- 21 Jan, 2015 8 commits
-
-
Arnaldo Carvalho de Melo authored
Removing boilerplate from two places, where one would have to find the first entry, then iterate using symbol__next_by_name + strcmp to see if the next member had the same name. Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/n/tip-eh73z8gthv20yowirmx2yk38@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
The find_probe_trace_events_from_map() searches matching symbol from a map (so from a backing dso). For uprobes, it'll create a new map (and dso) and loads it using a filter. It's a little bit inefficient in that it'll read out the symbol table everytime but works well anyway. For kprobes however, it'll reuse existing kernel map which might be loaded before. In this case map__load() just returns with no result. It makes kprobes always failed to find symbol even if it exists in the map (dso). To fix it, use map__find_symbol_by_name() instead. It'll load a map with full symbols and sorts them by name. It needs to search sibing nodes since there can be multiple (local) symbols with same name. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/1421234288-22758-3-git-send-email-namhyung@kernel.org [ Use symbol__next_by_name ] Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Given a symbol, go to the next entry in a rbtree sorted by symbol name. Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/n/tip-aq210drxprnu2so4dye5xa3j@git.kernel.orgSigned-off-by:
-
Namhyung Kim authored
When a dso contains multiple symbols which have same name, current dso__find_symbol_by_name() only finds an one of them and there's no way to get the all symbols without going through the rbtree. So make symbols__find_by_name() return the first entry with the given name and the next patch in this series will provide a way to iterate from there, by the name ordered rb_tree, till a suitable symbol is found. Signed-off-by:
-
Rabin Vincent authored
The lock prefix handling fails to free the strdup()'d name as well as the fields allocated by the instruction parsing. Signed-off-by:
Rabin Vincent <rabin@rab.in> Cc: Paul Mackerras <paulus@samba.org> Link: http://lkml.kernel.org/r/1421607621-15005-2-git-send-email-rabin@rab.inSigned-off-by:
-
Rabin Vincent authored
Don't use the ins's ->sncprintf() if the parsing failed. For example, this fixes the display of "imul %edx". Without this patch: | imul (null),(null) After this patch: | imul %edx Signed-off-by: -
Wang Nan authored
When building perf for arm64 I hit a warning (and be treated as an error) like below: aarch64-oe-linux-gcc -o .../scripts/perl/Perf-Trace-Util/Context.o -c -Wbad-function-cast \ ... scripts/perl/Perf-Trace-Util/Context.c In file included from .../usr/lib64/perl/5.14.3/CORE/perl.h:2464:0, from Context.xs:23: /.../usr/lib64/perl/5.14.3/CORE/handy.h:108:0: error: "bool" redefined [-Werror] # define bool char ^ In file included from /.../usr/src/kernel/tools/include/linux/types.h:4:0, from /.../usr/src/kernel/arch/arm64/include/uapi/asm/sigcontext.h:19, from /.../usr/include/bits/sigcontext.h:27, from /.../usr/include/signal.h:340, from /.../usr/include/sys/param.h:28, from /.../usr/lib64/perl/5.14.3/CORE/perl.h:678, from Context.xs:23: /.../usr/lib/aarch64-oe-linux/gcc/aarch64-oe-linux/4.9.2/include/stdbool.h:33:0: note: this is the location of the previous definition #define bool _Bool Looks like the failure is caused by arm64 uapi/asm/sigcontext.h, which includes linux/types.h while other archs not. Current perl consider this problem: http://perl5.git.perl.org/perl.git/commit/bd31be4baa3ee68abdb92c0db3200efe0fad903b However there are users which use old version of perl. This patch includes stdbool.h before Context.xs and define HAS_BOOL to prevent perl'e headers define its own 'bool'. Code is learn from perl's git tree. Signed-off-by:Wang Nan <wangnan0@huawei.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
[acme@mica ~]$ trace -p 3330 Error: Unable to find debugfs Hint: Was your kernel was compiled with debugfs support? ^^^ ^^^ Hint: Is the debugfs filesystem mounted? Hint: Try 'sudo mount -t debugfs nodev /sys/kernel/debug' Fix it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-kb9s0xy5z8i51abdu4bgm3rv@git.kernel.orgSigned-off-by:
-
- 17 Jan, 2015 1 commit
-
