- 10 Apr, 2023 7 commits
-
-
kyrie wu authored
Add a atomic_t variable for initialization of hw dev. Signed-off-by:
kyrie wu <kyrie.wu@mediatek.com> Signed-off-by:
irui wang <irui.wang@mediatek.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org>
-
kyrie wu authored
Refactor some variables to reduce redundancy and optimize the initialization process. Signed-off-by:
-
kyrie wu authored
remove is_jpgenc_multihw, is_jpgdec_multihw, and unnecessary initialization. Signed-off-by:
-
kyrie wu authored
exclude is_jpgenc_multihw or is_jpgdec_multihw for judgment, and re-initialize jpeg worker. Signed-off-by:
-
kyrie wu authored
1. Move removing buffer after sw setting and before hw setting in enc&dec worker to prevents the operation of removing the buffer twice if the sw setting fails. 2. Remove the redundant operation of queue work in the jpegenc irq handler because the jpegenc worker has called v4l2_m2m_job_finish to do it. Fixes: 5fb1c236 ("mtk-jpegenc: add jpeg encode worker interface") Fixes: dedc2150 ("media: mtk-jpegdec: add jpeg decode worker interface") Signed-off-by:
-
kyrie wu authored
add single core initial function to init reg_base, irq and clk. Signed-off-by:
-
kyrie wu authored
some chips have multi-hw, but others have only one, modify the condition of multi-hw judgement Fixes: 934e8bcc ("mtk-jpegenc: support jpegenc multi-hardware") Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
- 20 Mar, 2023 33 commits
-
-
Sakari Ailus authored
VIDEO_V4L2_SUBDEV_API is required for v4l2_subdev_get_pad_*() functions. Select it. Fixes: ("media: i2c: ov2685: Add .get_selection() support") Signed-off-by:Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Neil Armstrong authored
Convert the Amlogic Meson IR remote control receiver bindings to dt-schema. Take in account the used variant with amlogic,meson-gx-ir. Reviewed-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Shravan Chippa authored
Add new supported link frequency in dt example. Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
Shravan Chippa <shravan.chippa@microchip.com> Signed-off-by:
-
Shravan Chippa authored
Some platforms may not be capable of supporting the bandwidth required for 12 bit or 3840x2160@60 resolutions. Add support for dynamically selecting 10 bit and 1920x1080@30 resolutions while leaving the existing configuration as default. Reviewed-by:
Jacopo Mondi <jacopo.mondi@ideasonboard.com> CC: Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
Prakash Battu <Prakash.Battu@microchip.com> Signed-off-by:
-
Shravan Chippa authored
There are some missing reset reg_mode values for the 3840x2160@60 resolution. The camera sensor still works in 3840x2160@60 resolution mode because of the register reset values. This is an issue when we change the modes dynamically. As an example, when we change the mode from 1920x1080@30 resolution to 3840x2160@60 resoultion then the mode values will be written to the registers from the array mode_3840x2160_regs[] which gives the wrong output which is incorrect resolution. So add the missing reset values to the mode_3840x2160_regs[]. Reviewed-by:
-
Shravan Chippa authored
For every mode we will get new set of values for hbalnk so use __v4l2_ctrl_modify_range() to support multi modes for hblank. The hblank value is readonly in the driver. because of this the function returns error if we try to change. so added dumy return case in imx334_set_ctrl function. Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Miaoqian Lin authored
We should call v4l2_ctrl_request_hdl_put() instead of v4l2_ctrl_request_put_hdl(). Fix the typo. Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Venus Linux driver loads firmware based on firmware-name property and some DTS already have it: msm8996-oneplus3.dtb: video-codec@c00000: Unevaluated properties are not allowed ('firmware-name', 'interconnect-names', 'interconnects' were unexpected) Signed-off-by:Rob Herring <robh@kernel.org> Signed-off-by:
-
Krzysztof Kozlowski authored
Venus on Qualcomm SM8250 uses Operating Performance Points (both in DTS and driver): sm8250-hdk.dtb: video-codec@aa00000: 'operating-points-v2', 'opp-table' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by:
-
Krzysztof Kozlowski authored
Venus on Qualcomm SDM845 uses Operating Performance Points (in Linux driver). Signed-off-by:
-
Krzysztof Kozlowski authored
Venus on Qualcomm SC7280 uses Operating Performance Points (both in DTS and driver): sc7280-crd-r3.dtb: video-codec@aa00000: Unevaluated properties are not allowed ('operating-points-v2', 'opp-table' were unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
Venus on Qualcomm SC7180 uses Operating Performance Points (both in DTS and driver): sc7180-idp.dtb: video-codec@aa00000: Unevaluated properties are not allowed ('operating-points-v2', 'opp-table' were unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
Venus on Qualcomm MSM8996 defines interconnects: apq8096-db820c.dtb: video-codec@c00000: Unevaluated properties are not allowed ('interconnect-names', 'interconnects' were unexpected) Signed-off-by: -
Krzysztof Kozlowski authored
All Qualcomm SoC Venus bindings share a lot of properties, so split common part to re-usable schema to reduce the duplication and promote unified style. Signed-off-by:
-
Krzysztof Kozlowski authored
