:
-
Lars-Peter Clausen authored
commit fd9f26e4 upstream. A control that is visible on the card->controls list can be freed at any time. This means we must not access any of its memory while not holding the controls_rw_lock. Otherwise we risk a use after free access. Signed-off-by:
-
Lars-Peter Clausen authored
commit 82262a46 upstream. There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by:
-
Lars-Peter Clausen authored
commit 07f4d9d7 upstream. The user-control put and get handlers as well as the tlv do not protect against concurrent access from multiple threads. Since the state of the control is not updated atomically it is possible that either two write operations or a write and a read operation race against each other. Both can lead to arbitrary memory disclosure. This patch introduces a new lock that protects user-controls from concurrent access. Since applications typically access controls sequentially than in parallel a single lock per card should be fine. Signed-off-by:
-
Alan Stern authored
commit b0a50e92 upstream. Leandro Liptak reports that his HASEE E200 computer hangs when we ask the BIOS to hand over control of the EHCI host controller. This definitely sounds like a bug in the BIOS, but at the moment there is no way to fix it. This patch works around the problem by avoiding the handoff whenever the motherboard and BIOS version match those of Leandro's computer. Signed-off-by:
Leandro Liptak <leandroliptak@gmail.com> Tested-by:
-
Thomas Gleixner authored
commit 27e35715 upstream. When the rtmutex fast path is enabled the slow unlock function can create the following situation: spin_lock(foo->m->wait_lock); foo->m->owner = NULL; rt_mutex_lock(foo->m); <-- fast path free = atomic_dec_and_test(foo->refcnt); rt_mutex_unlock(foo->m); <-- fast path if (free) kfree(foo); spin_unlock(foo->m->wait_lock); <--- Use after free. Plug the race by changing the slow unlock to the following scheme: while (!rt_mutex_has_waiters(m)) { /* Clear the waiters bit in m->owner */ clear_rt_mutex_waiters(m); owner = rt_mutex_owner(m); spin_unlock(m->wait_lock); if (cmpxchg(m->owner, owner, 0) == owner) return; spin_lock(m->wait_lock); } So in case of a new waiter incoming while the owner tries the slow path unlock we have two situations: unlock(wait_lock); lock(wait_lock); cmpxchg(p, owner, 0) == owner mark_rt_mutex_waiters(lock); acquire(lock); Or: unlock(wait_lock); lock(wait_lock); mark_rt_mutex_waiters(lock); cmpxchg(p, owner, 0) != owner enqueue_waiter(); unlock(wait_lock); lock(wait_lock); wakeup_next waiter(); unlock(wait_lock); lock(wait_lock); acquire(lock); If the fast path is disabled, then the simple m->owner = NULL; unlock(m->wait_lock); is sufficient as all access to m->owner is serialized via m->wait_lock; Also document and clarify the wakeup_next_waiter function as suggested by Oleg Nesterov. Reported-by:
-
Thomas Gleixner authored
commit 82084984 upstream. When we walk the lock chain, we drop all locks after each step. So the lock chain can change under us before we reacquire the locks. That's harmless in principle as we just follow the wrong lock path. But it can lead to a false positive in the dead lock detection logic: T0 holds L0 T0 blocks on L1 held by T1 T1 blocks on L2 held by T2 T2 blocks on L3 held by T3 T4 blocks on L4 held by T4 Now we walk the chain lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 -> drop locks T2 times out and blocks on L0 Now we continue: lock T2 -> lock L0 -> deadlock detected, but it's not a deadlock at all. Brad tried to work around that in the deadlock detection logic itself, but the more I looked at it the less I liked it, because it's crystal ball magic after the fact. We actually can detect a chain change very simple: lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 -> next_lock = T2->pi_blocked_on->lock; drop locks T2 times out and blocks on L0 Now we continue: lock T2 -> if (next_lock != T2->pi_blocked_on->lock) return; So if we detect that T2 is now blocked on a different lock we stop the chain walk. That's also correct in the following scenario: lock T1 -> lock L2 -> adjust L2 -> unlock T1 -> lock T2 -> adjust T2 -> next_lock = T2->pi_blocked_on->lock; drop locks T3 times out and drops L3 T2 acquires L3 and blocks on L4 now Now we continue: lock T2 -> if (next_lock != T2->pi_blocked_on->lock) return; We don't have to follow up the chain at that point, because T2 propagated our priority up to T4 already. [ Folded a cleanup patch from peterz ] Signed-off-by:
Brad Mouring <bmouring@ni.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20140605152801.930031935@linutronix.de [bwh: Backported to 3.2: adjust filename, context] Signed-off-by:
-
Thomas Gleixner authored
commit 3d5c9340 upstream. Even in the case when deadlock detection is not requested by the caller, we can detect deadlocks. Right now the code stops the lock chain walk and keeps the waiter enqueued, even on itself. Silly not to yell when such a scenario is detected and to keep the waiter enqueued. Return -EDEADLK unconditionally and handle it at the call sites. The futex calls return -EDEADLK. The non futex ones dequeue the waiter, throw a warning and put the task into a schedule loop. Tagged for stable as it makes the code more robust. Signed-off-by:
-
Andrey Ryabinin authored
commit 624483f3 upstream. While working address sanitizer for kernel I've discovered use-after-free bug in __put_anon_vma. For the last anon_vma, anon_vma->root freed before child anon_vma. Later in anon_vma_free(anon_vma) we are referencing to already freed anon_vma->root to check rwsem. This fixes it by freeing the child anon_vma before freeing anon_vma->root. Signed-off-by:
Andrey Ryabinin <a.ryabinin@samsung.com> Acked-by:
-
David Henningsson authored
commit 2041d564 upstream. According to the bug reporter (Данило Шеган), the external mic starts to work and has proper jack detection if only pin 0x19 is marked properly as an external headset mic. AlsaInfo at https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1328587/+attachment/4128991/+files/AlsaInfo.txt BugLink: https://bugs.launchpad.net/bugs/1328587Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Mimi Zohar authored
commit 2fb1c9a4 upstream. Calculating the 'security.evm' HMAC value requires access to the EVM encrypted key. Only the kernel should have access to it. This patch prevents userspace tools(eg. setfattr, cp --preserve=xattr) from setting/modifying the 'security.evm' HMAC value directly. Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Signed-off-by:
-
Michael Neuling authored
commit 59a53afe upstream. OPAL will mark a CPU that is guarded as "bad" in the status property of the CPU node. Unfortunatley Linux doesn't check this property and will put the bad CPU in the present map. This has caused hangs on booting when we try to unsplit the core. This patch checks the CPU is avaliable via this status property before putting it in the present map. Signed-off-by:
Michael Neuling <mikey@neuling.org> Tested-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Gabor Juhos authored
commit 23afeb61 upstream. On some AR934x based systems, where the frequency of the AHB bus is relatively high, the built-in watchdog causes a spurious restart when it gets enabled. The possible cause of these restarts is that the timeout value written into the TIMER register does not reaches the hardware in time. Add an explicit delay into the ath79_wdt_enable function to avoid the spurious restarts. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Andy Lutomirski authored
commit a3c54931 upstream. Fixes an easy DoS and possible information disclosure. This does nothing about the broken state of x32 auditing. eparis: If the admin has enabled auditd and has specifically loaded audit rules. This bug has been around since before git. Wow... Signed-off-by:
Eric Paris <eparis@redhat.com> Signed-off-by:
-
Christian König authored
commit 0986c1a5 upstream. When we set the valid bit on invalid GART entries they are loaded into the TLB when an adjacent entry is loaded. This poisons the TLB with invalid entries which are sometimes not correctly removed on TLB flush. For stable inclusion the patch probably needs to be modified a bit. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> [bwh: Backported to 3.2: R600_PTE_GART is not defined and we list all the flags indvidually] Signed-off-by:
-
Chris Mason authored
commit 7d788742 upstream. We need to NULL the cached_state after freeing it, otherwise we might free it again if find_delalloc_range doesn't find anything. Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
J. Bruce Fields authored
commit 48385408 upstream. 27b11428 ("nfsd4: remove lockowner when removing lock stateid") introduced a memory leak. Reported-by:
Jeff Layton <jeff.layton@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Benjamin Tissoires authored
commit d49cb7ae upstream. commit 421e08c4 fixed the reported min/max for the X and Y axis, but unfortunately, it broke the resolution of those same axis. On the t540p, the resolution is the same regarding X and Y. It is not a problem for xf86-input-synaptics because this driver is only interested in the ratio between X and Y. Unfortunately, xf86-input-cmt uses directly the resolution, and having a null resolution leads to some divide by 0 errors, which are translated by -infinity in the resulting coordinates. Reported-by:
Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> [bwh: Backported to 3.2: I didn't apply the PNP ID changes, so the code being moved looks different] Signed-off-by:
-
Hans de Goede authored
commit fb4f8f56 upstream. The touchpad on the GIGABYTE U2442 not only stops communicating when we try to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS versions also when we set bit 1 (enable two finger mode auto correct). I've asked the original reporter of: https://bugzilla.kernel.org/show_bug.cgi?id=61151 To check that not setting bit 1 does not lead to any adverse effects on his model / BIOS revision, and it does not, so this commit fixes the touchpad not working on these versions by simply never setting bit 1 for laptop models with the no_hw_res quirk. Reported-and-tested-by:
James Lademann <jwlademann@gmail.com> Tested-by:
Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