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix segfault when using both the map symtab viewer and annotation in the TUI (Namhyung Kim). - uClibc build fixes (Alexey Brodkin, Vineet Gupta). - bitops/hweight were moved from tools/perf/ too tools/include, move some leftovers (Arnaldo Carvalho de Melo) - Fix dwarf unwind x86_64 build error (Namhyung Kim) - Fix __machine__findnew_thread() error path (Namhyung Kim) - Propagate error code when write(2) failed in 'perf probe' (Namhyung Kim) - Use dwfl_report_elf() instead of offline in powerpc bits to properly handle non prelinked DSOs (Sukadev Bhattiprolu). - Fix dwarf unwind using libunwind in 'perf test' (Wang Nan) Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 16 Jan, 2015 12 commits
-
-
Sukadev Bhattiprolu authored
dwfl_report_offline() works only when libraries are prelinked. Replace dwfl_report_offline() with dwfl_report_elf() so we correctly extract debug info even from libraries that are not prelinked. Reported-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Tested-by:
-
Namhyung Kim authored
Currently the symbol structure is allocated with symbol_conf.priv_size to carry sideband information like annotation, map browser on TUI and sort-by-name tree node. So retrieving these information from symbol needs to care about the details of such placement. However the annotation code just assumes that the symbol is placed after the struct annotation. But actually there's other info between them. So accessing those struct will lead to an undefined behavior (usually a crash) after they write their info to the same location. To reproduce the problem, please follow the steps below: 1. run perf report (TUI of course) with -v option 2. open map browser (by pressing right arrow key for any entry) 3. search any function (by pressing '/' key and input whatever..) 4. return to the hist browser (by pressing 'q' or left arrow key) 5. open annotation window for the same entry (by pressing 'a' key) Signed-off-by:
-
Wang Nan authored
Perf tool fails to unwind user stack if the event raises in a shared object. This patch improves tests/dwarf-unwind.c to demonstrate the problem by utilizing commonly used glibc function "bsearch". If perf is not statically linked, the testcase will try to unwind a mixed call trace. By debugging libunwind I found that there is a bug in unwind-libunwind: it always passes 0 as segbase to libunwind, cause libunwind unable to locate debug_frame entry fir first level ip address (I add some more debugging output into libunwind to make things clear): >_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4 >_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388 >_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc >lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc) ... >lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc) >_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found >put_rs_cache: unmasking signals/interrupts and releasing lock >_Uarm_dwarf_step: returning -10 >_Uarm_step: dwarf_step()=-10 This patch passes map->start as segbase to dwarf_find_debug_frame(), so di will be initialized correctly. In addition, dso and executable are different when setting segbase. This patch first check whether the elf is executable, and pass segbase only for shared object. Signed-off-by:Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.comSigned-off-by:
-
Vineet Gupta authored
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers) Also seen on ARM uClibc based tools ------- ARC build ---------->8------------- CC util/evlist.o In file included from ~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0, from util/../perf-sys.h:10, from util/../perf.h:15, from util/event.h:7, from util/event.c:3: ~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0: warning: "__NR_fcntl64" redefined [enabled by default] #define __NR_fcntl64 __NR3264_fcntl ^ In file included from ~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0, from util/../perf-sys.h:6, ----------------->8------------------- ------- ARM build ---------->8------------- CC FPIC plugin_scsi.o In file included from util/../perf-sys.h:9:0, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0: warning: "__NR_restart_syscall" redefined [enabled by default] In file included from ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0, from util/../perf-sys.h:6, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0: note: this is the location of the previous definition ----------------->8------------------- Signed-off-by:Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.comSigned-off-by:
-
Vineet Gupta authored
----------------->8------------------ CC bench/sched-pipe.o In file included from builtin-annotate.c:13:0: util/cache.h:76:15: warning: redundant redeclaration of 'strlcpy' [-Wredundant-decls] extern size_t strlcpy(char *dest, const char *src, size_t size); ^ In file included from util/util.h:55:0, from builtin.h:4, from builtin-annotate.c:8: ~/vineetg/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/string.h:396:15: note: previous declaration of 'strlcpy' was here extern size_t strlcpy(char *__restrict dst, const char *__restrict src, ----------------->8------------------ Signed-off-by: -
Alexey Brodkin authored
ARC Linux uses the no legacy syscalls abi and corresponding uClibc headers statfs defines f_type to be U32 which causes perf build breakage http://git.uclibc.org/uClibc/tree/libc/sysdeps/linux/common-generic/bits/statfs.h ----------->8--------------- CC fs/fs.o fs/fs.c: In function 'fs__valid_mount': fs/fs.c:82:24: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] else if (st_fs.f_type != magic) ^ cc1: all warnings being treated as errors ----------->8--------------- Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
We need to use lib/hweight.c for that, just like we do for lib/rbtree.c, so tools need to link hweight.o. For now do it directly, but we need to have a tools/lib/lk.a or .so that collects these goodies... Reported-by:
Jan Beulich <JBeulich@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a1e91dx3apzqw5kbdt7ut21s@git.kernel.orgSigned-off-by:
-
Namhyung Kim authored
When thread__init_map_groups() fails, a new thread should be removed from the rbtree since it's gonna be freed. Also update last match cache only if the function succeeded. Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Namhyung Kim authored
When build with 'make ARCH=x86' and dwarf unwind is on, there is a compiling error: CC /home/wn/perf/arch/x86/util/unwind-libdw.o CC /home/wn/perf/arch/x86/tests/regs_load.o arch/x86/tests/regs_load.S: Assembler messages: arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push' arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop' make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24! make: *** [all] Error 2 ... Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT. 'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'. However, when building x86_64 kernel, ARCH=x86 is valid and commonly used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86' to build x86_64 perf, which causes mismatching. As __LP64__ is defined for x86_64 as well, we can consolidate the __x86_64__ check to the __LP64__ check and get rid of the IS_X86_64 IMHO. (This patch is made by Namhyung Kim when replying my v1 patch: https://lkml.org/lkml/2015/1/7/17 I modified the code to remove dependency on RAW_ARCH: https://lkml.org/lkml/2015/1/7/865 Namhyung Kim didn't provide his SOB in his original email. I add mine only for my modification.) Signed-off-by:
-
Namhyung Kim authored
When it failed to write probe commands to the probe_event file in debugfs, it needs to propagate the error code properly. Current code blindly uses the return value of the write(2) so it always uses -1 (-EPERM) and it might confuse users. Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420886028-15135-4-git-send-email-namhyung@kernel.orgSigned-off-by:
-
Kan Liang authored
cycles:p and cycles:pp do not work on SLM since commit: 86a04461 ("perf/x86: Revamp PEBS event selection") UOPS_RETIRED.ALL is not a PEBS capable event, so it should not be used to count cycle number. Actually SLM calls intel_pebs_aliases_core2() which uses INST_RETIRED.ANY_P to count the number of cycles. It's a PEBS capable event. But inv and cmask must be set to count cycles. Considering SLM allows all events as PEBS with no flags, only INST_RETIRED.ANY_P, inv=1, cmask=16 needs to handled specially. Signed-off-by:
Kan Liang <kan.liang@intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421084541-31639-1-git-send-email-kan.liang@intel.com Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Stephane Eranian authored