Cleanup the Qualcomm SoC Venus bindings: - Drop unneeded blank lines and quotes, - Fix indentation in example to 4-space (to match DT schema bindings style), - Add SoC name in each title. Signed-off-by:
-
Laurent Pinchart authored
The control handler is leaked in some probe-time error paths, as well as in the remove path. Fix it. Fixes: 66d8c9d2 ("media: i2c: Add MAX9286 driver") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
-
Robert Mader authored
Analogous to e.g. the imx219. This enables propagating V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION values. The motivation is to allow libcamera detect these values from the device tree and propagate them further to e.g. Pipewire. While at it, reserve space for 3 additional controls even if v4l2_ctrl_new_fwnode_properties() can only register 2 of them, to fix the existing implementation which reserve space for 8 controls but actually registers 9. [Sakari Ailus: Rewrapped the commit message and removed changelog] Signed-off-by:
Robert Mader <robert.mader@collabora.com> Reviewed-by:
-
Bingbu Cao authored
It is not expected that trying to set the sensor to streaming mode when trying to set initial sensor configuration. Signed-off-by:
Bingbu Cao <bingbu.cao@intel.com> Signed-off-by:
-
Arec Kao authored
Tell ACPI device PM code that the driver supports the device being in non-zero ACPI D state when the driver's probe function is entered. Also do identification on the first access of the device, whether in probe or when starting streaming. Signed-off-by:
Arec Kao <arec.kao@intel.com> Signed-off-by:
-
Luca Weiss authored
Add support for the .get_selection() pad operation to the ov2685 sensor driver. Report the native sensor size (pixel array), the crop bounds (readable pixel array area) and the current and default analog crop rectangles. Reviewed-by:
Luca Weiss <luca@z3ntu.xyz> Signed-off-by:
-
Luca Weiss authored
Add V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION controls to the ov2685 driver by attempting to parse them from firmware. Signed-off-by:
-
Luca Weiss authored
If the sensor doens't power up correctly, for example due to incorrect devicetree description, the power up i2c writes will fail. Add an error print for this situation. Reviewed-by:
-
Laurent Pinchart authored
The imx296 driver uses the subdev active state, there's no need to implement the .get_fmt() operation manually. Use the v4l2_subdev_get_fmt() helper instead. Signed-off-by:
-
Jacopo Mondi authored
The ov5670 driver tries to get a reference to the xvclk provider by using the common cock framework and deflects to parsing the "clock-frequency" property in case the clock provider is not specified in the firmware interface, detected by checking if ov5670->xvclk == PTR_ERR(-ENOENT). However, as reported by the Smatch static checker, if CONFIG_HAVE_CLK is not enabled, devm_clk_get() returns 0 which when passed to PTR_ERR() means success causing the driver to fail without propagating any error code up. Explicitly handle the case where ov5670->xvclk it set to NULL, forcing the code to parse the "clock-frequency" property in case CONFIG_HAVE_CLK is not enabled, as suggested by Dan Carpenter. Reported-by:
Dan Carpenter <error27@gmail.com> Suggested-by:
-
Krzysztof Kozlowski authored
The st,stm32-cec.yaml was moved to media/cec directory, however the "remove" part disappeared during applying. Link: https://lore.kernel.org/all/20221208103115.25512-3-krzysztof.kozlowski@linaro.org/ Fixes: 8f437662 ("media: dt-bindings: st,stm32-cec: move to cec subfolder") Signed-off-by:
-
Luca Weiss authored
Currently the driver always configures the sensor for dual-lane MIPI output, but it also supports single-lane output. Add support for that by checking the data-lanes fwnode property how many lanes are used and configure the necessary registers based on that. To achieve this we move setting register 0x3018 out of the general reg sequence so we set it to the correct value. The pixel_rate value also needs to be adjusted. [Sakari Ailus: Use div_s64 to divide a 64-bit number] Signed-off-by:
-
Luca Weiss authored
Replace the unusual const char *err_msg usage with dev_err_probe which also handles -EPROBE_DEFER better by not printing the message to kmsg. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Samsung S5C73M3 8Mp camera ISP bindings to DT schema. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Samsung S5P/Exynos Camera Subsystem (FIMC) bindings to DT schema. Changes during conversion - adjust to existing DTS and Linux driver: add iommus and power-domains. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Samsung Exynos4212/4412 SoC Imaging Subsystem (FIMC-IS) bindings to DT schema. Changes during conversion - adjust to existing DTS and Linux driver: add iommus and power-domains. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Samsung Exynos SoC series camera host interface (FIMC-LITE) bindings to DT schema. Changes during conversion - adjust to existing DTS and Linux driver: add iommus and power-domains. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Samsung S5P/Exynos SoC series MIPI CSI-2 receiver (MIPI CSIS) bindings to DT schema. Changes during conversion - adjust to existing DTS and Linux driver: 1. Add phys and power-domains. 2. Move samsung,csis-wclk property to the endpoint node. Signed-off-by:
-
Krzysztof Kozlowski authored
Convert the Samsung S5K5BAF image sensor bindings to DT schema. Signed-off-by:
-