This patch fixes a problem with the initialization of the sysfs_show() routine for the RAPL PMU. The current code was wrongly relying on the EVENT_ATTR_STR() macro which uses the events_sysfs_show() function in the x86 PMU code. That function itself was relying on the x86_pmu data structure. Yet RAPL and the core PMU (x86_pmu) have nothing to do with each other. They should therefore not interact with each other. The x86_pmu structure is initialized at boot time based on the host CPU model. When the host CPU is not supported, the x86_pmu remains uninitialized and some of the callbacks it contains are NULL. The false dependency with x86_pmu could potentially cause crashes in case the x86_pmu is not initialized while the RAPL PMU is. This may, for instance, be the case in virtualized environments. This patch fixes the problem by using a private sysfs_show() routine for exporting the RAPL PMU events. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
- 15 Jan, 2015 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linuxLinus Torvalds authored
Pull thermal fixes from Zhang Rui: "Specifics: - bogus type qualifier fix in OF thermal code. - Minor fixes on imx and rcar thermal drivers. - Update TI SoC thermal maintainer entry. - Updated documentation of OF cpufreq cooling register" * 'thermal-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: rcar: Spelling/grammar: s/drier use .../driver uses ...s/ thermal: rcar: change type of ctemp in rcar_thermal_update_temp() thermal: rcar: fix ENR register value Documentation: thermal: document of_cpufreq_cooling_register() Thermal: imx: add clk disable/enable for suspend/resume MAINTAINERS: update ti-soc-thermal status MAINTAINERS: Add linux-omap to list of reviewers for TI Thermal thermal: of: Remove bogus type qualifier for of_thermal_get_trip_points()
-
- 14 Jan, 2015 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Don't use uninitialized data in IPVS, from Dan Carpenter. 2) conntrack race fixes from Pablo Neira Ayuso. 3) Fix TX hangs with i40e, from Jesse Brandeburg. 4) Fix budget return from poll calls in dnet and alx, from Eric Dumazet. 5) Fix bugus "if (unlikely(x) < 0)" test in AF_PACKET, from Christoph Jaeger. 6) Fix bug introduced by conversion to list_head in TIPC retransmit code, from Jon Paul Maloy. 7) Don't use GFP_NOIO under spinlock in USB kaweth driver, from Alexey Khoroshilov. 8) Fix bridge build with INET disabled, from Arnd Bergmann. 9) Fix netlink array overrun for PROBE attributes in openvswitch, from Thomas Graf. 10) Don't hold spinlock across synchronize_irq() in tg3 driver, from Prashant Sreedharan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) tg3: Release tp->lock before invoking synchronize_irq() tg3: tg3_reset_task() needs to use rtnl_lock to synchronize tg3: tg3_timer() should grab tp->lock before checking for tp->irq_sync team: avoid possible underflow of count_pending value for notify_peers and mcast_rejoin openvswitch: packet messages need their own probe attribtue i40e: adds FCoE configure option cxgb4vf: Fix queue allocation for 40G adapter netdevice: Add missing parentheses in macro bridge: only provide proxy ARP when CONFIG_INET is enabled neighbour: fix base_reachable_time(_ms) not effective immediatly when changed net: fec: fix MDIO bus assignement for dual fec SoC's xen-netfront: use different locks for Rx and Tx stats drivers: net: cpsw: fix multicast flush in dual emac mode cxgb4vf: Initialize mdio_addr before using it net: Corrected the comment describing the ndo operations to reflect the actual prototype for couple of operations usb/kaweth: use GFP_ATOMIC under spin_lock in usb_start_wait_urb() MAINTAINERS: add me as ibmveth maintainer tipc: fix bug in broadcast retransmit code update ip-sysctl.txt documentation (v2) net/at91_ether: prepare and unprepare clock ... -
David S. Miller authored
Prashant Sreedharan says: ==================== tg3: synchronize_irq() should be called without taking locks v2: Added Reported-by, Tested-by fields and reference to the thread that reported the problem This series addresses the problem reported by Peter Hurley in mail thread https://lkml.org/lkml/2015/1/12/1082 ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Prashant Sreedharan authored
synchronize_irq() can sleep waiting, for pending IRQ handlers so driver should release the tp->lock spin lock before invoking synchronize_irq() Reported-by:
Peter Hurley <peter@hurleysoftware.com> Tested-by:
Prashant Sreedharan <prashant@broadcom.com> Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
Prashant Sreedharan authored
Currently tg3_reset_task() uses only tp->lock for synchronizing with code paths like tg3_open() etc. But since tp->lock is released before doing synchronize_irq(), rtnl_lock should be taken in tg3_reset_task() to synchronize it with other code paths. Reported-by:
-
Prashant Sreedharan authored
This is to avoid the race between tg3_timer() and the execution paths which does not invoke tg3_timer_stop() and releases tp->lock before calling synchronize_irq() Reported-by:
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "Two bugfixes for arm64. I will have another pull request next week, but otherwise things are calm" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: arm64: KVM: Fix HCR setting for 32bit guests arm64: KVM: Fix TLB invalidation by IPA/VMID
-
Jiri Pirko authored
This patch is fixing a race condition that may cause setting count_pending to -1, which results in unwanted big bulk of arp messages (in case of "notify peers"). Consider following scenario: count_pending == 2 CPU0 CPU1 team_notify_peers_work atomic_dec_and_test (dec count_pending to 1) schedule_delayed_work team_notify_peers atomic_add (adding 1 to count_pending) team_notify_peers_work atomic_dec_and_test (dec count_pending to 1) schedule_delayed_work team_notify_peers_work atomic_dec_and_test (dec count_pending to 0) schedule_delayed_work team_notify_peers_work atomic_dec_and_test (dec count_pending to -1) Fix this race by using atomic_dec_if_positive - that will prevent count_pending running under 0. Fixes: fc423ff0 ("team: add peer notification") Fixes: 492b200e ("team: add support for sending multicast rejoins") Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Two small performance tweaks, the plumbing for the execveat system call and a couple of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/uprobes: fix user space PER events s390/bpf: Fix JMP_JGE_X (A > X) and JMP_JGT_X (A >= X) s390/bpf: Fix ALU_NEG (A = -A) s390/mm: avoid using pmd_to_page for !USE_SPLIT_PMD_PTLOCKS s390/timex: fix get_tod_clock_ext() inline assembly s390: wire up execveat syscall s390/kernel: use stnsm 255 instead of stosm 0 s390/vtime: Get rid of redundant WARN_ON s390/zcrypt: kernel oops at insmod of the z90crypt device driver
-
Thomas Graf authored
User space is currently sending a OVS_FLOW_ATTR_PROBE for both flow and packet messages. This leads to an out-of-bounds access in ovs_packet_cmd_execute() because OVS_FLOW_ATTR_PROBE > OVS_PACKET_ATTR_MAX. Introduce a new OVS_PACKET_ATTR_PROBE with the same numeric value as OVS_FLOW_ATTR_PROBE to grow the range of accepted packet attributes while maintaining to be binary compatible with existing OVS binaries. Fixes: 05da5898 ("openvswitch: Add support for OVS_FLOW_ATTR_PROBE.") Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Tracked-down-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Thomas Graf <tgraf@suug.ch> Reviewed-by:
Jesse Gross <jesse@nicira.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Vasu Dev authored
Adds FCoE config option I40E_FCOE, so that FCoE can be enabled as needed but otherwise have it disabled by default. This also eliminate multiple FCoE config checks, instead now just one config check for CONFIG_I40E_FCOE. The I40E FCoE was added with 3.17 kernel and therefore this patch shall be applied to stable 3.17 kernel also. CC: <stable@vger.kernel.org> Signed-off-by:
Vasu Dev <vasu.dev@intel.com> Tested-by:
Jim Young <jamesx.m.young@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
git://git.samba.org/jlayton/linuxLinus Torvalds authored
Pull file locking fix from Jeff Layton: "Just a simple bugfix for a regression that I introduced into v3.18 with the internal lease API overhaul -- mea culpa. Kudos to Linda and Neil for tracking this down and fixing it" * tag 'locks-v3.19-1' of git://git.samba.org/jlayton/linux: locks: fix NULL-deref in generic_delete_lease
-
Benjamin Poirier authored
For example, one could conceivably call for_each_netdev_in_bond_rcu(condition ? bond1 : bond2, slave) and get an unexpected result. Signed-off-by:
Benjamin Poirier <bpoirier@suse.de> Signed-off-by:
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fixes from Jens Axboe: "The major part is an update to the NVMe driver, fixing various issues around surprise removal and hung controllers. Most of that is from Keith, and parts are simple blk-mq fixes or exports/additions of minor functions to aid this effort, and parts are changes directly to the NVMe driver. Apart from the above, this contains: - Small blk-mq change from me, killing an unused member of the hardware queue structure. - Small fix from Ming Lei, fixing up a few drivers that didn't properly check for ERR_PTR() returns from blk_mq_init_queue()" * 'for-linus' of git://git.kernel.dk/linux-block: NVMe: Fix locking on abort handling NVMe: Start and stop h/w queues on reset NVMe: Command abort handling fixes NVMe: Admin queue removal handling NVMe: Reference count admin queue usage NVMe: Start all requests blk-mq: End unstarted requests on a dying queue blk-mq: Allow requests to never expire blk-mq: Add helper to abort requeued requests blk-mq: Let drivers cancel requeue_work blk-mq: Export if requests were started blk-mq: Wake tasks entering queue on dying blk-mq: get rid of ->cmd_size in the hardware queue block: fix checking return value of blk_mq_init_queue block: wake up waiters when a queue is marked dying NVMe: Fix double free irq blk-mq: Export freeze/unfreeze functions blk-mq: Exit queue on alloc failure -
Arnd Bergmann authored
When IPV4 support is disabled, we cannot call arp_send from the bridge code, which would result in a kernel link error: net/built-in.o: In function `br_handle_frame_finish': :(.text+0x59914): undefined reference to `arp_send' :(.text+0x59a50): undefined reference to `arp_tbl' This makes the newly added proxy ARP support in the bridge code depend on the CONFIG_INET symbol and lets the compiler optimize the code out to avoid the link error. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 95850116 ("bridge: Add support for IEEE 802.11 Proxy ARP") Cc: Kyeyoon Park <kyeyoonp@codeaurora.org> Signed-off-by:
-
Zhang Rui authored
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal into thermal-soc
-
Jean-Francois Remy authored
When setting base_reachable_time or base_reachable_time_ms on a specific interface through sysctl or netlink, the reachable_time value is not updated. This means that neighbour entries will continue to be updated using the old value until it is recomputed in neigh_period_work (which recomputes the value every 300*HZ). On systems with HZ equal to 1000 for instance, it means 5mins before the change is effective. This patch changes this behavior by recomputing reachable_time after each set on base_reachable_time or base_reachable_time_ms. The new value will become effective the next time the neighbour's timer is triggered. Changes are made in two places: the netlink code for set and the sysctl handling code. For sysctl, I use a proc_handler. The ipv6 network code does provide its own handler but it already refreshes reachable_time correctly so it's not an issue. Any other user of neighbour which provide its own handlers must refresh reachable_time. Signed-off-by:Jean-Francois Remy <jeff@melix.org> Signed-off-by:
-
Stefan Agner authored
On i.MX28, the MDIO bus is shared between the two FEC instances. The driver makes sure that the second FEC uses the MDIO bus of the first FEC. This is done conditionally if FEC_QUIRK_ENET_MAC is set. However, in newer designs, such as Vybrid or i.MX6SX, each FEC MAC has its own MDIO bus. Simply removing the quirk FEC_QUIRK_ENET_MAC is not an option since other logic, triggered by this quirk, is still needed. Furthermore, there are board designs which use the same MDIO bus for both PHY's even though the second bus would be available on the SoC side. Such layout are popular since it saves pins on SoC side. Due to the above quirk, those boards currently do work fine. The boards in the mainline tree with such a layout are: - Freescale Vybrid Tower with TWR-SER2 (vf610-twr.dts) - Freescale i.MX6 SoloX SDB Board (imx6sx-sdb.dts) This patch adds a new quirk FEC_QUIRK_SINGLE_MDIO for i.MX28, which makes sure that the MDIO bus of the first FEC is used in any case. However, the boards above do have a SoC with a MDIO bus for each FEC instance. But the PHY's are not connected in a 1:1 configuration. A proper device tree description is needed to allow the driver to figure out where to find its PHY. This patch fixes that shortcoming by adding a MDIO bus child node to the first FEC instance, along with the two PHY's on that bus, and making use of the phy-handle property to add a reference to the PHY's. Acked-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
